Files
u-boot/include/configs
Peng Fan 3b9c1a5dc0 imx:mx6slevk add board level support for usb
Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode

There are two usb port on mx6slevk board:
1. otg port
2. host port
The following are the connection between usb controller and board usb
interface, host port has not ID pin set:
otg1 core <---> board otg port
otg2 core <---> board host port
In order to make host port work, board_usb_phy_mode return USB_INIT_HOST
to let host port work in host mode.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <B37916@freescale.com>
2014-11-14 20:56:58 +01:00
..
2014-10-22 09:30:55 -07:00
2014-02-07 08:14:33 -05:00
2014-10-27 14:35:54 +01:00
2014-08-30 07:46:40 -04:00
2014-05-13 19:43:01 -04:00
2014-04-20 13:16:43 +02:00
2014-10-27 17:54:13 -04:00
2014-10-10 09:44:44 -04:00
2014-06-05 17:01:58 -04:00
2014-09-22 16:15:04 +02:00
2014-09-22 15:47:19 +02:00
2014-04-28 10:45:55 +02:00
2014-04-28 10:45:55 +02:00
2014-10-27 17:54:13 -04:00
2014-10-27 17:54:13 -04:00
2014-10-27 17:54:13 -04:00
2014-10-27 17:54:13 -04:00
2014-10-27 17:54:13 -04:00
2014-10-27 17:54:13 -04:00
2014-10-23 10:02:16 +02:00
2014-10-10 09:44:44 -04:00
2014-10-10 09:44:44 -04:00
2013-12-09 13:21:47 +01:00
2013-12-09 13:21:47 +01:00
2013-12-09 13:21:47 +01:00
2014-10-27 17:54:13 -04:00
2014-11-07 16:32:02 +01:00
2014-10-22 10:36:48 -06:00
2014-10-01 07:05:09 -04:00
2014-11-07 16:32:02 +01:00
2014-11-13 14:49:02 +01:00
2014-05-27 18:22:24 +04:00
2014-04-28 10:45:56 +02:00
2014-10-10 09:44:44 -04:00
2014-10-30 10:06:34 +01:00
2014-02-06 04:48:15 +01:00
2014-10-22 10:36:48 -06:00