u-boot/arch/arm/dts/imx8mq-u-boot.dtsi

// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2021 NXP
 */

/ {
	binman: binman {
	};

	imx8mq-cm4 {
		compatible = "fsl,imx8mq-cm4";
		syscon = <&src>;
	};
};

&soc {
	bootph-pre-ram;
};

&aips1 {
	bootph-pre-ram;
};

&aips2 {
	bootph-pre-ram;
};

&aips3 {
	bootph-pre-ram;
};

&aips4 {
	bootph-pre-ram;
};

&iomuxc {
	bootph-pre-ram;
};

&binman {
	filename = "flash.bin";
	section {
		pad-byte = <0x00>;
		/*
		 * signed_hdmi_imx8m.bin contains a 1KB zero-filled padding at
		 * its beginning. This padding has no functional purpose, but
		 * the firmware is provided and signed by NXP, so the head
		 * must be preserved and should not be removed.
		 *
		 * When the signed HDMI firmware is placed at the beginning of
		 * flash.bin, the IVT header of u-boot-spl must still reside at
		 * a 4KB-aligned address. Since flash.bin starts with the HDMI
		 * firmware (including its 1KB padding), there is already a 1KB
		 * empty region at the head of flash.bin.
		 *
		 * The required 4KB alignment is therefore calculated relative
		 * to the location after this 1KB padding. To achieve this, we
		 * explicitly set align and align-size to 0x1000, and add an
		 * additional 0x400 (1KB) fill to account for the padding.
		 */
		signed-hdmi-imx8m {
			filename = "signed_hdmi_imx8m.bin";
			type = "blob-ext";
			align = <0x1000>;
			align-size = <0x1000>;
		};

		fill {
			size = <0x400>;
		};

#ifdef CONFIG_IMX_HAB
		nxp-imx8mcst@0 {
			filename = "u-boot-spl-mkimage.signed.bin";
			nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
			nxp,unlock;
			args;	/* Needed by mkimage etype superclass */
#endif

			binman_imx_spl: nxp-imx8mimage {
			filename = "u-boot-spl-mkimage.bin";
			nxp,boot-from = "sd";
			nxp,rom-version = <1>;
			nxp,loader-address = <CONFIG_SPL_TEXT_BASE>;
			args;	/* Needed by mkimage etype superclass */

			section {
				align = <4>;
				align-size = <4>;
				filename = "u-boot-spl-ddr.bin";
				pad-byte = <0xff>;

				u-boot-spl {
					align-end = <4>;
					filename = "u-boot-spl.bin";
				};

				ddr-1d-imem-fw {
					filename = "lpddr4_pmu_train_1d_imem.bin";
					align-end = <4>;
					type = "blob-ext";
				};

				ddr-1d-dmem-fw {
					filename = "lpddr4_pmu_train_1d_dmem.bin";
					align-end = <4>;
					type = "blob-ext";
				};

				ddr-2d-imem-fw {
					filename = "lpddr4_pmu_train_2d_imem.bin";
					align-end = <4>;
					type = "blob-ext";
				};

				ddr-2d-dmem-fw {
					filename = "lpddr4_pmu_train_2d_dmem.bin";
					align-end = <4>;
					type = "blob-ext";
				};
			};
		};
#ifdef CONFIG_IMX_HAB
		};
#endif
	};

#ifdef CONFIG_IMX_HAB
	nxp-imx8mcst@1 {
		filename = "u-boot-fit.signed.bin";
		nxp,loader-address = <CONFIG_SPL_LOAD_FIT_ADDRESS>;
		offset = <0x58400>;
		args;	/* Needed by mkimage etype superclass */
#endif

		binman_imx_fit: fit {
			description = "Configuration to load ATF before U-Boot";
			filename = "u-boot.itb";
#ifndef CONFIG_IMX_HAB
			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
#endif
			#address-cells = <1>;

			offset = <0x58000>;

			images {
				uboot {
					arch = "arm64";
					compression = "none";
					description = "U-Boot (64-bit)";
					load = <CONFIG_TEXT_BASE>;
					type = "standalone";

					uboot-blob {
						filename = "u-boot-nodtb.bin";
						type = "blob-ext";
					};
				};

#ifndef CONFIG_ARMV8_PSCI
				atf {
					arch = "arm64";
					compression = "none";
					description = "ARM Trusted Firmware";
					entry = <0x910000>;
					load = <0x910000>;
					type = "firmware";

					atf-blob {
						filename = "bl31.bin";
						type = "blob-ext";
					};
				};
#endif

				tee: tee {
					description = "OP-TEE";
					type = "tee";
					arch = "arm64";
					compression = "none";
					os = "tee";
					load = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>;
					entry = <CONFIG_IMX8M_OPTEE_LOAD_ADDR>;

					tee-os {
						filename = "tee.bin";
						optional;
					};
				};

				fdt {
					compression = "none";
					description = "NAME";
					type = "flat_dt";

					uboot-fdt-blob {
						filename = "u-boot.dtb";
						type = "blob-ext";
					};
				};
			};

			configurations {
				default = "conf";

				conf {
					description = "NAME";
					fdt = "fdt";
					firmware = "uboot";
#ifndef CONFIG_ARMV8_PSCI
					loadables = "atf", "tee";
#endif
				};
			};
		};
#ifdef CONFIG_IMX_HAB
	};
#endif
};