Mirrors/u-boot
1
0
Fork 0
mirror of https://source.denx.de/u-boot/u-boot.git synced 2026-06-13 15:03:58 +03:00
Code Issues Packages Projects Releases Wiki Activity

configs: starfive: Enable PCIE auto enum and NVME/USB stuff for Starfive Visionfive 2

Browse Source 
Although PCIE driver already exists, board defconfig isn't configured to
enable PCIE enum on boot, thus USB storage device and NVME drive are not
supported by default. So modify defconfig to enable PCIE auto enum, then
start USB subsystem and scan nvme drive on boot.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Tested-by: Milan P. Stanić <mps@arvanta.net>
This commit is contained in:
Shengyu Qu
2023-08-22 22:33:56 +08:00
committed by Leo Yu-Chi Liang
parent 6164d86984
commit dccf4a843a
1 changed files with 7 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
configs/starfive_visionfive2_defconfig
View File

@@ -30,6 +30,7 @@ CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_SYS_PCI_64BIT=y
CONFIG_PCI=y
CONFIG_PCI_INIT_R=y
CONFIG_TARGET_STARFIVE_VISIONFIVE2=y
CONFIG_SPL_OPENSBI_LOAD_ADDR=0x40000000
CONFIG_ARCH_RV64I=y
@@ -43,7 +44,7 @@ CONFIG_SD_BOOT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr};fdt addr ${fdtcontroladdr};"
CONFIG_PREBOOT="nvme scan; usb start; setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr};"
CONFIG_DEFAULT_FDT_FILE="starfive/jh7110-starfive-visionfive-2.dtb"
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
@@ -124,4 +125,9 @@ CONFIG_TIMER_EARLY=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_PCI=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y