mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 15:03:58 +03:00
ARM: dts: Import Odroid-N2L support
Import Odroid-N2L support posted at [1] and merged for Linux v6.3-rc1. [1] https://lore.kernel.org/all/20230122-topic-odroid-n2l-upstream-initial-v2-0-8d3fea6d403d@linaro.org/ Link: https://lore.kernel.org/r/20230126-u-boot-odroid-n2l-v1-1-c60f695e0f6c@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This commit is contained in:
Neil Armstrong
@@ -200,6 +200,7 @@ dtb-$(CONFIG_ARCH_MESON) += \
|
||||
meson-g12b-gsking-x.dtb \
|
||||
meson-g12b-odroid-go-ultra.dtb \
|
||||
meson-g12b-odroid-n2.dtb \
|
||||
meson-g12b-odroid-n2l.dtb \
|
||||
meson-g12b-odroid-n2-plus.dtb \
|
||||
meson-sm1-bananapi-m5.dtb \
|
||||
meson-sm1-khadas-vim3l.dtb \
|
||||
|
||||
@@ -4,20 +4,14 @@
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
#include <dt-bindings/sound/meson-g12a-toacodec.h>
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
#include "meson-g12b-odroid.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
rtc0 = &rtc;
|
||||
rtc1 = &vrtc;
|
||||
};
|
||||
|
||||
dioo2133: audio-amplifier-0 {
|
||||
dio2133: audio-amplifier-0 {
|
||||
compatible = "simple-audio-amplifier";
|
||||
enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
|
||||
VCC-supply = <&vcc_5v>;
|
||||
@@ -25,139 +19,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-blue {
|
||||
label = "n2:blue";
|
||||
gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
tflash_vdd: regulator-tflash_vdd {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "TFLASH_VDD";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
tf_io: gpio-regulator-tf_io {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "TF_IO";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <0>;
|
||||
|
||||
states = <3300000 0>,
|
||||
<1800000 1>;
|
||||
};
|
||||
|
||||
flash_1v8: regulator-flash_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "FLASH_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
main_12v: regulator-main_12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "12V";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_5v: regulator-vcc_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&main_12v>;
|
||||
};
|
||||
|
||||
vcc_1v8: regulator-vcc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
/* FIXME: actually controlled by VDDCPU_B_EN */
|
||||
};
|
||||
|
||||
vddcpu_a: regulator-vddcpu-a {
|
||||
/*
|
||||
* MP8756GD Regulator.
|
||||
*/
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU_A";
|
||||
regulator-min-microvolt = <721000>;
|
||||
regulator-max-microvolt = <1022000>;
|
||||
|
||||
vin-supply = <&main_12v>;
|
||||
|
||||
pwms = <&pwm_ab 0 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddcpu_b: regulator-vddcpu-b {
|
||||
/*
|
||||
* Silergy SY8120B1ABC Regulator.
|
||||
*/
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU_B";
|
||||
regulator-min-microvolt = <721000>;
|
||||
regulator-max-microvolt = <1022000>;
|
||||
|
||||
vin-supply = <&main_12v>;
|
||||
|
||||
pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
hub_5v: regulator-hub_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "HUB_5V";
|
||||
@@ -170,54 +31,13 @@
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
usb_pwr_en: regulator-usb_pwr_en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "USB_PWR_EN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
|
||||
/* Connected to the microUSB port power enable */
|
||||
gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vddao_1v8: regulator-vddao_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&main_12v>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "ODROID-N2";
|
||||
audio-widgets = "Line", "Lineout";
|
||||
audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
|
||||
<&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
|
||||
<&dioo2133>;
|
||||
<&dio2133>;
|
||||
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
||||
@@ -344,68 +164,13 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&arb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
pinctrl-0 = <&cec_ao_a_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "disabled";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cecb_AO {
|
||||
pinctrl-0 = <&cec_ao_b_h_pins>;
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&clkc_audio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vddcpu_b>;
|
||||
operating-points-v2 = <&cpu_opp_table_0>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vddcpu_b>;
|
||||
operating-points-v2 = <&cpu_opp_table_0>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu100 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu101 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu102 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu103 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&external_phy>;
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
};
|
||||
|
||||
&ext_mdio {
|
||||
@@ -424,27 +189,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&external_phy>;
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
};
|
||||
|
||||
&frddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
gpio-line-names =
|
||||
/* GPIOZ */
|
||||
@@ -505,26 +249,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&vcc_5v>;
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
linux,rc-map-name = "rc-odroid";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
|
||||
@@ -537,62 +261,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pwm_ab {
|
||||
pinctrl-0 = <&pwm_a_e_pins>;
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin0";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddao_1v8>;
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&tflash_vdd>;
|
||||
vqmmc-supply = <&tf_io>;
|
||||
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&flash_1v8>;
|
||||
linux,rc-map-name = "rc-odroid";
|
||||
};
|
||||
|
||||
/*
|
||||
@@ -607,7 +280,7 @@
|
||||
pinctrl-0 = <&nor_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
mx25u64: spi-flash@0 {
|
||||
mx25u64: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
|
||||
@@ -616,73 +289,14 @@
|
||||
};
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmif_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmin_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmin_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmin_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmin_lb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toacodec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tohdmitx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
vbus-supply = <&usb_pwr_en>;
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
phy-supply = <&vcc_5v>;
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
/* Enable the hub which is connected to this port */
|
||||
phy-supply = <&hub_5v>;
|
||||
|
||||
125
arch/arm/dts/meson-g12b-odroid-n2l.dts
Normal file
125
arch/arm/dts/meson-g12b-odroid-n2l.dts
Normal file
@@ -0,0 +1,125 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Dongjin Kim <tobetter@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
|
||||
#include "meson-g12b-a311d.dtsi"
|
||||
#include "meson-g12b-odroid.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "hardkernel,odroid-n2l", "amlogic,s922x", "amlogic,g12b";
|
||||
model = "Hardkernel ODROID-N2L";
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "ODROID-N2L";
|
||||
audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>,
|
||||
<&tdmin_c>, <&tdmin_lb>;
|
||||
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
||||
"TDM_B Playback", "TDMOUT_B OUT",
|
||||
"TDMIN_A IN 4", "TDM_B Loopback",
|
||||
"TDMIN_B IN 4", "TDM_B Loopback",
|
||||
"TDMIN_C IN 4", "TDM_B Loopback",
|
||||
"TDMIN_LB IN 1", "TDM_B Loopback",
|
||||
"TODDR_A IN 0", "TDMIN_A OUT",
|
||||
"TODDR_B IN 0", "TDMIN_A OUT",
|
||||
"TODDR_C IN 0", "TDMIN_A OUT",
|
||||
"TODDR_A IN 1", "TDMIN_B OUT",
|
||||
"TODDR_B IN 1", "TDMIN_B OUT",
|
||||
"TODDR_C IN 1", "TDMIN_B OUT",
|
||||
"TODDR_A IN 2", "TDMIN_C OUT",
|
||||
"TODDR_B IN 2", "TDMIN_C OUT",
|
||||
"TODDR_C IN 2", "TDMIN_C OUT",
|
||||
"TODDR_A IN 6", "TDMIN_LB OUT",
|
||||
"TODDR_B IN 6", "TDMIN_LB OUT",
|
||||
"TODDR_C IN 6", "TDMIN_LB OUT";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_MPLL2>,
|
||||
<&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
status = "okay";
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&frddr_a>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&frddr_b>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&frddr_c>;
|
||||
};
|
||||
|
||||
dai-link-3 {
|
||||
sound-dai = <&toddr_a>;
|
||||
};
|
||||
|
||||
dai-link-4 {
|
||||
sound-dai = <&toddr_b>;
|
||||
};
|
||||
|
||||
dai-link-5 {
|
||||
sound-dai = <&toddr_c>;
|
||||
};
|
||||
|
||||
/* 8ch hdmi interface */
|
||||
dai-link-6 {
|
||||
sound-dai = <&tdmif_b>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-1 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-2 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-3 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
|
||||
};
|
||||
};
|
||||
|
||||
/* hdmi glue */
|
||||
dai-link-7 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð_phy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&vddcpu_a {
|
||||
regulator-min-microvolt = <680000>;
|
||||
regulator-max-microvolt = <1040000>;
|
||||
|
||||
pwms = <&pwm_ab 0 1500 0>;
|
||||
};
|
||||
|
||||
&vddcpu_b {
|
||||
regulator-min-microvolt = <680000>;
|
||||
regulator-max-microvolt = <1040000>;
|
||||
|
||||
pwms = <&pwm_AO_cd 1 1500 0>;
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
phy-supply = <&usb_pwr_en>;
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
phy-supply = <&usb_pwr_en>;
|
||||
};
|
||||
445
arch/arm/dts/meson-g12b-odroid.dtsi
Normal file
445
arch/arm/dts/meson-g12b-odroid.dtsi
Normal file
@@ -0,0 +1,445 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
#include <dt-bindings/sound/meson-g12a-toacodec.h>
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
rtc1 = &vrtc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
fan: gpio-fan {
|
||||
compatible = "gpio-fan";
|
||||
gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
|
||||
/* Using Dummy Speed */
|
||||
gpio-fan,speed-map = <0 0>, <1 1>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-blue {
|
||||
label = "n2:blue";
|
||||
gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
tflash_vdd: regulator-tflash_vdd {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "TFLASH_VDD";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
tf_io: gpio-regulator-tf_io {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "TF_IO";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <0>;
|
||||
|
||||
states = <3300000 0>,
|
||||
<1800000 1>;
|
||||
};
|
||||
|
||||
flash_1v8: regulator-flash_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "FLASH_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
main_12v: regulator-main_12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "12V";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
usb_pwr_en: regulator-usb_pwr_en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "USB_PWR_EN";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_5v>;
|
||||
|
||||
/* Connected to the microUSB port power enable */
|
||||
gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vcc_5v: regulator-vcc_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&main_12v>;
|
||||
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vcc_1v8: regulator-vcc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
/* FIXME: actually controlled by VDDCPU_B_EN */
|
||||
};
|
||||
|
||||
vddcpu_a: regulator-vddcpu-a {
|
||||
/*
|
||||
* MP8756GD Regulator.
|
||||
*/
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU_A";
|
||||
regulator-min-microvolt = <721000>;
|
||||
regulator-max-microvolt = <1022000>;
|
||||
|
||||
pwm-supply = <&main_12v>;
|
||||
|
||||
pwms = <&pwm_ab 0 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddcpu_b: regulator-vddcpu-b {
|
||||
/*
|
||||
* Silergy SY8120B1ABC Regulator.
|
||||
*/
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU_B";
|
||||
regulator-min-microvolt = <721000>;
|
||||
regulator-max-microvolt = <1022000>;
|
||||
|
||||
pwm-supply = <&main_12v>;
|
||||
|
||||
pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_1v8: regulator-vddao_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&main_12v>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&arb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
pinctrl-0 = <&cec_ao_a_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "disabled";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cecb_AO {
|
||||
pinctrl-0 = <&cec_ao_b_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&clkc_audio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vddcpu_b>;
|
||||
operating-points-v2 = <&cpu_opp_table_0>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vddcpu_b>;
|
||||
operating-points-v2 = <&cpu_opp_table_0>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu100 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu101 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu102 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu103 {
|
||||
cpu-supply = <&vddcpu_a>;
|
||||
operating-points-v2 = <&cpub_opp_table_1>;
|
||||
clocks = <&clkc CLKID_CPUB_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu_thermal {
|
||||
trips {
|
||||
cpu_active: cpu-active {
|
||||
temperature = <60000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map {
|
||||
trip = <&cpu_active>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ddr_thermal {
|
||||
trips {
|
||||
ddr_active: ddr-active {
|
||||
temperature = <60000>; /* millicelsius */
|
||||
hysteresis = <2000>; /* millicelsius */
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map {
|
||||
trip = <&ddr_active>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&frddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&vcc_5v>;
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm_ab {
|
||||
pinctrl-0 = <&pwm_a_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin0";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddao_1v8>;
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&tflash_vdd>;
|
||||
vqmmc-supply = <&tf_io>;
|
||||
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&flash_1v8>;
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmif_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmin_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmin_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmin_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmin_lb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tohdmitx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&toddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
phy-supply = <&vcc_5v>;
|
||||
};
|
||||
Reference in New Issue
Block a user