Our last sync with the kernel was 5.1. Even that was a partial one
as some patches from 4.x kernels were already missing making the
transition to a modern kbuild infeasible.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefile[.lib/.kbuild].
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call.
One of the biggest changes is get rid of partial linking entirely and
build .a archives isntead of .o.
We diaviate from the kernel on that. Instead of calling a custom script
to create the archive symbol table, we call ar with rcTP (isntead of
rcSTP) since we want a resulting archive that's sauble with the linker.
The only affected platforms are PPC ones. Unfortunately I don't have any
of them around to test, but the objdump of the resulting files --
arch/powerpc/lib/built-in.[oa] looks identical.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Since we are updating our kbuild system to 5.1, add the relevant
clang changes from upstream
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Pull request net-next-20250708
lwip:
- Call sys_check_timeouts() and schedule() on RX to fix an issue on
boards with a watchdog and simplify the code
- Enable IP_FRAG and IP_REASSEMBLY
- Add support for setting the TFTP blocksize at runtime
- Fix DNS initialization in wget
- Add the sntp command
- Move code from net/lwip/${cmd}.c to cmd/lwip/${cmd}.c
In DDR mode, even bytes are read using DMA, while the remaining odd
bytes are read using STIG mode. However, the data is not correctly
transferred into the flash read data lower register because the
supplementary byte of the STIG opcode is not being written to the
opcode extension register, resulting in incorrect data being read.
To resolve this issue, when using STIG transactions, the corresponding
supplementary byte of any STIG opcode must be defined in the Opcode
Extension Register (Lower). Issue has been observed on the Macronix
MX66UM2G45G flashes.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20250702053953.640046-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
tshsl_ns is the clock delay for chip select deassert. This is the delay in
master reference clocks for the length that the master mode chip select
outputs are de-asserted between transactions.
The minimum delay is always SCLK period to ensure the chip select is never
re-asserted within one SCLK period.
That is why tshsl_ns delay should be at least one sclk_ns value. If it is
less than sclk_ns, set it equal to sclk_ns.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20250702065717.3871435-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Starting from 'commit <8077d296adff> ("spi: cadence-quadspi: Use STIG
mode for all ops with small payload") the utilization of STIG mode
has been implemented for read and write operations involving less
than 8 bytes of data.
However, following this commit, encountering timeout issues occurs when
writing odd bytes of data in DDR mode, as indicated below:
"jedec_spi_nor flash@0: flash operation timed out
SF: 3 bytes @ 0x0 Written: ERROR -110"
To resolve this issue, the number of bytes to write has been updated
specifically for DDR mode.
Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20250704040444.671604-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Legacy SPI flash devices used a 24-bit (3-byte) addressing scheme,
limiting the addressable memory to 16 MB. To support larger densities
(256 Mbit and higher), extended addressing schemes, such as 32-bit
(4-byte) addressing, were introduced. If the flash density exceeds
16 MB and CONFIG_SPI_FLASH_BAR is disabled, the device will use a
4-byte addressing mode.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20250707043738.795179-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The clock driver fails to correctly calculate the PLL clock
rate for peripherals when using the DPLL as the clock source.
The DPLL operates within the full power domain, while peripheral
clocks reside in the low power domain. To ensure accurate PLL
clock rate computation when the peripheral clock source is set
to DPLL, the DPLL-to-LPD cross divisor is used.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20250618094329.296731-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
As part of the recent cleanup of dt-bindigns header files we did not
remove our copy of dt-bindings/clock/xlnx-zynqmp-clk.h at the time. This
is because the difference between ours and current upstream is that
current upstream has a #warning to not use it and to instead use
xlnx-zynqmp-clk.h. So we change zynqmp-clk-ccf.dtsi to use the other
and upstream-only file and then delete our dt-bindings file.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20250612181128.340232-1-trini@konsulko.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Enable the sntp command by default in the arm64 QEMU defconfig for lwIP
since this config is meant to have all the features supported by lwIP.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Add a proper documentation file for the sntp command in RST format and
drop doc/README.SNTP. The documentation now includes the NET_LWIP
specificities.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Extract the code that sets the RTC clock from sntp_handler() in
net/sntp.c and make it a new function net_sntp_set_rtc() in
net/net-common.c. This will allow re-use with NET_LWIP.
According to [1] it is safe to assume that all devices have been
converted to DM_RTC so drop the useless code.
[1] https://lists.denx.de/pipermail/u-boot/2025-June/591376.html
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Update the ping command so that a host name is accepted in addition to
an IP address, provided DNS support is enabled.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Add a helper fonction to convert an IP address (supplied as a text
string) or a host name to an ip_addr_t.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
When calling "dns <hostname> <varname>", do not print out the IP address
of <hostname> onto the console. Print it only when no variable is
passed. The reason is to be able to call do_dns() from another command
in need of the DNS services without polluting the output.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
The DNS loop checks for a non-zero IP address after DNS resolution, but
the address is in fact never copied into the context. Fix that.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Split net/lwip/wget.c in two: one part which implements CONFIG_WGET
stays in net/ while the part that implements CONFIG_CMD_WGET is moved
into cmd/.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Move each command in cmd/net-lwip.c into its own file
(cmd/lwip/${cmd}.c).
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Prepare to split the ping command from cmd/net-lwip.c by moving the
implementation from net/lwip/dns.c to cmd/lwip.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Prepare to split the dns command from cmd/net-lwip.c by moving the
implementation from net/lwip/dns.c to cmd/lwip.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Initialize dns servers if a hostname (vs ipaddr) is used in a URL.
Otherwise the wget will fail without displaying an error due to
dns_gethostbyname failing silently when no DNS servers are set unless
you have previously performed a 'dns <arg>' command.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
move the dns init including setting the dns servers from env vars to a
common function as other commands that support hostname lookups will
need this.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[jf: add CMD_DNS conditional to support NET_LWIP && !CMD_DNS]
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Add support for setting the blocksize at runtime via the tftpblocksize env
variable as such is done with the legacy stack (CONFIG_NET).
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Call schedule() in net_lwip_rx() to service U-Boot tasks and
actions during packet rx.
As a cleanup also move sys_check_timeouts() here and remove it from the
functions that call net_lwip_rx().
This resolves the issue of an active watchdog resetting the board on
long network activities.
Suggested-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Adjust legoev3_defconfig to reduce the binary output size.
As u-boot has bloated a bit over the years, the legoev3_defconfig can no
longer build something that fits in the 256kB size limit of the EV3.
This drops a few unused features, but the real difference-makers are
enabling thumb instructions and using link time optimization to reduce
the size.
This reduced u-boot.bin from 279,920 to 198,416 bytes on my local
machine with arm-none-eabi-gcc (15:13.2.rel1-2) 13.2.1 20231009.
HAS_BOARD_SIZE_LIMIT is also added to catch any future regressions.
Signed-off-by: David Lechner <david@lechnology.com>
The mx6sabresd U-Boot proper binary size has grown beyond the
CONFIG_BOARD_SIZE_LIMIT.
Reduce its size by removing the CONFIG_MULTI_DTB_FIT, BOOTM_PLAN9 and
BOOTM_RTEMS options.
According to doc/README.multi-dtb-fit:
"Usually the DTB is selected by the SPL and passed down to U-Boot. But some
platforms don't use the SPL. In this case MULTI_DTB_FIT can used to provide
U-Boot with a choice of DTBs"
mx6sabresd uses SPL, so MULTI_DTB_FIT can be safely dropped as the DTB
selection in SPL is done by board_fit_config_name_match().
Tested boot on the imx6dl and imx6q variants.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
