mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 15:03:58 +03:00
arm64: dts: imx: Switch to using upstream DT on DH i.MX8MP DHCOM PDK2/PDK3
Enable OF_UPSTREAM to use upstream DT and add freescale/ prefix to the DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/ including *-u-boot.dtsi and DTBOs from arch/$(ARCH)/dts/ directory. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de>
This commit is contained in:
Marek Vasut
committed by
Fabio Estevam
Fabio Estevam
parent
a55c4836f3
commit
f566e94c8a
@@ -961,8 +961,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
|
||||
imx8mp-dhcom-som-overlay-eth2xfast.dtbo \
|
||||
imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo \
|
||||
imx8mp-dhcom-drc02.dtb \
|
||||
imx8mp-dhcom-pdk2.dtb \
|
||||
imx8mp-dhcom-pdk3.dtb \
|
||||
imx8mp-dhcom-pdk3-overlay-rev100.dtbo \
|
||||
imx8mp-dhcom-picoitx.dtb \
|
||||
imx8mp-icore-mx8mp-edimm2.2.dtb \
|
||||
|
||||
@@ -1,158 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
|
||||
*
|
||||
* DHCOM iMX8MP variant:
|
||||
* DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
|
||||
* DHCOM PCB number: 660-100 or newer
|
||||
* PDK2 PCB number: 516-400 or newer
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/phy/phy-imx8-pcie.h>
|
||||
#include "imx8mp-dhcom-som.dtsi"
|
||||
|
||||
/ {
|
||||
model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)";
|
||||
compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som",
|
||||
"fsl,imx8mp";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-0 {
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
|
||||
label = "TA1-GPIO-A";
|
||||
linux,code = <KEY_A>;
|
||||
pinctrl-0 = <&pinctrl_dhcom_a>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-1 {
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
|
||||
label = "TA2-GPIO-B";
|
||||
linux,code = <KEY_B>;
|
||||
pinctrl-0 = <&pinctrl_dhcom_b>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-2 {
|
||||
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
|
||||
label = "TA3-GPIO-C";
|
||||
linux,code = <KEY_C>;
|
||||
pinctrl-0 = <&pinctrl_dhcom_c>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-3 {
|
||||
gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* GPIO D */
|
||||
label = "TA4-GPIO-D";
|
||||
linux,code = <KEY_D>;
|
||||
pinctrl-0 = <&pinctrl_dhcom_d>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
led {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */
|
||||
pinctrl-0 = <&pinctrl_dhcom_e>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
|
||||
pinctrl-0 = <&pinctrl_dhcom_f>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */
|
||||
pinctrl-0 = <&pinctrl_dhcom_h>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
led-3 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
|
||||
pinctrl-0 = <&pinctrl_dhcom_i>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&fec { /* Second ethernet */
|
||||
pinctrl-0 = <&pinctrl_fec_rgmii>;
|
||||
phy-handle = <ðphypdk>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
mdio {
|
||||
ethphypdk: ethernet-phy@7 { /* KSZ 9021 */
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
pinctrl-0 = <&pinctrl_ethphy1>;
|
||||
pinctrl-names = "default";
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
max-speed = <100>;
|
||||
reg = <7>;
|
||||
reset-assert-us = <1000>;
|
||||
reset-deassert-us = <1000>;
|
||||
reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
|
||||
rxc-skew-ps = <3000>;
|
||||
rxd0-skew-ps = <0>;
|
||||
rxd1-skew-ps = <0>;
|
||||
rxd2-skew-ps = <0>;
|
||||
rxd3-skew-ps = <0>;
|
||||
rxdv-skew-ps = <0>;
|
||||
txc-skew-ps = <3000>;
|
||||
txd0-skew-ps = <0>;
|
||||
txd1-skew-ps = <0>;
|
||||
txd2-skew-ps = <0>;
|
||||
txd3-skew-ps = <0>;
|
||||
txen-skew-ps = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&flexcan1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
fsl,over-current-active-low;
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
/*
|
||||
* GPIO_A,B,C,D are connected to buttons.
|
||||
* GPIO_E,F,H,I are connected to LEDs.
|
||||
* GPIO_M is connected to CLKOUT2.
|
||||
*/
|
||||
pinctrl-0 = <&pinctrl_hog_base
|
||||
&pinctrl_dhcom_g &pinctrl_dhcom_j
|
||||
&pinctrl_dhcom_k &pinctrl_dhcom_l
|
||||
&pinctrl_dhcom_int>;
|
||||
};
|
||||
@@ -1,317 +0,0 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2023 Marek Vasut <marex@denx.de>
|
||||
*
|
||||
* DHCOM iMX8MP variant:
|
||||
* DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
|
||||
* DHCOM PCB number: 660-100 or newer
|
||||
* PDK3 PCB number: 669-100 or newer
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/phy/phy-imx8-pcie.h>
|
||||
#include "imx8mp-dhcom-som.dtsi"
|
||||
|
||||
/ {
|
||||
model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)";
|
||||
compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som",
|
||||
"fsl,imx8mp";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
|
||||
clk_ext_audio_codec: clock-codec {
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24000000>;
|
||||
compatible = "fixed-clock";
|
||||
};
|
||||
|
||||
clk_xtal25: clk-xtal25 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <25000000>;
|
||||
};
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
data-role = "dual";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
usb_c_0_hs_ep: endpoint {
|
||||
remote-endpoint = <&dwc3_0_hs_ep>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
usb_c_0_ss_ep: endpoint {
|
||||
remote-endpoint = <&ptn5150_in_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-0 {
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
|
||||
label = "TA1-GPIO-A";
|
||||
linux,code = <KEY_A>;
|
||||
pinctrl-0 = <&pinctrl_dhcom_a>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-1 {
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
|
||||
label = "TA2-GPIO-B";
|
||||
linux,code = <KEY_B>;
|
||||
pinctrl-0 = <&pinctrl_dhcom_b>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-2 {
|
||||
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
|
||||
label = "TA3-GPIO-C";
|
||||
linux,code = <KEY_C>;
|
||||
pinctrl-0 = <&pinctrl_dhcom_c>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
button-3 {
|
||||
gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */
|
||||
label = "TA4-GPIO-E";
|
||||
linux,code = <KEY_E>;
|
||||
pinctrl-0 = <&pinctrl_dhcom_e>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
led {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <0>;
|
||||
gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */
|
||||
pinctrl-0 = <&pinctrl_dhcom_d>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <1>;
|
||||
gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
|
||||
pinctrl-0 = <&pinctrl_dhcom_f>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <2>;
|
||||
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */
|
||||
pinctrl-0 = <&pinctrl_dhcom_g>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
led-3 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <3>;
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
|
||||
pinctrl-0 = <&pinctrl_dhcom_i>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
reg_avdd: regulator-avdd { /* AUDIO_VDD */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "AUDIO_VDD";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
i2cmux@70 {
|
||||
compatible = "nxp,pca9540";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
i2cmuxed0: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
typec@3d {
|
||||
compatible = "nxp,ptn5150";
|
||||
reg = <0x3d>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ptn5150>;
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
ptn5150_in_ep: endpoint {
|
||||
remote-endpoint = <&usb_c_0_ss_ep>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
ptn5150_out_ep: endpoint {
|
||||
remote-endpoint = <&dwc3_0_ss_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
power-sensor@40 {
|
||||
compatible = "ti,ina238";
|
||||
reg = <0x40>;
|
||||
shunt-resistor = <20000>; /* 0.02 R */
|
||||
ti,shunt-gain = <1>; /* Drop cca. 40mV */
|
||||
};
|
||||
|
||||
eeprom_board: eeprom@54 {
|
||||
compatible = "atmel,24c04";
|
||||
pagesize = <16>;
|
||||
reg = <0x54>;
|
||||
};
|
||||
|
||||
pcieclk: clk@6b {
|
||||
compatible = "skyworks,si52144";
|
||||
reg = <0x6b>;
|
||||
clocks = <&clk_xtal25>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
i2cmuxed1: i2c@1 { /* HDMI DDC I2C */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&fec { /* Second ethernet */
|
||||
pinctrl-0 = <&pinctrl_fec_rgmii>;
|
||||
phy-handle = <ðphypdk>;
|
||||
phy-mode = "rgmii-id";
|
||||
|
||||
mdio {
|
||||
ethphypdk: ethernet-phy@7 { /* Micrel KSZ9131RNXI */
|
||||
compatible = "ethernet-phy-id0022.1642",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&pinctrl_ethphy1>;
|
||||
pinctrl-names = "default";
|
||||
reg = <7>;
|
||||
reset-assert-us = <1000>;
|
||||
/* RESET_N signal rise time ~100ms */
|
||||
reset-deassert-us = <120000>;
|
||||
reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&flexcan1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
clocks = <&pcieclk 1>;
|
||||
clock-names = "ref";
|
||||
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
fsl,max-link-speed = <3>;
|
||||
reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_dwc3_0 {
|
||||
usb-role-switch;
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dwc3_0_hs_ep: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&usb_c_0_hs_ep>;
|
||||
};
|
||||
|
||||
dwc3_0_ss_ep: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&ptn5150_out_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
fsl,disable-port-power-control;
|
||||
fsl,permanently-attached;
|
||||
};
|
||||
|
||||
&usb_dwc3_1 {
|
||||
/* This port has USB5734 Hub connected to it, PWR/OC pins are unused */
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ pinctrl-0;
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
/*
|
||||
* GPIO_A,B,C,E are connected to buttons.
|
||||
* GPIO_D,F,G,I are connected to LEDs.
|
||||
* GPIO_H is connected to USB Hub RESET_N.
|
||||
* GPIO_M is connected to CLKOUT2.
|
||||
*/
|
||||
pinctrl-0 = <&pinctrl_hog_base
|
||||
&pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k
|
||||
&pinctrl_dhcom_l
|
||||
&pinctrl_dhcom_int>;
|
||||
|
||||
pinctrl_ptn5150: ptn5150grp {
|
||||
fsl,pins = <
|
||||
MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40000000
|
||||
>;
|
||||
};
|
||||
};
|
||||
@@ -12,7 +12,7 @@ CONFIG_ENV_SIZE=0x10000
|
||||
CONFIG_ENV_OFFSET=0xFE0000
|
||||
CONFIG_ENV_SECT_SIZE=0x1000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="imx8mp-dhcom-pdk2"
|
||||
CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-dhcom-pdk2"
|
||||
CONFIG_SPL_TEXT_BASE=0x920000
|
||||
CONFIG_TARGET_IMX8MP_DH_DHCOM_PDK2=y
|
||||
CONFIG_DM_RESET=y
|
||||
@@ -48,7 +48,7 @@ CONFIG_USE_BOOTARGS=y
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
CONFIG_BOOTCOMMAND="run dh_update_env distro_bootcmd ; reset"
|
||||
CONFIG_USE_PREBOOT=y
|
||||
CONFIG_DEFAULT_FDT_FILE="imx8mp-dhcom-pdk2.dtb"
|
||||
CONFIG_DEFAULT_FDT_FILE="freescale/imx8mp-dhcom-pdk2.dtb"
|
||||
CONFIG_SYS_CBSIZE=2048
|
||||
CONFIG_SYS_PBSIZE=2081
|
||||
CONFIG_CONSOLE_MUX=y
|
||||
@@ -143,6 +143,8 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
|
||||
CONFIG_PARTITION_TYPE_GUID=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_UPSTREAM=y
|
||||
CONFIG_OF_UPSTREAM_INCLUDE_LOCAL_FALLBACK_DTBOS=y
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_NOWHERE=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
|
||||
@@ -12,7 +12,7 @@ CONFIG_ENV_SIZE=0x10000
|
||||
CONFIG_ENV_OFFSET=0xFE0000
|
||||
CONFIG_ENV_SECT_SIZE=0x1000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="imx8mp-dhcom-pdk3"
|
||||
CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-dhcom-pdk3"
|
||||
CONFIG_SPL_TEXT_BASE=0x920000
|
||||
CONFIG_TARGET_IMX8MP_DH_DHCOM_PDK2=y
|
||||
CONFIG_DM_RESET=y
|
||||
@@ -50,7 +50,7 @@ CONFIG_USE_BOOTCOMMAND=y
|
||||
CONFIG_BOOTCOMMAND="run dh_update_env distro_bootcmd ; reset"
|
||||
CONFIG_USE_PREBOOT=y
|
||||
CONFIG_PREBOOT="gpio clear GPIO1_11 ; sleep 0.1 ; gpio set GPIO1_11 ; sleep 0.1 ; i2c dev 4 && i2c mw 0x70 0 4 && i2c probe 0x2d && i2c mw 0x2d 0xaa55.2 0"
|
||||
CONFIG_DEFAULT_FDT_FILE="imx8mp-dhcom-pdk3.dtb"
|
||||
CONFIG_DEFAULT_FDT_FILE="freescale/imx8mp-dhcom-pdk3.dtb"
|
||||
CONFIG_SYS_CBSIZE=2048
|
||||
CONFIG_SYS_PBSIZE=2081
|
||||
CONFIG_CONSOLE_MUX=y
|
||||
@@ -146,6 +146,8 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=flash@0:-(sf)"
|
||||
CONFIG_PARTITION_TYPE_GUID=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_UPSTREAM=y
|
||||
CONFIG_OF_UPSTREAM_INCLUDE_LOCAL_FALLBACK_DTBOS=y
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_NOWHERE=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
|
||||
Reference in New Issue
Block a user