Mirrors/u-boot
1
0
Fork 0
mirror of https://source.denx.de/u-boot/u-boot.git synced 2026-06-02 01:36:37 +03:00
Code Issues Packages Projects Releases Wiki Activity

mmc: bcmstb: Fix non-removable check in bcm2712 init

Browse Source 
sdhci_brcmstb_init_2712() reads host->mmc->host_caps to decide whether
to force card-detect for a non-removable eMMC, or to route the CD signal
for a removable SD card. At the time this function runs from
sdhci_bcmstb_probe(), however, host->mmc->host_caps is still zero, that
field is only populated later by the MMC uclass, after the driver's
probe returns. mmc_of_parse() has already filled plat->cfg.host_caps
from the device tree by this point, so check that field instead.

Without the fix, every BCM2712 SDHCI instance takes the else branch and
writes SDIO_CFG_SD_PIN_SEL = SDIO_CFG_SD_PIN_SEL_CARD (0x02), including
the non-removable eMMC on boards such as CM5 on Home Assistant Yellow.
The SDIO_CFG block lies outside the SDHCI core's reset scope, so this
value persists across SDHCI_RESET_ALL into the next stage. On the
BCM2712, having SD_PIN_SEL set to "SD" when the Linux kernel performs
its first set_power(MMC_POWER_UP) write racily prevents the SDHCI
POWER_ON bit from latching (see [1] for the whole backstory) - the
voltage bits stick but POWER_ON drops - which wedges the first CMD0 the
full 10 s software timeout. On Home Assistant Yellow this manifested as
a ~20 s eMMC probe delay on roughly one in two Linux boots when U-Boot
was the previous stage. Booting directly from the Pi firmware (no U-Boot
in between) left SD_PIN_SEL at its default and did not exhibit the race.

Reading plat->cfg.host_caps lets init_2712 see the "non-removable"
property and take the correct branch, leaving SD_PIN_SEL untouched for
the eMMC.

[1] https://github.com/home-assistant/operating-system/pull/3700#issuecomment-4430229511

Fixes: 10127cdbab ("mmc: bcmstb: Add support for bcm2712 SD controller")
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Reviewed-by: Ivan T. Ivanov <iivanov@suse.de>
This commit is contained in:
Jan Čermák
2026-05-12 14:24:35 +02:00
committed by Peter Robinson
parent 29c7796a71
commit 8de24e226d
1 changed files with 3 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/mmc/bcmstb_sdhci.c
View File

@@ -56,7 +56,7 @@ struct sdhci_brcmstb_dev_priv {
static int sdhci_brcmstb_init_2712(struct udevice *dev)
{
struct sdhci_host *host = dev_get_priv(dev);
struct sdhci_bcmstb_plat *plat = dev_get_plat(dev);
void *cfg_regs;
u32 reg;
@@ -65,8 +65,8 @@ static int sdhci_brcmstb_init_2712(struct udevice *dev)
if (!cfg_regs)
return -ENOENT;
if ((host->mmc->host_caps & MMC_CAP_NONREMOVABLE) ||
(host->mmc->host_caps & MMC_CAP_NEEDS_POLL)) {
if ((plat->cfg.host_caps & MMC_CAP_NONREMOVABLE) ||
(plat->cfg.host_caps & MMC_CAP_NEEDS_POLL)) {
/* Force presence */
reg = readl(cfg_regs + SDIO_CFG_CTRL);
reg &= ~SDIO_CFG_CTRL_SDCD_N_TEST_LEV;