mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-02 09:46:37 +03:00
5b6dba2924
signed_hdmi_imx8m.bin is already signed and has a IVT header. It should not be put in u-boot-spl-mkimage.signed.bin. Move it to head of flash.bin following NXP imx-mkimage. Keeping it in u-boot-spl-mkimage.signed.bin also consumes a lot of TCM space which is not expected. While moving it to head of flash.bin, other changes are required, u-boot.itb is put at sector 768 per defconfig, so u-boot.itb binman offset should be updated and it should be moved out from binman section. Also binman symbol address are updated, so need to subtract u-boot-spl image_pos + CONFIG_SPL_TEXT_BASE to find the correct location of ddr phy firmware. Because there is 1KB padding in HDMI firmware, use 32KB when burning flash.bin to sd card. Signed-off-by: Peng Fan <peng.fan@nxp.com>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.