With the latest v11.02.09 TIFS firmware, an additional
virtual interrupt and event is reserved for MCU cores
to DM usage on am62x devices.
Update the rm-cfg to reflect this new reservation.
Signed-off-by: Sparsh Kumar <sparsh-kumar@ti.com>
The am62x platform was originally introduced without a
tifs-rm-cfg.yaml file. Add the tifs-rm-cfg to bring am62x
in line with other am62 family of devices (am62px and am62a)
which all include this file.
This complements the rm-cfg update earlier in this series.
Signed-off-by: Sparsh Kumar <sparsh-kumar@ti.com>
Synchronize tifs-rm-cfg file with the latest v11.02.09
TIFS firmware rm configuration:
- Update am62px tifs-rm-cfg with revised resource allocations
- Apply formatting updates to align with TIFS template
This brings tifs-rm-cfg in sync with the rm-cfg changes
earlier in this series.
Signed-off-by: Sparsh Kumar <sparsh-kumar@ti.com>
With the latest v11.02.09 TIFS firmware, an additional
virtual interrupt and event is reserved for MCU cores
to DM usage on am62x, am62ax and am62px devices.
Update the rm-cfg to reflect this new reservation.
Signed-off-by: Sparsh Kumar <sparsh-kumar@ti.com>
A fix:
* Fixing compiling MT8195 due to some independent changes that were applied
around the same time as MT8195 support was merged. (CI would not have caught
this since we didn't have a defconfig until now).
And few small features:
* New defconfig for MT8395/Genio 1200 EVK.
* pinctrl support for MT8189-compatible SoCs.
This commit adds an FDT entry for the d0 stepping of the BCM2712 SoC.
This entry is used by the v1.1 revision of the board
(revision & 0x0f == 1).
Signed-off-by: Filip Kokosiński <filip.kokosinski@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
This patch adds support for multiple FDT files per board model. This is
done by adding the FDTFILES macro, which initializes two rpi_model
struct members: fdtfiles and fdtcount.
The new-style revision codes designate LSB bits as board revision; this
value is used to choose between provided FDTs. The first element of the
fdtfiles list is used should no revision match.
Signed-off-by: Filip Kokosiński <filip.kokosinski@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Pass the VC logs DT parameter through to the kernel
device tree. This is used by the vclog tool and is
a useful debugging tool.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Matthias Brugger <mbrugger@suse.com>
Enable firmware TPM (fTPM) support via OP-TEE for K3 platforms with
MMC hardware. This provides TPM 2.0 functionality through
Microsoft's fTPM Trusted Application running in OP-TEE secure world,
using eMMC RPMB as persistent storage.
fTPM support in U-Boot provides the foundation for measured boot
and disk encryption use cases.
The ARM64 condition ensures these apply only to A53/A72 cores and the
MMC condition ensures fTPM is enabled only on platforms with eMMC
hardware support.
Signed-off-by: Shiva Tripathi <s-tripathi1@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Rework the boot state machine to a significantly simpler and more
robust implementation. The basic idea is to revert to the previous
partition whenever an issue is detected during the boot process.
- Broken SPL
If one of the two SPLs does not boot, the ROM code of the i.MX8 SoC
automatically starts the second SPL from the second boot partition.
For example, if the system's active partition is A but the SPL from
partition A is broken, the ROM code automatically uses the SPL/u-boot
from partition B.
Proceeding with this boot procedure would lead to booting the kernel/
rootfs from partition A, which could potentially successfully boot
the system and allow the user to apply the firmware update with the
broken SPL again. This would lead to a non-bootable system because
the second update would overwrite the last working bootloader.
To prevent such situations, zigzag boots are detected and the system
reverts to the previous partition rather than booting the kernel/rootfs
from the currently active partition. Detecting zigzag boots is done
via the new fallback variable.
To make this state machine even more consistent, the partitionset_active
variable is no longer used to determine the active partition during
boot. Instead, the active partition is always read from the eMMC
partconf registers.
For backward compatibility, the partitionset_active variable is still
updated whenever a partition switch occurs. However, u-boot no longer
relies on this variable, as it could potentially be out of sync with
the actual partition state, leading to situations where the ROM code
of the i.MX8 SoC would be out of sync with u-boot.
- Broken kernel, initramfs or rootfs
If the upgrade_available variable is set, u-boot counts the number of
consecutive boots via the bootcount variable. If the bootcount exceeds
the bootlimit variable, u-boot starts the altbootcmd instead of the
bootcmd. Previously, this logic was bypassed by assigning the regular
bootcmd to altbootcmd. Now, the altbootcmd is used to revert to the
previous partition when the bootlimit is exceeded.
The netdev variable is changed to eth0 by default. This is what the FEC
driver uses on Capricorn boards. For devices with switches and DSA
subsystems in use, the netdev should be set accordingly by additional
logic in the environment or u-boot code. This is not part of this commit.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
When dtb_name is missing or a configuration is missing, try to
boot the default configuration in the image. The call to bootm needs
the correct loadaddr to succeed.
Fixes booting when factoryset is missing.
Signed-off-by: Walter Schweizer <walter.schweizer@siemens.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
drop Environment variable mmcautodetect and the board logic
behind it, as we want always to autodetct the emmc device.
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
add logic in board code for detecting the real boot
partition and set a local hush shell variable fallback
which can be used later in boot variables for detecting
a ROM bootloader fallback case.
We use the local hush shell variable, as we do not want
to save in any case the fallback variable in U-Boot
Environment, as the default Environment is maybe saved
in boards, which are downgraded to older U-Boot versions.
And than the board code does not run, and fallback never
gets the correct value.
Introduce also hush shell variable envvers to value "v2_"
so we can use them in Environment for running different
versions of variables between new and old U-Boot images.
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Signed-off-by: Walter Schweizer <walter.schweizer@siemens.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
In case board is booted from USB, enter fastboot by default to enable
the UUU flashing. In case of abort continue with the regular bootstd
scan. User also has possibility to override the default bootcmd from
the environment. Last but not least, this syncs behavior with other
PHYTEC boards from the i.MX family.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Benjamin Hahn <B.Hahn@phytec.de>
When booting from eMMC, there is error log:
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... MMC: no card present
Add board_mmc_get_env_dev() to get the correct device number.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Both the two boards have clk framework enabled, so rely on serial driver
calling clk_enable to enable the uart clk.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add support for EFI capsule updates via U-Boot's DFU. This flashes the
boot partition with the new image provided in the capsule.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Some distributions tend to provide a single combined image with EFS and
the system root filesystem. Flashing it as-is in a single partition
(usually done in userdata partition as it is the largest) is not
bootable as U-Boot does not understand subpartitions.
Use blkmap to map the userdata partition into its own block device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
STM32MP21 application processors (STM32 MPUs) based on a single
Arm Cortex®-A35 core running up to 1.5 GHz and Cortex®-M33 core
running at 300 MHz.
It is pin-compatible with the STM32MP2 series in the VFBGA361
10×10 mm package: the STM32MP21 uses a subset of the STM32MP23
pinout, which itself is a subset of the STM32MP25.
More details available here :
https://www.st.com/en/microcontrollers-microprocessors/stm32mp2-series.html
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
class_get_device_by_driver()'s return value is not checked, in case of BSEC
driver is not probed, dev is not set and used just after as parameter of
misc_read() which leads to a Synchronous Abort.
Add uclass_get_device_by_driver()'s return value check to fix it.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
As explained in commit 03d2d5fc00 ("board: sifive: unmatched: set
fdtfile with unquoted variable.") using the syntax of
'fdtfile=CONFIG_DEFAULT_FDT_FILE' in the plain text environment files
will lead to extraneous and problematic "s in the output. This is fixed
by using fdtfile=DEFAULT_FDT_FILE which was introduced recently.
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
OF_BOARD allows to choose the internal device tree in runtime. Use it to
pass the external FDT as an internal one if it is not present. This
approach is also used by qcom-phone, and it reduces boot image size. It
is expected that an external FDT is present as U-Boot is packaged as an
Android boot image.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
MULTI_DTB_FIT allowed a single U-Boot image to be booted in multiple
devices, but it was not a scalable solution; as more devices are added,
the U-Boot binary is bound to increase, space taken up by devicetrees
which are not even used.
The other approach is to be able to build separate images for multiple
devices using the same "board" defined in U-Boot. This is used by
qcom_phone to support muitiple devices.
Follow the said approach for Exynos devices as well, disable
MULTI_DTB_FIT for this board.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Move environment variable setup procedure to exynos_env_setup(). This
function is independent of data from exynos_board_info as it is due for
removal in the succeding commits.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Remove the baked-in bank addresses used for figuring out RAM banks from
device tree. Instead, sequentially fill in the bank addresses and sizes,
and doing away with an extra array for specifying bases.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Update am62ax and am62dx tifs-rm-cfg with allocation entries for C7x
core to match with their rm-cfg. Following updates are added for C7x:
- Share split BCDMA tx and rx channels between DM R5 and C7x.
- Share rings for split BCDMA tx and rx channels between DM R5 and C7x.
- Add global events and virtual interrupts for C7x.
Fixes: 01e0127753 ("am62a: yaml: Add board configs for AM62ax")
Signed-off-by: Sparsh Kumar <sparsh-kumar@ti.com>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
We currently provide default board names for each board in their
respective evm.c file. However for custom boards, this behaviour
overwrites the default DT as set in the defconfig
(CONFIG_DEFAULT_FDT_FILE or CONFIG_DEFAULT_DEVICE_TREE).
This patch changes the default name to be NULL which prevents this
overwrite and allows ti_set_fdt_env to instead fallback to the correct
DT as set in Kconfig.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
This adds support for the MT8370 EVK board with the following
features enabled/tested: Boot, UART, Watchdog and MMC.
MT8370 is based on MT8188.
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Consolidate all mem_map definitions for MediaTek ARMv8 platforms into a
single file. The size of the DDR and MMIO regions can vary, so Kconfig
options are added to configure them by target.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Move the mt8365_evk and mt8390_evk MAINTAINERS files to a common
MAINTAINERS file. We will be deleting the board-specific directories
soon but we need to keep the MAINTAINERS for the defconfig entries.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Peng Fan (OSS) <peng.fan@oss.nxp.com> says:
This patch set primarily removes unused DECLARE_GLOBAL_DATA_PTR
instances.
Many files declare DECLARE_GLOBAL_DATA_PTR and include
asm/global_data.h even though gd is never used. In these cases,
asm/global_data.h is effectively treated as a proxy header, which is
not a good practice.
Following the Include What You Use principle, files should include
only the headers they actually depend on, rather than relying on
global_data.h indirectly. This approach is also adopted in Linux kernel
[1].
The first few patches are prepartion to avoid building break after
remove the including of global_data.h.
A script is for filtering the files:
list=`find . -name "*.[ch]"`
for source in ${list}
do
result=`sed -n '/DECLARE_GLOBAL_DATA_PTR/p' ${source}`
if [ "${result}" == "DECLARE_GLOBAL_DATA_PTR;" ]; then
echo "Found in ${source}"
result=`sed -n '/\<gd\>/p' ${source}`
result2=`sed -n '/\<gd_/p' ${source}`
result3=`sed -n '/\<gd->/p' ${source}`
if [ "${result}" == "" ] && [ "${result2}" == "" ] && [ "${result3}" == "" ];then
echo "Cleanup ${source}"
sed -i '/DECLARE_GLOBAL_DATA_PTR/{N;/\n[[:space:]]*$/d;s/.*\n//;}' ${source}
sed -i '/DECLARE_GLOBAL_DATA_PTR/d' ${source}
sed -i '/global_data.h/d' ${source}
git add ${source}
fi
fi
done
[1] https://lpc.events/event/17/contributions/1620/attachments/1228/2520/Linux%20Kernel%20Header%20Optimization.pdf
CI: https://github.com/u-boot/u-boot/pull/865
Link: https://lore.kernel.org/r/20260209-cleanup-v2-0-73a3a84ddbdb@nxp.com
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.
Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards
Acked-by: Yao Zi <me@ziyao.cc> #TH1520
Signed-off-by: Peng Fan <peng.fan@nxp.com>
struct bd_info is defined in asm-generic/u-boot.h. Include it to avoid
building error after asm/global_data.h are removed from this file.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
There is no user of gd, drop the usage of DECLARE_GLOBAL_DATA_PTR and
the including of "asm/global_data.h". Include config.h to avoid
build error.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
There is no user of 'gd', so drop the usage of DECLARE_GLOBAL_DATA_PTR
and the including of 'asm/global_data.h'. Also include correct headers
to avoid build error.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Include linux/types.h and asm-generic/u-boot.h. Missing the two header
files will cause building error after cleaning up usage of
asm/global_data.h.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
