mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 15:03:58 +03:00
9c29afe0cc
Martyn Welch <martyn.welch@collabora.com> says: This series adds DFU support for TI AM62 SK and beagleplay boards. I have picked this series up from Sjoerd due to time constraints. Since the last revision: * Removed dwc3 mode setting in favour of reinstating forced peripheral mode for usb0 * Use of config fragments for both r5 and a53 DFU configuration to reduce duplication * Typographical improvements to documentation We plan to also submit the dts changes to linux so that those can be dropped again in the near future (hopefully)
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.