To mx6sabreauto and mx6sabresd, power_init_board is called in board_r phase.
After CONFIG_SPL_DM_PMIC_PFUZE100 included, there will be build error to build
power_init_board() when CONFIG_SPL_DM_PMIC_PFUZE100 is not enabled.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The global data (gd) area is already zeroed in
board_init_f_init_reserve() before board_init_f() is called.
Remove the duplicate gd clearing from board_init_f().
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The global data (gd) area is already zeroed in
board_init_f_init_reserve() before board_init_f() is called.
Remove the duplicate gd clearing from board_init_f().
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The global data (gd) area is already zeroed in
board_init_f_init_reserve() before board_init_f() is called.
Remove the duplicate gd clearing from board_init_f().
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The global data (gd) area is already zeroed in
board_init_f_init_reserve() before board_init_f() is called.
Remove the duplicate gd clearing from board_init_f().
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The global data (gd) area is already zeroed in
board_init_f_init_reserve() before board_init_f() is called.
Remove the duplicate gd clearing from board_init_f().
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The global data (gd) area is already zeroed in
board_init_f_init_reserve() before board_init_f() is called.
Remove the duplicate gd clearing from board_init_f().
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Currently, the board specific code evaluates only the first Ethernet
MAC address fuse, regardless of whether the first or second MAC
address is requested. When the function to determine the second
Ethernet MAC address is looking for the fused MAC address, it only
reads the first MAC address fuse and increment it by one to set
the second Ethernet MAC address. That is not the expected behavior
when two MAC addresses are fused, because this causes the second
fused MAC address to be ignored. Change this so that the second
fused MAC address will be used.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@nabladev.com>
The TQMa7x is a SoM family with a pluggable board connector based on the
i.MX7 SoCs. Add support for the SoM and its combination with our
MBa7x carrier board.
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
Replace unbounded sprintf() with snprintf() using sizeof(message)
as the bound for all prompt string assignments in
get_cfgblock_interactive(), get_cfgblock_carrier_interactive(),
do_cfgblock_carrier_create() and do_cfgblock_create(). The
previous calls had no size limit and could overflow the
CONFIG_SYS_CBSIZE-sized stack buffer if SYS_CBSIZE was configured
smaller than the longest prompt string (71 bytes).
Fixes: 8b6dc5d394 ("toradex: tdx-cfg-block: Cleanup interactive cfg block creation")
Signed-off-by: Ngo Luong Thanh Tra <S4210155@student.rmit.edu.au>
To: u-boot@lists.denx.de
Replace unbounded sprintf() with snprintf() using sizeof(info) as
the bound when constructing the board_name string from bdname and
bdtype. The previous call had no size limit and could overflow the
64-byte stack buffer if the concatenated string exceeded 63 bytes.
Fixes: c9c36bf56e ("samsung: misc: use board specific functions to set env board info")
Signed-off-by: Ngo Luong Thanh Tra <S4210155@student.rmit.edu.au>
To: u-boot@lists.denx.de
Replace unbounded strcpy()/sprintf() calls with snprintf() and
check the return value against remaining buffer capacity at each
append step. The previous size guard did not account for
subsequent dpi suffix, remaining bootargs tail, and bootdev
token appends, allowing overflow when those later writes exceed
the remaining space.
Fixes: d1611086e0 ("arm: add support for SoC s5p4418 (cpu) / nanopi2 board")
To: u-boot@lists.denx.de
Signed-off-by: Ngo Luong Thanh Tra <S4210155@student.rmit.edu.au>
Tested-by: Stefan Bosch <stefan_b@posteo.net>
The 64-bit R-Car board code is currently unbuildable on 32-bit ARM
cores. Skip DRAM initialization bits to make the code compatible with
these cores, because those cores do not use the DRAM, they only use
SRAM.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Replace s_init() early initialization at the end of lowlevel_init
by invoking the same code in mach_cpu_init(). The mach_cpu_init()
is called a bit later, but as the code initializes timer and no
code uses timer until mach_cpu_init(), this does not pose a problem.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
AM62d currently shares resource management configuration files with
AM62a. However, AM62a resource management needs to be modified for DMA
resource sharing scheme for CPSW3G Ethernet functionality to support
multi-core traffic handling.
Add separate AM62d-specific resource management configuration files to
decouple from the AM62a changes and maintain proper resource allocation
for AM62d.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
This is the first wave of MediaTek changes for this merge window. We
also expect to be sending another decent-sized pull request later for
the backlog of patches that are currently waiting on dependencies or
need little more time for review.
* Fixes for cargo-culted issues in mach-mediatek init.c files.
* Some consistency cleanups of recently added Genio boards (510/700/1200).
* Some pinctrl improvements to support newer MediaTek SOCs (mt8189 compatible).
* New devicetree and config for Genio 520/720 EVK boards (can boot to eMMC or SD).
* New CPU-specific functions to read vendor-specific CPU info at runtime.
Define CONFIG_SYS_SOC in the mach-sc5xx Kconfig. Follow the standard
U-Boot include path convention by moving the SC5xx SoC headers from
arch/arm/include/asm/arch-adi/sc5xx/ to the conventional
arch/arm/include/asm/arch-sc5xx/ location. Update includes from
<asm/arch-adi/sc5xx/*.h> to <asm/arch/*.h> across mach-sc5xx and board
files.
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
The U_BOOT_DRIVER macro creates a list of drivers used at link time, and
all entries here must be unique. This in turn means that all entries in
the code should also be unique in order to not lead to build failures
later with unexpected build combinations. Typically, the problem we have
here is when a driver is obviously based on another driver and didn't
update this particular field and so while the name field reflects
something unique the linker entry itself is not. In a few places this
provides a more suitable string name as well, however.
Reviewed-by: Marek Vasut <marek.vasut+usb@mailbox.org>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # Tegra
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Add U-Boot-specific device tree overrides for the Genio 520 and 720 EVK
boards. These are needed to enable SD card support in U-Boot due to
current driver limitations. It is expected that these files will remain
after eventually converting these to CONFIG_OF_UPSTREAM, so we use
separate .u-boot.dtsi files for this.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260316-mtk-ext-mmc-boot-v1-2-1aae51a44705@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Today we typically enable CMD_SATA in order to have the SATA
functionality itself enabled, despite there being a clean split between
the two symbols. This in turn leads to potential configuration problems.
Split things so that SATA continues to be separate and not CMD_SATA
instead depends, functionally, on AHCI being enabled.
To do all of this:
- Have X86 select AHCI directly rather than "default y" it later.
- Make CMD_SATA be a default y option, given the split of platforms that
enabled SATA and did, or did not, enable CMD_SATA.
- Change "imply CMD_SATA" to "imply SATA"
- Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL
without PCI (and in turn, SATA is needed for SATA_SIL).
- Update a number of defconfigs to have no functional change.
Signed-off-by: Tom Rini <trini@konsulko.com>
It is not functionally possible to use the code enabled by
PARTITION_TYPE_GUID without having EFI_PARTITION be enabled as well. Not
all users of the former had ensured that the latter was enabled however,
so audit all current users and then as appropriate select or imply
EFI_PARTITION as needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
Add MAINTAINERS file containing board-specific information and
the name of the board maintainer.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Introduce timing patch which converts 2 GiB DRAM timings to 4 GiB 1-rank
timings. This is a new configuration which carries IS43LQ32K01B DRAM part.
The 512 MiB SoM strapping that was never used is repurposed for this part.
Signed-off-by: Marek Vasut <marex@nabladev.com>
The 2 GiB and 4 GiB 2-rank DRAM timings on i.MX8MP DHCOM are very
similar. Instead of carrying around two copies of almost identical
timing tables, implement a patch of the 2 GiB table to convert it
into 4 GiB 2-rank table and pass the result to DRAM initialization
code. This saves us 13640 Bytes in SPL, and frees up space for more
DRAM initialization tables.
Signed-off-by: Marek Vasut <marex@nabladev.com>
The DRAM size tables are shared by SPL and U-Boot proper, deduplicate
those tables into lpddr4_timing.h . No functional change.
Signed-off-by: Marek Vasut <marex@nabladev.com>
The inline ECC configuration is identical for 2 GiB DRAM variants
and 4 GiB DRAM variants of the SoM, no matter the rank count. Fold
the ECC configuration directly into spl.c to simplify the upcoming
deduplication. No functional change.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Allow CONFIG_OF_UPSTREAM to receive automatic device tree updates for
the Toradex SMARC iMX95.
Remove the now obsolete device tree files:
- imx95-toradex-smarc-dev.dts
- imx95-toradex-smarc.dtsi
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
