rv1126: tpl: update thunder boot ddr bin to v1.08

build from next-dev:
        9080840a12 drivers: ram: rv1126: Detect byte map of x16 DDR3/DDR4
update feature:
        9080840a12 drivers: ram: rv1126: Detect byte map of x16 DDR3/DDR4
build command:
        CONFIG_SPL_KERNEL_BOOT=y
for lpddr3 bin, CONFIG_ROCKCHIP_TPL_INIT_DRAM_TYPE need set to 6.
for lpddr4 bin, CONFIG_ROCKCHIP_TPL_INIT_DRAM_TYPE need set to 7.
default CONFIG_ROCKCHIP_DRAM_EXTENDED_TEMP_SUPPORT=n, if you need
extended temperature bin, you need enable "CONFIG_ROCKCHIP_DRAM\
_EXTENDED_TEMP_SUPPORT", then rebuild uboot.
    ./make.sh rv1126 && ./make.sh tpl.
Note:
        the pre-build 528MHz binary disable ODT.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Change-Id: If0e8207e9e4b9e36850dbc7fb6aabebfc8a32bd8

RKBOOT/RV1126MINIALL_EMMC_TB.ini

@@ -5,7 +5,7 @@ MAJOR=1
 MINOR=4
 [CODE471_OPTION]
 NUM=1
-Path1=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.06.bin
+Path1=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.08.bin
 Sleep=1
 [CODE472_OPTION]
 NUM=1
@@ -14,7 +14,7 @@ Path1=bin/rv11/rv1126_usbplug_v1.20.bin
 NUM=2
 LOADER1=FlashData
 LOADER2=FlashBoot
-FlashData=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.06.bin
+FlashData=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.08.bin
 FlashBoot=bin/rv11/rv1126_spl_emmc_tb_v1.12.bin
 [OUTPUT]
-PATH=rv1126_spl_loader_v1.06.112.bin
+PATH=rv1126_spl_loader_v1.08.112.bin

RKBOOT/RV1126MINIALL_LP3_EMMC_TB.ini

@@ -5,7 +5,7 @@ MAJOR=1
 MINOR=4
 [CODE471_OPTION]
 NUM=1
-Path1=bin/rv11/rv1126_tpl_528MHz_lp3_tb_v1.06.bin
+Path1=bin/rv11/rv1126_tpl_528MHz_lp3_tb_v1.08.bin
 Sleep=1
 [CODE472_OPTION]
 NUM=1
@@ -14,7 +14,7 @@ Path1=bin/rv11/rv1126_usbplug_v1.20.bin
 NUM=2
 LOADER1=FlashData
 LOADER2=FlashBoot
-FlashData=bin/rv11/rv1126_tpl_528MHz_lp3_tb_v1.06.bin
+FlashData=bin/rv11/rv1126_tpl_528MHz_lp3_tb_v1.08.bin
 FlashBoot=bin/rv11/rv1126_spl_emmc_tb_v1.12.bin
 [OUTPUT]
-PATH=rv1126_spl_loader_v1.06.112.bin
+PATH=rv1126_spl_loader_v1.08.112.bin

RKBOOT/RV1126MINIALL_LP4_EMMC_TB.ini

@@ -5,7 +5,7 @@ MAJOR=1
 MINOR=4
 [CODE471_OPTION]
 NUM=1
-Path1=bin/rv11/rv1126_tpl_528MHz_lp4_tb_v1.06.bin
+Path1=bin/rv11/rv1126_tpl_528MHz_lp4_tb_v1.08.bin
 Sleep=1
 [CODE472_OPTION]
 NUM=1
@@ -14,7 +14,7 @@ Path1=bin/rv11/rv1126_usbplug_v1.20.bin
 NUM=2
 LOADER1=FlashData
 LOADER2=FlashBoot
-FlashData=bin/rv11/rv1126_tpl_528MHz_lp4_tb_v1.06.bin
+FlashData=bin/rv11/rv1126_tpl_528MHz_lp4_tb_v1.08.bin
 FlashBoot=bin/rv11/rv1126_spl_emmc_tb_v1.12.bin
 [OUTPUT]
-PATH=rv1126_spl_loader_v1.06.112.bin
+PATH=rv1126_spl_loader_v1.08.112.bin

RKBOOT/RV1126MINIALL_SPI_NOR_TB.ini

@@ -5,7 +5,7 @@ MAJOR=1
 MINOR=4
 [CODE471_OPTION]
 NUM=1
-Path1=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.06.bin
+Path1=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.08.bin
 Sleep=1
 [CODE472_OPTION]
 NUM=1
@@ -14,7 +14,7 @@ Path1=bin/rv11/rv1126_usbplug_v1.20.bin
 NUM=2
 LOADER1=FlashData
 LOADER2=FlashBoot
-FlashData=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.06.bin
+FlashData=bin/rv11/rv1126_tpl_924MHz_ddr3_tb_v1.08.bin
 FlashBoot=bin/rv11/rv1126_spl_spi_nor_tb_v1.00.bin
 [OUTPUT]
-PATH=rv1126_spl_loader_v1.06.113.bin
+PATH=rv1126_spl_loader_v1.08.100.bin