Troy Kisky 1adb406b01 phy: add phy_find_by_mask/phy_connect_dev ...

It is useful to be able to try a range of
possible phy addresses to connect.

Also, an ethernet device is not required
to use phy_find_by_mask leading to better
separation of mii vs ethernet, as suggested
by Andy Fleming.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

2013-01-28 06:57:50 +01:00

..

atheros.c

net/: sparse fixes

2012-11-04 11:00:36 -07:00

broadcom.c

phylib: Add a bunch of PHY drivers from tsec

2011-04-20 15:09:34 -05:00

davicom.c

phylib: Add a bunch of PHY drivers from tsec

2011-04-20 15:09:34 -05:00

generic_10g.c

phylib: Detect link on 10G devices correctly

2011-07-27 23:21:25 +02:00

lxt.c

phylib: Add a bunch of PHY drivers from tsec

2011-04-20 15:09:34 -05:00

Makefile

net/phy: support the mv88e6352 switch

2012-09-27 12:21:56 -05:00

marvell.c

phy: Add support for Marvell 88E1118R

2012-12-15 12:28:22 -06:00

micrel.c

net: phy: micrel: make ksz9021 phy accessible

2012-07-11 13:15:30 -05:00

miiphybb.c

Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC

2010-10-29 21:32:07 +02:00

mv88e61xx.c

mv88e61xx: refactor PHY and SWITCH level-code

2013-01-09 04:12:10 +05:30

mv88e61xx.h

mv88e61xx: refactor PHY and SWITCH level-code

2013-01-09 04:12:10 +05:30

mv88e6352.c

net/phy: support the mv88e6352 switch

2012-09-27 12:21:56 -05:00

natsemi.c

phylib: Add a bunch of PHY drivers from tsec

2011-04-20 15:09:34 -05:00

phy.c

phy: add phy_find_by_mask/phy_connect_dev

2013-01-28 06:57:50 +01:00

realtek.c

phylib: Add a bunch of PHY drivers from tsec

2011-04-20 15:09:34 -05:00

smsc.c

phy: Add support for SMSC LAN87xx PHYs

2011-12-05 23:07:59 +01:00

teranetics.c

powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)

2011-10-20 16:01:37 -05:00

vitesse.c

drivers/net/: sparse fixes

2012-11-04 11:00:36 -07:00