Aristo Chen <aristo.chen@canonical.com> says:
The get_basename() helper in tools/fit_image.c searches the entire input
path independently for the last '/' and the last '.'. When the last '.'
falls at an offset earlier than the last '/', for example "./mydt",
"a.b/c" or "sub.d/leaf", 'end' points before 'start' and the computed
length is negative. The size check uses signed comparison so the negative
value flows unchanged into memcpy() (cast to size_t there) and mkimage
segfaults during -f auto FIT generation. The helper is reached on every
auto-FIT build via the -b, --fit-tee and --fit-tfa-bl31 file arguments.
The first patch restricts the dot search to the substring that follows
the last slash, which is the minimal fix and preserves the existing
behaviour for typical inputs such as "arch/arm/dts/foo.dtb".
The second patch adds a parametrized sandbox test under
test/py/tests/test_fit_mkimage_validate.py that drives mkimage -f auto
with each of the crashing inputs ("./mydt", "./sub.d/leaf", "./a.b/c")
plus one control input ("./mydt.dtb"). The test reads the resulting
/images/fdt-1 description back from the produced FIT via fdtget to verify
get_basename()'s output matches the expected stripped basename.
Reproducer that previously segfaulted and now produces a valid image:
echo dummy > kernel.bin
echo dummy > ./mydt
./tools/mkimage -f auto -A arm -O linux -T kernel -C none \
-a 0x80000000 -e 0x80000000 -n test \
-d kernel.bin -b ./mydt out.itb
Verified by rebuilding tools/mkimage on master and running the command
above with each of the four parametrized inputs. The three crash triggers
all segfault before the fix and now produce the expected fdt-1
descriptions ("mydt", "leaf", "c"); the control input "./mydt.dtb"
continues to produce "mydt" as before.
Link: https://lore.kernel.org/r/20260526070336.23199-1-aristo.chen@canonical.com
Add a parametrized regression test for the fix in the previous commit.
The test invokes mkimage in auto-FIT mode (-f auto) with a -b argument
whose directory component contains a '.' and whose leaf either lacks an
extension or is a plain identifier. Before the fix these inputs caused
get_basename() to compute a negative length and segfault inside memcpy.
The test asserts that mkimage exits successfully and that the fdt
sub-image description matches the expected stripped basename, covering
"./mydt", "./sub.d/leaf", and "./a.b/c". A control input of "./mydt.dtb"
is also exercised to confirm normal extension stripping still works.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Rasmus Villemoes <rv@rasmusvillemoes.dk> says:
The commit message for patch 1 explains what it is I'd like to be able
to do, but here's some more background:
For a long time, we've embedded the boot script in the U-Boot binary
by building a bootscript.itb, and using a .dtsi like
/ {
config {
bootscript = /incbin/("/path/to/bootscript.itb");
};
};
which in turn is mentioned in CONFIG_DEVICE_TREE_INCLUDES, that
bootscript.itb FIT image has been embedded in U-Boot's control
dtb. Running that was then a matter of doing
fdt addr ${fdtcontroladdr} && fdt get addr bsaddr /config bootscript && source ${bsaddr}
There are a couple of advantage of having the bootscript (and other
script logic) embedded in the U-Boot binary. First, there's no need to
figure out some separate partition to store the script in, and making
sure that gets updated whenever the bootloader itself does. Second,
one doesn't need to worry about verifying the script; whatever steps
one needs to take to implement secure boot for U-Boot itself will by
necessity also cover the control dtb (if nothing else then because
that's where the public key for the kernel verification lives). And
third, the boot script is automatically updated together with U-Boot
itself; and if U-Boot is stored in an eMMC boot partition, that update
is guaranteed to be atomic.
Now with the stricter requirements of libfdt starting from v2026.04,
the above command no longer worked, or only half the time, because the
embedded FIT image may not land on an 8-byte aligned address. So that
line had to be changed a little (line breaks added)
fdt addr ${fdtcontroladdr}
&& fdt get addr bsaddr /config bootscript
&& fdt get size bssize /config bootscript
&& cp.b ${bsaddr} ${loadaddr} ${bssize}
&& source ${loadaddr}
which is getting quite unwieldy.
Then it struck me that one could perhaps simplify all of this quite a
lot: Cut out the intermediate bootscript.itb, just create a .dtsi
which directly puts a /images node inside the control dtb
/ {
images {
default = "bootscript";
bootscript {
description = "Boot script";
data = /incbin/("/path/to/bootscript.sh");
type = "script";
compression = "none";
};
};
};
and treat the control dtb itself as a FIT image; so the command to put
in $bootcmd becomes simply
source ${fdtcontroladdr}:bootscript
and embedding other pieces of callable scripts is quite trivial.
And that almost works out-of-the-box, except for the fit_check_format() sanity check.
Introduce a CONFIG_ knob that allows one to opt out of those sanity
checks, for the special case of the address being checked being
identical to gd->fdt_blob.
Link: https://lore.kernel.org/r/20260602213013.558064-1-rv@rasmusvillemoes.dk
Add a test demonstrating how one can embed various scripts in the
control DTB.
Verify that the source command can be used with ${fdtcontroladdr} by
itself (invoking the default script), and with :<node-name>
suffix. Check that the scripts themselves can invoke "sibling"
scripts. Also verify that without CONTROL_DTB_AS_FIT set, the control
DTB is not accepted by the source command.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Add a sandbox reset controller compatible string
"sandbox,reset-ctl-fallback-only" that reuses the existing sandbox assert,
deassert, request, and free helpers but omits rst_reset. That forces
reset_reset() through the core assert / udelay / deassert fallback.
Extend the reset-ctl-test DT node with a fifth reset line named "fallback"
that points at the new provider, and add dm_test_reset_reset_fallback_path
which verifies sandbox_reset_get_count() stays zero (rst_reset is never
invoked) while the line ends deasserted after reset_reset().
This complements the existing rst_reset coverage on sandbox,reset-ctl and
matches the approach of using a separate controller to exercise the
fallback path in unit tests.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/c1d40db6e2332a8b23ba842385b3f8c3d0290109.1779709539.git.michal.simek@amd.com
If the filesystem creation attempted by the FsHelper class fails, the
invocation of the cleanup function will cause a TypeError exception,
because the path of the filesystem itself, fed to os.remove(), will be
None. This will lead to a test failure even in case a skip is instead
wanted.
Such an exception will lead to a backtrace like this:
test/py/tests/test_fs/conftest.py:269: in fs_obj_basic
fsh.mk_fs()
test/py/tests/fs_helper.py:70: in mk_fs
self.fs_img = mk_fs(self.config, self.fs_type, self.size_mb << 20,
test/py/tests/fs_helper.py:246: in mk_fs
check_call(f'mkfs.{fs_lnxtype} {mkfs_opt} {fs_img}', shell=True,
/usr/lib64/python3.14/subprocess.py:420: in check_call
raise CalledProcessError(retcode, cmd)
E subprocess.CalledProcessError: Command '<...>' returned non-zero exit status 1.
During handling of the above exception, another exception occurred:
test/py/tests/test_fs/conftest.py:272: in fs_obj_basic
pytest.skip('Setup failed for filesystem: ' + fs_type + '. {}'.format(err))
E Skipped: Setup failed for filesystem: ext4. Command '<...>' returned non-zero exit status 1.
During handling of the above exception, another exception occurred:
test/py/tests/test_fs/conftest.py:277: in fs_obj_basic
fsh.cleanup()
test/py/tests/fs_helper.py:91: in cleanup
os.remove(self.fs_img)
E TypeError: remove: path should be string, bytes or os.PathLike, not NoneType
Fix this by checking if the variable containing the filesystem path is
valid before attempting to call os.remove() on it.
Fixes: 3691b1e4ce ("test: Convert fs_helper to use a class")
Signed-off-by: Francesco Valla <francesco@valla.it>
Daniel Golle <daniel@makrotopia.org> says:
This series adds dm-verity support to U-Boot's FIT image infrastructure.
It is the first logical subset of the larger OpenWrt boot method series
posted as an RFC in February 2026 [1], extracted here for independent
review and merging.
OpenWrt's firmware model embeds a read-only squashfs or erofs root
filesystem directly inside a uImage.FIT container as a FILESYSTEM-type
loadable FIT image. At boot the kernel maps this sub-image directly from
the underlying block device via the fitblk driver (/dev/fit0, /dev/fit1,
...), the goal is that the bootloader never even copies it to RAM.
dm-verity enables the kernel to verify the integrity of those mapped
filesystems at read time, with a Merkle hash tree stored contiguously in
the same sub-image just after the data. Two kernel command-line
parameters are required:
dm-mod.create= -- the device-mapper target table for the verity device
dm-mod.waitfor= -- a comma-separated list of block devices to wait for
before dm-init sets up the targets (needed when fitblk
probes late, e.g. because it depends on NVMEM
calibration data)
The FIT dm-verity node schema was upstreamed into the flat-image-tree
specification [2], which this implementation tries to follow exactly.
The runtime feature is guarded behind CONFIG_FIT_VERITY. If not
enabled the resulting binary size remains unchanged. If enabled the
binary size increases by about 3kB.
[1] previous submissions:
RFC: https://www.mail-archive.com/u-boot@lists.denx.de/msg565945.html
v1: https://www.mail-archive.com/u-boot@lists.denx.de/msg569472.html
v2: https://www.mail-archive.com/u-boot@lists.denx.de/msg570599.html
v3: https://www.mail-archive.com/u-boot@lists.denx.de/msg573223.html
v4: https://www.mail-archive.com/u-boot@lists.denx.de/msg574000.html
[2] flat-image-tree dm-verity node spec:
795fd5fd7f
Link: https://lore.kernel.org/r/cover.1778887196.git.daniel@makrotopia.org
Add test/py/tests/test_fit_verity.py covering:
- mkimage writes correct dm-verity properties for matched and
mismatched block sizes (4096/4096 and 4096/1024);
- veritysetup verify re-checks the digest against the .itb's
external data section;
- mkimage rejects dm-verity images built without -E.
All tests are skipped if veritysetup is not installed on the host.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add test/boot/fit_verity.c with four tests that construct FIT blobs
in memory and exercise fit_verity_build_cmdline().
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Aristo Chen <aristo.chen@canonical.com> says:
This series ends with replacing the verbose fdt_next_node() + ndepth
idiom in boot/image-fit.c with fdt_for_each_subnode(), bringing the
file in line with boot/image-fit-sig.c. Six of the seven sites in
image-fit.c predate the macro by 2-6 years; the seventh was
copy-pasted from a neighbour in 2015 just after the macro landed.
The old idiom is legacy, not a deliberate technical choice.
Converting straight to the macro turned out to need a prerequisite,
which is patch 1. fit_print_contents() reads the default-config
property using the loop variable left over after iterating /images
children. With /images defined first in the source (the conventional
layout) libfdt's walker happens to leave that variable pointing at
/configurations and the read works. With /configurations defined
first the read returns NULL and the "Default Configuration" line is
silently omitted. fdt_for_each_subnode()'s post-loop value is
unconditionally a negative error code, so a naive conversion would
have made the missing line the unconditional behaviour. Patch 1
reads the property from confs_noffset directly and removes the
layout dependency.
Patch 2 adds a regression test for the configs-before-images
layout, which had no coverage.
Patch 3 is the mechanical conversion at all seven sites,
equivalence-preserving as described in the per-patch message.
Link: https://lore.kernel.org/r/20260508213217.3807786-1-aristo.chen@canonical.com
Add a test that builds a FIT whose /configurations node is defined
before /images in the source, runs iminfo, and asserts that the
"Default Configuration: '<name>'" line appears in the output.
Before the fix in the preceding commit ("boot/fit: read default-config
property from the configurations node"), fit_print_contents() read the
default-config property using the loop variable left over from iterating
/images children. With /images defined first that variable accidentally
pointed at /configurations and the line printed correctly; with
/configurations defined first the read returned NULL and the line was
silently omitted. The new test exercises the latter layout, which had
no coverage.
iminfo and the fit_print_contents() path had no test coverage at all
before this commit.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
test_fs/test_erofs.py and test_fs/test_squashfs/sqfs_common.py both
defined a generate_file() helper that writes a file of a given size
filled with 'x'. The two functions were functionally identical and
differed only in parameter names and docstrings.
Move the helper into the existing test/py/utils.py module, which is
the established home for generic test utilities (md5sum_file,
PersistentRandomFile, attempt_to_open_file). Update both call sites
to use it.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: joaomarcos.costa@bootlin.com
Reviewed-by: Simon Glass <sjg@chromium.org>
Rasmus Villemoes <ravi@prevas.dk> says:
There are quite a few places where we allocate X+1 bytes, initialize
the first X bytes via memcpy() and then set the last byte to 0.
The kernel has a helper for that, kmemdup_nul(). Introduce a similar
one, and start making use of it in a few places. Also the existing
memdup() helper can be put to more use.
There are lots more places one could modify. But for code shared with
host tools, one would need to do some refactoring, putting memdup()
and memdup_nul() in their own str-util.c TU which could then also be
included in the tools build.
Link: https://lore.kernel.org/r/20260421075439.16696-1-ravi@prevas.dk
Extend the 'part' command unit tests to include partition lookup via
UUID.
This ensures that the 'number', 'start', and 'size' subcommands
consistently handle UUIDs as partition identifiers, maintaining
parity with the name-based lookup functionality.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add unit tests for the 'part' command, specifically for the 'number',
'start', and 'size' subcommands.
These tests establish a baseline for the current partition lookup
functionality by name. This foundation will be used by subsequent
patches to extend the command, ensuring consistent behavior as new
features are introduced.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
When creating the RSDT and the XSDT table they contain no entries.
The table size therefore must equal the header size.
Without this change a NULL deference has been observed in
acpi_find_table() when running `ut dm` on sandbox64_defconfig
executed via `sudo ./u-boot -D`.
Fixes: 94ba15a3f1 ("x86: Move base tables to a writer function")
Fixes: 7e586f6907 ("acpi: Put table-setup code in its own function")
Fixes: ab5efd576c ("x86: acpi: Adjust order in acpi_table.c")
Fixes: 867bcb63e7 ("x86: Generate a valid ACPI table")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Update dm_test_acpi_ctx_and_base_tables() in test/dm/acpi.c to expect
sizeof(struct acpi_table_header) for the initial table length (instead
of sizeof(*rsdt) / sizeof(*xsdt)), and to compute the checksum over
header->length bytes rather than the full struct size:
Signed-off-by: Simon Glass <sjg@chromium.org>
test_fit.py declares a local make_fname closure that is byte-identical
to fit_util.make_fname. Drop the local copy and call the shared helper
at all seven call sites so there is one definition to maintain.
No behavioural change. Both implementations return
os.path.join(ubman.config.build_dir, basename).
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add sandbox DM unit tests for the PHY common properties library and the
corresponding device tree test nodes to arch/sandbox/dts/test.dts.
Also enable CONFIG_PHY_COMMON_PROPS in configs/sandbox_defconfig so
the tests are built and run in the sandbox environment.
The test file covers rx/tx polarity lookups for all relevant cases:
- missing property (defaults to PHY_POL_NORMAL)
- single value without names array (applies to all modes)
- count mismatch between values and names arrays (-EINVAL)
- name found by exact match
- name not found with no "default" fallback (-EINVAL)
- name not found with a "default" entry (uses fallback value)
- unsupported polarity value (-EOPNOTSUPP)
Ported from Linux KUnit test:
linux/drivers/phy/phy-common-props-test.c
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Add a unit test to verify that the SPI word length configuration is
correctly handled by the SPI uclass and successfully passed down to
the sandbox driver.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Quentin Schulz <foss+uboot@0leil.net> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/20260420-net-kconfig-v1-0-9900002d8e72@cherry.de
Since the move to make NET a menuconfig and NO_NET a synonym of NET=n,
when NET is enabled, NET_LEGACY || NET_LWIP is necessarily true, so
let's simplify the various checks across the codebase.
SPL_NET_LWIP doesn't exist but SPL_NET_LEGACY is an alias for SPL_NET so
the proper symbol is still defined in SPL whenever needed.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Highlight that NET really is the legacy networking stack by renaming the
option to NET_LEGACY.
This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise
CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL.
The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is
using the legacy networking app so this seems fine to do.
This also has the benefit of removing potential confusion on NET being a
specific networking stack instead of "any" network stack.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass <sjg@chromium.org> says:
This series reworks the FIT test (test_fit.py) to make it easier to
maintain and extend. It fixes the buildconfigspec so the test actually
runs on sandbox, avoids unnecessary U-Boot restarts, renames the main
test for easier selection, adds a missing-kernel check, fixes Python
warnings, converts the test to use a class, splits into separate test
functions, and adds Sphinx documentation.
Link: https://lore.kernel.org/r/20260413130007.1987326-1-sjg@chromium.org
Create an 'fsetup' fixture which sets up files and parameters, and a
prepare() helper which builds a FIT with given parameter overrides.
Update check_equal() and check_not_equal() to look up filenames from a
params dict by key, reducing the number of local variables needed.
Split the single test_fit_operations() into individual test functions so
that each appears separately in the results.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move this test over to use a class instead of a function, so we can
easily split it into some related tests.
Move the TODO so it is part of the comment for the class.
Tidy up some function comments while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current name is uses as a root name by a few other tests, such as
test_fit_ecdsa() which makes it hard to run just this test.
Rename it to test_fit_base()
Signed-off-by: Simon Glass <sjg@chromium.org>
We don't actually need to use the test FDT as the control FDT. It slows
down the test since U-Boot needs to be restarted each time.
Instead of restarting, update the test to clear memory before it loads
the FIT.
Rename the data-variable to fdt_data since is it no-longer the control
FDT.
Signed-off-by: Simon Glass <sjg@chromium.org>
The test_fit test requires buildconfigspec('fit_signature') but does
not exercise signature verification. The ITS template includes a
signature-1 node, but mkimage only needs TOOLS_FIT_SIGNATURE (a host
tool option) to handle it, not CONFIG_FIT_SIGNATURE in the U-Boot
binary.
Since sandbox does not enable CONFIG_FIT_SIGNATURE, the test is silently
skipped on every run. Change the marker to buildconfigspec('fit') which
is all the test actually needs.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current gzwrite() implementation is limited to 4 GiB compressed
input buffer size due to struct z_stream_s { uInt avail_in } member,
which is of type unsigned int. Current gzwrite() implementation sets
the entire input buffer size as avail_in and performs decompression
of the whole compressed input buffer in one round, which limits the
size of input buffer to 4 GiB.
Rework the decompression loop to use chunked approach, and decompress
the input buffer in up to 4 GiB - 1 kiB avail_in chunks, possibly in
multiple decompression rounds. This way, the compressed input buffer
size is limited by gzwrite() function 'len' parameter type, which is
unsigned long.
In case of sandbox build, include parsing of 'gzwrite_chunk'
environment variable, so the chunked approach can be thoroughly tested
with non default chunk size. For non-sandbox builds, the chunk size is
4 GiB - 1 kiB.
The gzwrite test case is extended to test various chunk sizes during
gzwrite decompression test.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Simon Glass <sjg@chromium.org> says:
This series adds a DiskHelper class and converts most test code to use
FsHelper and DiskHelper instead of calling mk_fs() and setup_image()
directly.
The FsHelper class (already upstream) provides a cleaner interface for
creating filesystem images, handling temporary directories and cleanup
automatically. The new DiskHelper class builds on this, creating
partitioned disk images from one or more FsHelper filesystems.
DiskHelper includes a cur_dir flag to place the disk image in the
current directory rather than the persistent-data directory. This
matches the behaviour of setup_image() which places disk images in
source_dir where sandbox expects to find them. This flag is needed for
now and should be removed in a follow-up once all tests are migrated to
use the persistent-data directory instead.
With these helpers, test-setup code becomes shorter, more consistent and
easier to follow. Manual sfdisk/dd/cleanup sequences are replaced by a
few method calls.
The series also fixes a broken fs_obj_fat fixture where a stale
size_gran argument is silently causing the test to be skipped.
A few EFI test fixtures (efi_capsule, efi_secboot, eficonfig) still use
mk_fs() directly; these are left for a follow-up series since they would
benefit from a full DiskHelper conversion.
Link: https://lore.kernel.org/r/20260404140328.3724864-1-sjg@chromium.org
Replace all direct calls to the mk_fs() function with FsHelper in the
filesystem test fixtures. Each fixture now creates an FsHelper instance,
populates its srcdir with test files, then calls mk_fs() on the object.
This removes manual scratch-directory management and cleanup code, since
FsHelper handles the source directory and image-file lifecycle.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use FsHelper and DiskHelper to create the RAUC A/B disk image. This
replaces the manual sfdisk and dd commands, making the code shorter
and easier to follow.
The same boot and root filesystems are added twice to produce the
A/B partition layout.
Signed-off-by: Simon Glass <sjg@chromium.org>
To permit easier adding of other images, move the Fedora-specific
portions of setup_bootflow_image() into a separate function.
Signed-off-by: Simon Glass <sjg@chromium.org>
