Mirrors/u-boot
1
0
Fork 0
mirror of https://source.denx.de/u-boot/u-boot.git synced 2026-06-13 15:03:58 +03:00
Code Issues Packages Projects Releases Wiki Activity

rockchip: rk3399-pinebook-pro: Sync DT from v6.8 and update defconfig

Browse Source 
Sync rk3399-pinebook-pro device tree from Linux kernel v6.8.

Add SF_DEFAULT_SPEED=10000000 and SPI_FLASH_SFDP_SUPPORT=y to improve
support for booting from SPI flash.

Add CMD_POWEROFF=y to support poweroff using cmdline and power on using
the pwr button on the board.

Remove SPL_TINY_MEMSET=y to use full memset in SPL.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jonas Karlman
2024-05-01 16:22:37 +00:00
committed by Kever Yang
parent 40bb3089bc
commit 5a1aa36ddf
2 changed files with 11 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files

24
arch/arm/dts/rk3399-pinebook-pro.dts
View File

@@ -50,19 +50,9 @@
pinctrl-0 = <&panel_en_pin>;
power-supply = <&vcc3v3_panel>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
panel_in_edp: endpoint@0 {
reg = <0>;
remote-endpoint = <&edp_out_panel>;
};
port {
panel_in_edp: endpoint {
remote-endpoint = <&edp_out_panel>;
};
};
};
@@ -76,7 +66,7 @@
pinctrl-names = "default";
pinctrl-0 = <&lidbtn_pin>;
lid {
switch-lid {
debounce-interval = <20>;
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
label = "Lid";
@@ -92,7 +82,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn_pin>;
power {
key-power {
debounce-interval = <20>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "Power";
@@ -675,7 +665,7 @@
i2c-scl-rising-time-ns = <168>;
status = "okay";
es8316: es8316@11 {
es8316: audio-codec@11 {
compatible = "everest,es8316";
reg = <0x11>;
clocks = <&cru SCLK_I2S_8CH_OUT>;
@@ -943,7 +933,7 @@
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
sd-uhs-sdr104;
sd-uhs-sdr50;
vmmc-supply = <&vcc3v0_sd>;
vqmmc-supply = <&vcc_sdio>;
status = "okay";

6
configs/pinebook-pro-rk3399_defconfig
View File

@@ -4,7 +4,7 @@ CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_ENV_SIZE=0x8000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
@@ -36,6 +36,7 @@ CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
CONFIG_CMD_POWEROFF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
@@ -64,7 +65,9 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_SILICONKAISER=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_NVME_PCI=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
@@ -98,5 +101,4 @@ CONFIG_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_ROCKCHIP=y
CONFIG_DISPLAY_ROCKCHIP_EDP=y
CONFIG_SPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y