Files
u-boot/drivers
Haibo Chen 7f6a2e6e0f i2c: correct I2C deblock logic
Current code use dm_gpio_get_value() to get SDA and SCL value, and the
value depends on whether DTS file config the GPIO_ACTIVE_LOW. In ususal
case for i2c GPIO, DTS need to set GPIO_ACTIVE_LOW for SCL/SDA pins. So
here the logic is not correct.

And we must not use GPIOD_ACTIVE_LOW in client code include the
dm_gpio_set_dir_flags(), it is DTS's responsibility for this flag. So
remove GPIOD_ACTIVE_LOW here.

Fixes: aa54192d4a ("dm: i2c: implement gpio-based I2C deblock")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Alexander Kochetkov <al.kochet@gmail.com <mailto:al.kochet@gmail.com>>
2023-04-11 06:44:39 +02:00
..
2023-03-03 09:49:02 -05:00
2023-02-10 07:41:39 -05:00
2021-10-05 08:50:15 -04:00
2022-09-16 11:05:16 -04:00
2022-01-13 07:57:49 -05:00
2023-04-11 06:44:39 +02:00
2023-04-10 12:17:58 +09:00
2023-03-09 13:15:00 +01:00
2023-03-02 17:45:58 -05:00
2023-01-20 12:27:24 -05:00
2023-04-03 16:45:41 -04:00
2023-04-01 10:11:50 +02:00
2023-01-24 13:55:05 +01:00
2023-04-03 16:45:41 -04:00
2022-10-11 16:03:03 -04:00
2023-03-27 15:19:57 -04:00
2023-02-10 07:41:41 -05:00
2023-03-02 17:45:58 -05:00