Mirrors/avrdude
1
0
Fork 0
mirror of https://github.com/avrdudes/avrdude.git synced 2026-09-22 09:06:23 +03:00
Code Issues Packages Projects Releases Wiki Activity

Update avrdude.texi

Browse Source
This commit is contained in:
MCUdude
2023-04-23 11:56:22 +02:00
parent 7c4d5fa9d1
commit cb96dc39b6
1 changed files with 56 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

62
src/doc/avrdude.texi
View File

@@ -937,14 +937,19 @@ after, @var{BB} bits before, and @var{BA} bits after the target AVR,
respectively.
Each AVR unit within the chain shifts by 4 bits.
Other JTAG units might require a different bit shift count.
@end table
The PICkit 4 and the Power Debugger also supports high-voltage UPDI programming.
This is used to enable a UPDI pin that has previously been set to RESET or
GPIO mode. High-voltage UPDI can be utilized by using an extended parameter:
@table @code
@item @samp{hvupdi}
Enable high-voltage UPDI initialization for targets that supports this.
@var{Power Debugger and Pickit 4 only}
@*
High-voltage UPDI programming is used to enable a UPDI pin that has previously
been set to RESET or GPIO mode. Use @samp{-xhvupdi} to enable high-voltage UPDI
initialization for supported targets.
@item @samp{vtarg=VALUE, vtarg}
@var{Power Debugger only}
@*
The voltage generator can be enabled by setting a target voltage.
The current set-voltage can be read by @samp{-xvtarg} alone.
@item @samp{help}
Show help menu and exit.
@@ -985,6 +990,51 @@ Also note that the smaller Xplained Nano boards does not have a target power swi
Show help menu and exit.
@end table
@cindex @code{-x} Curiosity Nano
@item Curiosity Nano
The Curiosity Nano board accepts the following extended parameter:
@table @code
@item @samp{vtarg=VALUE, vtarg}
The generated on-board target voltage can be changed by specifying a new voltage.
The current set-voltage can be read by @samp{-xvtarg} alone.
@item @samp{help}
Show help menu and exit.
@end table
@cindex @code{-x} STK500
@cindex @code{-x} STK600
@item STK500
@item STK600
The STK500 and STK600 boards accepts the following extended parameters:
@table @code
@item @samp{vtarg=VALUE, vtarg}
The generated on-board target voltage can be changed by specifying a new voltage.
The current set-voltage can be read by @samp{-xvtarg} alone.
@item @samp{fosc=VALUE[MHz|M|kHz|k|Hz], fosc}
Set the programmable oscillator frequency in MHz, kHz or Hz.
The current frequency can be read by @samp{-xfosc} alone.
@item @samp{varef=VALUE, varef}
The generated on-board analog reference voltage can be changed by specifying
a new reference voltage. The current reference voltage can be read by
@samp{-xvaref} alone.
@item @samp{varef[0,1]=VALUE, varef[0,1]}
@var{STK600 only}
@*
The generated on-board analog reference voltage for channel 0 or channel 1 can
be changed by specifying a new reference voltage.
The current reference voltage can be read by @samp{-xvaref0} or
@samp{-xvaref1} alone.
@item @samp{attemps[=<1..99>]}
@var{STK500V1 only}
@*
Specify how many connection retry attemps to perform before exiting.
Defaults to 10 if not specified.
@item @samp{help}
Show help menu and exit.
@end table
@cindex @code{-x} AVR910
@item AVR910