Mirrors/u-boot
1
0
Fork 0
mirror of https://source.denx.de/u-boot/u-boot.git synced 2026-06-13 15:03:58 +03:00
Code Issues Packages Projects Releases Wiki Activity

board: phytec: phycore-imx93: Switch to standard boot

Browse Source 
Enable standard boot for the phyCORE-i.MX93 board and use it as a new
default. Add required standard boot variables to the environment, while
removing old boot scripts and now unnecessary environment variables.
Adjust variables according to the requirements of PHYTEC ampliphy-boot
distro-boot. Last but not least, order environment vars by alphabet and
run 'make savedefconfig' to resync defconfig.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
This commit is contained in:
Primoz Fiser
2025-12-05 12:10:42 +01:00
committed by Fabio Estevam
parent 3a686ef149
commit 2d964cb725
3 changed files with 30 additions and 64 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
View File

@@ -30,6 +30,22 @@
ethernet1 = &eqos;
};
bootstd {
bootph-verify;
compatible = "u-boot,boot-std";
filename-prefixes = "/", "/boot/";
bootdev-order = "mmc0", "mmc1", "ethernet";
rauc {
compatible = "u-boot,distro-rauc";
};
script {
compatible = "u-boot,script";
};
};
firmware {
optee {
compatible = "linaro,optee-tz";

68
board/phytec/phycore_imx93/phycore_imx93.env
View File

@@ -1,70 +1,12 @@
/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
#include <env/phytec/rauc.env>
#include <env/phytec/overlays.env>
bootcmd=
mmc dev ${mmcdev};
if mmc rescan; then
if test ${doraucboot} = 1; then
run raucinit;
fi;
if run loadimage; then
run mmcboot;
else
run netboot;
fi;
fi;
image=Image
boot_script_dhcp=net_boot_fit.scr.uimg
console=ttyLP0
fdt_addr_r=0x90000000
fdtoverlay_addr_r=0x900c0000
bootenv_addr_r=0x90500000
fdtfile=CONFIG_DEFAULT_FDT_FILE
fdtoverlay_addr_r=0x900c0000
ip_dyn=yes
kernel_addr_r=0x88000000
nfsroot=/srv/nfs
prepare_mcore=setenv optargs "${optargs} clk-imx93.mcore_booted"
mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX
mmcpart=1
mmcroot=2
mmcautodetect=yes
mmcargs=setenv bootargs console=${console},${baudrate} earlycon
root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw ${optargs}
loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
mmcboot=
echo Booting from mmc ...;
if test ${no_bootenv} = 0; then
if run mmc_load_bootenv; then
env import -t ${bootenv_addr_r} ${filesize};
fi;
fi;
run mmcargs;
if run loadfdt; then
run mmc_apply_overlays;
booti ${loadaddr} - ${fdt_addr_r};
else
echo WARN: Cannot load the DT;
fi;
nfsroot=/nfs
netargs=setenv bootargs console=${console},${baudrate} earlycon
root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp ${optargs}
netboot=
echo Booting from net ...;
run netargs;
if test ${ip_dyn} = yes; then
setenv get_cmd dhcp;
else
setenv get_cmd tftp;
fi;
if test ${no_bootenv} = 0; then
if run net_load_bootenv; then
env import -t ${bootenv_addr_r} ${filesize};
fi;
fi;
${get_cmd} ${loadaddr} ${image};
if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then
run net_apply_overlays;
booti ${loadaddr} - ${fdt_addr_r};
else
echo WARN: Cannot load the DT;
fi;
scriptaddr=0x83500000

10
configs/imx93-phycore_defconfig
View File

@@ -5,10 +5,10 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_SYS_MALLOC_F_LEN=0x20000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ENV_SOURCE_FILE="phycore_imx93"
CONFIG_NR_DRAM_BANKS=2
CONFIG_PHYTEC_SOM_DETECTION=y
CONFIG_PHYTEC_EEPROM_BUS=2
CONFIG_ENV_SOURCE_FILE="phycore_imx93"
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x700000
CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
@@ -33,6 +33,9 @@ CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0x90000000
CONFIG_REMAKE_ELF=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTSTD_FULL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_DEFAULT_FDT_FILE="oftree"
@@ -52,6 +55,9 @@ CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_PROMPT="u-boot=> "
# CONFIG_CMD_BOOTDEV is not set
# CONFIG_CMD_BOOTMETH is not set
# CONFIG_CMD_BOOTSTD is not set
CONFIG_CMD_ERASEENV=y
CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CRC32_VERIFY=y
@@ -149,5 +155,7 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9
CONFIG_USB_GADGET_PRODUCT_NUM=0x0152
CONFIG_CI_UDC=y
CONFIG_ULP_WATCHDOG=y
# CONFIG_RSA is not set
# CONFIG_SPL_SHA256 is not set
CONFIG_LZO=y
CONFIG_BZIP2=y