mirror of
https://github.com/avrdudes/avrdude.git
synced 2026-06-02 09:46:34 +03:00
Reformat spacing/comments in src/stk500v2_private.h
This commit is contained in:
Stefan Rueger
@@ -1,11 +1,11 @@
|
||||
//**** ATMEL AVR - A P P L I C A T I O N N O T E ************************
|
||||
//*
|
||||
//* Title: AVR068 - STK500 Communication Protocol
|
||||
//* Filename: command.h
|
||||
//* Version: 1.0
|
||||
//* Last updated: 10.01.2005
|
||||
//* Title: AVR068 - STK500 Communication Protocol
|
||||
//* Filename: command.h
|
||||
//* Version: 1.0
|
||||
//* Last updated: 10.01.2005
|
||||
//*
|
||||
//* Support E-mail: avr@atmel.com
|
||||
//* Support E-mail: avr@atmel.com
|
||||
//*
|
||||
//**************************************************************************
|
||||
|
||||
@@ -27,7 +27,6 @@
|
||||
#define CMD_LOAD_RC_ID_TABLE 0x0E
|
||||
#define CMD_LOAD_EC_ID_TABLE 0x0F
|
||||
|
||||
|
||||
// *****************[ STK ISP command constants ]******************************
|
||||
|
||||
#define CMD_ENTER_PROGMODE_ISP 0x10
|
||||
@@ -43,10 +42,9 @@
|
||||
#define CMD_READ_LOCK_ISP 0x1A
|
||||
#define CMD_READ_SIGNATURE_ISP 0x1B
|
||||
#define CMD_READ_OSCCAL_ISP 0x1C
|
||||
#define CMD_SPI_MULTI 0x1D /* STK500v2, AVRISPmkII,
|
||||
* JTAGICEmkII */
|
||||
#define CMD_SET_SCK 0x1D /* JTAGICE3 */
|
||||
#define CMD_GET_SCK 0x1E /* JTAGICE3 */
|
||||
#define CMD_SPI_MULTI 0x1D // STK500v2, AVRISPmkII, JTAGICEmkII
|
||||
#define CMD_SET_SCK 0x1D // JTAGICE3
|
||||
#define CMD_GET_SCK 0x1E // JTAGICE3
|
||||
|
||||
// *****************[ STK PP command constants ]*******************************
|
||||
|
||||
@@ -81,8 +79,7 @@
|
||||
#define CMD_READ_LOCK_HVSP 0x3A
|
||||
#define CMD_READ_SIGNATURE_HVSP 0x3B
|
||||
#define CMD_READ_OSCCAL_HVSP 0x3C
|
||||
// These two are redefined since 0x30/0x31 collide
|
||||
// with the STK600 bootloader.
|
||||
// These two are redefined since 0x30/0x31 collide with the STK600 bootloader
|
||||
#define CMD_ENTER_PROGMODE_HVSP_STK600 0x3D
|
||||
#define CMD_LEAVE_PROGMODE_HVSP_STK600 0x3E
|
||||
|
||||
@@ -91,14 +88,12 @@
|
||||
#define CMD_XPROG 0x50
|
||||
#define CMD_XPROG_SETMODE 0x51
|
||||
|
||||
|
||||
// *** AVR32 JTAG Programming command ***
|
||||
|
||||
#define CMD_JTAG_AVR32 0x80
|
||||
#define CMD_ENTER_PROGMODE_JTAG_AVR32 0x81
|
||||
#define CMD_LEAVE_PROGMODE_JTAG_AVR32 0x82
|
||||
|
||||
|
||||
// *** AVR JTAG Programming command ***
|
||||
|
||||
#define CMD_JTAG_AVR 0x90
|
||||
@@ -171,24 +166,23 @@
|
||||
// Set to '1' if board draws excessive current
|
||||
|
||||
// *****************[ STK parameter constants ]***************************
|
||||
#define PARAM_BUILD_NUMBER_LOW 0x80 /* ??? */
|
||||
#define PARAM_BUILD_NUMBER_HIGH 0x81 /* ??? */
|
||||
#define PARAM_BUILD_NUMBER_LOW 0x80 // ???
|
||||
#define PARAM_BUILD_NUMBER_HIGH 0x81 // ???
|
||||
#define PARAM_HW_VER 0x90
|
||||
#define PARAM_SW_MAJOR 0x91
|
||||
#define PARAM_SW_MINOR 0x92
|
||||
#define PARAM_VTARGET 0x94
|
||||
#define PARAM_VADJUST 0x95 /* STK500 only */
|
||||
#define PARAM_OSC_PSCALE 0x96 /* STK500 only */
|
||||
#define PARAM_OSC_CMATCH 0x97 /* STK500 only */
|
||||
#define PARAM_SCK_DURATION 0x98 /* STK500 only */
|
||||
#define PARAM_TOPCARD_DETECT 0x9A /* STK500 only */
|
||||
#define PARAM_STATUS 0x9C /* STK500 only */
|
||||
#define PARAM_DATA 0x9D /* STK500 only */
|
||||
#define PARAM_RESET_POLARITY 0x9E /* STK500 only, and STK600 FW
|
||||
* version <= 2.0.3 */
|
||||
#define PARAM_VADJUST 0x95 // STK500 only
|
||||
#define PARAM_OSC_PSCALE 0x96 // STK500 only
|
||||
#define PARAM_OSC_CMATCH 0x97 // STK500 only
|
||||
#define PARAM_SCK_DURATION 0x98 // STK500 only
|
||||
#define PARAM_TOPCARD_DETECT 0x9A // STK500 only
|
||||
#define PARAM_STATUS 0x9C // STK500 only
|
||||
#define PARAM_DATA 0x9D // STK500 only
|
||||
#define PARAM_RESET_POLARITY 0x9E // STK500 only, and STK600 FW version <= 2.0.3
|
||||
#define PARAM_CONTROLLER_INIT 0x9F
|
||||
|
||||
/* STK600 parameters */
|
||||
// STK600 parameters
|
||||
#define PARAM_STATUS_TGT_CONN 0xA1
|
||||
#define PARAM_DISCHARGEDELAY 0xA4
|
||||
#define PARAM_SOCKETCARD_ID 0xA5
|
||||
@@ -220,34 +214,28 @@
|
||||
#define PARAM2_RC_ID_TABLE_REV 0xC8
|
||||
#define PARAM2_EC_ID_TABLE_REV 0xC9
|
||||
|
||||
/* STK600 XPROG section */
|
||||
// STK600 XPROG section
|
||||
|
||||
// XPROG modes
|
||||
#define XPRG_MODE_PDI 0
|
||||
#define XPRG_MODE_JTAG 1
|
||||
#define XPRG_MODE_TPI 2
|
||||
|
||||
// Write mode flags
|
||||
#define XPRG_MEM_WRITE_ERASE 0
|
||||
#define XPRG_MEM_WRITE_WRITE 1
|
||||
#define XPRG_MEM_WRITE_ERASE 0
|
||||
#define XPRG_MEM_WRITE_WRITE 1
|
||||
|
||||
// CRC types
|
||||
#define XPRG_CRC_APP 1
|
||||
#define XPRG_CRC_BOOT 2
|
||||
#define XPRG_CRC_FLASH 3
|
||||
#define XPRG_CRC_APP 1
|
||||
#define XPRG_CRC_BOOT 2
|
||||
#define XPRG_CRC_FLASH 3
|
||||
|
||||
// *****************[ STK answer constants ]***************************
|
||||
|
||||
#define ANSWER_CKSUM_ERROR 0xB0
|
||||
|
||||
/*
|
||||
* Private data for this programmer.
|
||||
*/
|
||||
struct pdata
|
||||
{
|
||||
/*
|
||||
* See stk500pp_read_byte() for an explanation of the flash and
|
||||
* EEPROM page caches.
|
||||
*/
|
||||
struct pdata {
|
||||
// See stk500pp_read_byte() for an explanation of the flash and EEPROM page caches
|
||||
unsigned char *flash_pagecache;
|
||||
unsigned long flash_pageaddr;
|
||||
unsigned int flash_pagesize;
|
||||
@@ -258,62 +246,59 @@ struct pdata
|
||||
|
||||
unsigned char command_sequence;
|
||||
|
||||
enum
|
||||
{
|
||||
PGMTYPE_UNKNOWN,
|
||||
PGMTYPE_STK500,
|
||||
PGMTYPE_AVRISP,
|
||||
PGMTYPE_AVRISP_MKII,
|
||||
PGMTYPE_JTAGICE_MKII,
|
||||
PGMTYPE_STK600,
|
||||
PGMTYPE_JTAGICE3
|
||||
}
|
||||
pgmtype;
|
||||
enum {
|
||||
PGMTYPE_UNKNOWN,
|
||||
PGMTYPE_STK500,
|
||||
PGMTYPE_AVRISP,
|
||||
PGMTYPE_AVRISP_MKII,
|
||||
PGMTYPE_JTAGICE_MKII,
|
||||
PGMTYPE_STK600,
|
||||
PGMTYPE_JTAGICE3
|
||||
} pgmtype;
|
||||
|
||||
int is_scratchmonkey, scratchmonkey_leds;
|
||||
|
||||
/* Get/set flags for Xplained Mini SUFFER register */
|
||||
// Get/set flags for Xplained Mini SUFFER register
|
||||
bool suffer_get;
|
||||
bool suffer_set;
|
||||
unsigned char suffer_data[2];
|
||||
|
||||
/* Get/set flags for target power switch */
|
||||
// Get/set flags for target power switch
|
||||
bool vtarg_switch_get;
|
||||
bool vtarg_switch_set;
|
||||
unsigned char vtarg_switch_data[2];
|
||||
|
||||
/* Get/set flags for adjustable target voltage */
|
||||
// Get/set flags for adjustable target voltage
|
||||
bool vtarg_get;
|
||||
bool vtarg_set;
|
||||
double vtarg_data;
|
||||
|
||||
/* Get/set flags for adjustable analog reference voltage */
|
||||
// Get/set flags for adjustable analog reference voltage
|
||||
bool varef_get;
|
||||
bool varef_set;
|
||||
int varef_channel;
|
||||
double varef_data;
|
||||
|
||||
/* Get/set flags for programmable clock generator */
|
||||
// Get/set flags for programmable clock generator
|
||||
bool fosc_get;
|
||||
bool fosc_set;
|
||||
double fosc_data;
|
||||
|
||||
/* Set STK500 XTAL frequency */
|
||||
// Set STK500 XTAL frequency
|
||||
unsigned xtal;
|
||||
|
||||
/* Flag for PICkit4/SNAP mode switching */
|
||||
// Flag for PICkit4/SNAP mode switching
|
||||
int pk4_snap_mode;
|
||||
|
||||
const AVRPART *lastpart;
|
||||
|
||||
/* Start address of Xmega boot area */
|
||||
// Start address of Xmega boot area
|
||||
unsigned long boot_start;
|
||||
|
||||
/*
|
||||
* Chained pdata for the JTAG ICE mkII backend. This is used when
|
||||
* calling the backend functions for ISP/HVSP/PP programming
|
||||
* functionality of the JTAG ICE mkII and AVR Dragon.
|
||||
* Chained pdata for the JTAG ICE mkII backend. This is used when calling
|
||||
* the backend functions for ISP/HVSP/PP programming functionality of the
|
||||
* JTAG ICE mkII and AVR Dragon.
|
||||
*/
|
||||
void *chained_pdata;
|
||||
};
|
||||
|
||||
|
||||
Reference in New Issue
Block a user