mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 06:59:41 +03:00
397a14dd71
Caleb Ethridge <caleb.ethridge@analog.com> says: This series performs a general cleanup of the default U-boot environment for sc5xx boards, stemming from the decision to no longer store the environment in the SPI flash. The environments for each board have been edited to contain the minimum number of commands needed for all supported boot modes to avoid confusion, and the default boot command synced to spi for all boards that support it. The filesystem for the SPI flash has also been changed from jffs2 to ubifs. A bug with the Ethernet reset line on the sc594 has been fixed, and the sc573 has been renamed from the EZKIT to the EZLITE to match the name of the publically available board. EZKIT was only used internally before release. Preliminary binman support for sc5xx boards has been removed as it was unused and full support never added. Link: https://lore.kernel.org/r/cover.1779370141.git.caleb.ethridge@analog.com
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.