At present gd->ram_size is 0 in SPL, meaning that it is not possible to
enable the cache. Correct this by always populating the RAM size
correctly.
This increases code size by about 500 bytes in SPL, since it must call
the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Jiaxun Yang <jiaxun.yang@flygoat.com> says:
This is a subset of my previous arm64_be work.
I wish this could be merged first so it would be easier to work
against xtensa and arm64 be support.
So CONFIG_SYS_BIG_ENDIAN is our cross architecture option for
selecting machine endian, while the old CONFIG_CPU_BIG_ENDIAN
is defined by Arc only.
Use it whenever possible to ensure big endian code path is enabled
for all possible big endian machines.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
The linux kernel has the list_count_nodes() API functions which is
used for counting nodes of a list. This has now been imported in
U-Boot as part of an earlier commit. Use this function and drop the
list_count_items().
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> says:
v2 changes:
* Drop sw_blink_state structure, move its necessary fields to
led_uc_plat structure.
* Add cyclic_info pointer to led_uc_plat structure. This
simplify code a lot.
* Remove cyclic function search logic. Not needed anymore.
* Fix blinking period. It was twice large.
* Other cleanups.
v3 changes:
* Adapt code to recent cyclic function changes
* Move software blinking functions to separate file
* Other small changes
v4 changes:
* Refactoring of led_set_period() function
v5 changes
* Fix compilation if CONFIG_LED_BLINK is not defined
v6 changes:
* Enable LEDST_BLINK state unconditionally.
* Function led_set_period() becomes available when CONFIG_LED_BLINK
is disabled. This makes led code simpler.
* Software blinking requires about 100 bytes of data for a led. It's
not a good idea to allocate so much memory for each supported led.
Change the code to allocate blinking data only for required leds.
The standard property
linux,default-trigger = "pattern";
used to get an effect. No blinking parameters can be set yet.
Signed-off-by: Michael Polyntsov <michael.polyntsov@iopsys.eu>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
If hardware (or driver) doesn't support leds blinking, it's
now possible to use software implementation of blinking instead.
This relies on cyclic functions.
Signed-off-by: Michael Polyntsov <michael.polyntsov@iopsys.eu>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Changes:
* enable LEDST_BLINK state unconditionally
* function led_set_period() becomes available when CONFIG_LED_BLINK
is disabled. This makes led code simpler.
* fix cmd/led.c to work properly when LEDST_BLINK present, but
CONFIG_LED_BLINK is disabled
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
* Qualcomm platforms >~2016 gain support for the RPMh (Resource Power Manager)
peripheral which is used to control most regulators. The RB5 is now able to
power up its USB VBUS regulator via the rpmh regulator driver. Git history
from the original Linux driver is preserved for ease of maintenance.
* IPQ40xx SoCs gain ethernet networking support via the new ESS EDMA driver.
This adds the driver for the ESS EDMA ethernet adapter
found inside of Qualcomm IPQ40xx SoC series.
This driver also integrates the built in modified QCA8337N
switch support as they are tightly integrated.
Co-Developed-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
IPQ4019 has more networking related resets that will be required for future
wired networking support, so lets add them.
This syncs the driver with Linux.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Port over the regulator ops to U-Boot's regulator API. Add back the
pmic5 mode map using U-Boot dm_regulator_mode API and adjust the
pmic5_pldo and pmic5_pldo_lv definitions. No functional changes.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Initially just include the few regulators needed for the RB5 board.
Others can be added back as-needed.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
A lot of the features in here are only relevant when running
multi-threaded with interrupts. Drop everything except what we need to
run single-threaded with a single TCS (which is all the rpmh-rsc
framework in U-Boot supports).
Keep rpmh_write_async() for simplicity and make it wrap the regular
rpmh_write().
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Minor adjustments to fix building with U-Boot and work correctly as a
synchronous driver without interrupts. RPMh is fast enough that we can
get away with just firing off requests and assuming they complete.
U-Boot behaviour changes are annotated with a "U-Boot:" comment.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Rework the rpmh-rsc initialization to use U-Boot's driver model and
initialize cmd-db.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Since U-Boot is single threaded, we can avoid most of the complexity
that comes with handling more than one in-flight TCS. Drop all the rpmh
code associated with multi-threading as we'll instead wait for a
response on each TCS.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Keep the header pointer in the .data section so we don't initialize it
again after relocation, adjust cmd_db_get_header() to work with the
U-Boot API, and skip validating the header since all cmd-db users are
children of the rpmh-rsc and those children will only probe if cmd-db
initializes successfully.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Integrate cmd-db into the U-Boot driver model.
This is just a wrapper around an in-memory database, so we just need to
get the address and validate that cmd-db is there.
Since cmd_db_header will be stored in the .data section we can skip
bind if it's already set.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Due to our simpler rpmh-rsc driver and lack of debugfs, we don't need
quite a few cmd-db functions, just drop them.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add True Random Number Generator (TRNG) driver for Exynos chips. This
implementation is heavily based on Linux kernel's counterpart [1]. It
also follows upstream dt-bindings [2].
TRNG block is usually a part of SSS (Security Sub System) IP-core on
Exynos chips. Because SSS access on Exynos850 is protected by TZPC
(TrustZone Protection Control), it's not possible to read/write TRNG
registers from U-Boot, as it's running in EL1 mode. Instead, the
corresponding SMC calls should be used to make the secure software
running in EL3 mode access it for us. Those SMC calls are handled by
LDFW (Loadable Firmware), which has to be loaded first. For example, for
E850-96 board it's done in its board_init(), so by the time RNG
capabilities are needed the LDFW should be already loaded and TRNG
should be functional.
[1] drivers/char/hw_random/exynos-trng.c
[2] dts/upstream/Bindings/rng/samsung,exynos5250-trng.yaml
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Add ACLK (operating clock) and PCLK (bus clock) for Security Sub System
(SSS) in Exynos850. Those clocks are needed for RNG enablement.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/21728
- Conversions to DM_I2C and DM_SERIAL.
- Support for I2C3 and PWM1 for the imx6q clock driver.
- Improvements for udoo-neo
- Describe the i.MX93 CPU clocks in the devicetree to fix CPU clock printing
- Fix for SPI and NANC clk-imx8mn clock driver
Enabling CONFIG_CMD_PWM, and consequently CONFIG_DM_PWM, causes the pwm
command to fail due to a missing clock.
=> pwm enable 0 0
Enable clock-controller@20c4000 failed
Failed to enable per_clk
pwm: '0' not found
Command 'pwm' failed: Error -2
Note that it is trivial to also add the clocks for PWM2, PWM3, and PWM4.
However, I only tested PWM1 and thus only added the clock for that
signal.
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com>
Commit 727fa4539c ("clk: Add support for I2C clocks on NXP's imx6q SoC
which use CCF") added I2C clocks for I2C1 and I2C2, but not I2C3.
Consequently, devices using I2C3 fail after enabling CONFIG_CLK_IMX6Q
and thus CONFIG_CLK. Therefore, this commit adds the last I2C clock.
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com>
The osc_24m is the clock-output-name and not the one that
is used as internal name reference from the strcmp. The clock
that use osc_24m, will not be able to reparent it as they should.
We need anyway register the osc_24m clock fixed factor in the clock
tree.
Fixes: 710c4ffb89 ("clk: imx: clk-imx8mn add gpmi nand clocks")
Fixes: 85b1c11989 ("clk: imx: Add ECSPI to iMX8MN")
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
