Merge tag 'u-boot-ufs-20260304' of https://source.denx.de/u-boot/custodians/u-boot-ufs

A few fixes/missing changes for UFS:
- remove unused ufs_post_bind() declaration
- Disable UTP command timeout in slow mode
- Missing MediaTek UFS PHY Driver to be used with the UFS driver

drivers/phy/Kconfig

@@ -282,6 +282,16 @@ config PHY_MTK_TPHY
 	  multi-ports is first version, otherwise is second veriosn,
 	  so you can easily distinguish them by banks layout.
 
+config PHY_MTK_UFS
+	tristate "MediaTek UFS M-PHY driver"
+	depends on ARCH_MEDIATEK
+	depends on PHY
+	help
+	  Support for UFS M-PHY on MediaTek chipsets.
+	  Enable this to provide vendor-specific probing,
+	  initialization, power on and power off flow of
+	  specified M-PHYs.
+
 config PHY_NPCM_USB
 	bool "Nuvoton NPCM USB PHY support"
 	depends on PHY

drivers/phy/Makefile

@@ -37,6 +37,7 @@ obj-$(CONFIG_MT76X8_USB_PHY) += mt76x8-usb-phy.o
 obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
 obj-$(CONFIG_PHY_EXYNOS_USBDRD) += phy-exynos-usbdrd.o
 obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
+obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o
 obj-$(CONFIG_PHY_NPCM_USB) += phy-npcm-usb.o
 obj-$(CONFIG_$(PHASE_)PHY_IMX8MQ_USB) += phy-imx8mq-usb.o
 obj-$(CONFIG_PHY_IMX8M_PCIE) += phy-imx8m-pcie.o

drivers/phy/phy-mtk-ufs.c

@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Stanley Chu <stanley.chu@mediatek.com>
+ *
+ * Copyright (c) 2025, Igor Belwon <igor.belwon@mentallysanemainliners.org>
+ */
+
+#include "dm/ofnode.h"
+#include "dm/read.h"
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <malloc.h>
+#include <mapmem.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <dm/device_compat.h>
+#include <dm/devres.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+#include <dt-bindings/phy/phy.h>
+
+/* mphy register and offsets */
+#define MP_GLB_DIG_8C               0x008C
+#define FRC_PLL_ISO_EN              BIT(8)
+#define PLL_ISO_EN                  BIT(9)
+#define FRC_FRC_PWR_ON              BIT(10)
+#define PLL_PWR_ON                  BIT(11)
+
+#define MP_LN_DIG_RX_9C             0xA09C
+#define FSM_DIFZ_FRC                BIT(18)
+
+#define MP_LN_DIG_RX_AC             0xA0AC
+#define FRC_RX_SQ_EN                BIT(0)
+#define RX_SQ_EN                    BIT(1)
+
+#define MP_LN_RX_44                 0xB044
+#define FRC_CDR_PWR_ON              BIT(17)
+#define CDR_PWR_ON                  BIT(18)
+#define FRC_CDR_ISO_EN              BIT(19)
+#define CDR_ISO_EN                  BIT(20)
+
+#define UFSPHY_CLKS_CNT    2
+
+struct mtk_ufs_phy {
+	struct udevice *dev;
+	void __iomem *mmio;
+
+	struct clk *unipro_clk;
+	struct clk *mp_clk;
+};
+
+static void ufs_mtk_phy_set_active(struct mtk_ufs_phy *phy)
+{
+	/* release DA_MP_PLL_PWR_ON */
+	setbits_le32(phy->mmio + MP_GLB_DIG_8C, PLL_PWR_ON);
+	clrbits_le32(phy->mmio + MP_GLB_DIG_8C, FRC_FRC_PWR_ON);
+
+	/* release DA_MP_PLL_ISO_EN */
+	clrbits_le32(phy->mmio + MP_GLB_DIG_8C, PLL_ISO_EN);
+	clrbits_le32(phy->mmio + MP_GLB_DIG_8C, FRC_PLL_ISO_EN);
+
+	/* release DA_MP_CDR_PWR_ON */
+	setbits_le32(phy->mmio + MP_LN_RX_44, CDR_PWR_ON);
+	clrbits_le32(phy->mmio + MP_LN_RX_44, FRC_CDR_PWR_ON);
+
+	/* release DA_MP_CDR_ISO_EN */
+	clrbits_le32(phy->mmio + MP_LN_RX_44, CDR_ISO_EN);
+	clrbits_le32(phy->mmio + MP_LN_RX_44, FRC_CDR_ISO_EN);
+
+	/* release DA_MP_RX0_SQ_EN */
+	setbits_le32(phy->mmio + MP_LN_DIG_RX_AC, RX_SQ_EN);
+	clrbits_le32(phy->mmio + MP_LN_DIG_RX_AC, FRC_RX_SQ_EN);
+
+	/* delay 1us to wait DIFZ stable */
+	udelay(1);
+
+	/* release DIFZ */
+	clrbits_le32(phy->mmio + MP_LN_DIG_RX_9C, FSM_DIFZ_FRC);
+}
+
+static int mtk_phy_power_on(struct phy *phy)
+{
+	struct mtk_ufs_phy *ufs_phy = dev_get_priv(phy->dev);
+	int ret;
+
+	ret = clk_enable(ufs_phy->mp_clk);
+	if (ret < 0) {
+		dev_err(phy->dev, "failed to enable mp_clk\n");
+		return ret;
+	}
+
+	ret = clk_enable(ufs_phy->unipro_clk);
+	if (ret < 0) {
+		dev_err(phy->dev, "failed to enable unipro_clk %d\n", ret);
+		clk_disable(ufs_phy->unipro_clk);
+		return ret;
+	}
+
+	ufs_mtk_phy_set_active(ufs_phy);
+
+	return 0;
+}
+
+static int mtk_phy_power_off(struct phy *phy)
+{
+	struct mtk_ufs_phy *ufs_phy = dev_get_priv(phy->dev);
+
+	/* Set PHY to Deep Hibernate mode */
+	setbits_le32(ufs_phy->mmio + MP_LN_DIG_RX_9C, FSM_DIFZ_FRC);
+
+	/* force DA_MP_RX0_SQ_EN */
+	setbits_le32(ufs_phy->mmio + MP_LN_DIG_RX_AC, FRC_RX_SQ_EN);
+	clrbits_le32(ufs_phy->mmio + MP_LN_DIG_RX_AC, RX_SQ_EN);
+
+	/* force DA_MP_CDR_ISO_EN */
+	setbits_le32(ufs_phy->mmio + MP_LN_RX_44, FRC_CDR_ISO_EN);
+	setbits_le32(ufs_phy->mmio + MP_LN_RX_44, CDR_ISO_EN);
+
+	/* force DA_MP_CDR_PWR_ON */
+	setbits_le32(ufs_phy->mmio + MP_LN_RX_44, FRC_CDR_PWR_ON);
+	clrbits_le32(ufs_phy->mmio + MP_LN_RX_44, CDR_PWR_ON);
+
+	/* force DA_MP_PLL_ISO_EN */
+	setbits_le32(ufs_phy->mmio + MP_GLB_DIG_8C, FRC_PLL_ISO_EN);
+	setbits_le32(ufs_phy->mmio + MP_GLB_DIG_8C, PLL_ISO_EN);
+
+	/* force DA_MP_PLL_PWR_ON */
+	setbits_le32(ufs_phy->mmio + MP_GLB_DIG_8C, FRC_FRC_PWR_ON);
+	clrbits_le32(ufs_phy->mmio + MP_GLB_DIG_8C, PLL_PWR_ON);
+
+	return 0;
+}
+
+static const struct phy_ops mtk_ufs_phy_ops = {
+	.power_on	= mtk_phy_power_on,
+	.power_off	= mtk_phy_power_off,
+};
+
+static int mtk_ufs_phy_probe(struct udevice *dev)
+{
+	struct mtk_ufs_phy *phy = dev_get_priv(dev);
+	fdt_addr_t addr;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	addr = dev_read_addr(dev);
+	if (addr == FDT_ADDR_T_NONE)
+		return -ENOMEM;
+
+	phy->dev = dev;
+	phy->mmio = map_sysmem(addr, 0);
+
+	phy->mp_clk = devm_clk_get(dev, "mp");
+	if (IS_ERR(phy->mp_clk)) {
+		ret = PTR_ERR(phy->mp_clk);
+		dev_err(dev, "Failed to get mp clock (ret=%d)\n", ret);
+		return ret;
+	}
+
+	phy->unipro_clk = devm_clk_get(dev, "unipro");
+	if (IS_ERR(phy->unipro_clk)) {
+		ret = PTR_ERR(phy->unipro_clk);
+		dev_err(dev, "Failed to get unipro clock (ret=%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct udevice_id mtk_ufs_phy_id_table[] = {
+	{.compatible = "mediatek,mt8183-ufsphy"},
+	{},
+};
+
+U_BOOT_DRIVER(mtk_ufs_phy) = {
+	.name		= "mtk-ufs_phy",
+	.id		= UCLASS_PHY,
+	.of_match	= mtk_ufs_phy_id_table,
+	.ops		= &mtk_ufs_phy_ops,
+	.probe		= mtk_ufs_phy_probe,
+	.priv_auto	= sizeof(struct mtk_ufs_phy),
+};

drivers/ufs/cdns-platform.c

@@ -7,7 +7,6 @@
 
 #include <clk.h>
 #include <dm.h>
-#include <ufs.h>
 #include <asm/io.h>
 #include <dm/device_compat.h>
 #include <linux/bitops.h>

drivers/ufs/ufs-amd-versal2.c

@@ -5,7 +5,6 @@
 
 #include <clk.h>
 #include <dm.h>
-#include <ufs.h>
 #include <asm/io.h>
 #include <dm/device_compat.h>
 #include <zynqmp_firmware.h>

drivers/ufs/ufs-pci.c

@@ -7,7 +7,6 @@
 #include <dm.h>
 #include <errno.h>
 #include <pci.h>
-#include <ufs.h>
 #include <dm/device_compat.h>
 #include "ufs.h"
 

drivers/ufs/ufs-qcom.c

@@ -14,7 +14,6 @@
 #include <dm.h>
 #include <dm/device_compat.h>
 #include <generic-phy.h>
-#include <ufs.h>
 #include <asm/gpio.h>
 #include <interconnect.h>
 

drivers/ufs/ufs-renesas-rcar-gen5.c

@@ -7,7 +7,6 @@
 
 #include <clk.h>
 #include <dm.h>
-#include <ufs.h>
 #include <asm/io.h>
 #include <dm/device_compat.h>
 #include <linux/iopoll.h>

drivers/ufs/ufs-renesas.c

@@ -7,7 +7,6 @@
 
 #include <clk.h>
 #include <dm.h>
-#include <ufs.h>
 #include <asm/io.h>
 #include <dm/device_compat.h>
 #include <linux/bitops.h>

drivers/ufs/ufs-rockchip.c

@@ -13,7 +13,6 @@
 #include <linux/err.h>
 #include <linux/ioport.h>
 #include <reset.h>
-#include <ufs.h>
 
 #include "ufs.h"
 #include "unipro.h"

drivers/ufs/ufs-uclass.c

@@ -917,11 +917,13 @@ static int ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag)
 		enabled_intr_status = intr_status & hba->intr_mask;
 		ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS);
 
-		if (get_timer(start) > QUERY_REQ_TIMEOUT) {
-			dev_err(hba->dev,
-				"Timedout waiting for UTP response\n");
-
-			return -ETIMEDOUT;
+		if (hba->max_pwr_info.info.pwr_rx != SLOWAUTO_MODE &&
+		    hba->max_pwr_info.info.pwr_tx != SLOWAUTO_MODE) {
+			if (get_timer(start) > QUERY_REQ_TIMEOUT) {
+				dev_err(hba->dev,
+					"Timedout waiting for UTP response\n");
+				return -ETIMEDOUT;
+			}
 		}
 
 		if (enabled_intr_status & UFSHCD_ERROR_MASK) {

drivers/ufs/ufshcd-dwc.c

@@ -7,7 +7,6 @@
  */
 #include <clk.h>
 #include <dm.h>
-#include <ufs.h>
 #include <asm/io.h>
 #include <dm/device_compat.h>
 #include <linux/bitops.h>

include/ufs.h

@@ -20,13 +20,4 @@ int ufs_probe(void);
  */
 int ufs_probe_dev(int index);
 
-/*
- * ufs_scsi_bind() - Create a new scsi device as a child of the UFS device and
- *		     bind it to the ufs_scsi driver
- * @ufs_dev: UFS device
- * @scsi_devp: Pointer to scsi device
- *
- * Return: 0 if Ok, -ve on error
- */
-int ufs_scsi_bind(struct udevice *ufs_dev, struct udevice **scsi_devp);
 #endif