rv1126: tpl: update thunder boot ddr bin to v1.06

build from next-dev:
        b1b9d7fba4 drivers: ram: common: fix ssmod define err
update feature:
        b1b9d7fba4 drivers: ram: common: fix ssmod define err
        d49e7c3403 drivers: ram: rv1126: fix the judgment of "set ctl address map fail"
        06a17b4adf drivers: ram: rv1126: Turn on DQS_c 2k pull-up resistor to workaround WDQS control of LPDDR4/LPDDR4X
        246ad23dbf drivers: ram: rk356x: fix read_mr() of LPDDR3
        e90784abb2 rv1126: ddr: fix tx dqs bypass phase setting err
        c2a03d5d81 drivers: ram: rv1126: add support lpddr4x
        bf922fc800 drivers: ram: rv1126: fix calculating of MSCH_DeviceSize
        e2dc1cc022 drivers: ram: rv1126: Modify tRFC and related timing based on DDR capacity
        330cd12fc3 drivers: ram: rv1126: fix return value of read_mr()
        3993b0c711 drivers: ram: rv1126: Set default value of die bus with to x16 when bus width is x16/x32 of DDR3
        9050e1f82e drivers: ram: rv1126: fix tZQLAT of LPDDR4
build command:
        CONFIG_SPL_KERNEL_BOOT=y
for lpddr3 bin, CONFIG_ROCKCHIP_TPL_INIT_DRAM_TYPE need set to 6.
for lpddr4 bin, CONFIG_ROCKCHIP_TPL_INIT_DRAM_TYPE need set to 7.
default CONFIG_ROCKCHIP_DRAM_EXTENDED_TEMP_SUPPORT=n, if you need
extended temperature bin, you need enable "CONFIG_ROCKCHIP_DRAM\
_EXTENDED_TEMP_SUPPORT", then rebuild uboot.
    ./make.sh rv1126 && ./make.sh tpl.
Note:
        the pre-build 528MHz binary disable ODT.

Change-Id: Ibb384f60d714535822202330d2c3ae3cef75337c
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>

RKBOOT/RV1126MINIALL_EMMC_TB.ini

@@ -5,7 +5,7 @@ MAJOR=1
 MINOR=4
 [CODE471_OPTION]
 NUM=1
-Path1=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.04.bin
+Path1=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.06.bin
 Sleep=1
 [CODE472_OPTION]
 NUM=1
@@ -14,7 +14,7 @@ Path1=bin/rv11/rv1126_usbplug_v1.18.bin
 NUM=2
 LOADER1=FlashData
 LOADER2=FlashBoot
-FlashData=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.04.bin
+FlashData=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.06.bin
 FlashBoot=bin/rv11/rv1126_spl_emmc_tb_v1.12.bin
 [OUTPUT]
-PATH=rv1126_spl_loader_v1.04.112.bin
+PATH=rv1126_spl_loader_v1.06.112.bin

RKBOOT/RV1126MINIALL_LP3_EMMC_TB.ini

@@ -5,7 +5,7 @@ MAJOR=1
 MINOR=4
 [CODE471_OPTION]
 NUM=1
-Path1=bin/rv11/rv1126_tpl_528MHz_lp3_tb_bat_v1.04.bin
+Path1=bin/rv11/rv1126_tpl_528MHz_lp3_tb_v1.06.bin
 Sleep=1
 [CODE472_OPTION]
 NUM=1
@@ -14,7 +14,7 @@ Path1=bin/rv11/rv1126_usbplug_v1.18.bin
 NUM=2
 LOADER1=FlashData
 LOADER2=FlashBoot
-FlashData=bin/rv11/rv1126_tpl_528MHz_lp3_tb_bat_v1.04.bin
+FlashData=bin/rv11/rv1126_tpl_528MHz_lp3_tb_v1.06.bin
 FlashBoot=bin/rv11/rv1126_spl_emmc_tb_v1.12.bin
 [OUTPUT]
-PATH=rv1126_spl_loader_v1.04.112.bin
+PATH=rv1126_spl_loader_v1.06.112.bin

RKBOOT/RV1126MINIALL_LP4_EMMC_TB.ini

@@ -0,0 +1,20 @@
+[CHIP_NAME]
+NAME=RV1126
+[VERSION]
+MAJOR=1
+MINOR=4
+[CODE471_OPTION]
+NUM=1
+Path1=bin/rv11/rv1126_tpl_528MHz_lp4_tb_v1.06.bin
+Sleep=1
+[CODE472_OPTION]
+NUM=1
+Path1=bin/rv11/rv1126_usbplug_v1.18.bin
+[LOADER_OPTION]
+NUM=2
+LOADER1=FlashData
+LOADER2=FlashBoot
+FlashData=bin/rv11/rv1126_tpl_528MHz_lp4_tb_v1.06.bin
+FlashBoot=bin/rv11/rv1126_spl_emmc_tb_v1.12.bin
+[OUTPUT]
+PATH=rv1126_spl_loader_v1.06.112.bin

RKBOOT/RV1126MINIALL_SPI_NOR_TB.ini

@@ -5,7 +5,7 @@ MAJOR=1
 MINOR=4
 [CODE471_OPTION]
 NUM=1
-Path1=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.04.bin
+Path1=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.06.bin
 Sleep=1
 [CODE472_OPTION]
 NUM=1
@@ -14,7 +14,7 @@ Path1=bin/rv11/rv1126_usbplug_v1.18.bin
 NUM=2
 LOADER1=FlashData
 LOADER2=FlashBoot
-FlashData=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.04.bin
+FlashData=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.06.bin
 FlashBoot=bin/rv11/rv1126_spl_spi_nor_tb_v1.00.bin
 [OUTPUT]
-PATH=rv1126_spl_loader_v1.04.113.bin
+PATH=rv1126_spl_loader_v1.06.113.bin