mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 15:03:58 +03:00
4839ba9045
Switch to the upstream device tree, which already includes the UART nodes we need for the DM. We also need to increase malloc area before relocation otherwise you'll get the following error and the board panics: DRAM: Initializing....using SPD alloc space exhausted ptr 414 limit 400 Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Peng Fan <peng.fan@nxp.com>
112 lines
2.7 KiB
Plaintext
112 lines
2.7 KiB
Plaintext
CONFIG_PPC=y
|
|
CONFIG_TEXT_BASE=0xEFF40000
|
|
CONFIG_SYS_MALLOC_LEN=0x100000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x600
|
|
CONFIG_SF_DEFAULT_SPEED=10000000
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_ENV_SECT_SIZE=0x20000
|
|
CONFIG_DEFAULT_DEVICE_TREE="fsl/p2041rdb"
|
|
CONFIG_SYS_MONITOR_LEN=786432
|
|
CONFIG_ENV_ADDR=0xEFF20000
|
|
CONFIG_MPC85xx=y
|
|
CONFIG_SYS_INIT_RAM_LOCK=y
|
|
CONFIG_SYS_SRIO=y
|
|
CONFIG_SRIO1=y
|
|
CONFIG_SRIO2=y
|
|
CONFIG_SRIO_PCIE_BOOT_MASTER=y
|
|
CONFIG_TARGET_P2041RDB=y
|
|
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
|
|
CONFIG_ENABLE_36BIT_PHYS=y
|
|
CONFIG_SYS_BOOK3E_HV=y
|
|
CONFIG_SYS_CACHE_STASHING=y
|
|
CONFIG_USE_UBOOTPATH=y
|
|
CONFIG_PCIE1=y
|
|
CONFIG_PCIE2=y
|
|
CONFIG_PCIE3=y
|
|
CONFIG_SYS_FSL_NUM_CC_PLLS=2
|
|
CONFIG_MP=y
|
|
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
|
|
CONFIG_FIT=y
|
|
CONFIG_FIT_VERBOSE=y
|
|
CONFIG_BOOTDELAY=10
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
CONFIG_OF_STDOUT_VIA_ALIAS=y
|
|
CONFIG_USE_BOOTCOMMAND=y
|
|
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
|
|
CONFIG_SYS_PBSIZE=276
|
|
CONFIG_BOARD_EARLY_INIT_F=y
|
|
CONFIG_BOARD_EARLY_INIT_R=y
|
|
CONFIG_ID_EEPROM=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_IMLS=y
|
|
CONFIG_CMD_GREPENV=y
|
|
CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
|
|
CONFIG_CMD_DM=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_LOADS_ECHO=y
|
|
CONFIG_SYS_LOADS_BAUD_CHANGE=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_EXT2=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_OF_UPSTREAM=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_ENV_IS_IN_FLASH=y
|
|
CONFIG_USE_BOOTFILE=y
|
|
CONFIG_BOOTFILE="uImage"
|
|
CONFIG_USE_ETHPRIME=y
|
|
CONFIG_ETHPRIME="FM1@DTSEC1"
|
|
CONFIG_USE_ROOTPATH=y
|
|
CONFIG_FSL_SATA_V2=y
|
|
CONFIG_SYS_SATA_MAX_DEVICE=2
|
|
CONFIG_FSL_CAAM=y
|
|
CONFIG_SYS_BR0_PRELIM_BOOL=y
|
|
CONFIG_SYS_BR0_PRELIM=0xE8001001
|
|
CONFIG_SYS_OR0_PRELIM=0xF8000F85
|
|
CONFIG_SYS_BR3_PRELIM_BOOL=y
|
|
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
|
|
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
|
|
CONFIG_SYS_I2C_FSL=y
|
|
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
|
|
CONFIG_FSL_ESDHC=y
|
|
CONFIG_MTD=y
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
CONFIG_FLASH_CFI_DRIVER=y
|
|
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
|
CONFIG_SYS_FLASH_EMPTY_INFO=y
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
CONFIG_SYS_FLASH_QUIET_TEST=y
|
|
CONFIG_SYS_MAX_FLASH_SECT=1024
|
|
CONFIG_DM_SPI_FLASH=y
|
|
CONFIG_SPI_FLASH_SPANSION=y
|
|
CONFIG_DM_MDIO=y
|
|
CONFIG_PHY_GIGE=y
|
|
CONFIG_E1000=y
|
|
CONFIG_FMAN_ENET=y
|
|
CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000
|
|
CONFIG_MII=y
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PHYLIB_10G=y
|
|
CONFIG_PHY_TERANETICS=y
|
|
CONFIG_PHY_VITESSE=y
|
|
CONFIG_PCIE_FSL=y
|
|
CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
|
|
CONFIG_DM_SERIAL=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_FSL_ESPI=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_EHCI_FSL=y
|
|
CONFIG_USB_MAX_CONTROLLER_COUNT=2
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_ADDR_MAP=y
|
|
CONFIG_SYS_NUM_ADDR_MAP=64
|
|
CONFIG_POST=y
|