Mirrors/u-boot
1
0
Fork 0
mirror of https://source.denx.de/u-boot/u-boot.git synced 2026-06-13 15:03:58 +03:00
Code Issues Packages Projects Releases Wiki Activity

net: ti: icssg: Add Firmware config and classification APIs.

Browse Source 
Add icssg_config.h / .c and icssg_classifier.c files. These are firmware
configuration and classification related files. Add MII helper APIs and
MACROs. These APIs and MACROs will be later used by ICSSG Ethernet driver.
Also introduce icssg_prueth.h which has definition of prueth related
structures.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
This commit is contained in:
MD Danish Anwar
2024-04-04 12:38:00 +05:30
committed by Tom Rini
parent 8cb5f079ac
commit 1c05cb469f
5 changed files with 1234 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

192
drivers/net/ti/icss_mii_rt.h Normal file
View File

@@ -0,0 +1,192 @@
/* SPDX-License-Identifier: GPL-2.0 */
/* PRU-ICSS MII_RT register definitions
*
* Copyright (C) 2015-2024 Texas Instruments Incorporated - https://www.ti.com
*/
#ifndef __NET_PRUSS_MII_RT_H__
#define __NET_PRUSS_MII_RT_H__
#include <regmap.h>
/* PRUSS_MII_RT Registers */
#define PRUSS_MII_RT_RXCFG0 0x0
#define PRUSS_MII_RT_RXCFG1 0x4
#define PRUSS_MII_RT_TXCFG0 0x10
#define PRUSS_MII_RT_TXCFG1 0x14
#define PRUSS_MII_RT_TX_CRC0 0x20
#define PRUSS_MII_RT_TX_CRC1 0x24
#define PRUSS_MII_RT_TX_IPG0 0x30
#define PRUSS_MII_RT_TX_IPG1 0x34
#define PRUSS_MII_RT_PRS0 0x38
#define PRUSS_MII_RT_PRS1 0x3c
#define PRUSS_MII_RT_RX_FRMS0 0x40
#define PRUSS_MII_RT_RX_FRMS1 0x44
#define PRUSS_MII_RT_RX_PCNT0 0x48
#define PRUSS_MII_RT_RX_PCNT1 0x4c
#define PRUSS_MII_RT_RX_ERR0 0x50
#define PRUSS_MII_RT_RX_ERR1 0x54
/* PRUSS_MII_RT_RXCFG0/1 bits */
#define PRUSS_MII_RT_RXCFG_RX_ENABLE BIT(0)
#define PRUSS_MII_RT_RXCFG_RX_DATA_RDY_MODE_DIS BIT(1)
#define PRUSS_MII_RT_RXCFG_RX_CUT_PREAMBLE BIT(2)
#define PRUSS_MII_RT_RXCFG_RX_MUX_SEL BIT(3)
#define PRUSS_MII_RT_RXCFG_RX_L2_EN BIT(4)
#define PRUSS_MII_RT_RXCFG_RX_BYTE_SWAP BIT(5)
#define PRUSS_MII_RT_RXCFG_RX_AUTO_FWD_PRE BIT(6)
#define PRUSS_MII_RT_RXCFG_RX_L2_EOF_SCLR_DIS BIT(9)
/* PRUSS_MII_RT_TXCFG0/1 bits */
#define PRUSS_MII_RT_TXCFG_TX_ENABLE BIT(0)
#define PRUSS_MII_RT_TXCFG_TX_AUTO_PREAMBLE BIT(1)
#define PRUSS_MII_RT_TXCFG_TX_EN_MODE BIT(2)
#define PRUSS_MII_RT_TXCFG_TX_BYTE_SWAP BIT(3)
#define PRUSS_MII_RT_TXCFG_TX_MUX_SEL BIT(8)
#define PRUSS_MII_RT_TXCFG_PRE_TX_AUTO_SEQUENCE BIT(9)
#define PRUSS_MII_RT_TXCFG_PRE_TX_AUTO_ESC_ERR BIT(10)
#define PRUSS_MII_RT_TXCFG_TX_32_MODE_EN BIT(11)
#define PRUSS_MII_RT_TXCFG_TX_IPG_WIRE_CLK_EN BIT(12) /* SR2.0 onwards */
#define PRUSS_MII_RT_TXCFG_TX_START_DELAY_SHIFT 16
#define PRUSS_MII_RT_TXCFG_TX_START_DELAY_MASK GENMASK(25, 16)
#define PRUSS_MII_RT_TXCFG_TX_CLK_DELAY_SHIFT 28
#define PRUSS_MII_RT_TXCFG_TX_CLK_DELAY_MASK GENMASK(30, 28)
/* PRUSS_MII_RT_TX_IPG0/1 bits */
#define PRUSS_MII_RT_TX_IPG_IPG_SHIFT 0
#define PRUSS_MII_RT_TX_IPG_IPG_MASK GENMASK(9, 0)
/* PRUSS_MII_RT_PRS0/1 bits */
#define PRUSS_MII_RT_PRS_COL BIT(0)
#define PRUSS_MII_RT_PRS_CRS BIT(1)
/* PRUSS_MII_RT_RX_FRMS0/1 bits */
#define PRUSS_MII_RT_RX_FRMS_MIN_FRM_SHIFT 0
#define PRUSS_MII_RT_RX_FRMS_MIN_FRM_MASK GENMASK(15, 0)
#define PRUSS_MII_RT_RX_FRMS_MAX_FRM_SHIFT 16
#define PRUSS_MII_RT_RX_FRMS_MAX_FRM_MASK GENMASK(31, 16)
/* Min/Max in MII_RT_RX_FRMS */
/* For EMAC and Switch */
#define PRUSS_MII_RT_RX_FRMS_MAX (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
#define PRUSS_MII_RT_RX_FRMS_MIN_FRM (64)
/* for HSR and PRP */
#define PRUSS_MII_RT_RX_FRMS_MAX_FRM_LRE (PRUSS_MII_RT_RX_FRMS_MAX + \
ICSS_LRE_TAG_RCT_SIZE)
/* PRUSS_MII_RT_RX_PCNT0/1 bits */
#define PRUSS_MII_RT_RX_PCNT_MIN_PCNT_SHIFT 0
#define PRUSS_MII_RT_RX_PCNT_MIN_PCNT_MASK GENMASK(3, 0)
#define PRUSS_MII_RT_RX_PCNT_MAX_PCNT_SHIFT 4
#define PRUSS_MII_RT_RX_PCNT_MAX_PCNT_MASK GENMASK(7, 4)
/* PRUSS_MII_RT_RX_ERR0/1 bits */
#define PRUSS_MII_RT_RX_ERR_MIN_PCNT_ERR BIT(0)
#define PRUSS_MII_RT_RX_ERR_MAX_PCNT_ERR BIT(1)
#define PRUSS_MII_RT_RX_ERR_MIN_FRM_ERR BIT(2)
#define PRUSS_MII_RT_RX_ERR_MAX_FRM_ERR BIT(3)
#define ICSSG_CFG_OFFSET 0
#define RGMII_CFG_OFFSET 4
/* Constant to choose between MII0 and MII1 */
#define ICSS_MII0 0
#define ICSS_MII1 1
/* ICSSG_CFG Register bits */
#define ICSSG_CFG_SGMII_MODE BIT(16)
#define ICSSG_CFG_TX_PRU_EN BIT(11)
#define ICSSG_CFG_RX_SFD_TX_SOF_EN BIT(10)
#define ICSSG_CFG_RTU_PRU_PSI_SHARE_EN BIT(9)
#define ICSSG_CFG_IEP1_TX_EN BIT(8)
#define ICSSG_CFG_MII1_MODE GENMASK(6, 5)
#define ICSSG_CFG_MII1_MODE_SHIFT 5
#define ICSSG_CFG_MII0_MODE GENMASK(4, 3)
#define ICSSG_CFG_MII0_MODE_SHIFT 3
#define ICSSG_CFG_RX_L2_G_EN BIT(2)
#define ICSSG_CFG_TX_L2_EN BIT(1)
#define ICSSG_CFG_TX_L1_EN BIT(0)
enum mii_mode { MII_MODE_MII = 0, MII_MODE_RGMII, MII_MODE_SGMII };
/* RGMII CFG Register bits */
#define RGMII_CFG_INBAND_EN_MII0 BIT(16)
#define RGMII_CFG_GIG_EN_MII0 BIT(17)
#define RGMII_CFG_INBAND_EN_MII1 BIT(20)
#define RGMII_CFG_GIG_EN_MII1 BIT(21)
#define RGMII_CFG_FULL_DUPLEX_MII0 BIT(18)
#define RGMII_CFG_FULL_DUPLEX_MII1 BIT(22)
#define RGMII_CFG_SPEED_MII0 GENMASK(2, 1)
#define RGMII_CFG_SPEED_MII1 GENMASK(6, 5)
#define RGMII_CFG_SPEED_MII0_SHIFT 1
#define RGMII_CFG_SPEED_MII1_SHIFT 5
#define RGMII_CFG_FULLDUPLEX_MII0 BIT(3)
#define RGMII_CFG_FULLDUPLEX_MII1 BIT(7)
#define RGMII_CFG_FULLDUPLEX_MII0_SHIFT 3
#define RGMII_CFG_FULLDUPLEX_MII1_SHIFT 7
#define RGMII_CFG_SPEED_10M 0
#define RGMII_CFG_SPEED_100M 1
#define RGMII_CFG_SPEED_1G 2
static inline void icssg_mii_update_ipg(struct regmap *mii_rt, int mii, u32 ipg)
{
u32 val;
if (mii == ICSS_MII0) {
regmap_write(mii_rt, PRUSS_MII_RT_TX_IPG0, ipg);
} else {
/* Errata workaround: IEP1 is not read by h/w unless IEP0 is written */
regmap_read(mii_rt, PRUSS_MII_RT_TX_IPG0, &val);
regmap_write(mii_rt, PRUSS_MII_RT_TX_IPG1, ipg);
regmap_write(mii_rt, PRUSS_MII_RT_TX_IPG0, val);
}
}
static inline void icssg_update_rgmii_cfg(struct regmap *miig_rt, int speed,
bool full_duplex, int slice, struct prueth_priv *priv)
{
u32 gig_en_mask, gig_val = 0, full_duplex_mask, full_duplex_val = 0;
u32 inband_en_mask, inband_val = 0;
gig_en_mask = (slice == ICSS_MII0) ? RGMII_CFG_GIG_EN_MII0 :
RGMII_CFG_GIG_EN_MII1;
if (speed == SPEED_1000)
gig_val = gig_en_mask;
regmap_update_bits(miig_rt, RGMII_CFG_OFFSET, gig_en_mask, gig_val);
inband_en_mask = (slice == ICSS_MII0) ? RGMII_CFG_INBAND_EN_MII0 :
RGMII_CFG_INBAND_EN_MII1;
if (speed == SPEED_10 && phy_interface_is_rgmii(priv->phydev))
inband_val = inband_en_mask;
regmap_update_bits(miig_rt, RGMII_CFG_OFFSET, inband_en_mask, inband_val);
full_duplex_mask = (slice == ICSS_MII0) ? RGMII_CFG_FULL_DUPLEX_MII0 :
RGMII_CFG_FULL_DUPLEX_MII1;
if (full_duplex)
full_duplex_val = full_duplex_mask;
regmap_update_bits(miig_rt, RGMII_CFG_OFFSET, full_duplex_mask,
full_duplex_val);
}
static inline void icssg_miig_set_interface_mode(struct regmap *miig_rt, int mii, int phy_if)
{
u32 val, mask, shift;
mask = mii == ICSS_MII0 ? ICSSG_CFG_MII0_MODE : ICSSG_CFG_MII1_MODE;
shift = mii == ICSS_MII0 ? ICSSG_CFG_MII0_MODE_SHIFT : ICSSG_CFG_MII1_MODE_SHIFT;
val = MII_MODE_RGMII;
if (phy_if == PHY_INTERFACE_MODE_MII)
val = MII_MODE_MII;
val <<= shift;
regmap_update_bits(miig_rt, ICSSG_CFG_OFFSET, mask, val);
regmap_read(miig_rt, ICSSG_CFG_OFFSET, &val);
}
#endif /* __NET_PRUSS_MII_RT_H__ */

376
drivers/net/ti/icssg_classifier.c Normal file
View File

@@ -0,0 +1,376 @@
// SPDX-License-Identifier: GPL-2.0
/* Texas Instruments ICSSG Ethernet Driver
*
* Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
*
*/
#include <dm/ofnode.h>
#include <regmap.h>
#define ICSSG_NUM_CLASSIFIERS 16
#define ICSSG_NUM_FT1_SLOTS 8
#define ICSSG_NUM_FT3_SLOTS 16
#define ICSSG_NUM_CLASSIFIERS_IN_USE 1
/* Filter 1 - FT1 */
#define FT1_NUM_SLOTS 8
#define FT1_SLOT_SIZE 0x10 /* bytes */
/* offsets from FT1 slot base i.e. slot 1 start */
#define FT1_DA0 0x0
#define FT1_DA1 0x4
#define FT1_DA0_MASK 0x8
#define FT1_DA1_MASK 0xc
#define FT1_N_REG(slize, n, reg) (offs[slice].ft1_slot_base + FT1_SLOT_SIZE * (n) + (reg))
#define FT1_LEN_MASK GENMASK(19, 16)
#define FT1_LEN_SHIFT 16
#define FT1_LEN(len) (((len) << FT1_LEN_SHIFT) & FT1_LEN_MASK)
#define FT1_START_MASK GENMASK(14, 0)
#define FT1_START(start) ((start) & FT1_START_MASK)
#define FT1_MATCH_SLOT(n) (GENMASK(23, 16) & (BIT(n) << 16))
enum ft1_cfg_type {
FT1_CFG_TYPE_DISABLED = 0,
FT1_CFG_TYPE_EQ,
FT1_CFG_TYPE_GT,
FT1_CFG_TYPE_LT,
};
#define FT1_CFG_SHIFT(n) (2 * (n))
#define FT1_CFG_MASK(n) (0x3 << FT1_CFG_SHIFT((n)))
/* Filter 3 - FT3 */
#define FT3_NUM_SLOTS 16
#define FT3_SLOT_SIZE 0x20 /* bytes */
/* offsets from FT3 slot n's base */
#define FT3_START 0
#define FT3_START_AUTO 0x4
#define FT3_START_OFFSET 0x8
#define FT3_JUMP_OFFSET 0xc
#define FT3_LEN 0x10
#define FT3_CFG 0x14
#define FT3_T 0x18
#define FT3_T_MASK 0x1c
#define FT3_N_REG(slize, n, reg) \
(offs[slice].ft3_slot_base + FT3_SLOT_SIZE * (n) + (reg))
/* offsets from rx_class n's base */
#define RX_CLASS_AND_EN 0
#define RX_CLASS_OR_EN 0x4
#define RX_CLASS_NUM_SLOTS 16
#define RX_CLASS_EN_SIZE 0x8 /* bytes */
#define RX_CLASS_N_REG(slice, n, reg) \
(offs[slice].rx_class_base + RX_CLASS_EN_SIZE * (n) + (reg))
/* RX Class Gates */
#define RX_CLASS_GATES_SIZE 0x4 /* bytes */
#define RX_CLASS_GATES_N_REG(slice, n) \
(offs[slice].rx_class_gates_base + RX_CLASS_GATES_SIZE * (n))
#define RX_CLASS_GATES_ALLOW_MASK BIT(6)
#define RX_CLASS_GATES_RAW_MASK BIT(5)
#define RX_CLASS_GATES_PHASE_MASK BIT(4)
/* RX Class traffic data matching bits */
#define RX_CLASS_FT_UC BIT(31)
#define RX_CLASS_FT_MC BIT(30)
#define RX_CLASS_FT_BC BIT(29)
#define RX_CLASS_FT_FW BIT(28)
#define RX_CLASS_FT_RCV BIT(27)
#define RX_CLASS_FT_VLAN BIT(26)
#define RX_CLASS_FT_DA_P BIT(25)
#define RX_CLASS_FT_DA_I BIT(24)
#define RX_CLASS_FT_FT1_MATCH_MASK GENMASK(23, 16)
#define RX_CLASS_FT_FT1_MATCH_SHIFT 16
#define RX_CLASS_FT_FT3_MATCH_MASK GENMASK(15, 0)
#define RX_CLASS_FT_FT3_MATCH_SHIFT 0
#define RX_CLASS_FT_FT1_MATCH(slot) \
((BIT(slot) << RX_CLASS_FT_FT1_MATCH_SHIFT) & \
RX_CLASS_FT_FT1_MATCH_MASK)
enum rx_class_sel_type {
RX_CLASS_SEL_TYPE_OR = 0,
RX_CLASS_SEL_TYPE_AND = 1,
RX_CLASS_SEL_TYPE_OR_AND_AND = 2,
RX_CLASS_SEL_TYPE_OR_OR_AND = 3,
};
#define FT1_CFG_SHIFT(n) (2 * (n))
#define FT1_CFG_MASK(n) (0x3 << FT1_CFG_SHIFT((n)))
#define RX_CLASS_SEL_SHIFT(n) (2 * (n))
#define RX_CLASS_SEL_MASK(n) (0x3 << RX_CLASS_SEL_SHIFT((n)))
#define ICSSG_CFG_OFFSET 0
#define MAC_INTERFACE_0 0x18
#define MAC_INTERFACE_1 0x1c
#define ICSSG_CFG_RX_L2_G_EN BIT(2)
/* these are register offsets per PRU */
struct miig_rt_offsets {
u32 mac0;
u32 mac1;
u32 ft1_start_len;
u32 ft1_cfg;
u32 ft1_slot_base;
u32 ft3_slot_base;
u32 ft3_p_base;
u32 ft_rx_ptr;
u32 rx_class_base;
u32 rx_class_cfg1;
u32 rx_class_cfg2;
u32 rx_class_gates_base;
u32 rx_green;
u32 rx_rate_cfg_base;
u32 rx_rate_src_sel0;
u32 rx_rate_src_sel1;
u32 tx_rate_cfg_base;
u32 stat_base;
u32 tx_hsr_tag;
u32 tx_hsr_seq;
u32 tx_vlan_type;
u32 tx_vlan_ins;
};
static struct miig_rt_offsets offs[] = {
/* PRU0 */
{
0x8,
0xc,
0x80,
0x84,
0x88,
0x108,
0x308,
0x408,
0x40c,
0x48c,
0x490,
0x494,
0x4d4,
0x4e4,
0x504,
0x508,
0x50c,
0x54c,
0x63c,
0x640,
0x644,
0x648,
},
/* PRU1 */
{
0x10,
0x14,
0x64c,
0x650,
0x654,
0x6d4,
0x8d4,
0x9d4,
0x9d8,
0xa58,
0xa5c,
0xa60,
0xaa0,
0xab0,
0xad0,
0xad4,
0xad8,
0xb18,
0xc08,
0xc0c,
0xc10,
0xc14,
},
};
static inline u32 addr_to_da0(const u8 *addr)
{
return (u32)(addr[0] | addr[1] << 8 |
addr[2] << 16 | addr[3] << 24);
};
static inline u32 addr_to_da1(const u8 *addr)
{
return (u32)(addr[4] | addr[5] << 8);
};
static void rx_class_ft1_set_start_len(struct regmap *miig_rt, int slice,
u16 start, u8 len)
{
u32 offset, val;
offset = offs[slice].ft1_start_len;
val = FT1_LEN(len) | FT1_START(start);
regmap_write(miig_rt, offset, val);
}
static void rx_class_ft1_set_da(struct regmap *miig_rt, int slice,
int n, const u8 *addr)
{
u32 offset;
offset = FT1_N_REG(slice, n, FT1_DA0);
regmap_write(miig_rt, offset, addr_to_da0(addr));
offset = FT1_N_REG(slice, n, FT1_DA1);
regmap_write(miig_rt, offset, addr_to_da1(addr));
}
static void rx_class_ft1_set_da_mask(struct regmap *miig_rt, int slice,
int n, const u8 *addr)
{
u32 offset;
offset = FT1_N_REG(slice, n, FT1_DA0_MASK);
regmap_write(miig_rt, offset, addr_to_da0(addr));
offset = FT1_N_REG(slice, n, FT1_DA1_MASK);
regmap_write(miig_rt, offset, addr_to_da1(addr));
}
static void rx_class_ft1_cfg_set_type(struct regmap *miig_rt, int slice, int n,
enum ft1_cfg_type type)
{
u32 offset;
offset = offs[slice].ft1_cfg;
regmap_update_bits(miig_rt, offset, FT1_CFG_MASK(n),
type << FT1_CFG_SHIFT(n));
}
static void rx_class_sel_set_type(struct regmap *miig_rt, int slice, int n,
enum rx_class_sel_type type)
{
u32 offset;
offset = offs[slice].rx_class_cfg1;
regmap_update_bits(miig_rt, offset, RX_CLASS_SEL_MASK(n),
type << RX_CLASS_SEL_SHIFT(n));
}
static void rx_class_set_and(struct regmap *miig_rt, int slice, int n,
u32 data)
{
u32 offset;
offset = RX_CLASS_N_REG(slice, n, RX_CLASS_AND_EN);
regmap_write(miig_rt, offset, data);
}
static void rx_class_set_or(struct regmap *miig_rt, int slice, int n,
u32 data)
{
u32 offset;
offset = RX_CLASS_N_REG(slice, n, RX_CLASS_OR_EN);
regmap_write(miig_rt, offset, data);
}
void icssg_class_set_host_mac_addr(struct regmap *miig_rt, u8 *mac)
{
regmap_write(miig_rt, MAC_INTERFACE_0, addr_to_da0(mac));
regmap_write(miig_rt, MAC_INTERFACE_1, addr_to_da1(mac));
}
void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac)
{
regmap_write(miig_rt, offs[slice].mac0, addr_to_da0(mac));
regmap_write(miig_rt, offs[slice].mac1, addr_to_da1(mac));
}
void icssg_class_disable_n(struct regmap *miig_rt, int slice, int n)
{
u32 data, offset;
/* AND_EN = 0 */
rx_class_set_and(miig_rt, slice, n, 0);
/* OR_EN = 0 */
rx_class_set_or(miig_rt, slice, n, 0);
/* set CFG1 to OR */
rx_class_sel_set_type(miig_rt, slice, n, RX_CLASS_SEL_TYPE_OR);
/* configure gate */
offset = RX_CLASS_GATES_N_REG(slice, n);
regmap_read(miig_rt, offset, &data);
/* clear class_raw so we go through filters */
data &= ~RX_CLASS_GATES_RAW_MASK;
/* set allow and phase mask */
data |= RX_CLASS_GATES_ALLOW_MASK | RX_CLASS_GATES_PHASE_MASK;
regmap_write(miig_rt, offset, data);
}
/* disable all RX traffic */
void icssg_class_disable(struct regmap *miig_rt, int slice)
{
int n;
/* Enable RX_L2_G */
regmap_update_bits(miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_RX_L2_G_EN,
ICSSG_CFG_RX_L2_G_EN);
for (n = 0; n < ICSSG_NUM_CLASSIFIERS; n++)
icssg_class_disable_n(miig_rt, slice, n);
/* FT1 Disabled */
for (n = 0; n < ICSSG_NUM_FT1_SLOTS; n++) {
u8 addr[] = { 0, 0, 0, 0, 0, 0, };
rx_class_ft1_cfg_set_type(miig_rt, slice, n,
FT1_CFG_TYPE_DISABLED);
rx_class_ft1_set_da(miig_rt, slice, n, addr);
rx_class_ft1_set_da_mask(miig_rt, slice, n, addr);
}
/* clear CFG2 */
regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
}
void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti)
{
u32 data;
/* defaults */
icssg_class_disable(miig_rt, slice);
/* Setup Classifier */
/* match on Broadcast or MAC_PRU address */
data = RX_CLASS_FT_BC | RX_CLASS_FT_DA_P;
/* multicast? */
if (allmulti)
data |= RX_CLASS_FT_MC;
rx_class_set_or(miig_rt, slice, 0, data);
/* set CFG1 for OR_OR_AND for classifier */
rx_class_sel_set_type(miig_rt, slice, 0,
RX_CLASS_SEL_TYPE_OR_OR_AND);
/* clear CFG2 */
regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
}
/* required for SR2 for SAV check */
void icssg_ft1_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac_addr)
{
u8 mask_addr[] = { 0, 0, 0, 0, 0, 0, };
rx_class_ft1_set_start_len(miig_rt, slice, 6, 6);
rx_class_ft1_set_da(miig_rt, slice, 0, mac_addr);
rx_class_ft1_set_da_mask(miig_rt, slice, 0, mask_addr);
rx_class_ft1_cfg_set_type(miig_rt, slice, 0, FT1_CFG_TYPE_EQ);
}

406
drivers/net/ti/icssg_config.c Normal file
View File

@@ -0,0 +1,406 @@
// SPDX-License-Identifier: GPL-2.0
/* ICSSG Ethernet driver
*
* Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com
*/
#include <phy.h>
#include "icssg_prueth.h"
#include "icssg_switch_map.h"
#include "icss_mii_rt.h"
#include <dm/device_compat.h>
/* TX IPG Values to be set for 100M and 1G link speeds. These values are
* in ocp_clk cycles. So need change if ocp_clk is changed for a specific
* h/w design.
*/
/* SR2.0 IPG is in rgmii_clk (125MHz) clock cycles + 1 */
#define MII_RT_TX_IPG_100M 0x17
#define MII_RT_TX_IPG_1G 0xb
#define ICSSG_QUEUES_MAX 64
#define ICSSG_QUEUE_OFFSET 0xd00
#define ICSSG_QUEUE_PEEK_OFFSET 0xe00
#define ICSSG_QUEUE_CNT_OFFSET 0xe40
#define ICSSG_QUEUE_RESET_OFFSET 0xf40
#define ICSSG_NUM_TX_QUEUES 8
#define RECYCLE_Q_SLICE0 16
#define RECYCLE_Q_SLICE1 17
#define ICSSG_NUM_OTHER_QUEUES 5 /* port, host and special queues */
#define PORT_HI_Q_SLICE0 32
#define PORT_LO_Q_SLICE0 33
#define HOST_HI_Q_SLICE0 34
#define HOST_LO_Q_SLICE0 35
#define HOST_SPL_Q_SLICE0 40 /* Special Queue */
#define PORT_HI_Q_SLICE1 36
#define PORT_LO_Q_SLICE1 37
#define HOST_HI_Q_SLICE1 38
#define HOST_LO_Q_SLICE1 39
#define HOST_SPL_Q_SLICE1 41 /* Special Queue */
#define MII_RXCFG_DEFAULT (PRUSS_MII_RT_RXCFG_RX_ENABLE | \
PRUSS_MII_RT_RXCFG_RX_DATA_RDY_MODE_DIS | \
PRUSS_MII_RT_RXCFG_RX_L2_EN | \
PRUSS_MII_RT_RXCFG_RX_L2_EOF_SCLR_DIS)
#define MII_TXCFG_DEFAULT (PRUSS_MII_RT_TXCFG_TX_ENABLE | \
PRUSS_MII_RT_TXCFG_TX_AUTO_PREAMBLE | \
PRUSS_MII_RT_TXCFG_TX_32_MODE_EN | \
PRUSS_MII_RT_TXCFG_TX_IPG_WIRE_CLK_EN)
#define ICSSG_CFG_DEFAULT (ICSSG_CFG_TX_L1_EN | \
ICSSG_CFG_TX_L2_EN | ICSSG_CFG_RX_L2_G_EN | \
ICSSG_CFG_TX_PRU_EN | /* SR2.0 only */ \
ICSSG_CFG_SGMII_MODE)
#define FDB_GEN_CFG1 0x60
#define SMEM_VLAN_OFFSET 8
#define SMEM_VLAN_OFFSET_MASK GENMASK(25, 8)
#define FDB_GEN_CFG2 0x64
#define FDB_VLAN_EN BIT(6)
#define FDB_HOST_EN BIT(2)
#define FDB_PRU1_EN BIT(1)
#define FDB_PRU0_EN BIT(0)
#define FDB_EN_ALL (FDB_PRU0_EN | FDB_PRU1_EN | \
FDB_HOST_EN | FDB_VLAN_EN)
struct map {
int queue;
u32 pd_addr_start;
u32 flags;
bool special;
};
struct map hwq_map[2][ICSSG_NUM_OTHER_QUEUES] = {
{
{ PORT_HI_Q_SLICE0, PORT_DESC0_HI, 0x200000, 0 },
{ PORT_LO_Q_SLICE0, PORT_DESC0_LO, 0, 0 },
{ HOST_HI_Q_SLICE0, HOST_DESC0_HI, 0x200000, 0 },
{ HOST_LO_Q_SLICE0, HOST_DESC0_LO, 0, 0 },
{ HOST_SPL_Q_SLICE0, HOST_SPPD0, 0x400000, 1 },
},
{
{ PORT_HI_Q_SLICE1, PORT_DESC1_HI, 0xa00000, 0 },
{ PORT_LO_Q_SLICE1, PORT_DESC1_LO, 0x800000, 0 },
{ HOST_HI_Q_SLICE1, HOST_DESC1_HI, 0xa00000, 0 },
{ HOST_LO_Q_SLICE1, HOST_DESC1_LO, 0x800000, 0 },
{ HOST_SPL_Q_SLICE1, HOST_SPPD1, 0xc00000, 1 },
},
};
static void icssg_config_mii_init(struct prueth_priv *priv, int slice)
{
struct prueth *prueth = priv->prueth;
struct regmap *mii_rt = prueth->mii_rt;
u32 txcfg_reg, pcnt_reg;
u32 txcfg;
txcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_TXCFG0 :
PRUSS_MII_RT_TXCFG1;
pcnt_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RX_PCNT0 :
PRUSS_MII_RT_RX_PCNT1;
txcfg = MII_TXCFG_DEFAULT;
if (prueth->phy_interface == PHY_INTERFACE_MODE_MII && slice == ICSS_MII0)
txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
else if (prueth->phy_interface != PHY_INTERFACE_MODE_MII && slice == ICSS_MII1)
txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
regmap_write(mii_rt, txcfg_reg, txcfg);
regmap_write(mii_rt, pcnt_reg, 0x1);
}
static void icssg_miig_queues_init(struct prueth_priv *priv, int slice)
{
struct prueth *prueth = priv->prueth;
void __iomem *smem = (void __iomem *)prueth->shram.pa;
struct regmap *miig_rt = prueth->miig_rt;
int queue = 0, i, j;
u8 pd[ICSSG_SPECIAL_PD_SIZE];
u32 *pdword;
/* reset hwqueues */
if (slice)
queue = ICSSG_NUM_TX_QUEUES;
for (i = 0; i < ICSSG_NUM_TX_QUEUES; i++) {
regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
queue++;
}
queue = slice ? RECYCLE_Q_SLICE1 : RECYCLE_Q_SLICE0;
regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
for (i = 0; i < ICSSG_NUM_OTHER_QUEUES; i++) {
regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET,
hwq_map[slice][i].queue);
}
/* initialize packet descriptors in SMEM */
/* push pakcet descriptors to hwqueues */
pdword = (u32 *)pd;
for (j = 0; j < ICSSG_NUM_OTHER_QUEUES; j++) {
struct map *mp;
int pd_size, num_pds;
u32 pdaddr;
mp = &hwq_map[slice][j];
if (mp->special) {
pd_size = ICSSG_SPECIAL_PD_SIZE;
num_pds = ICSSG_NUM_SPECIAL_PDS;
} else {
pd_size = ICSSG_NORMAL_PD_SIZE;
num_pds = ICSSG_NUM_NORMAL_PDS;
}
for (i = 0; i < num_pds; i++) {
memset(pd, 0, pd_size);
pdword[0] &= cpu_to_le32(ICSSG_FLAG_MASK);
pdword[0] |= cpu_to_le32(mp->flags);
pdaddr = mp->pd_addr_start + i * pd_size;
memcpy_toio(smem + pdaddr, pd, pd_size);
queue = mp->queue;
regmap_write(miig_rt, ICSSG_QUEUE_OFFSET + 4 * queue,
pdaddr);
}
}
}
void icssg_config_ipg(struct prueth_priv *priv, int speed, int mii)
{
struct prueth *prueth = priv->prueth;
switch (speed) {
case SPEED_1000:
icssg_mii_update_ipg(prueth->mii_rt, mii, MII_RT_TX_IPG_1G);
break;
case SPEED_100:
icssg_mii_update_ipg(prueth->mii_rt, mii, MII_RT_TX_IPG_100M);
break;
default:
/* Other links speeds not supported */
pr_err("Unsupported link speed\n");
return;
}
}
static void emac_r30_cmd_init(struct prueth_priv *priv)
{
struct prueth *prueth = priv->prueth;
struct icssg_r30_cmd *p;
int i;
p = (struct icssg_r30_cmd *)(prueth->dram[priv->port_id].pa + MGR_R30_CMD_OFFSET);
for (i = 0; i < 4; i++)
writel(EMAC_NONE, &p->cmd[i]);
}
static int emac_r30_is_done(struct prueth_priv *priv)
{
struct prueth *prueth = priv->prueth;
const struct icssg_r30_cmd *p;
int i;
u32 cmd;
p = (const struct icssg_r30_cmd *)(prueth->dram[priv->port_id].pa + MGR_R30_CMD_OFFSET);
for (i = 0; i < 4; i++) {
cmd = readl(&p->cmd[i]);
if (cmd != EMAC_NONE)
return 0;
}
return 1;
}
static int prueth_emac_buffer_setup(struct prueth_priv *priv)
{
struct prueth *prueth = priv->prueth;
struct icssg_buffer_pool_cfg *bpool_cfg;
struct icssg_rxq_ctx *rxq_ctx;
int slice = priv->port_id;
u32 addr;
int i;
/* Layout to have 64KB aligned buffer pool
* |BPOOL0|BPOOL1|RX_CTX0|RX_CTX1|
*/
addr = lower_32_bits(prueth->sram_pa);
if (slice)
addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
if (addr % SZ_64K) {
dev_warn(prueth->dev, "buffer pool needs to be 64KB aligned\n");
return -EINVAL;
}
bpool_cfg = (struct icssg_buffer_pool_cfg *)(prueth->dram[priv->port_id].pa + BUFFER_POOL_0_ADDR_OFFSET);
/* workaround for f/w bug. bpool 0 needs to be initilalized */
bpool_cfg[0].addr = cpu_to_le32(addr);
bpool_cfg[0].len = 0;
for (i = PRUETH_EMAC_BUF_POOL_START;
i < (PRUETH_EMAC_BUF_POOL_START + PRUETH_NUM_BUF_POOLS);
i++) {
bpool_cfg[i].addr = cpu_to_le32(addr);
bpool_cfg[i].len = cpu_to_le32(PRUETH_EMAC_BUF_POOL_SIZE);
addr += PRUETH_EMAC_BUF_POOL_SIZE;
}
if (!slice)
addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
else
addr += PRUETH_EMAC_RX_CTX_BUF_SIZE * 2;
rxq_ctx = (struct icssg_rxq_ctx *)(prueth->dram[priv->port_id].pa + HOST_RX_Q_PRE_CONTEXT_OFFSET);
for (i = 0; i < 3; i++)
rxq_ctx->start[i] = cpu_to_le32(addr);
addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
rxq_ctx->end = cpu_to_le32(addr);
/* Express RX buffer queue */
rxq_ctx = (struct icssg_rxq_ctx *)(prueth->dram[priv->port_id].pa + HOST_RX_Q_EXP_CONTEXT_OFFSET);
for (i = 0; i < 3; i++)
rxq_ctx->start[i] = cpu_to_le32(addr);
addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
rxq_ctx->end = cpu_to_le32(addr);
return 0;
}
static void icssg_init_emac_mode(struct prueth *prueth)
{
u8 mac[6] = { 0 };
regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK, 0);
regmap_write(prueth->miig_rt, FDB_GEN_CFG2, 0);
/* Clear host MAC address */
icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
}
int icssg_config(struct prueth_priv *priv)
{
struct prueth *prueth = priv->prueth;
void *config = (void *)(prueth->dram[priv->port_id].pa + ICSSG_CONFIG_OFFSET);
u8 *cfg_byte_ptr = config;
struct icssg_flow_cfg *flow_cfg;
u32 mask;
int ret;
int slice = priv->port_id;
icssg_init_emac_mode(prueth);
memset_io(config, 0, TAS_GATE_MASK_LIST0);
icssg_miig_queues_init(priv, slice);
prueth->speed = SPEED_1000;
prueth->duplex = DUPLEX_FULL;
if (!phy_interface_is_rgmii(priv->phydev)) {
prueth->speed = SPEED_100;
prueth->duplex = DUPLEX_FULL;
}
regmap_update_bits(prueth->miig_rt, ICSSG_CFG_OFFSET,
ICSSG_CFG_DEFAULT, ICSSG_CFG_DEFAULT);
icssg_miig_set_interface_mode(prueth->miig_rt, ICSS_MII0, prueth->phy_interface);
icssg_miig_set_interface_mode(prueth->miig_rt, ICSS_MII1, prueth->phy_interface);
icssg_config_mii_init(priv, slice);
icssg_config_ipg(priv, SPEED_1000, slice);
icssg_update_rgmii_cfg(prueth->miig_rt, SPEED_1000, true, slice, priv);
/* set GPI mode */
pruss_cfg_gpimode(prueth->pruss, slice, PRUSS_GPI_MODE_MII);
/* enable XFR shift for PRU and RTU */
mask = PRUSS_SPP_XFER_SHIFT_EN | PRUSS_SPP_RTU_XFR_SHIFT_EN;
pruss_cfg_update(prueth->pruss, PRUSS_CFG_SPP, mask, mask);
flow_cfg = config + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
flow_cfg->rx_base_flow = prueth->dma_rx.id;
flow_cfg->mgm_base_flow = 0;
*(cfg_byte_ptr + SPL_PKT_DEFAULT_PRIORITY) = 0;
*(cfg_byte_ptr + QUEUE_NUM_UNTAGGED) = 0x0;
ret = prueth_emac_buffer_setup(priv);
if (ret)
return ret;
emac_r30_cmd_init(priv);
return 0;
}
/* commands to program ICSSG R30 registers */
static struct icssg_r30_cmd emac_r32_bitmask[] = {
{{0xffff0004, 0xffff0100, 0xffff0004, EMAC_NONE}}, /* EMAC_PORT_DISABLE */
{{0xfffb0040, 0xfeff0200, 0xfeff0200, EMAC_NONE}}, /* EMAC_PORT_BLOCK */
{{0xffbb0000, 0xfcff0000, 0xdcfb0000, EMAC_NONE}}, /* EMAC_PORT_FORWARD */
{{0xffbb0000, 0xfcff0000, 0xfcff2000, EMAC_NONE}}, /* EMAC_PORT_FORWARD_WO_LEARNING */
{{0xffff0001, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT ALL */
{{0xfffe0002, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT TAGGED */
{{0xfffc0000, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT UNTAGGED and PRIO */
{{EMAC_NONE, 0xffff0020, EMAC_NONE, EMAC_NONE}}, /* TAS Trigger List change */
{{EMAC_NONE, 0xdfff1000, EMAC_NONE, EMAC_NONE}}, /* TAS set state ENABLE*/
{{EMAC_NONE, 0xefff2000, EMAC_NONE, EMAC_NONE}}, /* TAS set state RESET*/
{{EMAC_NONE, 0xcfff0000, EMAC_NONE, EMAC_NONE}}, /* TAS set state DISABLE*/
{{EMAC_NONE, EMAC_NONE, 0xffff0400, EMAC_NONE}}, /* UC flooding ENABLE*/
{{EMAC_NONE, EMAC_NONE, 0xfbff0000, EMAC_NONE}}, /* UC flooding DISABLE*/
{{EMAC_NONE, EMAC_NONE, 0xffff0800, EMAC_NONE}}, /* MC flooding ENABLE*/
{{EMAC_NONE, EMAC_NONE, 0xf7ff0000, EMAC_NONE}}, /* MC flooding DISABLE*/
{{EMAC_NONE, 0xffff4000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx ENABLE*/
{{EMAC_NONE, 0xbfff0000, EMAC_NONE, EMAC_NONE}} /* Preemption on Tx DISABLE*/
};
int emac_set_port_state(struct prueth_priv *priv,
enum icssg_port_state_cmd cmd)
{
struct prueth *prueth = priv->prueth;
struct icssg_r30_cmd *p;
int ret = -ETIMEDOUT;
int timeout = 10;
int i;
p = (struct icssg_r30_cmd *)(prueth->dram[priv->port_id].pa + MGR_R30_CMD_OFFSET);
if (cmd >= ICSSG_EMAC_PORT_MAX_COMMANDS) {
dev_err(prueth->dev, "invalid port command\n");
return -EINVAL;
}
for (i = 0; i < 4; i++)
writel(emac_r32_bitmask[cmd].cmd[i], &p->cmd[i]);
/* wait for done */
while (timeout) {
if (emac_r30_is_done(priv)) {
ret = 0;
break;
}
udelay(2000);
timeout--;
}
if (ret == -ETIMEDOUT)
dev_err(prueth->dev, "timeout waiting for command done\n");
return ret;
}

177
drivers/net/ti/icssg_config.h Normal file
View File

@@ -0,0 +1,177 @@
/* SPDX-License-Identifier: GPL-2.0 */
/* Texas Instruments ICSSG Ethernet driver
*
* Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
*
*/
#ifndef __NET_TI_ICSSG_CONFIG_H
#define __NET_TI_ICSSG_CONFIG_H
struct icssg_buffer_pool_cfg {
__le32 addr;
__le32 len;
} __packed;
struct icssg_flow_cfg {
__le16 rx_base_flow;
__le16 mgm_base_flow;
} __packed;
/* Config area lies in shared RAM */
#define ICSSG_CONFIG_OFFSET_SLICE0 0
#define ICSSG_CONFIG_OFFSET_SLICE1 0x8000
/* pstate speed/duplex command to set speed and duplex settings
* in firmware.
* Command format : 0x8102ssPN. ss - sequence number: currently not
* used by driver, P - port number: For switch, N - Speed/Duplex state
* - Possible values of N:
* 0x0 - 10Mbps/Half duplex ;
* 0x8 - 10Mbps/Full duplex ;
* 0x2 - 100Mbps/Half duplex;
* 0xa - 100Mbps/Full duplex;
* 0xc - 1Gbps/Full duplex;
* NOTE: The above are same as bits [3..1](slice 0) or bits [8..6](slice 1) of
* RGMII CFG register. So suggested to read the register to populate the command
* bits.
*/
#define ICSSG_PSTATE_SPEED_DUPLEX_CMD 0x81020000
#define ICSSG_PSTATE_FULL_DUPLEX BIT(3)
#define ICSSG_PSTATE_SPEED_100 BIT(1)
#define ICSSG_PSTATE_SPEED_1000 BIT(2)
/* Flow IDs used in config structure to firmware. Should match with
* flow_id in struct dma for rx channels.
*/
#define ICSSG_RX_CHAN_FLOW_ID 0 /* flow id for host port */
#define ICSSG_RX_MGM_CHAN_FLOW_ID 1 /* flow id for command response */
/* Used to notify the FW of the current link speed */
#define PORT_LINK_SPEED_OFFSET 0x00A8
#define FW_LINK_SPEED_1G (0x00)
#define FW_LINK_SPEED_100M (0x01)
#define FW_LINK_SPEED_10M (0x02)
#define FW_LINK_SPEED_HD (0x80)
#define PRUETH_PKT_TYPE_CMD 0x10
#define PRUETH_NAV_PS_DATA_SIZE 16 /* Protocol specific data size */
#define PRUETH_NAV_SW_DATA_SIZE 16 /* SW related data size */
#define PRUETH_MAX_RX_FLOWS 1 /* excluding default flow */
#define PRUETH_RX_FLOW_DATA 0 /* FIXME: f/w bug to change to highest priority flow */
#define PRUETH_EMAC_BUF_POOL_SIZE SZ_8K
#define PRUETH_EMAC_POOLS_PER_SLICE 24
#define PRUETH_EMAC_BUF_POOL_START 8
#define PRUETH_NUM_BUF_POOLS 8
#define PRUETH_EMAC_RX_CTX_BUF_SIZE SZ_16K /* per slice */
#define MSMC_RAM_SIZE (2 * (PRUETH_EMAC_BUF_POOL_SIZE * PRUETH_NUM_BUF_POOLS + \
PRUETH_EMAC_RX_CTX_BUF_SIZE))
struct icssg_rxq_ctx {
__le32 start[3];
__le32 end;
} __packed;
/* Load time Fiwmware Configuration */
#define ICSSG_FW_MGMT_CMD_HEADER 0x81
#define ICSSG_FW_MGMT_FDB_CMD_TYPE 0x03
#define ICSSG_FW_MGMT_CMD_TYPE 0x04
#define ICSSG_FW_MGMT_PKT 0x80000000
struct icssg_r30_cmd {
u32 cmd[4];
} __packed;
enum icssg_port_state_cmd {
ICSSG_EMAC_PORT_DISABLE = 0,
ICSSG_EMAC_PORT_BLOCK,
ICSSG_EMAC_PORT_FORWARD,
ICSSG_EMAC_PORT_FORWARD_WO_LEARNING,
ICSSG_EMAC_PORT_ACCEPT_ALL,
ICSSG_EMAC_PORT_ACCEPT_TAGGED,
ICSSG_EMAC_PORT_ACCEPT_UNTAGGED_N_PRIO,
ICSSG_EMAC_PORT_TAS_TRIGGER,
ICSSG_EMAC_PORT_TAS_ENABLE,
ICSSG_EMAC_PORT_TAS_RESET,
ICSSG_EMAC_PORT_TAS_DISABLE,
ICSSG_EMAC_PORT_UC_FLOODING_ENABLE,
ICSSG_EMAC_PORT_UC_FLOODING_DISABLE,
ICSSG_EMAC_PORT_MC_FLOODING_ENABLE,
ICSSG_EMAC_PORT_MC_FLOODING_DISABLE,
ICSSG_EMAC_PORT_PREMPT_TX_ENABLE,
ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
ICSSG_EMAC_PORT_MAX_COMMANDS
};
#define EMAC_NONE 0xffff0000
#define EMAC_PRU0_P_DI 0xffff0004
#define EMAC_PRU1_P_DI 0xffff0040
#define EMAC_TX_P_DI 0xffff0100
#define EMAC_PRU0_P_EN 0xfffb0000
#define EMAC_PRU1_P_EN 0xffbf0000
#define EMAC_TX_P_EN 0xfeff0000
#define EMAC_P_BLOCK 0xffff0040
#define EMAC_TX_P_BLOCK 0xffff0200
#define EMAC_P_UNBLOCK 0xffbf0000
#define EMAC_TX_P_UNBLOCK 0xfdff0000
#define EMAC_LEAN_EN 0xfff70000
#define EMAC_LEAN_DI 0xffff0008
#define EMAC_ACCEPT_ALL 0xffff0001
#define EMAC_ACCEPT_TAG 0xfffe0002
#define EMAC_ACCEPT_PRIOR 0xfffc0000
/* Config area lies in DRAM */
#define ICSSG_CONFIG_OFFSET 0x0
#define ICSSG_NUM_NORMAL_PDS 64
#define ICSSG_NUM_SPECIAL_PDS 16
#define ICSSG_NORMAL_PD_SIZE 8
#define ICSSG_SPECIAL_PD_SIZE 20
#define ICSSG_FLAG_MASK 0xff00ffff
struct icssg_setclock_desc {
u8 request;
u8 restore;
u8 acknowledgment;
u8 cmp_status;
u32 margin;
u32 cyclecounter0_set;
u32 cyclecounter1_set;
u32 iepcount_set;
u32 rsvd1;
u32 rsvd2;
u32 CMP0_current;
u32 iepcount_current;
u32 difference;
u32 cyclecounter0_new;
u32 cyclecounter1_new;
u32 CMP0_new;
} __packed;
#define ICSSG_CMD_POP_SLICE0 56
#define ICSSG_CMD_POP_SLICE1 60
#define ICSSG_CMD_PUSH_SLICE0 57
#define ICSSG_CMD_PUSH_SLICE1 61
#define ICSSG_RSP_POP_SLICE0 58
#define ICSSG_RSP_POP_SLICE1 62
#define ICSSG_RSP_PUSH_SLICE0 56
#define ICSSG_RSP_PUSH_SLICE1 60
#define ICSSG_TS_POP_SLICE0 59
#define ICSSG_TS_POP_SLICE1 63
#define ICSSG_TS_PUSH_SLICE0 40
#define ICSSG_TS_PUSH_SLICE1 41
#endif /* __NET_TI_ICSSG_CONFIG_H */

83
drivers/net/ti/icssg_prueth.h Normal file
View File

@@ -0,0 +1,83 @@
/* SPDX-License-Identifier: GPL-2.0 */
/* Texas Instruments K3 AM65 Ethernet Switch SubSystem Driver
*
* Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
*
*/
#ifndef __NET_TI_ICSSG_PRUETH_H
#define __NET_TI_ICSSG_PRUETH_H
#include <asm/io.h>
#include <clk.h>
#include <dm/lists.h>
#include <dm/ofnode.h>
#include <dm/device.h>
#include <dma-uclass.h>
#include <regmap.h>
#include <linux/sizes.h>
#include <linux/pruss_driver.h>
#include "icssg_config.h"
#include "icssg_switch_map.h"
void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac);
void icssg_class_set_host_mac_addr(struct regmap *miig_rt, u8 *mac);
void icssg_class_disable(struct regmap *miig_rt, int slice);
void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti);
void icssg_ft1_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac_addr);
enum prueth_mac {
PRUETH_MAC0 = 0,
PRUETH_MAC1,
PRUETH_NUM_MACS,
};
enum prueth_port {
PRUETH_PORT_HOST = 0, /* host side port */
PRUETH_PORT_MII0, /* physical port MII 0 */
PRUETH_PORT_MII1, /* physical port MII 1 */
};
struct prueth {
struct udevice *dev;
struct udevice *pruss;
struct regmap *miig_rt;
struct regmap *mii_rt;
fdt_addr_t mdio_base;
struct pruss_mem_region shram;
struct pruss_mem_region dram[PRUETH_NUM_MACS];
phys_addr_t tmaddr;
struct mii_dev *bus;
u32 sram_pa;
ofnode eth_node[PRUETH_NUM_MACS];
u32 mdio_freq;
int phy_interface;
struct clk mdiofck;
struct dma dma_tx;
struct dma dma_rx;
struct dma dma_rx_mgm;
u32 rx_next;
u32 rx_pend;
int slice;
bool mdio_manual_mode;
int speed;
int duplex;
};
struct prueth_priv {
struct udevice *dev;
struct prueth *prueth;
u32 port_id;
struct phy_device *phydev;
bool has_phy;
ofnode phy_node;
u32 phy_addr;
int phy_interface;
};
/* config helpers */
void icssg_config_ipg(struct prueth_priv *priv, int speed, int mii);
int icssg_config(struct prueth_priv *priv);
int emac_set_port_state(struct prueth_priv *priv, enum icssg_port_state_cmd cmd);
#endif /* __NET_TI_ICSSG_PRUETH_H */