The qspi controller on sama5d2 and sam9x60 supports "classic" SPI mode
without spi-mem enhancements and accelerations, very similar to the old
SPI controller on sam9g20 or the modern flexcom controllers of the same
SoC family.
Register interface differs somewhat, especially because only one
hardware controlled CS line is supported. Some fields are missing, some
are in different registers, but in principal it works similar. So code
is very much inspired by the old atmel-spi driver.
Tested on sam9x60 with a non-mainline driver to configure an FPGA.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Switching between Serial Memory Mode (SMM) and (classic) SPI mode is a
preparation for implementing .xfer() in the future.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
The Serial Memory Mode (SMM) is enabled with atmel_qspi_set_cfg() on
each invocation of atmel_qspi_exec_op(). Setting SMM through
atmel_qspi_init() at probe time is redundant.
Removing the SMM setting at probe time should therefore 1) be safe to do
and 2) allows for setting it to a different value in a future
implementation of .xfer() which needs to disable SMM.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Port these commits:
- v6.11-rc5-90-g329ca3eed4a9a ("spi: atmel-quadspi: Avoid overwriting delay register settings")
- v6.12-rc1-1-g162d9b5d2308c ("spi: atmel-quadspi: Fix wrong register value written to MR").
- v6.13-rc2-27-gf663898d047a7 ("spi: atmel-quadspi: Factor out switching to Serial Memory Mode to function")
Cc: Csókás Bence <csokas.bence@prolan.hu>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Port changes from a 4 piece patch series from Linux kernel v5.10, merged
with v5.10-rc1-83-gc732b7567d869 ("Merge series "spi: atmel-quadspi: Fix
AHB memory accesses" from Tudor Ambarus …").
Port the single fix v5.15-rc1-14-g09134c5322df9 ("spi: Fixed division by
zero warning").
Reduces differences between linux and u-boot driver.
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: Yoshitaka Ikeda <ikeda@nskint.co.jp>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Most other spi-mem drivers also depend on SPI_MEM. Fixes this build
error:
arm-v5te-linux-gnueabi-ld.bfd: drivers/spi/atmel-quadspi.o: in function `atmel_qspi_supports_op':
/mnt/data/adahl/src/u-boot/drivers/spi/atmel-quadspi.c:460: undefined reference to `spi_mem_default_supports_op'
make[1]: *** [/mnt/data/adahl/src/u-boot/Makefile:1821: u-boot] Error 1
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This is inside of an 'if DM_SPI' block, and thus always true.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
At present the 'ut' command handles its flags in a strange way, in that
they must come after the subcommand.
So, we must use 'ut bloblist -r2' to run the bloblist tests twice. This
is an artefact of the way tests were run, through subcommands.
It is now possible to correct this, by doing flag-processing before
running the suite.
Update the code to handle this, so that 'ut -r2 bloblist' works. Update
the 'test_suite' test to check the new arguments.
Add a sanity-check for -I while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the logic from this function into run_suite(), on the way to having
flag parsing in the top-level 'ut' command instead of its children.
Signed-off-by: Simon Glass <sjg@chromium.org>
Enhance the ut command to accept a comma-separated list of test suites
to run. Report the summary information for these at the end.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that everything is using the new test-suite features, drop support
for running commands.
Fix a missing closing-bracket while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
These tests run three different checks on the nodes, but the logic is
currently all in one tests.
Split the code out into three different tests, which do different setup
and then run the same checks.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Fix the comment abotu 'environment' while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the helpers provided for this purpose, rather than different ones in
this particular test.
Leave fdt_getprop_str() alone as it seems to have more value.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the init code into a separate function since it is quite large.
Adjust it to use unit-test functions which have become available since
the test was written.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having this condition defined separately for each suite,
bracket all options with 'if UNIT_TEST'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites need things to be set up before they can run. Add a way to
declare an init function using the UNIT_TEST_INIT() macro. The init
function is just like any other test, but is always placed first so that
it runs before all the other test functions in the suite.
Add an uninit function as well, to clean up after the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
When tests are all in the same suite it is annoying to have to read all
the common text after each name. Skip this to help the user.
Signed-off-by: Simon Glass <sjg@chromium.org>
Show the average duration of a test, so we can keep track of how it is
trending. Report the suite with the longest average test to encourage
people to improve it.
Add a function to update the stats based on the results from a single
suite and another to show the summary information.
Make this optional, since sandbox's SPL tests do not have a timer driver
and people may want to print results without times.
Signed-off-by: Simon Glass <sjg@chromium.org>
Show the time taken by each test suite with 'ut all' and the total time
for all suites.
Take care to remove any sandbox time-offset from the values.
Fix the comment-format on timer_test_add_offset() while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
All tests should belong to a suite, but if there is a suite we don't
know about (e.g. not added to cmd_ut.c) then the totals will not add up.
Add a check for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This test does not appear to use sandbox's memory-mapped I/O so there is
no need to enable it.
Even if there were a need, it should be disabled at the end of the test,
so as not to affect other tests.
Drop these lines from the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Harrison Mutai <harrison.mutai@arm.com> says:
This series of patches enhances the vexpress64 platform by enabling bloblist
support. It also introduces support for CONFIG_BLOBLIST_PASSAGE. This is
necessary to boot vexpress64 and other boards without manually specifying a
fixed address and size for the bloblist.
After this change, all the bloblist init modes are supported (i.e., fixed,
alloc, passage) and Vexpress64 boots with CONFIG_BLOBLIST_PASSAGE.
Link: https://lore.kernel.org/r/20250204175844.19890-1-harrison.mutai@arm.com
Enable bloblist on vexpress64 platforms to facilitate information
passing from TF-A using the firmware handoff framework.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
When the configuration option CONFIG_BLOBLIST_PASSAGE is selected, the
bloblist present in the incoming standard passage is utilised in-place.
There is no need to specify the size of the bloblist as the system
automatically detects it using the header information.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
When booting into the Linux kernel with semi-hosting, use the device
tree provided by hardware unless one is provided in the current
directory.
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
u-boot-dfu-20250211:
CI:
- https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/24556
Android:
- Handle boot images with missing DTB
Usb gadget:
- Fix nullptr in g_dnl when serial# is unset
- Add missing schedule() in f_mass_storage gadget
- Add support for STih407 in dwc3-generic
- Fix usb clocks on STih407
- Migrate STih407 to DM_USB_GADGET
- Check return value of xrealloc for NULL.
- Free allocated memory and return NULL if xrealloc fails.
- Prevent NULL pointer dereference in strlen and strcat.
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
- Check return value of malloc_cache_aligned for presskey and sha.
- Return -ENOMEM if memory allocation fails.
- Free allocated memory in error paths."
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
Dynamic memory, referenced by 'line', is allocated by calling
function 'calloc' and lost when the function terminates with code -1.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Dynamic memory, referenced by 'line', is allocated at ublimage.c:159
by calling function 'getline' and lost at ublimage.c:184.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
Report of the static analyzer:
1. NULL_AFTER_DEREF Pointer 'str', which is dereferenced at
image-host.c:688 by calling function 'strdup', is compared to a NULL
value at image-host.c:691.
2. NULL_AFTER_DEREF Pointer 'list', which is dereferenced at
image-host.c:689, is compared to a NULL value at image-host.c:691.
Corrections explained:
1. Checking for NULL before using pointers: The if (!list || !str) check
is now performed before calling strdup and realloc, which prevents
null pointer dereferences.
2. Checking the result of strdup: strdup can return NULL if memory
allocation fails. This also needs to be checked.
3. Checking the result of realloc: If realloc returns NULL, then memory
has not been allocated and dup must be freed to avoid memory leaks.
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
