mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 15:03:58 +03:00
dts: meson-gxbb: Drop redundant devicetree files
Since meson-gxbb based boards switched to using upstream DT, so drop redundant files from arch/arm/dts directory. Only *-u-boot.dtsi files kept in arch/arm/dts directory for these boards. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
This commit is contained in:
Sumit Garg
@@ -216,14 +216,6 @@ dtb-$(CONFIG_ARCH_MESON) += \
|
||||
meson-a1-ad401.dtb \
|
||||
meson-axg-s400.dtb \
|
||||
meson-axg-jethome-jethub-j100.dtb \
|
||||
meson-gxbb-kii-pro.dtb \
|
||||
meson-gxbb-nanopi-k2.dtb \
|
||||
meson-gxbb-odroidc2.dtb \
|
||||
meson-gxbb-nanopi-k2.dtb \
|
||||
meson-gxbb-p200.dtb \
|
||||
meson-gxbb-p201.dtb \
|
||||
meson-gxbb-wetek-hub.dtb \
|
||||
meson-gxbb-wetek-play2.dtb \
|
||||
meson-gxl-s805x-libretech-ac.dtb \
|
||||
meson-gxl-s905d-libretech-pc.dtb \
|
||||
meson-gxl-s905w-jethome-jethub-j80.dtb \
|
||||
|
||||
@@ -1,140 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxbb-p20x.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/sound/meson-aiu.h>
|
||||
|
||||
/ {
|
||||
compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
|
||||
model = "Videostrong KII Pro";
|
||||
|
||||
spdif_dit: audio-codec-0 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "linux,spdif-dit";
|
||||
status = "okay";
|
||||
sound-name-prefix = "DIT";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led {
|
||||
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,gx-sound-card";
|
||||
model = "KII-PRO";
|
||||
assigned-clocks = <&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>,
|
||||
<&clkc CLKID_MPLL2>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-3 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&spdif_dit>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-4 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&aiu {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&spdif_out_y_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ð_rmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <ð_phy0>;
|
||||
phy-mode = "rmii";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
eth_phy0: ethernet-phy@0 {
|
||||
/* IC Plus IP101GR (0x02430c54) */
|
||||
reg = <0>;
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <10000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
linux,rc-map-name = "rc-videostrong-kii-pro";
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4335a0";
|
||||
shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <2000000>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "lpo";
|
||||
};
|
||||
};
|
||||
@@ -1,426 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2017 Andreas Färber
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxbb.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/sound/meson-aiu.h>
|
||||
|
||||
/ {
|
||||
compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
|
||||
model = "FriendlyARM NanoPi K2";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-stat {
|
||||
label = "nanopi-k2:blue:stat";
|
||||
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_5v: regulator-vdd-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDD_5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vddio_ao18: regulator-vddio-ao18 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddio_ao3v3: regulator-vddio-ao3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vddio_tf: regulator-vddio-tf {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "VDDIO_TF";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <0>;
|
||||
|
||||
states = <3300000 0>,
|
||||
<1800000 1>;
|
||||
|
||||
regulator-settling-time-up-us = <100>;
|
||||
regulator-settling-time-down-us = <5000>;
|
||||
};
|
||||
|
||||
wifi_32k: wifi-32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi_32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
vcc1v8: regulator-vcc1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vcc3v3: regulator-vcc3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* CVBS is available on CON1 pin 36, disabled by default */
|
||||
cvbs-connector {
|
||||
compatible = "composite-video-connector";
|
||||
status = "disabled";
|
||||
|
||||
port {
|
||||
cvbs_connector_in: endpoint {
|
||||
remote-endpoint = <&cvbs_vdac_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,gx-sound-card";
|
||||
model = "NANOPI-K2";
|
||||
assigned-clocks = <&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>,
|
||||
<&clkc CLKID_MPLL2>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
status = "okay";
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&aiu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ao_cec_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cvbs_vdac_port {
|
||||
cvbs_vdac_out: endpoint {
|
||||
remote-endpoint = <&cvbs_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <ð_phy0>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
eth_phy0: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <80000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_15 */
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&gpio_ao {
|
||||
gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
|
||||
"VCCK En", "CON1 Header Pin31",
|
||||
"I2S Header Pin6", "IR In", "I2S Header Pin7",
|
||||
"I2S Header Pin3", "I2S Header Pin4",
|
||||
"I2S Header Pin5", "HDMI CEC", "SYS LED",
|
||||
/* GPIO_TEST_N */
|
||||
"";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
gpio-line-names = /* Bank GPIOZ */
|
||||
"Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
|
||||
"Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
|
||||
"Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
|
||||
"Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
|
||||
"Eth PHY nRESET", "Eth PHY Intc",
|
||||
/* Bank GPIOH */
|
||||
"HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL",
|
||||
"CON1 Header Pin33",
|
||||
/* Bank BOOT */
|
||||
"eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
|
||||
"eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
|
||||
"eMMC Reset", "eMMC CMD",
|
||||
"", "", "", "", "eMMC DS",
|
||||
"", "",
|
||||
/* Bank CARD */
|
||||
"SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
|
||||
"SDCard D3", "SDCard D2", "SDCard Det",
|
||||
/* Bank GPIODV */
|
||||
"", "", "", "", "", "", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "", "", "", "", "", "",
|
||||
"I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
|
||||
"VDDEE Regulator", "VCCK Regulator",
|
||||
/* Bank GPIOY */
|
||||
"CON1 Header Pin7", "CON1 Header Pin11",
|
||||
"CON1 Header Pin13", "CON1 Header Pin15",
|
||||
"CON1 Header Pin18", "CON1 Header Pin19",
|
||||
"CON1 Header Pin22", "CON1 Header Pin21",
|
||||
"CON1 Header Pin24", "CON1 Header Pin23",
|
||||
"CON1 Header Pin26", "CON1 Header Pin29",
|
||||
"CON1 Header Pin32", "CON1 Header Pin8",
|
||||
"CON1 Header Pin10", "CON1 Header Pin16",
|
||||
"CON1 Header Pin12",
|
||||
/* Bank GPIOX */
|
||||
"WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
|
||||
"WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
|
||||
"WIFI Power Enable", "WIFI WAKE HOST",
|
||||
"Bluetooth PCM DOUT", "Bluetooth PCM DIN",
|
||||
"Bluetooth PCM SYNC", "Bluetooth PCM CLK",
|
||||
"Bluetooth UART TX", "Bluetooth UART RX",
|
||||
"Bluetooth UART CTS", "Bluetooth UART RTS",
|
||||
"", "", "", "WIFI 32K", "Bluetooth Enable",
|
||||
"Bluetooth WAKE HOST", "",
|
||||
/* Bank GPIOCLK */
|
||||
"", "CON1 Header Pin35", "", "";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&clkc CLKID_FCLK_DIV4>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao18>;
|
||||
};
|
||||
|
||||
/* SDIO */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
/* WiFi firmware requires power to be kept while in suspend */
|
||||
keep-power-in-suspend;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddio_ao3v3>;
|
||||
vqmmc-supply = <&vddio_ao18>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
/* SD */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-ddr50;
|
||||
max-frequency = <100000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vmmc-supply = <&vddio_ao3v3>;
|
||||
vqmmc-supply = <&vddio_tf>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "disabled";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc3v3>;
|
||||
vqmmc-supply = <&vcc1v8>;
|
||||
};
|
||||
|
||||
/* DBG_UART */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* Bluetooth on AP6212 */
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&wifi_32k>;
|
||||
clock-names = "lpo";
|
||||
vbat-supply = <&vddio_ao3v3>;
|
||||
vddio-supply = <&vddio_ao18>;
|
||||
host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/* 40-pin CON1 */
|
||||
&uart_C {
|
||||
status = "disabled";
|
||||
pinctrl-0 = <&uart_c_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
phy-supply = <&vdd_5v>;
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -1,414 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2016 Andreas Färber
|
||||
* Copyright (c) 2016 BayLibre, Inc.
|
||||
* Author: Kevin Hilman <khilman@kernel.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxbb.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/sound/meson-aiu.h>
|
||||
|
||||
/ {
|
||||
compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
|
||||
model = "Hardkernel ODROID-C2";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
usb_otg_pwr: regulator-usb-pwrs {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "USB_OTG_PWR";
|
||||
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
||||
/*
|
||||
* signal name from schematics: PWREN
|
||||
*/
|
||||
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
/*
|
||||
* signal name from schematics: USB_POWER
|
||||
*/
|
||||
vin-supply = <&p5v0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led-blue {
|
||||
label = "c2:blue:alive";
|
||||
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
p5v0: regulator-p5v0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "P5V0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
hdmi_p5v0: regulator-hdmi_p5v0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "HDMI_P5V0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
/* AP2331SA-7 */
|
||||
vin-supply = <&p5v0>;
|
||||
};
|
||||
|
||||
tflash_vdd: regulator-tflash_vdd {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "TFLASH_VDD";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
/*
|
||||
* signal name from schematics: TFLASH_VDD_EN
|
||||
*/
|
||||
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
/* U16 RT9179GB */
|
||||
vin-supply = <&vddio_ao3v3>;
|
||||
};
|
||||
|
||||
tf_io: gpio-regulator-tf_io {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "TF_IO";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
/*
|
||||
* signal name from schematics: TF_3V3N_1V8_EN
|
||||
*/
|
||||
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <0>;
|
||||
|
||||
states = <3300000 0>,
|
||||
<1800000 1>;
|
||||
/* U12/U13 RT9179GB */
|
||||
vin-supply = <&vddio_ao3v3>;
|
||||
};
|
||||
|
||||
vcc1v8: regulator-vcc1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
/* U18 RT9179GB */
|
||||
vin-supply = <&vddio_ao3v3>;
|
||||
};
|
||||
|
||||
vcc3v3: regulator-vcc3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vddio_ao1v8: regulator-vddio-ao1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
/* U17 RT9179GB */
|
||||
vin-supply = <&p5v0>;
|
||||
};
|
||||
|
||||
vddio_ao3v3: regulator-vddio-ao3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
/* U11 MP2161GJ-C499 */
|
||||
vin-supply = <&p5v0>;
|
||||
};
|
||||
|
||||
ddr3_1v5: regulator-ddr3_1v5 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DDR3_1V5";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
/* U15 MP2161GJ-C499 */
|
||||
vin-supply = <&p5v0>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,gx-sound-card";
|
||||
model = "ODROID-C2";
|
||||
assigned-clocks = <&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>,
|
||||
<&clkc CLKID_MPLL2>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
status = "okay";
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&aiu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ao_cec_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy-handle = <ð_phy0>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
eth_phy0: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <80000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_15 */
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&hdmi_p5v0>;
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
linux,rc-map-name = "rc-odroid";
|
||||
};
|
||||
|
||||
&gpio_ao {
|
||||
gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
|
||||
"USB HUB nRESET", "USB OTG Power En",
|
||||
"J7 Header Pin2", "IR In", "J7 Header Pin4",
|
||||
"J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
|
||||
"HDMI CEC", "SYS LED",
|
||||
/* GPIO_TEST_N */
|
||||
"";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
gpio-line-names = /* Bank GPIOZ */
|
||||
"Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
|
||||
"Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
|
||||
"Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
|
||||
"Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
|
||||
"Eth PHY nRESET", "Eth PHY Intc",
|
||||
/* Bank GPIOH */
|
||||
"HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "",
|
||||
/* Bank BOOT */
|
||||
"eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
|
||||
"eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
|
||||
"eMMC Reset", "eMMC CMD",
|
||||
"", "", "", "", "", "", "",
|
||||
/* Bank CARD */
|
||||
"SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
|
||||
"SDCard D3", "SDCard D2", "SDCard Det",
|
||||
/* Bank GPIODV */
|
||||
"", "", "", "", "", "", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "", "", "", "", "", "",
|
||||
"I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
|
||||
"PWM D", "PWM B",
|
||||
/* Bank GPIOY */
|
||||
"Revision Bit0", "Revision Bit1", "",
|
||||
"J2 Header Pin35", "", "", "", "J2 Header Pin36",
|
||||
"J2 Header Pin31", "", "", "", "TF VDD En",
|
||||
"J2 Header Pin32", "J2 Header Pin26", "", "",
|
||||
/* Bank GPIOX */
|
||||
"J2 Header Pin29", "J2 Header Pin24",
|
||||
"J2 Header Pin23", "J2 Header Pin22",
|
||||
"J2 Header Pin21", "J2 Header Pin18",
|
||||
"J2 Header Pin33", "J2 Header Pin19",
|
||||
"J2 Header Pin16", "J2 Header Pin15",
|
||||
"J2 Header Pin12", "J2 Header Pin13",
|
||||
"J2 Header Pin8", "J2 Header Pin10",
|
||||
"", "", "", "", "",
|
||||
"J2 Header Pin11", "", "J2 Header Pin7", "",
|
||||
/* Bank GPIOCLK */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcc1v8>;
|
||||
};
|
||||
|
||||
&scpi_clocks {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* SD */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-ddr50;
|
||||
max-frequency = <100000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vmmc-supply = <&tflash_vdd>;
|
||||
vqmmc-supply = <&tf_io>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc3v3>;
|
||||
vqmmc-supply = <&vcc1v8>;
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "disabled";
|
||||
phy-supply = <&usb_otg_pwr>;
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
phy-supply = <&usb_otg_pwr>;
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
dr_mode = "host";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
hub@1 {
|
||||
/* Genesys Logic GL852G USB 2.0 hub */
|
||||
compatible = "usb5e3,610";
|
||||
reg = <1>;
|
||||
vdd-supply = <&p5v0>;
|
||||
reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
@@ -1,100 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2016 Andreas Färber
|
||||
* Copyright (c) 2016 BayLibre, Inc.
|
||||
* Author: Kevin Hilman <khilman@kernel.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxbb-p20x.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "amlogic,p200", "amlogic,meson-gxbb";
|
||||
model = "Amlogic Meson GXBB P200 Development Board";
|
||||
|
||||
avdd18_usb_adc: regulator-avdd18_usb_adc {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "AVDD18_USB_ADC";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
adc_keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
|
||||
button-home {
|
||||
label = "Home";
|
||||
linux,code = <KEY_HOME>;
|
||||
press-threshold-microvolt = <900000>; /* 50% */
|
||||
};
|
||||
|
||||
button-esc {
|
||||
label = "Esc";
|
||||
linux,code = <KEY_ESC>;
|
||||
press-threshold-microvolt = <684000>; /* 38% */
|
||||
};
|
||||
|
||||
button-up {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
press-threshold-microvolt = <468000>; /* 26% */
|
||||
};
|
||||
|
||||
button-down {
|
||||
label = "Volume Down";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
press-threshold-microvolt = <252000>; /* 14% */
|
||||
};
|
||||
|
||||
button-menu {
|
||||
label = "Menu";
|
||||
linux,code = <KEY_MENU>;
|
||||
press-threshold-microvolt = <0>; /* 0% */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy-handle = <ð_phy0>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
eth_phy0: ethernet-phy@3 {
|
||||
/* Micrel KSZ9031 (0x00221620) */
|
||||
reg = <3>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_15 */
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_B {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c_b_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&avdd18_usb_adc>;
|
||||
};
|
||||
@@ -1,26 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2016 Andreas Färber
|
||||
* Copyright (c) 2016 BayLibre, Inc.
|
||||
* Author: Kevin Hilman <khilman@kernel.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxbb-p20x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "amlogic,p201", "amlogic,meson-gxbb";
|
||||
model = "Amlogic Meson GXBB P201 Development Board";
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ð_rmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy-mode = "rmii";
|
||||
|
||||
snps,reset-gpio = <&gpio GPIOZ_14 0>;
|
||||
snps,reset-delays-us = <0>, <10000>, <1000000>;
|
||||
snps,reset-active-low;
|
||||
};
|
||||
@@ -1,250 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2016 Andreas Färber
|
||||
* Copyright (c) 2016 BayLibre, Inc.
|
||||
* Author: Kevin Hilman <khilman@kernel.org>
|
||||
*/
|
||||
|
||||
#include "meson-gxbb.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
usb_pwr: regulator-usb-pwrs {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "USB_PWR";
|
||||
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
||||
/* signal name in schematic: USB_PWR_EN */
|
||||
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vddio_card: gpio-regulator {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "VDDIO_CARD";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
|
||||
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
|
||||
states = <1800000 0>,
|
||||
<3300000 1>;
|
||||
|
||||
regulator-settling-time-up-us = <10000>;
|
||||
regulator-settling-time-down-us = <150000>;
|
||||
};
|
||||
|
||||
vddio_boot: regulator-vddio_boot {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_BOOT";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
cvbs_connector: cvbs-connector {
|
||||
compatible = "composite-video-connector";
|
||||
|
||||
port {
|
||||
cvbs_connector_in: endpoint {
|
||||
remote-endpoint = <&cvbs_vdac_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ao_cec_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cvbs_vdac_port {
|
||||
cvbs_vdac_out: endpoint {
|
||||
remote-endpoint = <&cvbs_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&clkc CLKID_FCLK_DIV4>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
/* Wireless SDIO Module */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
/* WiFi firmware requires power to be kept while in suspend */
|
||||
keep-power-in-suspend;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
max-frequency = <100000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_card>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* This UART is brought out to the DB9 connector */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
phy-supply = <&usb_pwr>;
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -1,58 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2016 BayLibre, Inc.
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxbb-wetek.dtsi"
|
||||
#include <dt-bindings/sound/meson-aiu.h>
|
||||
|
||||
/ {
|
||||
compatible = "wetek,hub", "amlogic,meson-gxbb";
|
||||
model = "WeTek Hub";
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,gx-sound-card";
|
||||
model = "WETEK-HUB";
|
||||
assigned-clocks = <&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>,
|
||||
<&clkc CLKID_MPLL2>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
status = "okay";
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&aiu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ir {
|
||||
linux,rc-map-name = "rc-wetek-hub";
|
||||
};
|
||||
@@ -1,119 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2016 BayLibre, Inc.
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxbb-wetek.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/sound/meson-aiu.h>
|
||||
|
||||
/ {
|
||||
compatible = "wetek,play2", "amlogic,meson-gxbb";
|
||||
model = "WeTek Play 2";
|
||||
|
||||
spdif_dit: audio-codec-0 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "linux,spdif-dit";
|
||||
status = "okay";
|
||||
sound-name-prefix = "DIT";
|
||||
};
|
||||
|
||||
leds {
|
||||
led-wifi {
|
||||
label = "wetek-play:wifi-status";
|
||||
gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-ethernet {
|
||||
label = "wetek-play:ethernet-status";
|
||||
gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
button {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,gx-sound-card";
|
||||
model = "WETEK-PLAY2";
|
||||
assigned-clocks = <&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>,
|
||||
<&clkc CLKID_MPLL2>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
status = "okay";
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-3 {
|
||||
sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&spdif_dit>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-4 {
|
||||
sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
|
||||
|
||||
codec-0 {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&aiu {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&spdif_out_y_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&i2c_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ir {
|
||||
linux,rc-map-name = "rc-wetek-play2";
|
||||
};
|
||||
@@ -1,292 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2016 Andreas Färber
|
||||
* Copyright (c) 2016 BayLibre, Inc.
|
||||
* Author: Kevin Hilman <khilman@kernel.org>
|
||||
*/
|
||||
|
||||
#include "meson-gxbb.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-power {
|
||||
/* red in suspend or power-off */
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
usb_pwr: regulator-usb-pwrs {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "USB_PWR";
|
||||
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
||||
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vddio_boot: regulator-vddio_boot {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_BOOT";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vddio_ao18: regulator-vddio_ao18 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
cvbs-connector {
|
||||
compatible = "composite-video-connector";
|
||||
|
||||
port {
|
||||
cvbs_connector_in: endpoint {
|
||||
remote-endpoint = <&cvbs_vdac_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ao_cec_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cvbs_vdac_port {
|
||||
cvbs_vdac_out: endpoint {
|
||||
remote-endpoint = <&cvbs_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
ðmac {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ð_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <ð_phy0>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
amlogic,tx-delay-ns = <2>;
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
eth_phy0: ethernet-phy@0 {
|
||||
/* Realtek RTL8211F (0x001cc916) */
|
||||
reg = <0>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <80000>;
|
||||
reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
/* MAC_INTR on GPIOZ_15 */
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&vddio_ao18>;
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&clkc CLKID_FCLK_DIV4>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao18>;
|
||||
};
|
||||
|
||||
/* Wireless SDIO Module */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
/* WiFi firmware requires power to be kept while in suspend */
|
||||
keep-power-in-suspend;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* This is connected to the Bluetooth module: */
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/* This UART is brought out to the DB9 connector */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
phy-supply = <&usb_pwr>;
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -1,870 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2016 Andreas Färber
|
||||
*/
|
||||
|
||||
#include "meson-gx.dtsi"
|
||||
#include "meson-gx-mali450.dtsi"
|
||||
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
|
||||
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
|
||||
#include <dt-bindings/clock/gxbb-clkc.h>
|
||||
#include <dt-bindings/clock/gxbb-aoclkc.h>
|
||||
#include <dt-bindings/reset/gxbb-aoclkc.h>
|
||||
|
||||
/ {
|
||||
compatible = "amlogic,meson-gxbb";
|
||||
|
||||
soc {
|
||||
usb0_phy: phy@c0000000 {
|
||||
compatible = "amlogic,meson-gxbb-usb2-phy";
|
||||
#phy-cells = <0>;
|
||||
reg = <0x0 0xc0000000 0x0 0x20>;
|
||||
resets = <&reset RESET_USB_OTG>;
|
||||
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
|
||||
clock-names = "usb_general", "usb";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1_phy: phy@c0000020 {
|
||||
compatible = "amlogic,meson-gxbb-usb2-phy";
|
||||
#phy-cells = <0>;
|
||||
reg = <0x0 0xc0000020 0x0 0x20>;
|
||||
resets = <&reset RESET_USB_OTG>;
|
||||
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
|
||||
clock-names = "usb_general", "usb";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb0: usb@c9000000 {
|
||||
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
|
||||
reg = <0x0 0xc9000000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
|
||||
clock-names = "otg";
|
||||
phys = <&usb0_phy>;
|
||||
phy-names = "usb2-phy";
|
||||
dr_mode = "host";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb1: usb@c9100000 {
|
||||
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
|
||||
reg = <0x0 0xc9100000 0x0 0x40000>;
|
||||
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
|
||||
clock-names = "otg";
|
||||
phys = <&usb1_phy>;
|
||||
phy-names = "usb2-phy";
|
||||
dr_mode = "host";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&aiu {
|
||||
compatible = "amlogic,aiu-gxbb", "amlogic,aiu";
|
||||
clocks = <&clkc CLKID_AIU_GLUE>,
|
||||
<&clkc CLKID_I2S_OUT>,
|
||||
<&clkc CLKID_AOCLK_GATE>,
|
||||
<&clkc CLKID_CTS_AMCLK>,
|
||||
<&clkc CLKID_MIXER_IFACE>,
|
||||
<&clkc CLKID_IEC958>,
|
||||
<&clkc CLKID_IEC958_GATE>,
|
||||
<&clkc CLKID_CTS_MCLK_I958>,
|
||||
<&clkc CLKID_CTS_I958>;
|
||||
clock-names = "pclk",
|
||||
"i2s_pclk",
|
||||
"i2s_aoclk",
|
||||
"i2s_mclk",
|
||||
"i2s_mixer",
|
||||
"spdif_pclk",
|
||||
"spdif_aoclk",
|
||||
"spdif_mclk",
|
||||
"spdif_mclk_sel";
|
||||
resets = <&reset RESET_AIU>;
|
||||
};
|
||||
|
||||
&aobus {
|
||||
pinctrl_aobus: pinctrl@14 {
|
||||
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
gpio_ao: bank@14 {
|
||||
reg = <0x0 0x00014 0x0 0x8>,
|
||||
<0x0 0x0002c 0x0 0x4>,
|
||||
<0x0 0x00024 0x0 0x8>;
|
||||
reg-names = "mux", "pull", "gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pinctrl_aobus 0 0 14>;
|
||||
};
|
||||
|
||||
uart_ao_a_pins: uart_ao_a {
|
||||
mux {
|
||||
groups = "uart_tx_ao_a", "uart_rx_ao_a";
|
||||
function = "uart_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
|
||||
mux {
|
||||
groups = "uart_cts_ao_a",
|
||||
"uart_rts_ao_a";
|
||||
function = "uart_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart_ao_b_pins: uart_ao_b {
|
||||
mux {
|
||||
groups = "uart_tx_ao_b", "uart_rx_ao_b";
|
||||
function = "uart_ao_b";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
|
||||
mux {
|
||||
groups = "uart_cts_ao_b",
|
||||
"uart_rts_ao_b";
|
||||
function = "uart_ao_b";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
remote_input_ao_pins: remote_input_ao {
|
||||
mux {
|
||||
groups = "remote_input_ao";
|
||||
function = "remote_input_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_ao_pins: i2c_ao {
|
||||
mux {
|
||||
groups = "i2c_sck_ao",
|
||||
"i2c_sda_ao";
|
||||
function = "i2c_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_ao_a_3_pins: pwm_ao_a_3 {
|
||||
mux {
|
||||
groups = "pwm_ao_a_3";
|
||||
function = "pwm_ao_a_3";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_ao_a_6_pins: pwm_ao_a_6 {
|
||||
mux {
|
||||
groups = "pwm_ao_a_6";
|
||||
function = "pwm_ao_a_6";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_ao_a_12_pins: pwm_ao_a_12 {
|
||||
mux {
|
||||
groups = "pwm_ao_a_12";
|
||||
function = "pwm_ao_a_12";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_ao_b_pins: pwm_ao_b {
|
||||
mux {
|
||||
groups = "pwm_ao_b";
|
||||
function = "pwm_ao_b";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2s_am_clk_pins: i2s_am_clk {
|
||||
mux {
|
||||
groups = "i2s_am_clk";
|
||||
function = "i2s_out_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2s_out_ao_clk_pins: i2s_out_ao_clk {
|
||||
mux {
|
||||
groups = "i2s_out_ao_clk";
|
||||
function = "i2s_out_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2s_out_lr_clk_pins: i2s_out_lr_clk {
|
||||
mux {
|
||||
groups = "i2s_out_lr_clk";
|
||||
function = "i2s_out_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
|
||||
mux {
|
||||
groups = "i2s_out_ch01_ao";
|
||||
function = "i2s_out_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
|
||||
mux {
|
||||
groups = "i2s_out_ch23_ao";
|
||||
function = "i2s_out_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
|
||||
mux {
|
||||
groups = "i2s_out_ch45_ao";
|
||||
function = "i2s_out_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spdif_out_ao_6_pins: spdif_out_ao_6 {
|
||||
mux {
|
||||
groups = "spdif_out_ao_6";
|
||||
function = "spdif_out_ao";
|
||||
};
|
||||
};
|
||||
|
||||
spdif_out_ao_13_pins: spdif_out_ao_13 {
|
||||
mux {
|
||||
groups = "spdif_out_ao_13";
|
||||
function = "spdif_out_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
ao_cec_pins: ao_cec {
|
||||
mux {
|
||||
groups = "ao_cec";
|
||||
function = "cec_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
ee_cec_pins: ee_cec {
|
||||
mux {
|
||||
groups = "ee_cec";
|
||||
function = "cec_ao";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cbus {
|
||||
spifc: spi@8c80 {
|
||||
compatible = "amlogic,meson-gxbb-spifc";
|
||||
reg = <0x0 0x08c80 0x0 0x80>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clkc CLKID_SPI>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
clocks = <&clkc_AO CLKID_AO_CEC_32K>;
|
||||
clock-names = "core";
|
||||
};
|
||||
|
||||
&clkc_AO {
|
||||
compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
|
||||
clocks = <&xtal>, <&clkc CLKID_CLK81>;
|
||||
clock-names = "xtal", "mpeg-clk";
|
||||
};
|
||||
|
||||
&efuse {
|
||||
clocks = <&clkc CLKID_EFUSE>;
|
||||
};
|
||||
|
||||
ðmac {
|
||||
clocks = <&clkc CLKID_ETH>,
|
||||
<&clkc CLKID_FCLK_DIV2>,
|
||||
<&clkc CLKID_MPLL2>,
|
||||
<&clkc CLKID_FCLK_DIV2>;
|
||||
clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
|
||||
};
|
||||
|
||||
&gpio_intc {
|
||||
compatible = "amlogic,meson-gxbb-gpio-intc",
|
||||
"amlogic,meson-gpio-intc";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
|
||||
resets = <&reset RESET_HDMITX_CAPB3>,
|
||||
<&reset RESET_HDMI_SYSTEM_RESET>,
|
||||
<&reset RESET_HDMI_TX>;
|
||||
reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
|
||||
clocks = <&clkc CLKID_HDMI_PCLK>,
|
||||
<&clkc CLKID_CLK81>,
|
||||
<&clkc CLKID_GCLK_VENCI_INT0>;
|
||||
clock-names = "isfr", "iahb", "venci";
|
||||
};
|
||||
|
||||
&sysctrl {
|
||||
clkc: clock-controller {
|
||||
compatible = "amlogic,gxbb-clkc";
|
||||
#clock-cells = <1>;
|
||||
clocks = <&xtal>;
|
||||
clock-names = "xtal";
|
||||
};
|
||||
};
|
||||
|
||||
&hwrng {
|
||||
clocks = <&clkc CLKID_RNG0>;
|
||||
clock-names = "core";
|
||||
};
|
||||
|
||||
&i2c_A {
|
||||
clocks = <&clkc CLKID_I2C>;
|
||||
};
|
||||
|
||||
&i2c_AO {
|
||||
clocks = <&clkc CLKID_AO_I2C>;
|
||||
};
|
||||
|
||||
&i2c_B {
|
||||
clocks = <&clkc CLKID_I2C>;
|
||||
};
|
||||
|
||||
&i2c_C {
|
||||
clocks = <&clkc CLKID_I2C>;
|
||||
};
|
||||
|
||||
&mali {
|
||||
compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
|
||||
|
||||
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
|
||||
clock-names = "bus", "core";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_GP0_PLL>;
|
||||
assigned-clock-rates = <744000000>;
|
||||
};
|
||||
|
||||
&periphs {
|
||||
pinctrl_periphs: pinctrl@4b0 {
|
||||
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
gpio: bank@4b0 {
|
||||
reg = <0x0 0x004b0 0x0 0x28>,
|
||||
<0x0 0x004e8 0x0 0x14>,
|
||||
<0x0 0x00520 0x0 0x14>,
|
||||
<0x0 0x00430 0x0 0x40>;
|
||||
reg-names = "mux", "pull", "pull-enable", "gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pinctrl_periphs 0 0 119>;
|
||||
};
|
||||
|
||||
emmc_pins: emmc {
|
||||
mux-0 {
|
||||
groups = "emmc_nand_d07",
|
||||
"emmc_cmd";
|
||||
function = "emmc";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "emmc_clk";
|
||||
function = "emmc";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_ds_pins: emmc-ds {
|
||||
mux {
|
||||
groups = "emmc_ds";
|
||||
function = "emmc";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_clk_gate_pins: emmc_clk_gate {
|
||||
mux {
|
||||
groups = "BOOT_8";
|
||||
function = "gpio_periphs";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
nor_pins: nor {
|
||||
mux {
|
||||
groups = "nor_d",
|
||||
"nor_q",
|
||||
"nor_c",
|
||||
"nor_cs";
|
||||
function = "nor";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi-pins {
|
||||
mux {
|
||||
groups = "spi_miso",
|
||||
"spi_mosi",
|
||||
"spi_sclk";
|
||||
function = "spi";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_idle_high_pins: spi-idle-high-pins {
|
||||
mux {
|
||||
groups = "spi_sclk";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
spi_idle_low_pins: spi-idle-low-pins {
|
||||
mux {
|
||||
groups = "spi_sclk";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
spi_ss0_pins: spi-ss0 {
|
||||
mux {
|
||||
groups = "spi_ss0";
|
||||
function = "spi";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
sdcard_pins: sdcard {
|
||||
mux-0 {
|
||||
groups = "sdcard_d0",
|
||||
"sdcard_d1",
|
||||
"sdcard_d2",
|
||||
"sdcard_d3",
|
||||
"sdcard_cmd";
|
||||
function = "sdcard";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "sdcard_clk";
|
||||
function = "sdcard";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
sdcard_clk_gate_pins: sdcard_clk_gate {
|
||||
mux {
|
||||
groups = "CARD_2";
|
||||
function = "gpio_periphs";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pins: sdio {
|
||||
mux-0 {
|
||||
groups = "sdio_d0",
|
||||
"sdio_d1",
|
||||
"sdio_d2",
|
||||
"sdio_d3",
|
||||
"sdio_cmd";
|
||||
function = "sdio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux-1 {
|
||||
groups = "sdio_clk";
|
||||
function = "sdio";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_clk_gate_pins: sdio_clk_gate {
|
||||
mux {
|
||||
groups = "GPIOX_4";
|
||||
function = "gpio_periphs";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_irq_pins: sdio_irq {
|
||||
mux {
|
||||
groups = "sdio_irq";
|
||||
function = "sdio";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart_a_pins: uart_a {
|
||||
mux {
|
||||
groups = "uart_tx_a",
|
||||
"uart_rx_a";
|
||||
function = "uart_a";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart_a_cts_rts_pins: uart_a_cts_rts {
|
||||
mux {
|
||||
groups = "uart_cts_a",
|
||||
"uart_rts_a";
|
||||
function = "uart_a";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart_b_pins: uart_b {
|
||||
mux {
|
||||
groups = "uart_tx_b",
|
||||
"uart_rx_b";
|
||||
function = "uart_b";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart_b_cts_rts_pins: uart_b_cts_rts {
|
||||
mux {
|
||||
groups = "uart_cts_b",
|
||||
"uart_rts_b";
|
||||
function = "uart_b";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart_c_pins: uart_c {
|
||||
mux {
|
||||
groups = "uart_tx_c",
|
||||
"uart_rx_c";
|
||||
function = "uart_c";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
uart_c_cts_rts_pins: uart_c_cts_rts {
|
||||
mux {
|
||||
groups = "uart_cts_c",
|
||||
"uart_rts_c";
|
||||
function = "uart_c";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_a_pins: i2c_a {
|
||||
mux {
|
||||
groups = "i2c_sck_a",
|
||||
"i2c_sda_a";
|
||||
function = "i2c_a";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_b_pins: i2c_b {
|
||||
mux {
|
||||
groups = "i2c_sck_b",
|
||||
"i2c_sda_b";
|
||||
function = "i2c_b";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_c_pins: i2c_c {
|
||||
mux {
|
||||
groups = "i2c_sck_c",
|
||||
"i2c_sda_c";
|
||||
function = "i2c_c";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
eth_rgmii_pins: eth-rgmii {
|
||||
mux {
|
||||
groups = "eth_mdio",
|
||||
"eth_mdc",
|
||||
"eth_clk_rx_clk",
|
||||
"eth_rx_dv",
|
||||
"eth_rxd0",
|
||||
"eth_rxd1",
|
||||
"eth_rxd2",
|
||||
"eth_rxd3",
|
||||
"eth_rgmii_tx_clk",
|
||||
"eth_tx_en",
|
||||
"eth_txd0",
|
||||
"eth_txd1",
|
||||
"eth_txd2",
|
||||
"eth_txd3";
|
||||
function = "eth";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
eth_rmii_pins: eth-rmii {
|
||||
mux {
|
||||
groups = "eth_mdio",
|
||||
"eth_mdc",
|
||||
"eth_clk_rx_clk",
|
||||
"eth_rx_dv",
|
||||
"eth_rxd0",
|
||||
"eth_rxd1",
|
||||
"eth_tx_en",
|
||||
"eth_txd0",
|
||||
"eth_txd1";
|
||||
function = "eth";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_a_x_pins: pwm_a_x {
|
||||
mux {
|
||||
groups = "pwm_a_x";
|
||||
function = "pwm_a_x";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_a_y_pins: pwm_a_y {
|
||||
mux {
|
||||
groups = "pwm_a_y";
|
||||
function = "pwm_a_y";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_b_pins: pwm_b {
|
||||
mux {
|
||||
groups = "pwm_b";
|
||||
function = "pwm_b";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_d_pins: pwm_d {
|
||||
mux {
|
||||
groups = "pwm_d";
|
||||
function = "pwm_d";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_e_pins: pwm_e {
|
||||
mux {
|
||||
groups = "pwm_e";
|
||||
function = "pwm_e";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_f_x_pins: pwm_f_x {
|
||||
mux {
|
||||
groups = "pwm_f_x";
|
||||
function = "pwm_f_x";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_f_y_pins: pwm_f_y {
|
||||
mux {
|
||||
groups = "pwm_f_y";
|
||||
function = "pwm_f_y";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_hpd_pins: hdmi_hpd {
|
||||
mux {
|
||||
groups = "hdmi_hpd";
|
||||
function = "hdmi_hpd";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_i2c_pins: hdmi_i2c {
|
||||
mux {
|
||||
groups = "hdmi_sda", "hdmi_scl";
|
||||
function = "hdmi_i2c";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2sout_ch23_y_pins: i2sout_ch23_y {
|
||||
mux {
|
||||
groups = "i2sout_ch23_y";
|
||||
function = "i2s_out";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2sout_ch45_y_pins: i2sout_ch45_y {
|
||||
mux {
|
||||
groups = "i2sout_ch45_y";
|
||||
function = "i2s_out";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2sout_ch67_y_pins: i2sout_ch67_y {
|
||||
mux {
|
||||
groups = "i2sout_ch67_y";
|
||||
function = "i2s_out";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spdif_out_y_pins: spdif_out_y {
|
||||
mux {
|
||||
groups = "spdif_out_y";
|
||||
function = "spdif_out";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwrc {
|
||||
resets = <&reset RESET_VIU>,
|
||||
<&reset RESET_VENC>,
|
||||
<&reset RESET_VCBUS>,
|
||||
<&reset RESET_BT656>,
|
||||
<&reset RESET_DVIN_RESET>,
|
||||
<&reset RESET_RDMA>,
|
||||
<&reset RESET_VENCI>,
|
||||
<&reset RESET_VENCP>,
|
||||
<&reset RESET_VDAC>,
|
||||
<&reset RESET_VDI6>,
|
||||
<&reset RESET_VENCL>,
|
||||
<&reset RESET_VID_LOCK>;
|
||||
reset-names = "viu", "venc", "vcbus", "bt656",
|
||||
"dvin", "rdma", "venci", "vencp",
|
||||
"vdac", "vdi6", "vencl", "vid_lock";
|
||||
clocks = <&clkc CLKID_VPU>,
|
||||
<&clkc CLKID_VAPB>;
|
||||
clock-names = "vpu", "vapb";
|
||||
/*
|
||||
* VPU clocking is provided by two identical clock paths
|
||||
* VPU_0 and VPU_1 muxed to a single clock by a glitch
|
||||
* free mux to safely change frequency while running.
|
||||
* Same for VAPB but with a final gate after the glitch free mux.
|
||||
*/
|
||||
assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
|
||||
<&clkc CLKID_VPU_0>,
|
||||
<&clkc CLKID_VPU>, /* Glitch free mux */
|
||||
<&clkc CLKID_VAPB_0_SEL>,
|
||||
<&clkc CLKID_VAPB_0>,
|
||||
<&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
|
||||
assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
|
||||
<0>, /* Do Nothing */
|
||||
<&clkc CLKID_VPU_0>,
|
||||
<&clkc CLKID_FCLK_DIV4>,
|
||||
<0>, /* Do Nothing */
|
||||
<&clkc CLKID_VAPB_0>;
|
||||
assigned-clock-rates = <0>, /* Do Nothing */
|
||||
<666666666>,
|
||||
<0>, /* Do Nothing */
|
||||
<0>, /* Do Nothing */
|
||||
<250000000>,
|
||||
<0>; /* Do Nothing */
|
||||
};
|
||||
|
||||
&saradc {
|
||||
compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
|
||||
clocks = <&xtal>,
|
||||
<&clkc CLKID_SAR_ADC>,
|
||||
<&clkc CLKID_SAR_ADC_CLK>,
|
||||
<&clkc CLKID_SAR_ADC_SEL>;
|
||||
clock-names = "clkin", "core", "adc_clk", "adc_sel";
|
||||
};
|
||||
|
||||
&sd_emmc_a {
|
||||
clocks = <&clkc CLKID_SD_EMMC_A>,
|
||||
<&clkc CLKID_SD_EMMC_A_CLK0>,
|
||||
<&clkc CLKID_FCLK_DIV2>;
|
||||
clock-names = "core", "clkin0", "clkin1";
|
||||
resets = <&reset RESET_SD_EMMC_A>;
|
||||
};
|
||||
|
||||
&sd_emmc_b {
|
||||
clocks = <&clkc CLKID_SD_EMMC_B>,
|
||||
<&clkc CLKID_SD_EMMC_B_CLK0>,
|
||||
<&clkc CLKID_FCLK_DIV2>;
|
||||
clock-names = "core", "clkin0", "clkin1";
|
||||
resets = <&reset RESET_SD_EMMC_B>;
|
||||
};
|
||||
|
||||
&sd_emmc_c {
|
||||
clocks = <&clkc CLKID_SD_EMMC_C>,
|
||||
<&clkc CLKID_SD_EMMC_C_CLK0>,
|
||||
<&clkc CLKID_FCLK_DIV2>;
|
||||
clock-names = "core", "clkin0", "clkin1";
|
||||
resets = <&reset RESET_SD_EMMC_C>;
|
||||
};
|
||||
|
||||
&simplefb_hdmi {
|
||||
clocks = <&clkc CLKID_HDMI_PCLK>,
|
||||
<&clkc CLKID_CLK81>,
|
||||
<&clkc CLKID_GCLK_VENCI_INT0>;
|
||||
};
|
||||
|
||||
&spicc {
|
||||
clocks = <&clkc CLKID_SPICC>;
|
||||
clock-names = "core";
|
||||
resets = <&reset RESET_PERIPHS_SPICC>;
|
||||
num-cs = <1>;
|
||||
};
|
||||
|
||||
&spifc {
|
||||
clocks = <&clkc CLKID_SPI>;
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
|
||||
clock-names = "xtal", "pclk", "baud";
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
|
||||
clock-names = "xtal", "pclk", "baud";
|
||||
};
|
||||
|
||||
&uart_AO_B {
|
||||
clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
|
||||
clock-names = "xtal", "pclk", "baud";
|
||||
};
|
||||
|
||||
&uart_B {
|
||||
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
|
||||
clock-names = "xtal", "pclk", "baud";
|
||||
};
|
||||
|
||||
&uart_C {
|
||||
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
|
||||
clock-names = "xtal", "pclk", "baud";
|
||||
};
|
||||
|
||||
&vpu {
|
||||
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
|
||||
power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
|
||||
};
|
||||
|
||||
&vdec {
|
||||
compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
|
||||
clocks = <&clkc CLKID_DOS_PARSER>,
|
||||
<&clkc CLKID_DOS>,
|
||||
<&clkc CLKID_VDEC_1>,
|
||||
<&clkc CLKID_VDEC_HEVC>;
|
||||
clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
|
||||
resets = <&reset RESET_PARSER>;
|
||||
reset-names = "esparser";
|
||||
};
|
||||
Reference in New Issue
Block a user