mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 15:03:58 +03:00
ARM: dts: renesas: Drop DTs with OF_UPSTREAM counterparts
Remove DTs which are now replaced by OF_UPSTREAM counterparts. No functional change expected. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Adam Ford <aford173@gmail.com> #beacon boards
This commit is contained in:
Marek Vasut
@@ -958,41 +958,7 @@ dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
|
||||
imxrt1020-evk.dtb \
|
||||
imxrt1170-evk.dtb \
|
||||
|
||||
dtb-$(CONFIG_RCAR_GEN2) += \
|
||||
r8a7790-lager.dtb \
|
||||
r8a7790-stout.dtb \
|
||||
r8a7791-koelsch.dtb \
|
||||
r8a7791-porter.dtb \
|
||||
r8a7792-blanche.dtb \
|
||||
r8a7793-gose.dtb \
|
||||
r8a7794-alt.dtb \
|
||||
r8a7794-silk.dtb
|
||||
|
||||
dtb-$(CONFIG_RCAR_GEN3) += \
|
||||
r8a774a1-beacon-rzg2m-kit.dtb \
|
||||
r8a774b1-beacon-rzg2n-kit.dtb \
|
||||
r8a774e1-beacon-rzg2h-kit.dtb \
|
||||
r8a774a1-hihope-rzg2m.dtb \
|
||||
r8a774b1-hihope-rzg2n.dtb \
|
||||
r8a774c0-ek874.dtb \
|
||||
r8a774e1-hihope-rzg2h.dtb \
|
||||
r8a77951-ulcb.dtb \
|
||||
r8a77951-salvator-x.dtb \
|
||||
r8a77960-ulcb.dtb \
|
||||
r8a77960-salvator-x.dtb \
|
||||
r8a77965-ulcb.dtb \
|
||||
r8a77965-salvator-x.dtb \
|
||||
r8a77970-eagle.dtb \
|
||||
r8a77970-v3msk.dtb \
|
||||
r8a77980-condor.dtb \
|
||||
r8a77980-v3hsk.dtb \
|
||||
r8a77990-ebisu.dtb \
|
||||
r8a77995-draak.dtb
|
||||
|
||||
dtb-$(CONFIG_RCAR_GEN4) += \
|
||||
r8a779a0-falcon.dtb \
|
||||
r8a779f0-spider.dtb \
|
||||
r8a779g0-white-hawk.dtb \
|
||||
r8a779h0-gray-hawk.dtb
|
||||
|
||||
dtb-$(CONFIG_TARGET_RZG2L) += \
|
||||
|
||||
@@ -1,60 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright 2020, Compass Electronics Group, LLC
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "r8a774a1.dtsi"
|
||||
#include "beacon-renesom-som.dtsi"
|
||||
#include "beacon-renesom-baseboard.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Beacon EmbeddedWorks RZ/G2M Development Kit";
|
||||
compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
i2c5 = &i2c5;
|
||||
i2c6 = &i2c6;
|
||||
i2c7 = &iic_pmic;
|
||||
serial0 = &scif2;
|
||||
serial1 = &hscif0;
|
||||
serial2 = &hscif1;
|
||||
serial3 = &scif0;
|
||||
serial4 = &hscif2;
|
||||
serial5 = &scif5;
|
||||
ethernet0 = &avb;
|
||||
mmc0 = &sdhi3;
|
||||
mmc1 = &sdhi0;
|
||||
mmc2 = &sdhi2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@600000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x6 0x00000000 0x0 0x80000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 722>,
|
||||
<&versaclock5 1>,
|
||||
<&x302_clk>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.2",
|
||||
"dclkin.0", "dclkin.1", "dclkin.2";
|
||||
};
|
||||
@@ -1,21 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
|
||||
* sub board
|
||||
*
|
||||
* Copyright (C) 2020 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
#include "r8a774a1-hihope-rzg2m.dts"
|
||||
#include "hihope-rzg2-ex.dtsi"
|
||||
|
||||
/ {
|
||||
model = "HopeRun HiHope RZ/G2M with sub board";
|
||||
compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
|
||||
"renesas,r8a774a1";
|
||||
};
|
||||
|
||||
/* SW43 should be OFF, if in ON state SATA port will be activated */
|
||||
&pciec1 {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -1,37 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
|
||||
*
|
||||
* Copyright (C) 2020 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a774a1.dtsi"
|
||||
#include "hihope-rev4.dtsi"
|
||||
|
||||
/ {
|
||||
model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
|
||||
compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
|
||||
memory@600000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x6 0x00000000 0x0 0x80000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 722>,
|
||||
<&versaclock5 1>,
|
||||
<&x302_clk>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.2",
|
||||
"dclkin.0", "dclkin.1", "dclkin.2";
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,56 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright 2020, Compass Electronics Group, LLC
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "r8a774b1.dtsi"
|
||||
#include "beacon-renesom-som.dtsi"
|
||||
#include "beacon-renesom-baseboard.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Beacon Embedded Works RZ/G2N Development Kit";
|
||||
compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
i2c5 = &i2c5;
|
||||
i2c6 = &i2c6;
|
||||
i2c7 = &iic_pmic;
|
||||
serial0 = &scif2;
|
||||
serial1 = &hscif0;
|
||||
serial2 = &hscif1;
|
||||
serial3 = &scif0;
|
||||
serial4 = &hscif2;
|
||||
serial5 = &scif5;
|
||||
serial6 = &scif4;
|
||||
ethernet0 = &avb;
|
||||
mmc0 = &sdhi3;
|
||||
mmc1 = &sdhi0;
|
||||
mmc2 = &sdhi2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 721>,
|
||||
<&versaclock5 1>,
|
||||
<&x302_clk>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.3",
|
||||
"dclkin.0", "dclkin.1", "dclkin.3";
|
||||
};
|
||||
@@ -1,21 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 connected to
|
||||
* sub board
|
||||
*
|
||||
* Copyright (C) 2020 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
#include "r8a774b1-hihope-rzg2n.dts"
|
||||
#include "hihope-rzg2-ex.dtsi"
|
||||
|
||||
/ {
|
||||
model = "HopeRun HiHope RZ/G2N with sub board";
|
||||
compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n",
|
||||
"renesas,r8a774b1";
|
||||
};
|
||||
|
||||
/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -1,41 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the HiHope RZ/G2N main board Rev.3.0/4.0
|
||||
*
|
||||
* Copyright (C) 2020 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a774b1.dtsi"
|
||||
#include "hihope-rev4.dtsi"
|
||||
|
||||
/ {
|
||||
model = "HopeRun HiHope RZ/G2N main board based on r8a774b1";
|
||||
compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
|
||||
memory@480000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x4 0x80000000 0x0 0x80000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 721>,
|
||||
<&versaclock5 1>,
|
||||
<&x302_clk>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.3",
|
||||
"dclkin.0", "dclkin.1", "dclkin.3";
|
||||
};
|
||||
|
||||
&sdhi3 {
|
||||
mmc-hs400-1_8v;
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,455 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874)
|
||||
*
|
||||
* Copyright (C) 2019 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a774c0.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/display/tda998x.h>
|
||||
|
||||
/ {
|
||||
model = "Silicon Linux RZ/G2E 96board platform (CAT874)";
|
||||
compatible = "si-linux,cat874", "renesas,r8a774c0";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif2;
|
||||
serial1 = &hscif2;
|
||||
mmc0 = &sdhi0;
|
||||
mmc1 = &sdhi3;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_out: endpoint {
|
||||
remote-endpoint = <&tda19988_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led0 {
|
||||
gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED0";
|
||||
};
|
||||
|
||||
led1 {
|
||||
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED1";
|
||||
};
|
||||
|
||||
led2 {
|
||||
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED2";
|
||||
};
|
||||
|
||||
led3 {
|
||||
gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED3";
|
||||
};
|
||||
};
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
|
||||
reg_12p0v: regulator-12p0v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "D12.0V";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sound: sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,name = "CAT874 HDMI sound";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,bitclock-master = <&sndcpu>;
|
||||
simple-audio-card,frame-master = <&sndcpu>;
|
||||
|
||||
sndcodec: simple-audio-card,codec {
|
||||
sound-dai = <&tda19988>;
|
||||
};
|
||||
|
||||
sndcpu: simple-audio-card,cpu {
|
||||
sound-dai = <&rcar_sound>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI0 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
wlan_en_reg: fixedregulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "wlan-en-regulator";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
startup-delay-us = <70000>;
|
||||
|
||||
gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
x13_clk: x13 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
data-role = "dual";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
hs_ep: endpoint {
|
||||
remote-endpoint = <&usb3_hs_ep>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
ss_ep: endpoint {
|
||||
remote-endpoint = <&hd3ss3220_in_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&audio_clk_a {
|
||||
clock-frequency = <22579200>;
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&x13_clk>;
|
||||
clock-names = "du.0", "du.1", "dclkin.0";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
du_out_rgb: endpoint {
|
||||
remote-endpoint = <&tda19988_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
||||
&hscif2 {
|
||||
pinctrl-0 = <&hscif2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "ti,wl1837-st";
|
||||
enable-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
hd3ss3220@47 {
|
||||
compatible = "ti,hd3ss3220";
|
||||
reg = <0x47>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
hd3ss3220_in_ep: endpoint {
|
||||
remote-endpoint = <&ss_ep>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
hd3ss3220_out_ep: endpoint {
|
||||
remote-endpoint = <&usb3_role_switch>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
tda19988: tda19988@70 {
|
||||
compatible = "nxp,tda998x";
|
||||
reg = <0x70>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
video-ports = <0x234501>;
|
||||
|
||||
#sound-dai-cells = <0>;
|
||||
audio-ports = <TDA998x_I2S 0x03>;
|
||||
clocks = <&rcar_sound 1>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
tda19988_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
tda19988_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
rtc@32 {
|
||||
compatible = "epson,rx8571";
|
||||
reg = <0x32>;
|
||||
};
|
||||
};
|
||||
|
||||
&lvds0 {
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
|
||||
clock-names = "fck", "dclkin.0", "extal";
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_bus_clk {
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
|
||||
&pciec0 {
|
||||
/* Map all possible DDR as inbound ranges */
|
||||
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
du_pins: du {
|
||||
groups = "du_rgb888", "du_clk_out_0", "du_sync", "du_disp",
|
||||
"du_clk_in_0";
|
||||
function = "du";
|
||||
};
|
||||
|
||||
hscif2_pins: hscif2 {
|
||||
groups = "hscif2_data_a", "hscif2_ctrl_a";
|
||||
function = "hscif2";
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
groups = "i2c1_b";
|
||||
function = "i2c1";
|
||||
};
|
||||
|
||||
scif2_pins: scif2 {
|
||||
groups = "scif2_data_a";
|
||||
function = "scif2";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi0_pins_uhs: sd0_uhs {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi3_pins: sd3 {
|
||||
groups = "sdhi3_data4", "sdhi3_ctrl";
|
||||
function = "sdhi3";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sound_clk_pins: sound_clk {
|
||||
groups = "audio_clkout1_a";
|
||||
function = "audio_clk";
|
||||
};
|
||||
|
||||
sound_pins: sound {
|
||||
groups = "ssi01239_ctrl", "ssi0_data";
|
||||
function = "ssi";
|
||||
};
|
||||
|
||||
usb30_pins: usb30 {
|
||||
groups = "usb30", "usb30_id";
|
||||
function = "usb30";
|
||||
};
|
||||
};
|
||||
|
||||
&rcar_sound {
|
||||
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/* Single DAI */
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
/* audio_clkout0/1/2/3 */
|
||||
#clock-cells = <1>;
|
||||
clock-frequency = <11289600>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
rcar_sound,dai {
|
||||
dai0 {
|
||||
playback = <&ssi0>, <&src0>, <&dvc0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif2 {
|
||||
pinctrl-0 = <&scif2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-1 = <&sdhi0_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
vqmmc-supply = <&vccq_sdhi0>;
|
||||
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
|
||||
bus-width = <4>;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi3 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdhi3_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&wlan_en_reg>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
cap-power-off-card;
|
||||
keep-power-in-suspend;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
wlcore: wlcore@2 {
|
||||
compatible = "ti,wl1837";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
renesas,no-otg-pins;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_peri0 {
|
||||
companion = <&xhci0>;
|
||||
status = "okay";
|
||||
usb-role-switch;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
usb3_hs_ep: endpoint {
|
||||
remote-endpoint = <&hs_ep>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
usb3_role_switch: endpoint {
|
||||
remote-endpoint = <&hd3ss3220_out_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&xhci0 {
|
||||
pinctrl-0 = <&usb30_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
@@ -1,14 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874)
|
||||
*
|
||||
* Copyright (C) 2019 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
#include "r8a774c0-cat874.dts"
|
||||
#include "cat875.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875)";
|
||||
compatible = "si-linux,cat875", "si-linux,cat874", "renesas,r8a774c0";
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,61 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright 2020, Compass Electronics Group, LLC
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "r8a774e1.dtsi"
|
||||
#include "beacon-renesom-som.dtsi"
|
||||
#include "beacon-renesom-baseboard.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Beacon Embedded Works RZ/G2H Development Kit";
|
||||
compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
i2c5 = &i2c5;
|
||||
i2c6 = &i2c6;
|
||||
i2c7 = &iic_pmic;
|
||||
serial0 = &scif2;
|
||||
serial1 = &hscif0;
|
||||
serial2 = &hscif1;
|
||||
serial3 = &scif0;
|
||||
serial4 = &hscif2;
|
||||
serial5 = &scif5;
|
||||
serial6 = &scif4;
|
||||
ethernet0 = &avb;
|
||||
mmc0 = &sdhi3;
|
||||
mmc1 = &sdhi0;
|
||||
mmc2 = &sdhi2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@500000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x5 0x00000000 0x0 0x80000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 721>,
|
||||
<&versaclock5 1>,
|
||||
<&x302_clk>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.3",
|
||||
"dclkin.0", "dclkin.1", "dclkin.3";
|
||||
};
|
||||
@@ -1,20 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the HiHope RZ/G2H sub board
|
||||
*
|
||||
* Copyright (C) 2020 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
#include "r8a774e1-hihope-rzg2h.dts"
|
||||
#include "hihope-rzg2-ex.dtsi"
|
||||
|
||||
/ {
|
||||
model = "HopeRun HiHope RZ/G2H with sub board";
|
||||
compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2h",
|
||||
"renesas,r8a774e1";
|
||||
};
|
||||
|
||||
/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -1,41 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the HiHope RZ/G2H main board
|
||||
*
|
||||
* Copyright (C) 2020 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a774e1.dtsi"
|
||||
#include "hihope-rev4.dtsi"
|
||||
|
||||
/ {
|
||||
model = "HopeRun HiHope RZ/G2H main board based on r8a774e1";
|
||||
compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1";
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
|
||||
memory@500000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x5 0x00000000 0x0 0x80000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 721>,
|
||||
<&versaclock5 1>,
|
||||
<&x302_clk>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.3",
|
||||
"dclkin.0", "dclkin.1", "dclkin.3";
|
||||
};
|
||||
|
||||
&sdhi3 {
|
||||
mmc-hs400-1_8v;
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,947 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Lager board
|
||||
*
|
||||
* Copyright (C) 2013-2014 Renesas Solutions Corp.
|
||||
* Copyright (C) 2014 Cogent Embedded, Inc.
|
||||
* Copyright (C) 2015-2016 Renesas Electronics Corporation
|
||||
*/
|
||||
|
||||
/*
|
||||
* SSI-AK4643
|
||||
*
|
||||
* SW1: 1: AK4643
|
||||
* 2: CN22
|
||||
* 3: ADV7511
|
||||
*
|
||||
* This command is required when Playback/Capture
|
||||
*
|
||||
* amixer set "LINEOUT Mixer DACL" on
|
||||
* amixer set "DVC Out" 100%
|
||||
* amixer set "DVC In" 100%
|
||||
*
|
||||
* You can use Mute
|
||||
*
|
||||
* amixer set "DVC Out Mute" on
|
||||
* amixer set "DVC In Mute" on
|
||||
*
|
||||
* You can use Volume Ramp
|
||||
*
|
||||
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
|
||||
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
|
||||
* amixer set "DVC Out Ramp" on
|
||||
* aplay xxx.wav &
|
||||
* amixer set "DVC Out" 80% // Volume Down
|
||||
* amixer set "DVC Out" 100% // Volume Up
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a7790.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Lager";
|
||||
compatible = "renesas,lager", "renesas,r8a7790";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif0;
|
||||
serial1 = &scifa1;
|
||||
i2c8 = &gpioi2c1;
|
||||
i2c9 = &gpioi2c2;
|
||||
i2c10 = &i2cexio0;
|
||||
i2c11 = &i2cexio1;
|
||||
i2c12 = &i2chdmi;
|
||||
i2c13 = &i2cpwr;
|
||||
mmc0 = &mmcif1;
|
||||
mmc1 = &sdhi0;
|
||||
mmc2 = &sdhi2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
memory@140000000 {
|
||||
device_type = "memory";
|
||||
reg = <1 0x40000000 0 0xc0000000>;
|
||||
};
|
||||
|
||||
lbsc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
keyboard {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&keyboard_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
one {
|
||||
linux,code = <KEY_1>;
|
||||
label = "SW2-1";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
two {
|
||||
linux,code = <KEY_2>;
|
||||
label = "SW2-2";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
three {
|
||||
linux,code = <KEY_3>;
|
||||
label = "SW2-3";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
four {
|
||||
linux,code = <KEY_4>;
|
||||
label = "SW2-4";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led6 {
|
||||
gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
led7 {
|
||||
gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
led8 {
|
||||
gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
fixedregulator3v3: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI0 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi2: regulator-vcc-sdhi2 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI2 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi2: regulator-vccq-sdhi2 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI2 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
audio_clock: audio_clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <11289600>;
|
||||
};
|
||||
|
||||
rsnd_ak4643: sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,format = "left_j";
|
||||
simple-audio-card,bitclock-master = <&sndcodec>;
|
||||
simple-audio-card,frame-master = <&sndcodec>;
|
||||
|
||||
sndcpu: simple-audio-card,cpu {
|
||||
sound-dai = <&rcar_sound>;
|
||||
};
|
||||
|
||||
sndcodec: simple-audio-card,codec {
|
||||
sound-dai = <&ak4643>;
|
||||
clocks = <&audio_clock>;
|
||||
};
|
||||
};
|
||||
|
||||
vga-encoder {
|
||||
compatible = "adi,adv7123";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7123_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7123_out: endpoint {
|
||||
remote-endpoint = <&vga_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga {
|
||||
compatible = "vga-connector";
|
||||
|
||||
port {
|
||||
vga_in: endpoint {
|
||||
remote-endpoint = <&adv7123_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-in {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&adv7612_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cec_clock: cec-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_out: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x2_clk: x2-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
x13_clk: x13-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
gpioi2c1: i2c-8 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
gpioi2c2: i2c-9 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
/*
|
||||
* IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
|
||||
* We use the I2C demuxer, so the desired IP core can be selected at runtime
|
||||
* depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
|
||||
* Note: For testing the I2C slave feature, it is convenient to connect this
|
||||
* bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
|
||||
* instantiate the slave device at runtime according to the documentation.
|
||||
* You can then communicate with the slave via IIC3.
|
||||
*
|
||||
* IIC0/I2C0 does not appear to support fallback to GPIO.
|
||||
*/
|
||||
i2cexio0: i2c-10 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&iic0>, <&i2c0>;
|
||||
i2c-bus-name = "i2c-exio0";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
/*
|
||||
* IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
|
||||
* This is similar to the arangement described for i2cexio0 (above)
|
||||
* with a fallback to GPIO also provided.
|
||||
*/
|
||||
i2cexio1: i2c-11 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
|
||||
i2c-bus-name = "i2c-exio1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
/*
|
||||
* IIC2 and I2C2 may be switched using pinmux.
|
||||
* A fallback to GPIO is also provided.
|
||||
*/
|
||||
i2chdmi: i2c-12 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
|
||||
i2c-bus-name = "i2c-hdmi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ak4643: codec@12 {
|
||||
compatible = "asahi-kasei,ak4643";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x12>;
|
||||
};
|
||||
|
||||
composite-in@20 {
|
||||
compatible = "adi,adv7180";
|
||||
reg = <0x20>;
|
||||
|
||||
port {
|
||||
adv7180: endpoint {
|
||||
bus-width = <8>;
|
||||
remote-endpoint = <&vin1ep0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
|
||||
clocks = <&cec_clock>;
|
||||
clock-names = "cec";
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-in@4c {
|
||||
compatible = "adi,adv7612";
|
||||
reg = <0x4c>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
|
||||
default-input = <0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7612_in: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
adv7612_out: endpoint {
|
||||
remote-endpoint = <&vin0ep2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* IIC3 and I2C3 may be switched using pinmux.
|
||||
* IIC3/I2C3 does not appear to support fallback to GPIO.
|
||||
*/
|
||||
i2cpwr: i2c-13 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_irq_pins>;
|
||||
i2c-parent = <&iic3>, <&i2c3>;
|
||||
i2c-bus-name = "i2c-pwr";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmic@58 {
|
||||
compatible = "dlg,da9063";
|
||||
reg = <0x58>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
|
||||
rtc {
|
||||
compatible = "dlg,da9063-rtc";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "dlg,da9063-watchdog";
|
||||
};
|
||||
};
|
||||
|
||||
vdd_dvfs: regulator@68 {
|
||||
compatible = "dlg,da9210";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
|
||||
<&x13_clk>, <&x2_clk>;
|
||||
clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7123_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lvds0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lvds1 {
|
||||
ports {
|
||||
port@1 {
|
||||
lvds_connector: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
du_pins: du {
|
||||
groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
|
||||
function = "du";
|
||||
};
|
||||
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data";
|
||||
function = "scif0";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
|
||||
ether_pins: ether {
|
||||
groups = "eth_link", "eth_mdio", "eth_rmii";
|
||||
function = "eth";
|
||||
};
|
||||
|
||||
phy1_pins: phy1 {
|
||||
groups = "intc_irq0";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
scifa1_pins: scifa1 {
|
||||
groups = "scifa1_data";
|
||||
function = "scifa1";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi0_pins_uhs: sd0_uhs {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi2_pins: sd2 {
|
||||
groups = "sdhi2_data4", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi2_pins_uhs: sd2_uhs {
|
||||
groups = "sdhi2_data4", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
mmc1_pins: mmc1 {
|
||||
groups = "mmc1_data8", "mmc1_ctrl";
|
||||
function = "mmc1";
|
||||
};
|
||||
|
||||
qspi_pins: qspi {
|
||||
groups = "qspi_ctrl", "qspi_data4";
|
||||
function = "qspi";
|
||||
};
|
||||
|
||||
msiof1_pins: msiof1 {
|
||||
groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
|
||||
"msiof1_tx";
|
||||
function = "msiof1";
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0 {
|
||||
groups = "i2c0";
|
||||
function = "i2c0";
|
||||
};
|
||||
|
||||
iic0_pins: iic0 {
|
||||
groups = "iic0";
|
||||
function = "iic0";
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
groups = "i2c1";
|
||||
function = "i2c1";
|
||||
};
|
||||
|
||||
iic1_pins: iic1 {
|
||||
groups = "iic1";
|
||||
function = "iic1";
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2 {
|
||||
groups = "i2c2";
|
||||
function = "i2c2";
|
||||
};
|
||||
|
||||
iic2_pins: iic2 {
|
||||
groups = "iic2";
|
||||
function = "iic2";
|
||||
};
|
||||
|
||||
i2c3_pins: i2c3 {
|
||||
groups = "i2c3";
|
||||
function = "i2c3";
|
||||
};
|
||||
|
||||
iic3_pins: iic3 {
|
||||
groups = "iic3";
|
||||
function = "iic3";
|
||||
};
|
||||
|
||||
pmic_irq_pins: pmicirq {
|
||||
groups = "intc_irq2";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
hsusb_pins: hsusb {
|
||||
groups = "usb0_ovc_vbus";
|
||||
function = "usb0";
|
||||
};
|
||||
|
||||
usb0_pins: usb0 {
|
||||
groups = "usb0";
|
||||
function = "usb0";
|
||||
};
|
||||
|
||||
usb1_pins: usb1 {
|
||||
groups = "usb1";
|
||||
function = "usb1";
|
||||
};
|
||||
|
||||
usb2_pins: usb2 {
|
||||
groups = "usb2";
|
||||
function = "usb2";
|
||||
};
|
||||
|
||||
vin0_pins: vin0 {
|
||||
groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
|
||||
function = "vin0";
|
||||
};
|
||||
|
||||
vin1_pins: vin1 {
|
||||
groups = "vin1_data8", "vin1_clk";
|
||||
function = "vin1";
|
||||
};
|
||||
|
||||
sound_pins: sound {
|
||||
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
|
||||
function = "ssi";
|
||||
};
|
||||
|
||||
sound_clk_pins: sound_clk {
|
||||
groups = "audio_clk_a";
|
||||
function = "audio_clk";
|
||||
};
|
||||
|
||||
keyboard_pins: keyboard {
|
||||
pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
ðer {
|
||||
pinctrl-0 = <ðer_pins>, <&phy1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
renesas,ether-link-active-low;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-id0022.1537",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
micrel,led-mode = <1>;
|
||||
reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&cmt0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmcif1 {
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&fixedregulator3v3>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-0 = <&qspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash: flash@0 {
|
||||
compatible = "spansion,s25fl512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <30000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "loader";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@40000 {
|
||||
label = "user";
|
||||
reg = <0x00040000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
partition@440000 {
|
||||
label = "flash";
|
||||
reg = <0x00440000 0x03bc0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scifa1 {
|
||||
pinctrl-0 = <&scifa1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
&msiof1 {
|
||||
pinctrl-0 = <&msiof1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
pmic: pmic@0 {
|
||||
compatible = "renesas,r2a11302ft";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <6000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-1 = <&sdhi0_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
vqmmc-supply = <&vccq_sdhi0>;
|
||||
cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi2 {
|
||||
pinctrl-0 = <&sdhi2_pins>;
|
||||
pinctrl-1 = <&sdhi2_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi2>;
|
||||
vqmmc-supply = <&vccq_sdhi2>;
|
||||
cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&vdd_dvfs>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "i2c-exio0";
|
||||
};
|
||||
|
||||
&iic0 {
|
||||
pinctrl-0 = <&iic0_pins>;
|
||||
pinctrl-names = "i2c-exio0";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "i2c-exio1";
|
||||
};
|
||||
|
||||
&iic1 {
|
||||
pinctrl-0 = <&iic1_pins>;
|
||||
pinctrl-names = "i2c-exio1";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
pinctrl-names = "i2c-hdmi";
|
||||
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&iic2 {
|
||||
pinctrl-0 = <&iic2_pins>;
|
||||
pinctrl-names = "i2c-hdmi";
|
||||
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
pinctrl-names = "i2c-pwr";
|
||||
};
|
||||
|
||||
&iic3 {
|
||||
pinctrl-0 = <&iic3_pins>;
|
||||
pinctrl-names = "i2c-pwr";
|
||||
};
|
||||
|
||||
&pci0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pci1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb2_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pci2 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb2_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&hsusb {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hsusb_pins>;
|
||||
pinctrl-names = "default";
|
||||
renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* HDMI video input */
|
||||
&vin0 {
|
||||
pinctrl-0 = <&vin0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
vin0ep2: endpoint {
|
||||
remote-endpoint = <&adv7612_out>;
|
||||
bus-width = <24>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
pclk-sample = <1>;
|
||||
data-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* composite video input */
|
||||
&vin1 {
|
||||
pinctrl-0 = <&vin1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
vin1ep0: endpoint {
|
||||
remote-endpoint = <&adv7180>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rcar_sound {
|
||||
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/* Single DAI */
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
rcar_sound,dai {
|
||||
dai0 {
|
||||
playback = <&ssi0>, <&src2>, <&dvc0>;
|
||||
capture = <&ssi1>, <&src3>, <&dvc1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
shared-pin;
|
||||
};
|
||||
@@ -1,382 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Stout board
|
||||
*
|
||||
* Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a7790.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Stout";
|
||||
compatible = "renesas,stout", "renesas,r8a7790";
|
||||
|
||||
aliases {
|
||||
serial0 = &scifa0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led1 {
|
||||
gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
led2 {
|
||||
gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
led3 {
|
||||
gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
led5 {
|
||||
gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
fixedregulator3v3: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_out: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
osc1_clk: osc1-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
osc4_clk: osc4-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
|
||||
<&osc1_clk>;
|
||||
clock-names = "du.0", "du.1", "du.2", "dclkin.0";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lvds0 {
|
||||
ports {
|
||||
port@1 {
|
||||
lvds_connector0: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lvds1 {
|
||||
ports {
|
||||
port@1 {
|
||||
lvds_connector1: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
du_pins: du {
|
||||
groups = "du_rgb888", "du_sync_1", "du_clk_out_0";
|
||||
function = "du";
|
||||
};
|
||||
|
||||
scifa0_pins: scifa0 {
|
||||
groups = "scifa0_data_b";
|
||||
function = "scifa0";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
|
||||
ether_pins: ether {
|
||||
groups = "eth_link", "eth_mdio", "eth_rmii";
|
||||
function = "eth";
|
||||
};
|
||||
|
||||
phy1_pins: phy1 {
|
||||
groups = "intc_irq1";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
qspi_pins: qspi {
|
||||
groups = "qspi_ctrl", "qspi_data4";
|
||||
function = "qspi";
|
||||
};
|
||||
|
||||
iic2_pins: iic2 {
|
||||
groups = "iic2_b";
|
||||
function = "iic2";
|
||||
};
|
||||
|
||||
iic3_pins: iic3 {
|
||||
groups = "iic3";
|
||||
function = "iic3";
|
||||
};
|
||||
|
||||
pmic_irq_pins: pmicirq {
|
||||
groups = "intc_irq2";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
usb0_pins: usb0 {
|
||||
groups = "usb0";
|
||||
function = "usb0";
|
||||
};
|
||||
};
|
||||
|
||||
ðer {
|
||||
pinctrl-0 = <ðer_pins>, <&phy1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
renesas,ether-link-active-low;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-id0022.1537",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
||||
micrel,led-mode = <1>;
|
||||
reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&cmt0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-0 = <&qspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash: flash@0 {
|
||||
compatible = "spansion,s25fl512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <30000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "loader";
|
||||
reg = <0x00000000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
partition@80000 {
|
||||
label = "uboot";
|
||||
reg = <0x00080000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@c0000 {
|
||||
label = "uboot-env";
|
||||
reg = <0x000c0000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@100000 {
|
||||
label = "flash";
|
||||
reg = <0x00100000 0x03f00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&scifa0 {
|
||||
pinctrl-0 = <&scifa0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&vdd_dvfs>;
|
||||
};
|
||||
|
||||
&iic2 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&iic2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
clock-frequency = <100000>;
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
|
||||
clocks = <&osc4_clk>;
|
||||
clock-names = "cec";
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&iic3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&iic3_pins>, <&pmic_irq_pins>;
|
||||
status = "okay";
|
||||
|
||||
pmic@58 {
|
||||
compatible = "dlg,da9063";
|
||||
reg = <0x58>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
|
||||
onkey {
|
||||
compatible = "dlg,da9063-onkey";
|
||||
};
|
||||
|
||||
rtc {
|
||||
compatible = "dlg,da9063-rtc";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "dlg,da9063-watchdog";
|
||||
};
|
||||
};
|
||||
|
||||
vdd_dvfs: regulator@68 {
|
||||
compatible = "dlg,da9210";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd: regulator@70 {
|
||||
compatible = "dlg,da9210";
|
||||
reg = <0x70>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&pci0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,912 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Koelsch board
|
||||
*
|
||||
* Copyright (C) 2013 Renesas Electronics Corporation
|
||||
* Copyright (C) 2013-2014 Renesas Solutions Corp.
|
||||
* Copyright (C) 2014 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SSI-AK4643
|
||||
*
|
||||
* SW1: 1: AK4643
|
||||
* 2: CN22
|
||||
* 3: ADV7511
|
||||
*
|
||||
* This command is required when Playback/Capture
|
||||
*
|
||||
* amixer set "LINEOUT Mixer DACL" on
|
||||
* amixer set "DVC Out" 100%
|
||||
* amixer set "DVC In" 100%
|
||||
*
|
||||
* You can use Mute
|
||||
*
|
||||
* amixer set "DVC Out Mute" on
|
||||
* amixer set "DVC In Mute" on
|
||||
*
|
||||
* You can use Volume Ramp
|
||||
*
|
||||
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
|
||||
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
|
||||
* amixer set "DVC Out Ramp" on
|
||||
* aplay xxx.wav &
|
||||
* amixer set "DVC Out" 80% // Volume Down
|
||||
* amixer set "DVC Out" 100% // Volume Up
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a7791.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Koelsch";
|
||||
compatible = "renesas,koelsch", "renesas,r8a7791";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif0;
|
||||
serial1 = &scif1;
|
||||
i2c9 = &gpioi2c1;
|
||||
i2c10 = &gpioi2c2;
|
||||
i2c11 = &gpioi2c4;
|
||||
i2c12 = &i2cexio1;
|
||||
i2c13 = &i2chdmi;
|
||||
i2c14 = &i2cexio4;
|
||||
mmc0 = &sdhi0;
|
||||
mmc1 = &sdhi1;
|
||||
mmc2 = &sdhi2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
memory@200000000 {
|
||||
device_type = "memory";
|
||||
reg = <2 0x00000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
lbsc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
keyboard {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&keyboard_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-1 {
|
||||
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_1>;
|
||||
label = "SW2-1";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-2 {
|
||||
gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_2>;
|
||||
label = "SW2-2";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-3 {
|
||||
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_3>;
|
||||
label = "SW2-3";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-4 {
|
||||
gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_4>;
|
||||
label = "SW2-4";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-a {
|
||||
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_A>;
|
||||
label = "SW30";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-b {
|
||||
gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_B>;
|
||||
label = "SW31";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-c {
|
||||
gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_C>;
|
||||
label = "SW32";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-d {
|
||||
gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_D>;
|
||||
label = "SW33";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-e {
|
||||
gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_E>;
|
||||
label = "SW34";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-f {
|
||||
gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_F>;
|
||||
label = "SW35";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-g {
|
||||
gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_G>;
|
||||
label = "SW36";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led6 {
|
||||
gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED6";
|
||||
};
|
||||
led7 {
|
||||
gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED7";
|
||||
};
|
||||
led8 {
|
||||
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED8";
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI0 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi1: regulator-vcc-sdhi1 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI1 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi1: regulator-vccq-sdhi1 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI1 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi2: regulator-vcc-sdhi2 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI2 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi2: regulator-vccq-sdhi2 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI2 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
audio_clock: audio_clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <11289600>;
|
||||
};
|
||||
|
||||
rsnd_ak4643: sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,format = "left_j";
|
||||
simple-audio-card,bitclock-master = <&sndcodec>;
|
||||
simple-audio-card,frame-master = <&sndcodec>;
|
||||
|
||||
sndcpu: simple-audio-card,cpu {
|
||||
sound-dai = <&rcar_sound>;
|
||||
};
|
||||
|
||||
sndcodec: simple-audio-card,codec {
|
||||
sound-dai = <&ak4643>;
|
||||
clocks = <&audio_clock>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-in {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&adv7612_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cec_clock: cec-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_out: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x2_clk: x2-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
x13_clk: x13-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
gpioi2c1: i2c-9 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
gpioi2c2: i2c-10 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
gpioi2c4: i2c-11 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
/*
|
||||
* I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
|
||||
* A fallback to GPIO is provided.
|
||||
*/
|
||||
i2cexio1: i2c-12 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c1>, <&gpioi2c1>;
|
||||
i2c-bus-name = "i2c-exio1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
/*
|
||||
* A fallback to GPIO is provided for I2C2.
|
||||
*/
|
||||
i2chdmi: i2c-13 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c2>, <&gpioi2c2>;
|
||||
i2c-bus-name = "i2c-hdmi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ak4643: codec@12 {
|
||||
compatible = "asahi-kasei,ak4643";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x12>;
|
||||
};
|
||||
|
||||
composite-in@20 {
|
||||
compatible = "adi,adv7180";
|
||||
reg = <0x20>;
|
||||
|
||||
port {
|
||||
adv7180: endpoint {
|
||||
bus-width = <8>;
|
||||
remote-endpoint = <&vin1ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
clocks = <&cec_clock>;
|
||||
clock-names = "cec";
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-in@4c {
|
||||
compatible = "adi,adv7612";
|
||||
reg = <0x4c>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
default-input = <0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7612_in: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
adv7612_out: endpoint {
|
||||
remote-endpoint = <&vin0ep2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "renesas,r1ex24002", "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
|
||||
* A fallback to GPIO is provided.
|
||||
*/
|
||||
i2cexio4: i2c-14 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c4>, <&gpioi2c4>;
|
||||
i2c-bus-name = "i2c-exio4";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
|
||||
<&x13_clk>, <&x2_clk>;
|
||||
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lvds0 {
|
||||
ports {
|
||||
port@1 {
|
||||
lvds_connector: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
groups = "i2c1";
|
||||
function = "i2c1";
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2 {
|
||||
groups = "i2c2";
|
||||
function = "i2c2";
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4 {
|
||||
groups = "i2c4_c";
|
||||
function = "i2c4";
|
||||
};
|
||||
|
||||
du_pins: du {
|
||||
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
|
||||
function = "du";
|
||||
};
|
||||
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data_d";
|
||||
function = "scif0";
|
||||
};
|
||||
|
||||
scif1_pins: scif1 {
|
||||
groups = "scif1_data_d";
|
||||
function = "scif1";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
|
||||
ether_pins: ether {
|
||||
groups = "eth_link", "eth_mdio", "eth_rmii";
|
||||
function = "eth";
|
||||
};
|
||||
|
||||
phy1_pins: phy1 {
|
||||
groups = "intc_irq0";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
pmic_irq_pins: pmicirq {
|
||||
groups = "intc_irq2";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi0_pins_uhs: sd0_uhs {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi1_pins: sd1 {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi1_pins_uhs: sd1_uhs {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi2_pins: sd2 {
|
||||
groups = "sdhi2_data4", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi2_pins_uhs: sd2_uhs {
|
||||
groups = "sdhi2_data4", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
qspi_pins: qspi {
|
||||
groups = "qspi_ctrl", "qspi_data4";
|
||||
function = "qspi";
|
||||
};
|
||||
|
||||
msiof0_pins: msiof0 {
|
||||
groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
|
||||
"msiof0_tx";
|
||||
function = "msiof0";
|
||||
};
|
||||
|
||||
usb0_pins: usb0 {
|
||||
groups = "usb0";
|
||||
function = "usb0";
|
||||
};
|
||||
|
||||
usb1_pins: usb1 {
|
||||
groups = "usb1";
|
||||
function = "usb1";
|
||||
};
|
||||
|
||||
vin0_pins: vin0 {
|
||||
groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
|
||||
function = "vin0";
|
||||
};
|
||||
|
||||
vin1_pins: vin1 {
|
||||
groups = "vin1_data8", "vin1_clk";
|
||||
function = "vin1";
|
||||
};
|
||||
|
||||
sound_pins: sound {
|
||||
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
|
||||
function = "ssi";
|
||||
};
|
||||
|
||||
sound_clk_pins: sound_clk {
|
||||
groups = "audio_clk_a";
|
||||
function = "audio_clk";
|
||||
};
|
||||
|
||||
keyboard_pins: keyboard {
|
||||
pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
ðer {
|
||||
pinctrl-0 = <ðer_pins>, <&phy1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
renesas,ether-link-active-low;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-id0022.1537",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
micrel,led-mode = <1>;
|
||||
reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&cmt0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif1 {
|
||||
pinctrl-0 = <&scif1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-1 = <&sdhi0_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
vqmmc-supply = <&vccq_sdhi0>;
|
||||
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi1 {
|
||||
pinctrl-0 = <&sdhi1_pins>;
|
||||
pinctrl-1 = <&sdhi1_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi1>;
|
||||
vqmmc-supply = <&vccq_sdhi1>;
|
||||
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi2 {
|
||||
pinctrl-0 = <&sdhi2_pins>;
|
||||
pinctrl-1 = <&sdhi2_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi2>;
|
||||
vqmmc-supply = <&vccq_sdhi2>;
|
||||
cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-0 = <&qspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash: flash@0 {
|
||||
compatible = "spansion,s25fl512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <30000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "loader";
|
||||
reg = <0x00000000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
partition@80000 {
|
||||
label = "user";
|
||||
reg = <0x00080000 0x00580000>;
|
||||
read-only;
|
||||
};
|
||||
partition@600000 {
|
||||
label = "flash";
|
||||
reg = <0x00600000 0x03a00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&msiof0 {
|
||||
pinctrl-0 = <&msiof0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
pmic: pmic@0 {
|
||||
compatible = "renesas,r2a11302ft";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <6000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "i2c-exio1";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
pinctrl-names = "i2c-hdmi";
|
||||
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "i2c-exio4";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_irq_pins>;
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pmic@58 {
|
||||
compatible = "dlg,da9063";
|
||||
reg = <0x58>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
|
||||
rtc {
|
||||
compatible = "dlg,da9063-rtc";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "dlg,da9063-watchdog";
|
||||
};
|
||||
};
|
||||
|
||||
vdd_dvfs: regulator@68 {
|
||||
compatible = "dlg,da9210";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&pci0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pci1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&hsusb {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_bus_clk {
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
|
||||
&pciec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&vdd_dvfs>;
|
||||
};
|
||||
|
||||
/* HDMI video input */
|
||||
&vin0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&vin0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
port {
|
||||
vin0ep2: endpoint {
|
||||
remote-endpoint = <&adv7612_out>;
|
||||
bus-width = <24>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
pclk-sample = <1>;
|
||||
data-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* composite video input */
|
||||
&vin1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&vin1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
port {
|
||||
vin1ep: endpoint {
|
||||
remote-endpoint = <&adv7180>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rcar_sound {
|
||||
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/* Single DAI */
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
rcar_sound,dai {
|
||||
dai0 {
|
||||
playback = <&ssi0>, <&src2>, <&dvc0>;
|
||||
capture = <&ssi1>, <&src3>, <&dvc1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
shared-pin;
|
||||
};
|
||||
@@ -1,523 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Porter board
|
||||
*
|
||||
* Copyright (C) 2015 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SSI-AK4642
|
||||
*
|
||||
* JP3: 2-1: AK4642
|
||||
* 2-3: ADV7511
|
||||
*
|
||||
* This command is required before playback/capture:
|
||||
*
|
||||
* amixer set "LINEOUT Mixer DACL" on
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a7791.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Porter";
|
||||
compatible = "renesas,porter", "renesas,r8a7791";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif0;
|
||||
i2c9 = &gpioi2c2;
|
||||
i2c10 = &i2chdmi;
|
||||
mmc0 = &sdhi0;
|
||||
mmc1 = &sdhi2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
memory@200000000 {
|
||||
device_type = "memory";
|
||||
reg = <2 0x00000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI0 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi2: regulator-vcc-sdhi2 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI2 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vccq_sdhi2: regulator-vccq-sdhi2 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI2 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x3_clk: x3-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
x16_clk: x16-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
x14_clk: audio_clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <11289600>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,format = "left_j";
|
||||
simple-audio-card,bitclock-master = <&soundcodec>;
|
||||
simple-audio-card,frame-master = <&soundcodec>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&rcar_sound>;
|
||||
};
|
||||
|
||||
soundcodec: simple-audio-card,codec {
|
||||
sound-dai = <&ak4642>;
|
||||
clocks = <&x14_clk>;
|
||||
};
|
||||
};
|
||||
|
||||
gpioi2c2: i2c-9 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
/*
|
||||
* A fallback to GPIO is provided for I2C2.
|
||||
*/
|
||||
i2chdmi: i2c-10 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c2>, <&gpioi2c2>;
|
||||
i2c-bus-name = "i2c-hdmi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ak4642: codec@12 {
|
||||
compatible = "asahi-kasei,ak4642";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x12>;
|
||||
};
|
||||
|
||||
composite-in@20 {
|
||||
compatible = "adi,adv7180";
|
||||
reg = <0x20>;
|
||||
|
||||
port {
|
||||
adv7180: endpoint {
|
||||
bus-width = <8>;
|
||||
remote-endpoint = <&vin0ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data_d";
|
||||
function = "scif0";
|
||||
};
|
||||
|
||||
ether_pins: ether {
|
||||
groups = "eth_link", "eth_mdio", "eth_rmii";
|
||||
function = "eth";
|
||||
};
|
||||
|
||||
phy1_pins: phy1 {
|
||||
groups = "intc_irq0";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
pmic_irq_pins: pmicirq {
|
||||
groups = "intc_irq2";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
};
|
||||
|
||||
sdhi2_pins: sd2 {
|
||||
groups = "sdhi2_data4", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
};
|
||||
|
||||
qspi_pins: qspi {
|
||||
groups = "qspi_ctrl", "qspi_data4";
|
||||
function = "qspi";
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2 {
|
||||
groups = "i2c2";
|
||||
function = "i2c2";
|
||||
};
|
||||
|
||||
usb0_pins: usb0 {
|
||||
groups = "usb0";
|
||||
function = "usb0";
|
||||
};
|
||||
|
||||
usb1_pins: usb1 {
|
||||
groups = "usb1";
|
||||
function = "usb1";
|
||||
};
|
||||
|
||||
vin0_pins: vin0 {
|
||||
groups = "vin0_data8", "vin0_clk";
|
||||
function = "vin0";
|
||||
};
|
||||
|
||||
can0_pins: can0 {
|
||||
groups = "can0_data";
|
||||
function = "can0";
|
||||
};
|
||||
|
||||
du_pins: du {
|
||||
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
|
||||
function = "du";
|
||||
};
|
||||
|
||||
ssi_pins: sound {
|
||||
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
|
||||
function = "ssi";
|
||||
};
|
||||
|
||||
audio_clk_pins: audio_clk {
|
||||
groups = "audio_clk_a";
|
||||
function = "audio_clk";
|
||||
};
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðer {
|
||||
pinctrl-0 = <ðer_pins>, <&phy1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
renesas,ether-link-active-low;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-id0022.1537",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
micrel,led-mode = <1>;
|
||||
reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
vqmmc-supply = <&vccq_sdhi0>;
|
||||
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi2 {
|
||||
pinctrl-0 = <&sdhi2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi2>;
|
||||
vqmmc-supply = <&vccq_sdhi2>;
|
||||
cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-0 = <&qspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fl512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <30000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "loader_prg";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@40000 {
|
||||
label = "user_prg";
|
||||
reg = <0x00040000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
partition@440000 {
|
||||
label = "flash_fs";
|
||||
reg = <0x00440000 0x03bc0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
pinctrl-names = "i2c-hdmi";
|
||||
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_irq_pins>;
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pmic@5a {
|
||||
compatible = "dlg,da9063l";
|
||||
reg = <0x5a>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
|
||||
watchdog {
|
||||
compatible = "dlg,da9063-watchdog";
|
||||
};
|
||||
};
|
||||
|
||||
vdd_dvfs: regulator@68 {
|
||||
compatible = "dlg,da9210";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&sata0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&vdd_dvfs>;
|
||||
};
|
||||
|
||||
/* composite video input */
|
||||
&vin0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&vin0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
port {
|
||||
vin0ep: endpoint {
|
||||
remote-endpoint = <&adv7180>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pci0 {
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pci1 {
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hsusb {
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_bus_clk {
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
|
||||
&pciec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can0 {
|
||||
pinctrl-0 = <&can0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
|
||||
<&x3_clk>, <&x16_clk>;
|
||||
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lvds0 {
|
||||
ports {
|
||||
port@1 {
|
||||
lvds_connector: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rcar_sound {
|
||||
pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
/* Single DAI */
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
rcar_sound,dai {
|
||||
dai0 {
|
||||
playback = <&ssi0>;
|
||||
capture = <&ssi1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
shared-pin;
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,364 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Blanche board
|
||||
*
|
||||
* Copyright (C) 2014 Renesas Electronics Corporation
|
||||
* Copyright (C) 2016 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a7792.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Blanche";
|
||||
compatible = "renesas,blanche", "renesas,r8a7792";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif0;
|
||||
serial1 = &scif3;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
d3_3v: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "D3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ethernet@18000000 {
|
||||
compatible = "smsc,lan89218", "smsc,lan9115";
|
||||
reg = <0 0x18000000 0 0x100>;
|
||||
phy-mode = "mii";
|
||||
interrupt-parent = <&irqc>;
|
||||
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
|
||||
smsc,irq-push-pull;
|
||||
reg-io-width = <4>;
|
||||
vddvario-supply = <&d3_3v>;
|
||||
vdd33a-supply = <&d3_3v>;
|
||||
|
||||
pinctrl-0 = <&lan89218_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
vga-encoder {
|
||||
compatible = "adi,adv7123";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7123_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb1>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7123_out: endpoint {
|
||||
remote-endpoint = <&vga_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga {
|
||||
compatible = "vga-connector";
|
||||
|
||||
port {
|
||||
vga_in: endpoint {
|
||||
remote-endpoint = <&adv7123_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x1_clk: x1 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
x2_clk: x2 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <65000000>;
|
||||
};
|
||||
|
||||
keyboard {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&keyboard_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-1 {
|
||||
linux,code = <KEY_1>;
|
||||
label = "SW2-1";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
key-2 {
|
||||
linux,code = <KEY_2>;
|
||||
label = "SW2-2";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
key-3 {
|
||||
linux,code = <KEY_3>;
|
||||
label = "SW2-3";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
key-4 {
|
||||
linux,code = <KEY_4>;
|
||||
label = "SW2-4";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
key-a {
|
||||
linux,code = <KEY_A>;
|
||||
label = "SW24";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
key-b {
|
||||
linux,code = <KEY_B>;
|
||||
label = "SW25";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led17 {
|
||||
gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
led18 {
|
||||
gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
led19 {
|
||||
gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
led20 {
|
||||
gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&can_clk {
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data";
|
||||
function = "scif0";
|
||||
};
|
||||
|
||||
scif3_pins: scif3 {
|
||||
groups = "scif3_data";
|
||||
function = "scif3";
|
||||
};
|
||||
|
||||
lan89218_pins: lan89218 {
|
||||
intc {
|
||||
groups = "intc_irq0";
|
||||
function = "intc";
|
||||
};
|
||||
lbsc {
|
||||
groups = "lbsc_ex_cs0";
|
||||
function = "lbsc";
|
||||
};
|
||||
};
|
||||
|
||||
can0_pins: can0 {
|
||||
groups = "can0_data", "can_clk";
|
||||
function = "can0";
|
||||
};
|
||||
|
||||
sdhi0_pins: sdhi0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
};
|
||||
|
||||
du0_pins: du0 {
|
||||
groups = "du0_rgb888", "du0_sync", "du0_disp";
|
||||
function = "du0";
|
||||
};
|
||||
|
||||
du1_pins: du1 {
|
||||
groups = "du1_rgb666", "du1_sync", "du1_disp";
|
||||
function = "du1";
|
||||
};
|
||||
|
||||
keyboard_pins: keyboard {
|
||||
pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pmic_irq_pins: pmicirq {
|
||||
groups = "intc_irq2";
|
||||
function = "intc";
|
||||
};
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif3 {
|
||||
pinctrl-0 = <&scif3_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can0 {
|
||||
pinctrl-0 = <&can0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&irqc>;
|
||||
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb0>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&iic3 {
|
||||
status = "okay";
|
||||
|
||||
pmic@58 {
|
||||
compatible = "dlg,da9063";
|
||||
reg = <0x58>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_irq_pins>;
|
||||
interrupt-parent = <&irqc>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
|
||||
rtc {
|
||||
compatible = "dlg,da9063-rtc";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "dlg,da9063-watchdog";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du0_pins>, <&du1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
|
||||
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7123_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -1,928 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the R-Car V2H (R8A77920) SoC
|
||||
*
|
||||
* Copyright (C) 2016 Cogent Embedded Inc.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/clock/r8a7792-cpg-mssr.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/power/r8a7792-sysc.h>
|
||||
|
||||
/ {
|
||||
compatible = "renesas,r8a7792";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
i2c5 = &i2c5;
|
||||
i2c6 = &iic3;
|
||||
spi0 = &qspi;
|
||||
spi1 = &msiof0;
|
||||
spi2 = &msiof1;
|
||||
vin0 = &vin0;
|
||||
vin1 = &vin1;
|
||||
vin2 = &vin2;
|
||||
vin3 = &vin3;
|
||||
vin4 = &vin4;
|
||||
vin5 = &vin5;
|
||||
};
|
||||
|
||||
/* External CAN clock */
|
||||
can_clk: can {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
/* This value must be overridden by the board. */
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0>;
|
||||
clock-frequency = <1000000000>;
|
||||
clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
|
||||
power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
|
||||
enable-method = "renesas,apmu";
|
||||
next-level-cache = <&L2_CA15>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <1>;
|
||||
clock-frequency = <1000000000>;
|
||||
clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
|
||||
power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
|
||||
enable-method = "renesas,apmu";
|
||||
next-level-cache = <&L2_CA15>;
|
||||
};
|
||||
|
||||
L2_CA15: cache-controller-0 {
|
||||
compatible = "cache";
|
||||
cache-unified;
|
||||
cache-level = <2>;
|
||||
power-domains = <&sysc R8A7792_PD_CA15_SCU>;
|
||||
};
|
||||
};
|
||||
|
||||
/* External root clock */
|
||||
extal_clk: extal {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
/* This value must be overridden by the board. */
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a15-pmu";
|
||||
interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-affinity = <&cpu0>, <&cpu1>;
|
||||
};
|
||||
|
||||
/* External SCIF clock */
|
||||
scif_clk: scif {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
/* This value must be overridden by the board. */
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "simple-bus";
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
rwdt: watchdog@e6020000 {
|
||||
compatible = "renesas,r8a7792-wdt",
|
||||
"renesas,rcar-gen2-wdt";
|
||||
reg = <0 0xe6020000 0 0x0c>;
|
||||
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 402>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 402>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio0: gpio@e6050000 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6050000 0 0x50>;
|
||||
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 0 29>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 912>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 912>;
|
||||
};
|
||||
|
||||
gpio1: gpio@e6051000 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6051000 0 0x50>;
|
||||
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 32 23>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 911>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 911>;
|
||||
};
|
||||
|
||||
gpio2: gpio@e6052000 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6052000 0 0x50>;
|
||||
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 64 32>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 910>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 910>;
|
||||
};
|
||||
|
||||
gpio3: gpio@e6053000 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6053000 0 0x50>;
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 96 28>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 909>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 909>;
|
||||
};
|
||||
|
||||
gpio4: gpio@e6054000 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6054000 0 0x50>;
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 128 17>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 908>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 908>;
|
||||
};
|
||||
|
||||
gpio5: gpio@e6055000 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6055000 0 0x50>;
|
||||
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 160 17>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 907>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 907>;
|
||||
};
|
||||
|
||||
gpio6: gpio@e6055100 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6055100 0 0x50>;
|
||||
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 192 17>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 905>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 905>;
|
||||
};
|
||||
|
||||
gpio7: gpio@e6055200 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6055200 0 0x50>;
|
||||
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 224 17>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 904>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 904>;
|
||||
};
|
||||
|
||||
gpio8: gpio@e6055300 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6055300 0 0x50>;
|
||||
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 256 17>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 921>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 921>;
|
||||
};
|
||||
|
||||
gpio9: gpio@e6055400 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6055400 0 0x50>;
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 288 17>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 919>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 919>;
|
||||
};
|
||||
|
||||
gpio10: gpio@e6055500 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6055500 0 0x50>;
|
||||
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 320 32>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 914>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 914>;
|
||||
};
|
||||
|
||||
gpio11: gpio@e6055600 {
|
||||
compatible = "renesas,gpio-r8a7792",
|
||||
"renesas,rcar-gen2-gpio";
|
||||
reg = <0 0xe6055600 0 0x50>;
|
||||
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pfc 0 352 30>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
clocks = <&cpg CPG_MOD 913>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 913>;
|
||||
};
|
||||
|
||||
pfc: pinctrl@e6060000 {
|
||||
compatible = "renesas,pfc-r8a7792";
|
||||
reg = <0 0xe6060000 0 0x144>;
|
||||
};
|
||||
|
||||
cpg: clock-controller@e6150000 {
|
||||
compatible = "renesas,r8a7792-cpg-mssr";
|
||||
reg = <0 0xe6150000 0 0x1000>;
|
||||
clocks = <&extal_clk>;
|
||||
clock-names = "extal";
|
||||
#clock-cells = <2>;
|
||||
#power-domain-cells = <0>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
apmu@e6152000 {
|
||||
compatible = "renesas,r8a7792-apmu", "renesas,apmu";
|
||||
reg = <0 0xe6152000 0 0x188>;
|
||||
cpus = <&cpu0>, <&cpu1>;
|
||||
};
|
||||
|
||||
rst: reset-controller@e6160000 {
|
||||
compatible = "renesas,r8a7792-rst";
|
||||
reg = <0 0xe6160000 0 0x0100>;
|
||||
};
|
||||
|
||||
sysc: system-controller@e6180000 {
|
||||
compatible = "renesas,r8a7792-sysc";
|
||||
reg = <0 0xe6180000 0 0x0200>;
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
|
||||
irqc: interrupt-controller@e61c0000 {
|
||||
compatible = "renesas,irqc-r8a7792", "renesas,irqc";
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
reg = <0 0xe61c0000 0 0x200>;
|
||||
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 407>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 407>;
|
||||
};
|
||||
|
||||
icram0: sram@e63a0000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0 0xe63a0000 0 0x12000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0xe63a0000 0x12000>;
|
||||
};
|
||||
|
||||
icram1: sram@e63c0000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0 0xe63c0000 0 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0xe63c0000 0x1000>;
|
||||
|
||||
smp-sram@0 {
|
||||
compatible = "renesas,smp-sram";
|
||||
reg = <0 0x100>;
|
||||
};
|
||||
};
|
||||
|
||||
/* I2C doesn't need pinmux */
|
||||
i2c0: i2c@e6508000 {
|
||||
compatible = "renesas,i2c-r8a7792",
|
||||
"renesas,rcar-gen2-i2c";
|
||||
reg = <0 0xe6508000 0 0x40>;
|
||||
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 931>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 931>;
|
||||
i2c-scl-internal-delay-ns = <6>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c1: i2c@e6518000 {
|
||||
compatible = "renesas,i2c-r8a7792",
|
||||
"renesas,rcar-gen2-i2c";
|
||||
reg = <0 0xe6518000 0 0x40>;
|
||||
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 930>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 930>;
|
||||
i2c-scl-internal-delay-ns = <6>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c2: i2c@e6530000 {
|
||||
compatible = "renesas,i2c-r8a7792",
|
||||
"renesas,rcar-gen2-i2c";
|
||||
reg = <0 0xe6530000 0 0x40>;
|
||||
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 929>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 929>;
|
||||
i2c-scl-internal-delay-ns = <6>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c3: i2c@e6540000 {
|
||||
compatible = "renesas,i2c-r8a7792",
|
||||
"renesas,rcar-gen2-i2c";
|
||||
reg = <0 0xe6540000 0 0x40>;
|
||||
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 928>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 928>;
|
||||
i2c-scl-internal-delay-ns = <6>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c4: i2c@e6520000 {
|
||||
compatible = "renesas,i2c-r8a7792",
|
||||
"renesas,rcar-gen2-i2c";
|
||||
reg = <0 0xe6520000 0 0x40>;
|
||||
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 927>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 927>;
|
||||
i2c-scl-internal-delay-ns = <6>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c5: i2c@e6528000 {
|
||||
compatible = "renesas,i2c-r8a7792",
|
||||
"renesas,rcar-gen2-i2c";
|
||||
reg = <0 0xe6528000 0 0x40>;
|
||||
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 925>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 925>;
|
||||
i2c-scl-internal-delay-ns = <110>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
iic3: i2c@e60b0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "renesas,iic-r8a7792",
|
||||
"renesas,rcar-gen2-iic",
|
||||
"renesas,rmobile-iic";
|
||||
reg = <0 0xe60b0000 0 0x425>;
|
||||
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 926>;
|
||||
dmas = <&dmac0 0x77>, <&dmac0 0x78>,
|
||||
<&dmac1 0x77>, <&dmac1 0x78>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 926>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dmac0: dma-controller@e6700000 {
|
||||
compatible = "renesas,dmac-r8a7792",
|
||||
"renesas,rcar-dmac";
|
||||
reg = <0 0xe6700000 0 0x20000>;
|
||||
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "error",
|
||||
"ch0", "ch1", "ch2", "ch3",
|
||||
"ch4", "ch5", "ch6", "ch7",
|
||||
"ch8", "ch9", "ch10", "ch11",
|
||||
"ch12", "ch13", "ch14";
|
||||
clocks = <&cpg CPG_MOD 219>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 219>;
|
||||
#dma-cells = <1>;
|
||||
dma-channels = <15>;
|
||||
};
|
||||
|
||||
dmac1: dma-controller@e6720000 {
|
||||
compatible = "renesas,dmac-r8a7792",
|
||||
"renesas,rcar-dmac";
|
||||
reg = <0 0xe6720000 0 0x20000>;
|
||||
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "error",
|
||||
"ch0", "ch1", "ch2", "ch3",
|
||||
"ch4", "ch5", "ch6", "ch7",
|
||||
"ch8", "ch9", "ch10", "ch11",
|
||||
"ch12", "ch13", "ch14";
|
||||
clocks = <&cpg CPG_MOD 218>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 218>;
|
||||
#dma-cells = <1>;
|
||||
dma-channels = <15>;
|
||||
};
|
||||
|
||||
avb: ethernet@e6800000 {
|
||||
compatible = "renesas,etheravb-r8a7792",
|
||||
"renesas,etheravb-rcar-gen2";
|
||||
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
|
||||
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 812>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 812>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
qspi: spi@e6b10000 {
|
||||
compatible = "renesas,qspi-r8a7792", "renesas,qspi";
|
||||
reg = <0 0xe6b10000 0 0x2c>;
|
||||
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 917>;
|
||||
dmas = <&dmac0 0x17>, <&dmac0 0x18>,
|
||||
<&dmac1 0x17>, <&dmac1 0x18>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 917>;
|
||||
num-cs = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
scif0: serial@e6e60000 {
|
||||
compatible = "renesas,scif-r8a7792",
|
||||
"renesas,rcar-gen2-scif", "renesas,scif";
|
||||
reg = <0 0xe6e60000 0 64>;
|
||||
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 721>,
|
||||
<&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
|
||||
clock-names = "fck", "brg_int", "scif_clk";
|
||||
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
|
||||
<&dmac1 0x29>, <&dmac1 0x2a>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 721>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
scif1: serial@e6e68000 {
|
||||
compatible = "renesas,scif-r8a7792",
|
||||
"renesas,rcar-gen2-scif", "renesas,scif";
|
||||
reg = <0 0xe6e68000 0 64>;
|
||||
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 720>,
|
||||
<&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
|
||||
clock-names = "fck", "brg_int", "scif_clk";
|
||||
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
|
||||
<&dmac1 0x2d>, <&dmac1 0x2e>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 720>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
scif2: serial@e6e58000 {
|
||||
compatible = "renesas,scif-r8a7792",
|
||||
"renesas,rcar-gen2-scif", "renesas,scif";
|
||||
reg = <0 0xe6e58000 0 64>;
|
||||
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 719>,
|
||||
<&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
|
||||
clock-names = "fck", "brg_int", "scif_clk";
|
||||
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
|
||||
<&dmac1 0x2b>, <&dmac1 0x2c>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 719>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
scif3: serial@e6ea8000 {
|
||||
compatible = "renesas,scif-r8a7792",
|
||||
"renesas,rcar-gen2-scif", "renesas,scif";
|
||||
reg = <0 0xe6ea8000 0 64>;
|
||||
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 718>,
|
||||
<&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
|
||||
clock-names = "fck", "brg_int", "scif_clk";
|
||||
dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
|
||||
<&dmac1 0x2f>, <&dmac1 0x30>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 718>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
hscif0: serial@e62c0000 {
|
||||
compatible = "renesas,hscif-r8a7792",
|
||||
"renesas,rcar-gen2-hscif", "renesas,hscif";
|
||||
reg = <0 0xe62c0000 0 96>;
|
||||
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 717>,
|
||||
<&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
|
||||
clock-names = "fck", "brg_int", "scif_clk";
|
||||
dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
|
||||
<&dmac1 0x39>, <&dmac1 0x3a>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 717>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
hscif1: serial@e62c8000 {
|
||||
compatible = "renesas,hscif-r8a7792",
|
||||
"renesas,rcar-gen2-hscif", "renesas,hscif";
|
||||
reg = <0 0xe62c8000 0 96>;
|
||||
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 716>,
|
||||
<&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
|
||||
clock-names = "fck", "brg_int", "scif_clk";
|
||||
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
|
||||
<&dmac1 0x4d>, <&dmac1 0x4e>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 716>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
msiof0: spi@e6e20000 {
|
||||
compatible = "renesas,msiof-r8a7792",
|
||||
"renesas,rcar-gen2-msiof";
|
||||
reg = <0 0xe6e20000 0 0x0064>;
|
||||
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 000>;
|
||||
dmas = <&dmac0 0x51>, <&dmac0 0x52>,
|
||||
<&dmac1 0x51>, <&dmac1 0x52>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
msiof1: spi@e6e10000 {
|
||||
compatible = "renesas,msiof-r8a7792",
|
||||
"renesas,rcar-gen2-msiof";
|
||||
reg = <0 0xe6e10000 0 0x0064>;
|
||||
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 208>;
|
||||
dmas = <&dmac0 0x55>, <&dmac0 0x56>,
|
||||
<&dmac1 0x55>, <&dmac1 0x56>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 208>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
can0: can@e6e80000 {
|
||||
compatible = "renesas,can-r8a7792",
|
||||
"renesas,rcar-gen2-can";
|
||||
reg = <0 0xe6e80000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 916>,
|
||||
<&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>;
|
||||
clock-names = "clkp1", "clkp2", "can_clk";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 916>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
can1: can@e6e88000 {
|
||||
compatible = "renesas,can-r8a7792",
|
||||
"renesas,rcar-gen2-can";
|
||||
reg = <0 0xe6e88000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 915>,
|
||||
<&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>;
|
||||
clock-names = "clkp1", "clkp2", "can_clk";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 915>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vin0: video@e6ef0000 {
|
||||
compatible = "renesas,vin-r8a7792",
|
||||
"renesas,rcar-gen2-vin";
|
||||
reg = <0 0xe6ef0000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 811>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 811>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vin1: video@e6ef1000 {
|
||||
compatible = "renesas,vin-r8a7792",
|
||||
"renesas,rcar-gen2-vin";
|
||||
reg = <0 0xe6ef1000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 810>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 810>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vin2: video@e6ef2000 {
|
||||
compatible = "renesas,vin-r8a7792",
|
||||
"renesas,rcar-gen2-vin";
|
||||
reg = <0 0xe6ef2000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 809>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 809>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vin3: video@e6ef3000 {
|
||||
compatible = "renesas,vin-r8a7792",
|
||||
"renesas,rcar-gen2-vin";
|
||||
reg = <0 0xe6ef3000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 808>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 808>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vin4: video@e6ef4000 {
|
||||
compatible = "renesas,vin-r8a7792",
|
||||
"renesas,rcar-gen2-vin";
|
||||
reg = <0 0xe6ef4000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 805>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 805>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vin5: video@e6ef5000 {
|
||||
compatible = "renesas,vin-r8a7792",
|
||||
"renesas,rcar-gen2-vin";
|
||||
reg = <0 0xe6ef5000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 804>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 804>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhi0: mmc@ee100000 {
|
||||
compatible = "renesas,sdhi-r8a7792",
|
||||
"renesas,rcar-gen2-sdhi";
|
||||
reg = <0 0xee100000 0 0x328>;
|
||||
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
|
||||
<&dmac1 0xcd>, <&dmac1 0xce>;
|
||||
dma-names = "tx", "rx", "tx", "rx";
|
||||
clocks = <&cpg CPG_MOD 314>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 314>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gic: interrupt-controller@f1001000 {
|
||||
compatible = "arm,gic-400";
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0 0xf1001000 0 0x1000>,
|
||||
<0 0xf1002000 0 0x2000>,
|
||||
<0 0xf1004000 0 0x2000>,
|
||||
<0 0xf1006000 0 0x2000>;
|
||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
|
||||
IRQ_TYPE_LEVEL_HIGH)>;
|
||||
clocks = <&cpg CPG_MOD 408>;
|
||||
clock-names = "clk";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 408>;
|
||||
};
|
||||
|
||||
vsp@fe928000 {
|
||||
compatible = "renesas,vsp1";
|
||||
reg = <0 0xfe928000 0 0x8000>;
|
||||
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 131>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 131>;
|
||||
};
|
||||
|
||||
vsp@fe930000 {
|
||||
compatible = "renesas,vsp1";
|
||||
reg = <0 0xfe930000 0 0x8000>;
|
||||
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 128>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 128>;
|
||||
};
|
||||
|
||||
vsp@fe938000 {
|
||||
compatible = "renesas,vsp1";
|
||||
reg = <0 0xfe938000 0 0x8000>;
|
||||
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 127>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 127>;
|
||||
};
|
||||
|
||||
jpu: jpeg-codec@fe980000 {
|
||||
compatible = "renesas,jpu-r8a7792",
|
||||
"renesas,rcar-gen2-jpu";
|
||||
reg = <0 0xfe980000 0 0x10300>;
|
||||
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 106>;
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 106>;
|
||||
};
|
||||
|
||||
du: display@feb00000 {
|
||||
compatible = "renesas,du-r8a7792";
|
||||
reg = <0 0xfeb00000 0 0x40000>;
|
||||
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
|
||||
clock-names = "du.0", "du.1";
|
||||
resets = <&cpg 724>;
|
||||
reset-names = "du.0";
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
du_out_rgb0: endpoint {
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
du_out_rgb1: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
prr: chipid@ff000044 {
|
||||
compatible = "renesas,prr";
|
||||
reg = <0 0xff000044 0 4>;
|
||||
};
|
||||
|
||||
cmt0: timer@ffca0000 {
|
||||
compatible = "renesas,r8a7792-cmt0",
|
||||
"renesas,rcar-gen2-cmt0";
|
||||
reg = <0 0xffca0000 0 0x1004>;
|
||||
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 124>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 124>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
cmt1: timer@e6130000 {
|
||||
compatible = "renesas,r8a7792-cmt1",
|
||||
"renesas,rcar-gen2-cmt1";
|
||||
reg = <0 0xe6130000 0 0x1004>;
|
||||
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 329>;
|
||||
clock-names = "fck";
|
||||
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 329>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv7-timer";
|
||||
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
};
|
||||
@@ -1,818 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Gose board
|
||||
*
|
||||
* Copyright (C) 2014-2015 Renesas Electronics Corporation
|
||||
*/
|
||||
|
||||
/*
|
||||
* SSI-AK4643
|
||||
*
|
||||
* SW1: 1: AK4643
|
||||
* 2: CN22
|
||||
* 3: ADV7511
|
||||
*
|
||||
* This command is required when Playback/Capture
|
||||
*
|
||||
* amixer set "LINEOUT Mixer DACL" on
|
||||
* amixer set "DVC Out" 100%
|
||||
* amixer set "DVC In" 100%
|
||||
*
|
||||
* You can use Mute
|
||||
*
|
||||
* amixer set "DVC Out Mute" on
|
||||
* amixer set "DVC In Mute" on
|
||||
*
|
||||
* You can use Volume Ramp
|
||||
*
|
||||
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
|
||||
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
|
||||
* amixer set "DVC Out Ramp" on
|
||||
* aplay xxx.wav &
|
||||
* amixer set "DVC Out" 80% // Volume Down
|
||||
* amixer set "DVC Out" 100% // Volume Up
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a7793.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Gose";
|
||||
compatible = "renesas,gose", "renesas,r8a7793";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif0;
|
||||
serial1 = &scif1;
|
||||
i2c9 = &gpioi2c2;
|
||||
i2c10 = &gpioi2c4;
|
||||
i2c11 = &i2chdmi;
|
||||
i2c12 = &i2cexio4;
|
||||
mmc0 = &sdhi0;
|
||||
mmc1 = &sdhi1;
|
||||
mmc2 = &sdhi2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
keyboard {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&keyboard_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-1 {
|
||||
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_1>;
|
||||
label = "SW2-1";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-2 {
|
||||
gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_2>;
|
||||
label = "SW2-2";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-3 {
|
||||
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_3>;
|
||||
label = "SW2-3";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-4 {
|
||||
gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_4>;
|
||||
label = "SW2-4";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-a {
|
||||
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_A>;
|
||||
label = "SW30";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-b {
|
||||
gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_B>;
|
||||
label = "SW31";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-c {
|
||||
gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_C>;
|
||||
label = "SW32";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-d {
|
||||
gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_D>;
|
||||
label = "SW33";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-e {
|
||||
gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_E>;
|
||||
label = "SW34";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-f {
|
||||
gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_F>;
|
||||
label = "SW35";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-g {
|
||||
gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_G>;
|
||||
label = "SW36";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led6 {
|
||||
gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED6";
|
||||
};
|
||||
led7 {
|
||||
gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED7";
|
||||
};
|
||||
led8 {
|
||||
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED8";
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI0 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi1: regulator-vcc-sdhi1 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI1 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi1: regulator-vccq-sdhi1 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI1 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi2: regulator-vcc-sdhi2 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI2 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi2: regulator-vccq-sdhi2 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI2 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
audio_clock: audio_clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <11289600>;
|
||||
};
|
||||
|
||||
rsnd_ak4643: sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,format = "left_j";
|
||||
simple-audio-card,bitclock-master = <&sndcodec>;
|
||||
simple-audio-card,frame-master = <&sndcodec>;
|
||||
|
||||
sndcpu: simple-audio-card,cpu {
|
||||
sound-dai = <&rcar_sound>;
|
||||
};
|
||||
|
||||
sndcodec: simple-audio-card,codec {
|
||||
sound-dai = <&ak4643>;
|
||||
clocks = <&audio_clock>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-in {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&adv7612_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_out: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
composite-in {
|
||||
compatible = "composite-video-connector";
|
||||
|
||||
port {
|
||||
composite_con_in: endpoint {
|
||||
remote-endpoint = <&adv7180_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x2_clk: x2-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
x13_clk: x13-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
gpioi2c2: i2c-9 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
gpioi2c4: i2c-10 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
/*
|
||||
* A fallback to GPIO is provided for I2C2.
|
||||
*/
|
||||
i2chdmi: i2c-11 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c2>, <&gpioi2c2>;
|
||||
i2c-bus-name = "i2c-hdmi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ak4643: codec@12 {
|
||||
compatible = "asahi-kasei,ak4643";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x12>;
|
||||
};
|
||||
|
||||
composite-in@20 {
|
||||
compatible = "adi,adv7180cp";
|
||||
reg = <0x20>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7180_in: endpoint {
|
||||
remote-endpoint = <&composite_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
adv7180_out: endpoint {
|
||||
bus-width = <8>;
|
||||
remote-endpoint = <&vin1ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-in@4c {
|
||||
compatible = "adi,adv7612";
|
||||
reg = <0x4c>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
default-input = <0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7612_in: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
adv7612_out: endpoint {
|
||||
remote-endpoint = <&vin0ep2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "renesas,r1ex24002", "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
|
||||
* A fallback to GPIO is provided.
|
||||
*/
|
||||
i2cexio4: i2c-12 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c4>, <&gpioi2c4>;
|
||||
i2c-bus-name = "i2c-exio4";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
|
||||
<&x13_clk>, <&x2_clk>;
|
||||
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lvds0 {
|
||||
ports {
|
||||
port@1 {
|
||||
lvds_connector: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
i2c2_pins: i2c2 {
|
||||
groups = "i2c2";
|
||||
function = "i2c2";
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4 {
|
||||
groups = "i2c4_c";
|
||||
function = "i2c4";
|
||||
};
|
||||
|
||||
du_pins: du {
|
||||
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
|
||||
function = "du";
|
||||
};
|
||||
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data_d";
|
||||
function = "scif0";
|
||||
};
|
||||
|
||||
scif1_pins: scif1 {
|
||||
groups = "scif1_data_d";
|
||||
function = "scif1";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
|
||||
ether_pins: ether {
|
||||
groups = "eth_link", "eth_mdio", "eth_rmii";
|
||||
function = "eth";
|
||||
};
|
||||
|
||||
phy1_pins: phy1 {
|
||||
groups = "intc_irq0";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
pmic_irq_pins: pmicirq {
|
||||
groups = "intc_irq2";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi0_pins_uhs: sd0_uhs {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi1_pins: sd1 {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi1_pins_uhs: sd1_uhs {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi2_pins: sd2 {
|
||||
groups = "sdhi2_data4", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi2_pins_uhs: sd2_uhs {
|
||||
groups = "sdhi2_data4", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
qspi_pins: qspi {
|
||||
groups = "qspi_ctrl", "qspi_data4";
|
||||
function = "qspi";
|
||||
};
|
||||
|
||||
sound_pins: sound {
|
||||
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
|
||||
function = "ssi";
|
||||
};
|
||||
|
||||
sound_clk_pins: sound_clk {
|
||||
groups = "audio_clk_a";
|
||||
function = "audio_clk";
|
||||
};
|
||||
|
||||
keyboard_pins: keyboard {
|
||||
pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
vin0_pins: vin0 {
|
||||
groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
|
||||
function = "vin0";
|
||||
};
|
||||
|
||||
vin1_pins: vin1 {
|
||||
groups = "vin1_data8", "vin1_clk";
|
||||
function = "vin1";
|
||||
};
|
||||
};
|
||||
|
||||
ðer {
|
||||
pinctrl-0 = <ðer_pins>, <&phy1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
renesas,ether-link-active-low;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-id0022.1537",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
micrel,led-mode = <1>;
|
||||
reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&cmt0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&vdd_dvfs>;
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif1 {
|
||||
pinctrl-0 = <&scif1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-1 = <&sdhi0_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
vqmmc-supply = <&vccq_sdhi0>;
|
||||
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi1 {
|
||||
pinctrl-0 = <&sdhi1_pins>;
|
||||
pinctrl-1 = <&sdhi1_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi1>;
|
||||
vqmmc-supply = <&vccq_sdhi1>;
|
||||
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi2 {
|
||||
pinctrl-0 = <&sdhi2_pins>;
|
||||
pinctrl-1 = <&sdhi2_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi2>;
|
||||
vqmmc-supply = <&vccq_sdhi2>;
|
||||
cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-0 = <&qspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fl512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <30000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "loader";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@40000 {
|
||||
label = "user";
|
||||
reg = <0x00040000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
partition@440000 {
|
||||
label = "flash";
|
||||
reg = <0x00440000 0x03bc0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
pinctrl-names = "i2c-hdmi";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_irq_pins>;
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pmic@58 {
|
||||
compatible = "dlg,da9063";
|
||||
reg = <0x58>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
|
||||
rtc {
|
||||
compatible = "dlg,da9063-rtc";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "dlg,da9063-watchdog";
|
||||
};
|
||||
};
|
||||
|
||||
vdd_dvfs: regulator@68 {
|
||||
compatible = "dlg,da9210";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "i2c-exio4";
|
||||
};
|
||||
|
||||
&rcar_sound {
|
||||
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/* Single DAI */
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
rcar_sound,dai {
|
||||
dai0 {
|
||||
playback = <&ssi0>, <&src2>, <&dvc0>;
|
||||
capture = <&ssi1>, <&src3>, <&dvc1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
shared-pin;
|
||||
};
|
||||
|
||||
/* HDMI video input */
|
||||
&vin0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&vin0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
port {
|
||||
vin0ep2: endpoint {
|
||||
remote-endpoint = <&adv7612_out>;
|
||||
bus-width = <24>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
pclk-sample = <1>;
|
||||
data-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* composite video input */
|
||||
&vin1 {
|
||||
pinctrl-0 = <&vin1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
vin1ep: endpoint {
|
||||
remote-endpoint = <&adv7180_out>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,533 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Alt board
|
||||
*
|
||||
* Copyright (C) 2014 Renesas Electronics Corporation
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a7794.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Alt";
|
||||
compatible = "renesas,alt", "renesas,r8a7794";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif2;
|
||||
i2c9 = &gpioi2c1;
|
||||
i2c10 = &gpioi2c4;
|
||||
i2c11 = &i2chdmi;
|
||||
i2c12 = &i2cexio4;
|
||||
mmc0 = &mmcif0;
|
||||
mmc1 = &sdhi0;
|
||||
mmc2 = &sdhi1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
d3_3v: regulator-d3-3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "D3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI0 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi1: regulator-vcc-sdhi1 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI1 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi1: regulator-vccq-sdhi1 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI1 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
lbsc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
keyboard {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&keyboard_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
one {
|
||||
linux,code = <KEY_1>;
|
||||
label = "SW2-1";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
two {
|
||||
linux,code = <KEY_2>;
|
||||
label = "SW2-2";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
three {
|
||||
linux,code = <KEY_3>;
|
||||
label = "SW2-3";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
four {
|
||||
linux,code = <KEY_4>;
|
||||
label = "SW2-4";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
vga-encoder {
|
||||
compatible = "adi,adv7123";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7123_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb1>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7123_out: endpoint {
|
||||
remote-endpoint = <&vga_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga {
|
||||
compatible = "vga-connector";
|
||||
|
||||
port {
|
||||
vga_in: endpoint {
|
||||
remote-endpoint = <&adv7123_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x2_clk: x2-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
x13_clk: x13-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
gpioi2c1: i2c-9 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
};
|
||||
|
||||
gpioi2c4: i2c-10 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
/*
|
||||
* A fallback to GPIO is provided for I2C1.
|
||||
*/
|
||||
i2chdmi: i2c-11 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c1>, <&gpioi2c1>;
|
||||
i2c-bus-name = "i2c-hdmi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
composite-in@20 {
|
||||
compatible = "adi,adv7180";
|
||||
reg = <0x20>;
|
||||
|
||||
port {
|
||||
adv7180: endpoint {
|
||||
bus-width = <8>;
|
||||
remote-endpoint = <&vin0ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "renesas,r1ex24002", "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
|
||||
* A fallback to GPIO is provided.
|
||||
*/
|
||||
i2cexio4: i2c-14 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c4>, <&gpioi2c4>;
|
||||
i2c-bus-name = "i2c-exio4";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pci0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pci1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
|
||||
<&x13_clk>, <&x2_clk>;
|
||||
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7123_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
du_pins: du {
|
||||
groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
|
||||
function = "du1";
|
||||
};
|
||||
|
||||
scif2_pins: scif2 {
|
||||
groups = "scif2_data";
|
||||
function = "scif2";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
|
||||
ether_pins: ether {
|
||||
groups = "eth_link", "eth_mdio", "eth_rmii";
|
||||
function = "eth";
|
||||
};
|
||||
|
||||
phy1_pins: phy1 {
|
||||
groups = "intc_irq8";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
groups = "i2c1";
|
||||
function = "i2c1";
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4 {
|
||||
groups = "i2c4";
|
||||
function = "i2c4";
|
||||
};
|
||||
|
||||
vin0_pins: vin0 {
|
||||
groups = "vin0_data8", "vin0_clk";
|
||||
function = "vin0";
|
||||
};
|
||||
|
||||
mmcif0_pins: mmcif0 {
|
||||
groups = "mmc_data8", "mmc_ctrl";
|
||||
function = "mmc";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi0_pins_uhs: sd0_uhs {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi1_pins: sd1 {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi1_pins_uhs: sd1_uhs {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
usb0_pins: usb0 {
|
||||
groups = "usb0";
|
||||
function = "usb0";
|
||||
};
|
||||
|
||||
usb1_pins: usb1 {
|
||||
groups = "usb1";
|
||||
function = "usb1";
|
||||
};
|
||||
|
||||
keyboard_pins: keyboard {
|
||||
pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&cmt0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pfc {
|
||||
qspi_pins: qspi {
|
||||
groups = "qspi_ctrl", "qspi_data4";
|
||||
function = "qspi";
|
||||
};
|
||||
};
|
||||
|
||||
ðer {
|
||||
pinctrl-0 = <ðer_pins>, <&phy1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
renesas,ether-link-active-low;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-id0022.1537",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
||||
micrel,led-mode = <1>;
|
||||
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmcif0 {
|
||||
pinctrl-0 = <&mmcif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&d3_3v>;
|
||||
vqmmc-supply = <&d3_3v>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-1 = <&sdhi0_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
vqmmc-supply = <&vccq_sdhi0>;
|
||||
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi1 {
|
||||
pinctrl-0 = <&sdhi1_pins>;
|
||||
pinctrl-1 = <&sdhi1_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi1>;
|
||||
vqmmc-supply = <&vccq_sdhi1>;
|
||||
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "i2c-hdmi";
|
||||
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "i2c-exio4";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pmic@58 {
|
||||
compatible = "dlg,da9063";
|
||||
reg = <0x58>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
|
||||
rtc {
|
||||
compatible = "dlg,da9063-rtc";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "dlg,da9063-watchdog";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vin0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&vin0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
port {
|
||||
vin0ep: endpoint {
|
||||
remote-endpoint = <&adv7180>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&scif2 {
|
||||
pinctrl-0 = <&scif2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-0 = <&qspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fl512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <30000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "loader";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@40000 {
|
||||
label = "system";
|
||||
reg = <0x00040000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@80000 {
|
||||
label = "user";
|
||||
reg = <0x00080000 0x03f80000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -1,578 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the SILK board
|
||||
*
|
||||
* Copyright (C) 2014 Renesas Electronics Corporation
|
||||
* Copyright (C) 2014-2015 Renesas Solutions Corp.
|
||||
* Copyright (C) 2014-2015 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SSI-AK4643
|
||||
*
|
||||
* SW1: 2-1: AK4643
|
||||
* 2-3: ADV7511
|
||||
*
|
||||
* This command is required before playback/capture:
|
||||
*
|
||||
* amixer set "LINEOUT Mixer DACL" on
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a7794.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "SILK";
|
||||
compatible = "renesas,silk", "renesas,r8a7794";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif2;
|
||||
i2c9 = &gpioi2c1;
|
||||
i2c10 = &i2chdmi;
|
||||
mmc0 = &mmcif0;
|
||||
mmc1 = &sdhi1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
keyboard {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&keyboard_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-3 {
|
||||
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_3>;
|
||||
label = "SW3";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-4 {
|
||||
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_4>;
|
||||
label = "SW4";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-6 {
|
||||
gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_6>;
|
||||
label = "SW6";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-a {
|
||||
gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_A>;
|
||||
label = "SW12-1";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-b {
|
||||
gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_B>;
|
||||
label = "SW12-2";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-c {
|
||||
gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_C>;
|
||||
label = "SW12-3";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-d {
|
||||
gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_D>;
|
||||
label = "SW12-4";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
};
|
||||
|
||||
d3_3v: regulator-d3-3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "D3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_sdhi1: regulator-vcc-sdhi1 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI1 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi1: regulator-vccq-sdhi1 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI1 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1>, <1800000 0>;
|
||||
};
|
||||
|
||||
vga-encoder {
|
||||
compatible = "adi,adv7123";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7123_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb1>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7123_out: endpoint {
|
||||
remote-endpoint = <&vga_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga {
|
||||
compatible = "vga-connector";
|
||||
|
||||
port {
|
||||
vga_in: endpoint {
|
||||
remote-endpoint = <&adv7123_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x2_clk: x2-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
x3_clk: x3-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
x9_clk: audio_clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <12288000>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,format = "left_j";
|
||||
simple-audio-card,bitclock-master = <&soundcodec>;
|
||||
simple-audio-card,frame-master = <&soundcodec>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&rcar_sound>;
|
||||
};
|
||||
|
||||
soundcodec: simple-audio-card,codec {
|
||||
sound-dai = <&ak4643>;
|
||||
clocks = <&x9_clk>;
|
||||
};
|
||||
};
|
||||
|
||||
gpioi2c1: i2c-9 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "i2c-gpio";
|
||||
status = "disabled";
|
||||
scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <5>;
|
||||
};
|
||||
|
||||
/*
|
||||
* A fallback to GPIO is provided for I2C1.
|
||||
*/
|
||||
i2chdmi: i2c-10 {
|
||||
compatible = "i2c-demux-pinctrl";
|
||||
i2c-parent = <&i2c1>, <&gpioi2c1>;
|
||||
i2c-bus-name = "i2c-hdmi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ak4643: codec@12 {
|
||||
compatible = "asahi-kasei,ak4643";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x12>;
|
||||
};
|
||||
|
||||
composite-in@20 {
|
||||
compatible = "adi,adv7180";
|
||||
reg = <0x20>;
|
||||
|
||||
port {
|
||||
adv7180: endpoint {
|
||||
bus-width = <8>;
|
||||
remote-endpoint = <&vin0ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio5>;
|
||||
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb0>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "renesas,r1ex24002", "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
scif2_pins: scif2 {
|
||||
groups = "scif2_data";
|
||||
function = "scif2";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
|
||||
ether_pins: ether {
|
||||
groups = "eth_link", "eth_mdio", "eth_rmii";
|
||||
function = "eth";
|
||||
};
|
||||
|
||||
phy1_pins: phy1 {
|
||||
groups = "intc_irq8";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
groups = "i2c1";
|
||||
function = "i2c1";
|
||||
};
|
||||
|
||||
mmcif0_pins: mmcif0 {
|
||||
groups = "mmc_data8", "mmc_ctrl";
|
||||
function = "mmc";
|
||||
};
|
||||
|
||||
sdhi1_pins: sd1 {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
};
|
||||
|
||||
qspi_pins: qspi {
|
||||
groups = "qspi_ctrl", "qspi_data4";
|
||||
function = "qspi";
|
||||
};
|
||||
|
||||
vin0_pins: vin0 {
|
||||
groups = "vin0_data8", "vin0_clk";
|
||||
function = "vin0";
|
||||
};
|
||||
|
||||
usb0_pins: usb0 {
|
||||
groups = "usb0";
|
||||
function = "usb0";
|
||||
};
|
||||
|
||||
usb1_pins: usb1 {
|
||||
groups = "usb1";
|
||||
function = "usb1";
|
||||
};
|
||||
|
||||
du0_pins: du0 {
|
||||
groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
|
||||
function = "du0";
|
||||
};
|
||||
|
||||
du1_pins: du1 {
|
||||
groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
|
||||
function = "du1";
|
||||
};
|
||||
|
||||
keyboard_pins: keyboard {
|
||||
pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
ssi_pins: sound {
|
||||
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
|
||||
function = "ssi";
|
||||
};
|
||||
|
||||
audio_clk_pins: audio_clk {
|
||||
groups = "audio_clkc";
|
||||
function = "audio_clk";
|
||||
};
|
||||
};
|
||||
|
||||
&scif2 {
|
||||
pinctrl-0 = <&scif2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
ðer {
|
||||
pinctrl-0 = <ðer_pins>, <&phy1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
renesas,ether-link-active-low;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-id0022.1537",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
||||
micrel,led-mode = <1>;
|
||||
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "i2c-hdmi";
|
||||
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pmic@58 {
|
||||
compatible = "dlg,da9063";
|
||||
reg = <0x58>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
|
||||
onkey {
|
||||
compatible = "dlg,da9063-onkey";
|
||||
};
|
||||
|
||||
rtc {
|
||||
compatible = "dlg,da9063-rtc";
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "dlg,da9063-watchdog";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mmcif0 {
|
||||
pinctrl-0 = <&mmcif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&d3_3v>;
|
||||
vqmmc-supply = <&d3_3v>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi1 {
|
||||
pinctrl-0 = <&sdhi1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi1>;
|
||||
vqmmc-supply = <&vccq_sdhi1>;
|
||||
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-0 = <&qspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fl512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <30000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "loader";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@40000 {
|
||||
label = "user";
|
||||
reg = <0x00040000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
partition@440000 {
|
||||
label = "flash";
|
||||
reg = <0x00440000 0x03bc0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* composite video input */
|
||||
&vin0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&vin0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
port {
|
||||
vin0ep: endpoint {
|
||||
remote-endpoint = <&adv7180>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pci0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pci1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du0_pins>, <&du1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
|
||||
<&x2_clk>, <&x3_clk>;
|
||||
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7123_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rcar_sound {
|
||||
pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
/* Single DAI */
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
rcar_sound,dai {
|
||||
dai0 {
|
||||
playback = <&ssi0>;
|
||||
capture = <&ssi1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
shared-pin;
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,49 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Salvator-X board with R-Car H3 ES1.x
|
||||
*
|
||||
* Copyright (C) 2015 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77950.dtsi"
|
||||
#include "salvator-x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Salvator-X board based on r8a77950";
|
||||
compatible = "renesas,salvator-x", "renesas,r8a7795";
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x38000000>;
|
||||
};
|
||||
|
||||
memory@500000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x5 0x00000000 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
memory@600000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x6 0x00000000 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
memory@700000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x7 0x00000000 0x0 0x40000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 722>,
|
||||
<&cpg CPG_MOD 721>,
|
||||
<&versaclock5 1>,
|
||||
<&x21_clk>,
|
||||
<&x22_clk>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.2", "du.3",
|
||||
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
|
||||
};
|
||||
@@ -1,37 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES1.x
|
||||
*
|
||||
* Copyright (C) 2016 Renesas Electronics Corp.
|
||||
* Copyright (C) 2016 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77950.dtsi"
|
||||
#include "ulcb.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas H3ULCB board based on r8a77950";
|
||||
compatible = "renesas,h3ulcb", "renesas,r8a7795";
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x38000000>;
|
||||
};
|
||||
|
||||
memory@500000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x5 0x00000000 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
memory@600000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x6 0x00000000 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
memory@700000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x7 0x00000000 0x0 0x40000000>;
|
||||
};
|
||||
};
|
||||
@@ -1,330 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the R-Car H3 (R8A77950) SoC
|
||||
*
|
||||
* Copyright (C) 2015 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
#include "r8a77951.dtsi"
|
||||
|
||||
#undef SOC_HAS_USB2_CH3
|
||||
|
||||
&audma0 {
|
||||
iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>,
|
||||
<&ipmmu_mp1 2>, <&ipmmu_mp1 3>,
|
||||
<&ipmmu_mp1 4>, <&ipmmu_mp1 5>,
|
||||
<&ipmmu_mp1 6>, <&ipmmu_mp1 7>,
|
||||
<&ipmmu_mp1 8>, <&ipmmu_mp1 9>,
|
||||
<&ipmmu_mp1 10>, <&ipmmu_mp1 11>,
|
||||
<&ipmmu_mp1 12>, <&ipmmu_mp1 13>,
|
||||
<&ipmmu_mp1 14>, <&ipmmu_mp1 15>;
|
||||
};
|
||||
|
||||
&audma1 {
|
||||
iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>,
|
||||
<&ipmmu_mp1 18>, <&ipmmu_mp1 19>,
|
||||
<&ipmmu_mp1 20>, <&ipmmu_mp1 21>,
|
||||
<&ipmmu_mp1 22>, <&ipmmu_mp1 23>,
|
||||
<&ipmmu_mp1 24>, <&ipmmu_mp1 25>,
|
||||
<&ipmmu_mp1 26>, <&ipmmu_mp1 27>,
|
||||
<&ipmmu_mp1 28>, <&ipmmu_mp1 29>,
|
||||
<&ipmmu_mp1 30>, <&ipmmu_mp1 31>;
|
||||
};
|
||||
|
||||
&cluster0_opp {
|
||||
/delete-node/ opp-1600000000;
|
||||
/delete-node/ opp-1700000000;
|
||||
};
|
||||
|
||||
&du {
|
||||
renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>;
|
||||
};
|
||||
|
||||
&fcpvb1 {
|
||||
iommus = <&ipmmu_vp0 7>;
|
||||
};
|
||||
|
||||
&fcpf1 {
|
||||
iommus = <&ipmmu_vp0 1>;
|
||||
};
|
||||
|
||||
&fcpvi1 {
|
||||
iommus = <&ipmmu_vp0 9>;
|
||||
};
|
||||
|
||||
&fcpvd2 {
|
||||
iommus = <&ipmmu_vi0 10>;
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-ranges = <&pfc 0 32 28>;
|
||||
};
|
||||
|
||||
&ipmmu_vi0 {
|
||||
renesas,ipmmu-main = <&ipmmu_mm 11>;
|
||||
};
|
||||
|
||||
&ipmmu_vp0 {
|
||||
renesas,ipmmu-main = <&ipmmu_mm 12>;
|
||||
};
|
||||
|
||||
&ipmmu_vc0 {
|
||||
renesas,ipmmu-main = <&ipmmu_mm 9>;
|
||||
};
|
||||
|
||||
&ipmmu_vc1 {
|
||||
renesas,ipmmu-main = <&ipmmu_mm 10>;
|
||||
};
|
||||
|
||||
&ipmmu_rt {
|
||||
renesas,ipmmu-main = <&ipmmu_mm 7>;
|
||||
};
|
||||
|
||||
&soc {
|
||||
/delete-node/ dma-controller@e6460000;
|
||||
/delete-node/ dma-controller@e6470000;
|
||||
|
||||
ipmmu_mp1: iommu@ec680000 {
|
||||
compatible = "renesas,ipmmu-r8a7795";
|
||||
reg = <0 0xec680000 0 0x1000>;
|
||||
renesas,ipmmu-main = <&ipmmu_mm 5>;
|
||||
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
||||
#iommu-cells = <1>;
|
||||
};
|
||||
|
||||
ipmmu_sy: iommu@e7730000 {
|
||||
compatible = "renesas,ipmmu-r8a7795";
|
||||
reg = <0 0xe7730000 0 0x1000>;
|
||||
renesas,ipmmu-main = <&ipmmu_mm 8>;
|
||||
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
||||
#iommu-cells = <1>;
|
||||
};
|
||||
|
||||
/delete-node/ iommu@fd950000;
|
||||
/delete-node/ iommu@fd960000;
|
||||
/delete-node/ iommu@fd970000;
|
||||
/delete-node/ iommu@febe0000;
|
||||
/delete-node/ iommu@fe980000;
|
||||
|
||||
xhci1: usb@ee040000 {
|
||||
compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
|
||||
reg = <0 0xee040000 0 0xc00>;
|
||||
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 327>;
|
||||
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 327>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/delete-node/ usb@e659c000;
|
||||
/delete-node/ usb@ee0e0000;
|
||||
/delete-node/ usb@ee0e0100;
|
||||
|
||||
/delete-node/ usb-phy@ee0e0200;
|
||||
|
||||
fdp1@fe948000 {
|
||||
compatible = "renesas,fdp1";
|
||||
reg = <0 0xfe948000 0 0x2400>;
|
||||
interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 117>;
|
||||
power-domains = <&sysc R8A7795_PD_A3VP>;
|
||||
resets = <&cpg 117>;
|
||||
renesas,fcp = <&fcpf2>;
|
||||
};
|
||||
|
||||
fcpf2: fcp@fe952000 {
|
||||
compatible = "renesas,fcpf";
|
||||
reg = <0 0xfe952000 0 0x200>;
|
||||
clocks = <&cpg CPG_MOD 613>;
|
||||
power-domains = <&sysc R8A7795_PD_A3VP>;
|
||||
resets = <&cpg 613>;
|
||||
iommus = <&ipmmu_vp0 2>;
|
||||
};
|
||||
|
||||
fcpvd3: fcp@fea3f000 {
|
||||
compatible = "renesas,fcpv";
|
||||
reg = <0 0xfea3f000 0 0x200>;
|
||||
clocks = <&cpg CPG_MOD 600>;
|
||||
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 600>;
|
||||
iommus = <&ipmmu_vi0 11>;
|
||||
};
|
||||
|
||||
fcpvi2: fcp@fe9cf000 {
|
||||
compatible = "renesas,fcpv";
|
||||
reg = <0 0xfe9cf000 0 0x200>;
|
||||
clocks = <&cpg CPG_MOD 609>;
|
||||
power-domains = <&sysc R8A7795_PD_A3VP>;
|
||||
resets = <&cpg 609>;
|
||||
iommus = <&ipmmu_vp0 10>;
|
||||
};
|
||||
|
||||
vspd3: vsp@fea38000 {
|
||||
compatible = "renesas,vsp2";
|
||||
reg = <0 0xfea38000 0 0x5000>;
|
||||
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 620>;
|
||||
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 620>;
|
||||
|
||||
renesas,fcp = <&fcpvd3>;
|
||||
};
|
||||
|
||||
vspi2: vsp@fe9c0000 {
|
||||
compatible = "renesas,vsp2";
|
||||
reg = <0 0xfe9c0000 0 0x8000>;
|
||||
interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 629>;
|
||||
power-domains = <&sysc R8A7795_PD_A3VP>;
|
||||
resets = <&cpg 629>;
|
||||
|
||||
renesas,fcp = <&fcpvi2>;
|
||||
};
|
||||
|
||||
csi21: csi2@fea90000 {
|
||||
compatible = "renesas,r8a7795-csi2";
|
||||
reg = <0 0xfea90000 0 0x10000>;
|
||||
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cpg CPG_MOD 713>;
|
||||
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 713>;
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reg = <1>;
|
||||
|
||||
csi21vin0: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&vin0csi21>;
|
||||
};
|
||||
csi21vin1: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&vin1csi21>;
|
||||
};
|
||||
csi21vin2: endpoint@2 {
|
||||
reg = <2>;
|
||||
remote-endpoint = <&vin2csi21>;
|
||||
};
|
||||
csi21vin3: endpoint@3 {
|
||||
reg = <3>;
|
||||
remote-endpoint = <&vin3csi21>;
|
||||
};
|
||||
csi21vin4: endpoint@4 {
|
||||
reg = <4>;
|
||||
remote-endpoint = <&vin4csi21>;
|
||||
};
|
||||
csi21vin5: endpoint@5 {
|
||||
reg = <5>;
|
||||
remote-endpoint = <&vin5csi21>;
|
||||
};
|
||||
csi21vin6: endpoint@6 {
|
||||
reg = <6>;
|
||||
remote-endpoint = <&vin6csi21>;
|
||||
};
|
||||
csi21vin7: endpoint@7 {
|
||||
reg = <7>;
|
||||
remote-endpoint = <&vin7csi21>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vin0 {
|
||||
ports {
|
||||
port@1 {
|
||||
vin0csi21: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csi21vin0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vin1 {
|
||||
ports {
|
||||
port@1 {
|
||||
vin1csi21: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csi21vin1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vin2 {
|
||||
ports {
|
||||
port@1 {
|
||||
vin2csi21: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csi21vin2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vin3 {
|
||||
ports {
|
||||
port@1 {
|
||||
vin3csi21: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csi21vin3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vin4 {
|
||||
ports {
|
||||
port@1 {
|
||||
vin4csi21: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csi21vin4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vin5 {
|
||||
ports {
|
||||
port@1 {
|
||||
vin5csi21: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csi21vin5>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vin6 {
|
||||
ports {
|
||||
port@1 {
|
||||
vin6csi21: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csi21vin6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vin7 {
|
||||
ports {
|
||||
port@1 {
|
||||
vin7csi21: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&csi21vin7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,37 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Salvator-X board with R-Car M3-W
|
||||
*
|
||||
* Copyright (C) 2016 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77960.dtsi"
|
||||
#include "salvator-x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Salvator-X board based on r8a77960";
|
||||
compatible = "renesas,salvator-x", "renesas,r8a7796";
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
|
||||
memory@600000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x6 0x00000000 0x0 0x80000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 722>,
|
||||
<&versaclock5 1>,
|
||||
<&x21_clk>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.2",
|
||||
"dclkin.0", "dclkin.1", "dclkin.2";
|
||||
};
|
||||
@@ -1,38 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W
|
||||
*
|
||||
* Copyright (C) 2016 Renesas Electronics Corp.
|
||||
* Copyright (C) 2016 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77960.dtsi"
|
||||
#include "ulcb.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas M3ULCB board based on r8a77960";
|
||||
compatible = "renesas,m3ulcb", "renesas,r8a7796";
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x38000000>;
|
||||
};
|
||||
|
||||
memory@600000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x6 0x00000000 0x0 0x40000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 722>,
|
||||
<&versaclock5 1>,
|
||||
<&versaclock5 3>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.2",
|
||||
"dclkin.0", "dclkin.1", "dclkin.2";
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,32 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Salvator-X board with R-Car M3-N
|
||||
*
|
||||
* Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77965.dtsi"
|
||||
#include "salvator-x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Salvator-X board based on r8a77965";
|
||||
compatible = "renesas,salvator-x", "renesas,r8a77965";
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 721>,
|
||||
<&versaclock5 1>,
|
||||
<&x21_clk>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.3",
|
||||
"dclkin.0", "dclkin.1", "dclkin.3";
|
||||
};
|
||||
@@ -1,33 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board with R-Car M3-N
|
||||
*
|
||||
* Copyright (C) 2018 Renesas Electronics Corp.
|
||||
* Copyright (C) 2018 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77965.dtsi"
|
||||
#include "ulcb.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas M3NULCB board based on r8a77965";
|
||||
compatible = "renesas,m3nulcb", "renesas,r8a77965";
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&cpg CPG_MOD 723>,
|
||||
<&cpg CPG_MOD 721>,
|
||||
<&versaclock5 1>,
|
||||
<&versaclock5 3>,
|
||||
<&versaclock5 2>;
|
||||
clock-names = "du.0", "du.1", "du.3",
|
||||
"dclkin.0", "dclkin.1", "dclkin.3";
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,405 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Eagle board with R-Car V3M
|
||||
*
|
||||
* Copyright (C) 2016-2017 Renesas Electronics Corp.
|
||||
* Copyright (C) 2017 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77970.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Renesas Eagle board based on r8a77970";
|
||||
compatible = "renesas,eagle", "renesas,r8a77970";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
serial0 = &scif0;
|
||||
ethernet0 = &avb;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
d3p3: regulator-fixed {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_out: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
lvds-decoder {
|
||||
compatible = "thine,thc63lvd1024";
|
||||
|
||||
vcc-supply = <&d3p3>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
thc63lvd1024_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
thc63lvd1024_out: endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x38000000>;
|
||||
};
|
||||
|
||||
x1_clk: x1-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&avb {
|
||||
pinctrl-0 = <&avb_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
renesas,no-ether-link;
|
||||
phy-handle = <&phy0>;
|
||||
rx-internal-delay-ps = <1800>;
|
||||
tx-internal-delay-ps = <2000>;
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id0022.1622",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
rxc-skew-ps = <1500>;
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&canfd {
|
||||
pinctrl-0 = <&canfd0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
channel0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&csi40 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
csi40_in: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
remote-endpoint = <&max9286_out0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>, <&x1_clk>;
|
||||
clock-names = "du.0", "dclkin.0";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <16666666>;
|
||||
};
|
||||
|
||||
&extalr_clk {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
io_expander: gpio@20 {
|
||||
compatible = "onnn,pca9654";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&thc63lvd1024_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
gmsl0: gmsl-deserializer@48 {
|
||||
compatible = "maxim,max9286";
|
||||
reg = <0x48>;
|
||||
|
||||
maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
|
||||
enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
max9286_out0: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
remote-endpoint = <&csi40_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c-mux {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lvds0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&thc63lvd1024_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
avb_pins: avb0 {
|
||||
groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
|
||||
function = "avb0";
|
||||
};
|
||||
|
||||
canfd0_pins: canfd0 {
|
||||
groups = "canfd0_data_a";
|
||||
function = "canfd0";
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0 {
|
||||
groups = "i2c0";
|
||||
function = "i2c0";
|
||||
};
|
||||
|
||||
i2c3_pins: i2c3 {
|
||||
groups = "i2c3_a";
|
||||
function = "i2c3";
|
||||
};
|
||||
|
||||
qspi0_pins: qspi0 {
|
||||
groups = "qspi0_ctrl", "qspi0_data4";
|
||||
function = "qspi0";
|
||||
};
|
||||
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data";
|
||||
function = "scif0";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk_b";
|
||||
function = "scif_clk";
|
||||
};
|
||||
};
|
||||
|
||||
&rpc {
|
||||
pinctrl-0 = <&qspi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fs512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
bootparam@0 {
|
||||
reg = <0x00000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
cr7@40000 {
|
||||
reg = <0x00040000 0x080000>;
|
||||
read-only;
|
||||
};
|
||||
cert_header_sa3@c0000 {
|
||||
reg = <0x000c0000 0x080000>;
|
||||
read-only;
|
||||
};
|
||||
bl2@140000 {
|
||||
reg = <0x00140000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
cert_header_sa6@180000 {
|
||||
reg = <0x00180000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
bl31@1c0000 {
|
||||
reg = <0x001c0000 0x460000>;
|
||||
read-only;
|
||||
};
|
||||
uboot@640000 {
|
||||
reg = <0x00640000 0x0c0000>;
|
||||
read-only;
|
||||
};
|
||||
uboot-env@700000 {
|
||||
reg = <0x00700000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
dtb@740000 {
|
||||
reg = <0x00740000 0x080000>;
|
||||
};
|
||||
kernel@7c0000 {
|
||||
reg = <0x007c0000 0x1400000>;
|
||||
};
|
||||
user@1bc0000 {
|
||||
reg = <0x01bc0000 0x2440000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
@@ -1,303 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the V3M Starter Kit board
|
||||
*
|
||||
* Copyright (C) 2017 Renesas Electronics Corp.
|
||||
* Copyright (C) 2017 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77970.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Renesas V3M Starter Kit board";
|
||||
compatible = "renesas,v3msk", "renesas,r8a77970";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
serial0 = &scif0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
lvds-decoder {
|
||||
compatible = "thine,thc63lvd1024";
|
||||
vcc-supply = <&vcc_d3_3v>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
thc63lvd1024_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
thc63lvd1024_out: endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
|
||||
osc5_clk: osc5-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
vcc_d1_8v: regulator-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_D1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_d3_3v: regulator-1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_D3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_vddq_vin0: regulator-2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_VDDQ_VIN0";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&avb {
|
||||
pinctrl-0 = <&avb_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
renesas,no-ether-link;
|
||||
phy-handle = <&phy0>;
|
||||
rx-internal-delay-ps = <1800>;
|
||||
tx-internal-delay-ps = <2000>;
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id0022.1622",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
rxc-skew-ps = <1500>;
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&osc5_clk>;
|
||||
clock-names = "du.0", "dclkin.0";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <16666666>;
|
||||
};
|
||||
|
||||
&extalr_clk {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
|
||||
avdd-supply = <&vcc_d1_8v>;
|
||||
dvdd-supply = <&vcc_d1_8v>;
|
||||
pvdd-supply = <&vcc_d1_8v>;
|
||||
bgvdd-supply = <&vcc_d1_8v>;
|
||||
dvdd-3v-supply = <&vcc_d3_3v>;
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&thc63lvd1024_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lvds0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&thc63lvd1024_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-0 = <&mmc_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&vcc_d3_3v>;
|
||||
vqmmc-supply = <&vcc_vddq_vin0>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pfc {
|
||||
avb_pins: avb0 {
|
||||
groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
|
||||
function = "avb0";
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0 {
|
||||
groups = "i2c0";
|
||||
function = "i2c0";
|
||||
};
|
||||
|
||||
mmc_pins: mmc_3_3v {
|
||||
groups = "mmc_data8", "mmc_ctrl";
|
||||
function = "mmc";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
qspi0_pins: qspi0 {
|
||||
groups = "qspi0_ctrl", "qspi0_data4";
|
||||
function = "qspi0";
|
||||
};
|
||||
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data";
|
||||
function = "scif0";
|
||||
};
|
||||
};
|
||||
|
||||
&rpc {
|
||||
pinctrl-0 = <&qspi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fs512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
bootparam@0 {
|
||||
reg = <0x00000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
cr7@40000 {
|
||||
reg = <0x00040000 0x080000>;
|
||||
read-only;
|
||||
};
|
||||
cert_header_sa3@c0000 {
|
||||
reg = <0x000c0000 0x080000>;
|
||||
read-only;
|
||||
};
|
||||
bl2@140000 {
|
||||
reg = <0x00140000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
cert_header_sa6@180000 {
|
||||
reg = <0x00180000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
bl31@1c0000 {
|
||||
reg = <0x001c0000 0x460000>;
|
||||
read-only;
|
||||
};
|
||||
uboot@640000 {
|
||||
reg = <0x00640000 0x0c0000>;
|
||||
read-only;
|
||||
};
|
||||
uboot-env@700000 {
|
||||
reg = <0x00700000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
dtb@740000 {
|
||||
reg = <0x00740000 0x080000>;
|
||||
};
|
||||
kernel@7c0000 {
|
||||
reg = <0x007c0000 0x1400000>;
|
||||
};
|
||||
user@1bc0000 {
|
||||
reg = <0x01bc0000 0x2440000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,24 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Condor board with R-Car V3H
|
||||
*
|
||||
* Copyright (C) 2018 Renesas Electronics Corp.
|
||||
* Copyright (C) 2018 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77980.dtsi"
|
||||
#include "condor-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Condor board based on r8a77980";
|
||||
compatible = "renesas,condor", "renesas,r8a77980";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
eeprom@50 {
|
||||
compatible = "rohm,br24t01", "atmel,24c01";
|
||||
reg = <0x50>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
@@ -1,293 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the V3H Starter Kit board
|
||||
*
|
||||
* Copyright (C) 2018 Renesas Electronics Corp.
|
||||
* Copyright (C) 2018 Cogent Embedded, Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77980.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Renesas V3H Starter Kit board";
|
||||
compatible = "renesas,v3hsk", "renesas,r8a77980";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
i2c5 = &i2c5;
|
||||
serial0 = &scif0;
|
||||
ethernet0 = &gether;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
lvds-decoder {
|
||||
compatible = "thine,thc63lvd1024";
|
||||
vcc-supply = <&vcc3v3_d5>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
thc63lvd1024_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
thc63lvd1024_out: endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0 0x48000000 0 0x78000000>;
|
||||
};
|
||||
|
||||
osc1_clk: osc1-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
|
||||
vcc1v8_d4: regulator-0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC1V8_D4";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc3v3_d5: regulator-1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC3V3_D5";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
clocks = <&cpg CPG_MOD 724>,
|
||||
<&osc1_clk>;
|
||||
clock-names = "du.0", "dclkin.0";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <16666666>;
|
||||
};
|
||||
|
||||
&extalr_clk {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&gether {
|
||||
pinctrl-0 = <&gether_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&phy0>;
|
||||
renesas,no-ether-link;
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id0022.1622",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
rxc-skew-ps = <1500>;
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
|
||||
avdd-supply = <&vcc1v8_d4>;
|
||||
dvdd-supply = <&vcc1v8_d4>;
|
||||
pvdd-supply = <&vcc1v8_d4>;
|
||||
bgvdd-supply = <&vcc1v8_d4>;
|
||||
dvdd-3v-supply = <&vcc3v3_d5>;
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&thc63lvd1024_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&lvds0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&thc63lvd1024_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pfc {
|
||||
gether_pins: gether {
|
||||
groups = "gether_mdio_a", "gether_rgmii",
|
||||
"gether_txcrefclk", "gether_txcrefclk_mega";
|
||||
function = "gether";
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0 {
|
||||
groups = "i2c0";
|
||||
function = "i2c0";
|
||||
};
|
||||
|
||||
qspi0_pins: qspi0 {
|
||||
groups = "qspi0_ctrl", "qspi0_data4";
|
||||
function = "qspi0";
|
||||
};
|
||||
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data";
|
||||
function = "scif0";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk_b";
|
||||
function = "scif_clk";
|
||||
};
|
||||
};
|
||||
|
||||
&rpc {
|
||||
pinctrl-0 = <&qspi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fs512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
bootparam@0 {
|
||||
reg = <0x00000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
cr7@40000 {
|
||||
reg = <0x00040000 0x080000>;
|
||||
read-only;
|
||||
};
|
||||
cert_header_sa3@c0000 {
|
||||
reg = <0x000c0000 0x080000>;
|
||||
read-only;
|
||||
};
|
||||
bl2@140000 {
|
||||
reg = <0x00140000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
cert_header_sa6@180000 {
|
||||
reg = <0x00180000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
bl31@1c0000 {
|
||||
reg = <0x001c0000 0x460000>;
|
||||
read-only;
|
||||
};
|
||||
uboot@640000 {
|
||||
reg = <0x00640000 0x0c0000>;
|
||||
read-only;
|
||||
};
|
||||
uboot-env@700000 {
|
||||
reg = <0x00700000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
dtb@740000 {
|
||||
reg = <0x00740000 0x080000>;
|
||||
};
|
||||
kernel@7c0000 {
|
||||
reg = <0x007c0000 0x1400000>;
|
||||
};
|
||||
user@1bc0000 {
|
||||
reg = <0x01bc0000 0x2440000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,15 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Ebisu board with R-Car E3
|
||||
*
|
||||
* Copyright (C) 2018 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77990.dtsi"
|
||||
#include "ebisu.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Ebisu board based on r8a77990";
|
||||
compatible = "renesas,ebisu", "renesas,r8a77990";
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,16 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Draak board with R-Car D3
|
||||
*
|
||||
* Copyright (C) 2016-2018 Renesas Electronics Corp.
|
||||
* Copyright (C) 2017 Glider bvba
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a77995.dtsi"
|
||||
#include "draak.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Draak board based on r8a77995";
|
||||
compatible = "renesas,draak", "renesas,r8a77995";
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,359 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Falcon CPU board
|
||||
*
|
||||
* Copyright (C) 2020 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "r8a779a0.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Falcon CPU board";
|
||||
compatible = "renesas,falcon-cpu", "renesas,r8a779a0";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
i2c5 = &i2c5;
|
||||
i2c6 = &i2c6;
|
||||
serial0 = &scif0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&keys_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-1 {
|
||||
gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_1>;
|
||||
label = "SW47";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
|
||||
key-2 {
|
||||
gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_2>;
|
||||
label = "SW48";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
|
||||
key-3 {
|
||||
gpios = <&gpio6 20 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_3>;
|
||||
label = "SW49";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-1 {
|
||||
gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <1>;
|
||||
};
|
||||
led-2 {
|
||||
gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <2>;
|
||||
};
|
||||
led-3 {
|
||||
gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
|
||||
memory@500000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x5 0x00000000 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
memory@600000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x6 0x00000000 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
memory@700000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x7 0x00000000 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
mini-dp-con {
|
||||
compatible = "dp-connector";
|
||||
label = "CN5";
|
||||
type = "mini";
|
||||
|
||||
port {
|
||||
mini_dp_con_in: endpoint {
|
||||
remote-endpoint = <&sn65dsi86_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
reg_1p2v: regulator-1p2v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.2V";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sn65dsi86_refclk: clk-x6 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <38400000>;
|
||||
};
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
dsi0_out: endpoint {
|
||||
remote-endpoint = <&sn65dsi86_in>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <16666666>;
|
||||
};
|
||||
|
||||
&extalr_clk {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "cpu-board";
|
||||
reg = <0x50>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
bridge@2c {
|
||||
pinctrl-0 = <&irq0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
compatible = "ti,sn65dsi86";
|
||||
reg = <0x2c>;
|
||||
|
||||
clocks = <&sn65dsi86_refclk>;
|
||||
clock-names = "refclk";
|
||||
|
||||
interrupt-parent = <&intc_ex>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
vccio-supply = <®_1p8v>;
|
||||
vpll-supply = <®_1p8v>;
|
||||
vcca-supply = <®_1p2v>;
|
||||
vcc-supply = <®_1p2v>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
sn65dsi86_in: endpoint {
|
||||
remote-endpoint = <&dsi0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
sn65dsi86_out: endpoint {
|
||||
remote-endpoint = <&mini_dp_con_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
pinctrl-0 = <&i2c6_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-0 = <&mmc_pins>;
|
||||
pinctrl-1 = <&mmc_pins>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
bus-width = <8>;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
full-pwr-cycle-in-suspend;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
i2c0_pins: i2c0 {
|
||||
groups = "i2c0";
|
||||
function = "i2c0";
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
groups = "i2c1";
|
||||
function = "i2c1";
|
||||
};
|
||||
|
||||
i2c6_pins: i2c6 {
|
||||
groups = "i2c6";
|
||||
function = "i2c6";
|
||||
};
|
||||
|
||||
irq0_pins: irq0 {
|
||||
groups = "intc_ex_irq0";
|
||||
function = "intc_ex";
|
||||
};
|
||||
|
||||
keys_pins: keys {
|
||||
pins = "GP_6_18", "GP_6_19", "GP_6_20";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mmc_pins: mmc {
|
||||
groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
|
||||
function = "mmc";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
qspi0_pins: qspi0 {
|
||||
groups = "qspi0_ctrl", "qspi0_data4";
|
||||
function = "qspi0";
|
||||
};
|
||||
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data", "scif0_ctrl";
|
||||
function = "scif0";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
};
|
||||
|
||||
&rpc {
|
||||
pinctrl-0 = <&qspi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fs512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
boot@0 {
|
||||
reg = <0x0 0xcc0000>;
|
||||
read-only;
|
||||
};
|
||||
user@cc0000 {
|
||||
reg = <0xcc0000 0x3340000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
@@ -1,270 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Falcon CSI/DSI sub-board
|
||||
*
|
||||
* Copyright (C) 2021 Glider bv
|
||||
*/
|
||||
|
||||
#include <dt-bindings/media/video-interfaces.h>
|
||||
|
||||
&csi40 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
csi40_in: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
remote-endpoint = <&max96712_out0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&csi42 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
csi42_in: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
remote-endpoint = <&max96712_out1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&csi43 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
csi43_in: endpoint {
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
remote-endpoint = <&max96712_out2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pca9654_a: gpio@21 {
|
||||
compatible = "onnn,pca9654";
|
||||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
pca9654_b: gpio@22 {
|
||||
compatible = "onnn,pca9654";
|
||||
reg = <0x22>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
pca9654_c: gpio@23 {
|
||||
compatible = "onnn,pca9654";
|
||||
reg = <0x23>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
eeprom@52 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "csi-dsi-sub-board-id";
|
||||
reg = <0x52>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
gmsl0: gmsl-deserializer@49 {
|
||||
compatible = "maxim,max96712";
|
||||
reg = <0x49>;
|
||||
enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
max96712_out0: endpoint {
|
||||
bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
remote-endpoint = <&csi40_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gmsl1: gmsl-deserializer@4b {
|
||||
compatible = "maxim,max96712";
|
||||
reg = <0x4b>;
|
||||
enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
max96712_out1: endpoint {
|
||||
bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
lane-polarities = <0 0 0 0 1>;
|
||||
remote-endpoint = <&csi42_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gmsl2: gmsl-deserializer@6b {
|
||||
compatible = "maxim,max96712";
|
||||
reg = <0x6b>;
|
||||
enable-gpios = <&pca9654_c 0 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
max96712_out2: endpoint {
|
||||
bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
lane-polarities = <0 0 0 0 1>;
|
||||
remote-endpoint = <&csi43_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&isp0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&isp2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&isp3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin01 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin02 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin03 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin04 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin05 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin06 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin07 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin16 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin17 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin18 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin19 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin20 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin21 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin22 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin23 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin24 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin25 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin26 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin27 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin28 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin29 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin30 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin31 {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -1,15 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Falcon Ethernet sub-board
|
||||
*
|
||||
* Copyright (C) 2021 Glider bv
|
||||
*/
|
||||
|
||||
&i2c0 {
|
||||
eeprom@53 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "ethernet-sub-board-id";
|
||||
reg = <0x53>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
@@ -1,101 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Falcon CPU and BreakOut boards with R-Car V3U
|
||||
*
|
||||
* Copyright (C) 2020 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a779a0-falcon-cpu.dtsi"
|
||||
#include "r8a779a0-falcon-csi-dsi.dtsi"
|
||||
#include "r8a779a0-falcon-ethernet.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Falcon CPU and Breakout boards based on r8a779a0";
|
||||
compatible = "renesas,falcon-breakout", "renesas,falcon-cpu", "renesas,r8a779a0";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &avb0;
|
||||
};
|
||||
};
|
||||
|
||||
&avb0 {
|
||||
pinctrl-0 = <&avb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy-handle = <&phy0>;
|
||||
tx-internal-delay-ps = <2000>;
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id0022.1622",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
rxc-skew-ps = <1500>;
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&can_clk {
|
||||
clock-frequency = <40000000>;
|
||||
};
|
||||
|
||||
&canfd {
|
||||
pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
channel0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
channel1 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
eeprom@51 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "breakout-board";
|
||||
reg = <0x51>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&pfc {
|
||||
avb0_pins: avb0 {
|
||||
mux {
|
||||
groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
|
||||
"avb0_txcrefclk";
|
||||
function = "avb0";
|
||||
};
|
||||
|
||||
pins_mdio {
|
||||
groups = "avb0_mdio";
|
||||
drive-strength = <21>;
|
||||
};
|
||||
|
||||
pins_mii {
|
||||
groups = "avb0_rgmii";
|
||||
drive-strength = <21>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
can_clk_pins: can-clk {
|
||||
groups = "can_clk";
|
||||
function = "can_clk";
|
||||
};
|
||||
|
||||
canfd0_pins: canfd0 {
|
||||
groups = "canfd0_data";
|
||||
function = "canfd0";
|
||||
};
|
||||
|
||||
canfd1_pins: canfd1 {
|
||||
groups = "canfd1_data";
|
||||
function = "canfd1";
|
||||
};
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,210 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Device Tree Source for the Spider CPU board
|
||||
*
|
||||
* Copyright (C) 2021 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "r8a779f0.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Spider CPU board";
|
||||
compatible = "renesas,spider-cpu", "renesas,r8a779f0";
|
||||
|
||||
aliases {
|
||||
serial0 = &hscif0;
|
||||
serial1 = &scif0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:1843200n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-7 {
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <7>;
|
||||
};
|
||||
|
||||
led-8 {
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
|
||||
memory@480000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x4 0x80000000 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
rc21012_ufs: clk-rc21012-ufs {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <38400000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&extalr_clk {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&hscif0 {
|
||||
pinctrl-0 = <&hscif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
gpio_exp_20: gpio@20 {
|
||||
compatible = "ti,tca9554";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-0 = <&i2c4_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "cpu-board";
|
||||
reg = <0x50>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* This board also has a microSD slot which we will not support upstream
|
||||
* because we cannot directly switch voltages in software.
|
||||
*/
|
||||
&mmc0 {
|
||||
pinctrl-0 = <&mmc_pins>;
|
||||
pinctrl-1 = <&mmc_pins>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
bus-width = <8>;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
full-pwr-cycle-in-suspend;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
hscif0_pins: hscif0 {
|
||||
groups = "hscif0_data", "hscif0_ctrl";
|
||||
function = "hscif0";
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0 {
|
||||
groups = "i2c0";
|
||||
function = "i2c0";
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4 {
|
||||
groups = "i2c4";
|
||||
function = "i2c4";
|
||||
};
|
||||
|
||||
mmc_pins: mmc {
|
||||
groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
|
||||
function = "mmc";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data", "scif0_ctrl";
|
||||
function = "scif0";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
&ufs {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs30_clk {
|
||||
compatible = "gpio-gate-clock";
|
||||
clocks = <&rc21012_ufs>;
|
||||
enable-gpios = <&gpio_exp_20 4 GPIO_ACTIVE_LOW>;
|
||||
/delete-property/ clock-frequency;
|
||||
};
|
||||
@@ -1,105 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree Source for the Spider Ethernet sub-board
|
||||
*
|
||||
* Copyright (C) 2021 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
ð_serdes {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
eeprom@52 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "ethernet-sub-board";
|
||||
reg = <0x52>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&pfc {
|
||||
tsn0_pins: tsn0 {
|
||||
groups = "tsn0_mdio_b", "tsn0_link_b";
|
||||
function = "tsn0";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
tsn1_pins: tsn1 {
|
||||
groups = "tsn1_mdio_b", "tsn1_link_b";
|
||||
function = "tsn1";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
tsn2_pins: tsn2 {
|
||||
groups = "tsn2_mdio_b", "tsn2_link_b";
|
||||
function = "tsn2";
|
||||
power-source = <1800>;
|
||||
};
|
||||
};
|
||||
|
||||
&rswitch {
|
||||
pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>, <&tsn2_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
ethernet-ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
phy-handle = <&u101>;
|
||||
phy-mode = "sgmii";
|
||||
phys = <ð_serdes 0>;
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
u101: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
phy-handle = <&u201>;
|
||||
phy-mode = "sgmii";
|
||||
phys = <ð_serdes 1>;
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
u201: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
phy-handle = <&u301>;
|
||||
phy-mode = "sgmii";
|
||||
phys = <ð_serdes 2>;
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
u301: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -1,24 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Device Tree Source for the Spider CPU and BreakOut boards
|
||||
*
|
||||
* Copyright (C) 2021 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a779f0-spider-cpu.dtsi"
|
||||
#include "r8a779f0-spider-ethernet.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Spider CPU and Breakout boards based on r8a779f0";
|
||||
compatible = "renesas,spider-breakout", "renesas,spider-cpu", "renesas,r8a779f0";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
eeprom@51 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "breakout-board";
|
||||
reg = <0x51>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,375 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
/*
|
||||
* Device Tree Source for the White Hawk CPU board
|
||||
*
|
||||
* Copyright (C) 2022 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
#include "r8a779g0.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "Renesas White Hawk CPU board";
|
||||
compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &avb0;
|
||||
serial0 = &hscif0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
||||
stdout-path = "serial0:921600n8";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&keys_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-1 {
|
||||
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_1>;
|
||||
label = "SW47";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
|
||||
key-2 {
|
||||
gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_2>;
|
||||
label = "SW48";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
|
||||
key-3 {
|
||||
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_3>;
|
||||
label = "SW49";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-1 {
|
||||
gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <1>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <2>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@48000000 {
|
||||
device_type = "memory";
|
||||
/* first 128MB is reserved for secure area. */
|
||||
reg = <0x0 0x48000000 0x0 0x78000000>;
|
||||
};
|
||||
|
||||
memory@480000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x4 0x80000000 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
memory@600000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x6 0x00000000 0x1 0x00000000>;
|
||||
};
|
||||
|
||||
mini-dp-con {
|
||||
compatible = "dp-connector";
|
||||
label = "CN5";
|
||||
type = "mini";
|
||||
|
||||
port {
|
||||
mini_dp_con_in: endpoint {
|
||||
remote-endpoint = <&sn65dsi86_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
reg_1p2v: regulator-1p2v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.2V";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sn65dsi86_refclk: clk-x6 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <38400000>;
|
||||
};
|
||||
};
|
||||
|
||||
&avb0 {
|
||||
pinctrl-0 = <&avb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy-handle = <&phy0>;
|
||||
tx-internal-delay-ps = <2000>;
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id0022.1622",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
rxc-skew-ps = <1500>;
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio7>;
|
||||
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
dsi0_out: endpoint {
|
||||
remote-endpoint = <&sn65dsi86_in>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <16666666>;
|
||||
};
|
||||
|
||||
&extalr_clk {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&hscif0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
io_expander_a: gpio@20 {
|
||||
compatible = "onnn,pca9654";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "cpu-board";
|
||||
reg = <0x50>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
bridge@2c {
|
||||
compatible = "ti,sn65dsi86";
|
||||
reg = <0x2c>;
|
||||
|
||||
clocks = <&sn65dsi86_refclk>;
|
||||
clock-names = "refclk";
|
||||
|
||||
interrupt-parent = <&intc_ex>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
vccio-supply = <®_1p8v>;
|
||||
vpll-supply = <®_1p8v>;
|
||||
vcca-supply = <®_1p2v>;
|
||||
vcc-supply = <®_1p2v>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
sn65dsi86_in: endpoint {
|
||||
remote-endpoint = <&dsi0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
sn65dsi86_out: endpoint {
|
||||
remote-endpoint = <&mini_dp_con_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-0 = <&mmc_pins>;
|
||||
pinctrl-1 = <&mmc_pins>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
bus-width = <8>;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
full-pwr-cycle-in-suspend;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
avb0_pins: avb0 {
|
||||
mux {
|
||||
groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
|
||||
"avb0_txcrefclk";
|
||||
function = "avb0";
|
||||
};
|
||||
|
||||
pins_mdio {
|
||||
groups = "avb0_mdio";
|
||||
drive-strength = <21>;
|
||||
};
|
||||
|
||||
pins_mii {
|
||||
groups = "avb0_rgmii";
|
||||
drive-strength = <21>;
|
||||
};
|
||||
|
||||
};
|
||||
hscif0_pins: hscif0 {
|
||||
groups = "hscif0_data";
|
||||
function = "hscif0";
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0 {
|
||||
groups = "i2c0";
|
||||
function = "i2c0";
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
groups = "i2c1";
|
||||
function = "i2c1";
|
||||
};
|
||||
|
||||
keys_pins: keys {
|
||||
pins = "GP_5_0", "GP_5_1", "GP_5_2";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mmc_pins: mmc {
|
||||
groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
|
||||
function = "mmc";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
qspi0_pins: qspi0 {
|
||||
groups = "qspi0_ctrl", "qspi0_data4";
|
||||
function = "qspi0";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
};
|
||||
|
||||
&rpc {
|
||||
pinctrl-0 = <&qspi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fs512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
boot@0 {
|
||||
reg = <0x0 0x1200000>;
|
||||
read-only;
|
||||
};
|
||||
user@1200000 {
|
||||
reg = <0x1200000 0x2e00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rwdt {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
@@ -1,187 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
/*
|
||||
* Device Tree Source for the R-Car V4H White Hawk CSI/DSI sub-board
|
||||
*
|
||||
* Copyright (C) 2022 Glider bv
|
||||
*/
|
||||
|
||||
#include <dt-bindings/media/video-interfaces.h>
|
||||
|
||||
&csi40 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
csi40_in: endpoint {
|
||||
bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3>;
|
||||
remote-endpoint = <&max96712_out0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&csi41 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
csi41_in: endpoint {
|
||||
bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3>;
|
||||
remote-endpoint = <&max96712_out1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pca9654_a: gpio@21 {
|
||||
compatible = "onnn,pca9654";
|
||||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
pca9654_b: gpio@22 {
|
||||
compatible = "onnn,pca9654";
|
||||
reg = <0x22>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
eeprom@52 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "csi-dsi-sub-board-id";
|
||||
reg = <0x52>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
gmsl0: gmsl-deserializer@49 {
|
||||
compatible = "maxim,max96712";
|
||||
reg = <0x49>;
|
||||
enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
max96712_out0: endpoint {
|
||||
bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3>;
|
||||
remote-endpoint = <&csi40_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gmsl1: gmsl-deserializer@4b {
|
||||
compatible = "maxim,max96712";
|
||||
reg = <0x4b>;
|
||||
enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
max96712_out1: endpoint {
|
||||
bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
|
||||
clock-lanes = <0>;
|
||||
data-lanes = <1 2 3>;
|
||||
remote-endpoint = <&csi41_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&isp0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&isp1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin01 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin02 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin03 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin04 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin05 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin06 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin07 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin08 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin09 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin12 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin13 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin14 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vin15 {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -1,16 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
/*
|
||||
* Device Tree Source for the R-Car V4H White Hawk RAVB/Ethernet(1000Base-T1)
|
||||
* sub-board
|
||||
*
|
||||
* Copyright (C) 2022 Glider bv
|
||||
*/
|
||||
|
||||
&i2c0 {
|
||||
eeprom@53 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "ethernet-sub-board-id";
|
||||
reg = <0x53>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
@@ -1,69 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
/*
|
||||
* Device Tree Source for the White Hawk CPU and BreakOut boards
|
||||
*
|
||||
* Copyright (C) 2022 Renesas Electronics Corp.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a779g0-white-hawk-cpu.dtsi"
|
||||
#include "r8a779g0-white-hawk-csi-dsi.dtsi"
|
||||
#include "r8a779g0-white-hawk-ethernet.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0";
|
||||
compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0";
|
||||
|
||||
can_transceiver0: can-phy0 {
|
||||
compatible = "nxp,tjr1443";
|
||||
#phy-cells = <0>;
|
||||
enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
|
||||
max-bitrate = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&can_clk {
|
||||
clock-frequency = <40000000>;
|
||||
};
|
||||
|
||||
&canfd {
|
||||
pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
channel0 {
|
||||
status = "okay";
|
||||
phys = <&can_transceiver0>;
|
||||
};
|
||||
|
||||
channel1 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
eeprom@51 {
|
||||
compatible = "rohm,br24g01", "atmel,24c01";
|
||||
label = "breakout-board";
|
||||
reg = <0x51>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&pfc {
|
||||
can_clk_pins: can-clk {
|
||||
groups = "can_clk";
|
||||
function = "can_clk";
|
||||
};
|
||||
|
||||
canfd0_pins: canfd0 {
|
||||
groups = "canfd0_data";
|
||||
function = "canfd0";
|
||||
};
|
||||
|
||||
canfd1_pins: canfd1 {
|
||||
groups = "canfd1_data";
|
||||
function = "canfd1";
|
||||
};
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user