mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 15:03:58 +03:00
board: adi: Add support for SC573-ezkit
This adds support for the Analog Devices SC573 EZKIT. Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com> Signed-off-by: Philip Molloy <philip.molloy@analog.com> Signed-off-by: Greg Malysa <malysagreg@gmail.com>
This commit is contained in:
Greg Malysa
@@ -5,9 +5,249 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sc5xx.dtsi"
|
||||
#include "sc57x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ADI SC573-EZKIT";
|
||||
compatible = "adi,sc573-ezkit", "adi,sc57x";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
gpio_expander1: mcp23017@21 {
|
||||
compatible = "microchip,mcp23017";
|
||||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
bootph-pre-ram;
|
||||
|
||||
eeprom {
|
||||
gpio-hog;
|
||||
gpios = <0 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "eeprom-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
uart0-flow-en {
|
||||
gpio-hog;
|
||||
gpios = <1 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "uart0-flow-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
mlb {
|
||||
gpio-hog;
|
||||
gpios = <5 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "mlb-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
can0 {
|
||||
gpio-hog;
|
||||
gpios = <6 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "can0-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
can1 {
|
||||
gpio-hog;
|
||||
gpios = <7 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "can1-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
adau1962 {
|
||||
gpio-hog;
|
||||
gpios = <8 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "adau1962-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
adau1979 {
|
||||
gpio-hog;
|
||||
gpios = <9 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "adau1979-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
sd-wp-en {
|
||||
gpio-hog;
|
||||
gpios = <11 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "sd-wp-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
spi2flash-cs {
|
||||
gpio-hog;
|
||||
gpios = <12 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "spi2flash-cs";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
spi2d2-d3 {
|
||||
gpio-hog;
|
||||
gpios = <13 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "spi2d2-d3-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
spdif-opt {
|
||||
gpio-hog;
|
||||
gpios = <14 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "spdif-optical-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
spdif-dig {
|
||||
gpio-hog;
|
||||
gpios = <15 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "spdif-digital-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_expander2: mcp23017@22 {
|
||||
compatible = "microchip,mcp23017";
|
||||
reg = <0x22>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
bootph-pre-ram;
|
||||
|
||||
pushbutton3 {
|
||||
gpio-hog;
|
||||
gpios = <0 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "pushbutton3-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
pushbutton2 {
|
||||
gpio-hog;
|
||||
gpios = <1 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "pushbutton2-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
pushbutton1 {
|
||||
gpio-hog;
|
||||
gpios = <2 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "pushbutton1-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
leds {
|
||||
gpio-hog;
|
||||
gpios = <3 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "leds-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
flg0 {
|
||||
gpio-hog;
|
||||
gpios = <4 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "flg0_loop";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
flg1 {
|
||||
gpio-hog;
|
||||
gpios = <5 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "flg1_loop";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
flg2 {
|
||||
gpio-hog;
|
||||
gpios = <6 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "flg2_loop";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
flg3 {
|
||||
gpio-hog;
|
||||
gpios = <7 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "flg3_loop";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
adau1977 {
|
||||
gpio-hog;
|
||||
gpios = <8 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "adau1977_en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
adau1977_fault_rst {
|
||||
gpio-hog;
|
||||
gpios = <9 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "adau1977_fault_rst_en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
thumbwheel {
|
||||
gpio-hog;
|
||||
gpios = <10 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "thumbwheel_oe";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
engine_rpm {
|
||||
gpio-hog;
|
||||
gpios = <11 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "engine_rpm_oe";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
snps,reset-gpio = <&gpio0 ADI_ADSP_PIN('A', 5) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
emac0_phy_pwdn {
|
||||
gpio-hog;
|
||||
output-high;
|
||||
gpios = <ADI_ADSP_PIN('A', 4) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
flash1: is25lp512@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor", "is25lp512";
|
||||
reg = <1>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-max-frequency = <10000000>;
|
||||
bootph-pre-ram;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -3,19 +3,134 @@
|
||||
* (C) Copyright 2024 - Analog Devices, Inc.
|
||||
*/
|
||||
|
||||
#include "sc5xx.dtsi"
|
||||
|
||||
/ {
|
||||
gic: interrupt-controller@310b2000 {
|
||||
compatible = "arm,cortex-a5-gic";
|
||||
gic: interrupt-controller@310B2000 {
|
||||
compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
interrupt-controller;
|
||||
reg = <0x310B2000 0x1000>,
|
||||
<0x310B4000 0x100>;
|
||||
};
|
||||
|
||||
soc {
|
||||
mmc: mmc0@31010000 {
|
||||
compatible = "snps,dw-mshc";
|
||||
reg = <0x31010000 0x400>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc_default>;
|
||||
bus-width = <4>;
|
||||
fifo-depth = <128>;
|
||||
clock-names = "biu", "ciu";
|
||||
max-frequency = <52000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb0: musb@310c1000 {
|
||||
compatible = "adi,sc5xx-musb";
|
||||
reg = <0x310c1000 0x390>;
|
||||
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "mc", "dma";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
&timer0 {
|
||||
clocks = <&clk ADSP_SC57X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
&pinctrl0 {
|
||||
mmc_default: mmc_pins {
|
||||
adi,pins = <ADI_ADSP_PIN('E', 12) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('E', 13) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('E', 14) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('E', 15) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 0) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 1) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 2) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 3) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 4) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 7) ADI_ADSP_PINFUNC_ALT2>,
|
||||
<ADI_ADSP_PIN('C', 12) ADI_ADSP_PINFUNC_ALT1>;
|
||||
};
|
||||
|
||||
eth0_default: eth0_pins {
|
||||
adi,pins = <ADI_ADSP_PIN('B', 7) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 8) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 6) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 5) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 13) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 12) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 14) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 15) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 9) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 4) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 0) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 2) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 10) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 11) ADI_ADSP_PINFUNC_ALT0>;
|
||||
};
|
||||
|
||||
uart0_default: uart0_pins {
|
||||
bootph-pre-ram;
|
||||
adi,pins = <ADI_ADSP_PIN('F', 8) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 9) ADI_ADSP_PINFUNC_ALT0>;
|
||||
};
|
||||
|
||||
spi2_default: spi2_pins {
|
||||
adi,pins = <ADI_ADSP_PIN('B', 14) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 10) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 11) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 12) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 13) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('B', 15) ADI_ADSP_PINFUNC_ALT0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl0 {
|
||||
adi,npins = <92>;
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
adi,ngpios = <92>;
|
||||
};
|
||||
|
||||
&clk {
|
||||
compatible = "adi,sc57x-clocks";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
clocks = <&clk ADSP_SC57X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
clocks = <&clk ADSP_SC57X_CLK_CGU0_SCLK1>;
|
||||
reg = <0x31044000 0x1000>;
|
||||
};
|
||||
|
||||
&wdog {
|
||||
clocks = <&clk ADSP_SC57X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
ð0 {
|
||||
reg = <0x3100C000 0x1000>;
|
||||
};
|
||||
|
||||
&mmc {
|
||||
clocks = <&dummy>, <&clk ADSP_SC57X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clocks = <&clk ADSP_SC57X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clocks = <&clk ADSP_SC57X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clocks = <&clk ADSP_SC57X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
@@ -100,7 +100,81 @@
|
||||
clocks = <&sys_clkin0>, <&sys_clkin1>;
|
||||
clock-names = "sys_clkin0", "sys_clkin1";
|
||||
status = "okay";
|
||||
bootph-all;
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
uart0: serial@0x31003000 {
|
||||
compatible = "adi,uart4";
|
||||
reg = <0x31003000 0x1000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_default>;
|
||||
clock-names = "sclk0";
|
||||
status = "okay";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
spi2: spi2 {
|
||||
compatible = "adi,spi3";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_default>;
|
||||
bus-num = <2>;
|
||||
spi-max-frequency = <10000000>;
|
||||
clock-names = "spi";
|
||||
status = "okay";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
wdog: watchdog@31008000 {
|
||||
compatible = "adi,wdt";
|
||||
reg = <0x3108c000 0x1000>,
|
||||
<0x31089000 0x1000>,
|
||||
<0x31008000 0x1000>;
|
||||
reg-names = "rcu", "sec", "wdt";
|
||||
clock-names = "sclk0";
|
||||
status = "disabled";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
eth0: eth0 {
|
||||
compatible = "snps,arc-dwmac-3.70a";
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ð0_default>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <1000 1000 1000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c0@31001400 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "adi-i2c";
|
||||
reg = <0x31001400 0x1000>;
|
||||
clock-names = "i2c";
|
||||
status = "okay";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
i2c1: i2c1@31001500 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "adi-i2c";
|
||||
reg = <0x31001500 0x1000>;
|
||||
clock-names = "i2c";
|
||||
status = "okay";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
i2c2: i2c2@31001600 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "adi-i2c";
|
||||
reg = <0x31001600 0x1000>;
|
||||
clock-names = "i2c";
|
||||
status = "okay";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
6
board/adi/sc573-ezkit/Makefile
Normal file
6
board/adi/sc573-ezkit/Makefile
Normal file
@@ -0,0 +1,6 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#
|
||||
# (C) Copyright 2025 - Analog Devices, Inc.
|
||||
#
|
||||
|
||||
obj-y += sc573-ezkit.o
|
||||
21
board/adi/sc573-ezkit/sc573-ezkit.c
Normal file
21
board/adi/sc573-ezkit/sc573-ezkit.c
Normal file
@@ -0,0 +1,21 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* (C) Copyright 2025 - Analog Devices, Inc.
|
||||
*/
|
||||
|
||||
#include <phy.h>
|
||||
#include <asm/u-boot.h>
|
||||
#include <asm/arch-adi/sc5xx/sc5xx.h>
|
||||
#include <asm/arch-adi/sc5xx/soc.h>
|
||||
|
||||
int board_phy_config(struct phy_device *phydev)
|
||||
{
|
||||
fixup_dp83867_phy(phydev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
sc5xx_enable_rgmii();
|
||||
return 0;
|
||||
}
|
||||
@@ -1,13 +1,17 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0-or-later+ */
|
||||
|
||||
/*
|
||||
* (C) Copyright 2024 - Analog Devices, Inc.
|
||||
*/
|
||||
|
||||
#include <env/adi/adi_boot.env>
|
||||
|
||||
adi_stage2_offset=0x20000
|
||||
adi_image_offset=0xE0000
|
||||
adi_rfs_offset=0x6E0000
|
||||
loadaddr=0x83000000
|
||||
adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
|
||||
adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
|
||||
adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
|
||||
jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc573-ezkit.jffs2
|
||||
loadaddr=CONFIG_SC5XX_LOADADDR
|
||||
|
||||
#define USE_NFS
|
||||
#define USE_SPI
|
||||
#define USE_RAM
|
||||
#define USE_MMC
|
||||
|
||||
#include <env/adi/adi_boot.env>
|
||||
|
||||
90
configs/sc573-ezkit_defconfig
Normal file
90
configs/sc573-ezkit_defconfig
Normal file
@@ -0,0 +1,90 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_ARM_CACHE_WRITETHROUGH=y
|
||||
CONFIG_ARCH_SC5XX=y
|
||||
CONFIG_SYS_MALLOC_LEN=0x100000
|
||||
CONFIG_SPL_GPIO=y
|
||||
CONFIG_ENV_SIZE=0x4000
|
||||
CONFIG_ENV_OFFSET=0xD0000
|
||||
CONFIG_ENV_SECT_SIZE=0x4000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
|
||||
CONFIG_SC5XX_UBOOT_OFFSET=0x20000
|
||||
CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
|
||||
CONFIG_SC5XX_ROOTFS_OFFSET=0x6E0000
|
||||
CONFIG_SC5XX_LOADADDR=0x83000000
|
||||
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
|
||||
CONFIG_CGU0_CLKOUTSEL=7
|
||||
# CONFIG_EFI_LOADER is not set
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_SIGNATURE=y
|
||||
CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
CONFIG_BOOTCOMMAND="run ramboot"
|
||||
CONFIG_SYS_CBSIZE=512
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
CONFIG_SPL_I2C=y
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
# CONFIG_BOOTM_NETBSD is not set
|
||||
# CONFIG_BOOTM_PLAN9 is not set
|
||||
# CONFIG_BOOTM_RTEMS is not set
|
||||
# CONFIG_BOOTM_VXWORKS is not set
|
||||
# CONFIG_CMD_ELF is not set
|
||||
CONFIG_CMD_DM=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
# CONFIG_CMD_PINMUX is not set
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_SYS_DISABLE_AUTOLOAD=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_DNS=y
|
||||
CONFIG_CMD_MII=y
|
||||
# CONFIG_CMD_MDIO is not set
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_EMBED=y
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_USE_HOSTNAME=y
|
||||
CONFIG_HOSTNAME="sc573-ezkit"
|
||||
CONFIG_NET_RETRY_COUNT=20
|
||||
CONFIG_IP_DEFRAG=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_SPL_CLK_CCF=y
|
||||
CONFIG_GPIO_HOG=y
|
||||
CONFIG_SPL_GPIO_HOG=y
|
||||
CONFIG_DM_GPIO_LOOKUP_LABEL=y
|
||||
CONFIG_SPL_DM_GPIO_LOOKUP_LABEL=y
|
||||
CONFIG_MCP230XX_GPIO=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_DM_I2C_GPIO=y
|
||||
CONFIG_SYS_I2C_ADI=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_SNPS=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_DW_ALTDESCRIPTOR=y
|
||||
CONFIG_PINCTRL=y
|
||||
# CONFIG_PINCTRL_GENERIC is not set
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
# CONFIG_SPL_PINCTRL_GENERIC is not set
|
||||
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_ADI_SPI3=y
|
||||
CONFIG_SPL_TIMER=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_MUSB_HOST=y
|
||||
CONFIG_USB_MUSB_SC5XX=y
|
||||
CONFIG_USB_MUSB_PIO_ONLY=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_FAT_WRITE=y
|
||||
# CONFIG_REGEX is not set
|
||||
Reference in New Issue
Block a user