The RDB doesn't support NAND boot at all, remove the config for it.
Apparently, it was introduced by commit dd84058d24 ("kconfig: add
board Kconfig and defconfig files") which ran some scripts. Maybe that
script was wrong or the source boards.cfg was wrong. In any case, there
is no NAND flash on the RDB.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Nowadays, u-boot can build the pbl image itself. Refer to that image in
the documentation. Also fix some typos.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The RCW was just supporting SPI boot. Add a second one for the SDcard
boot. While at it, use the same naming scheme as for the other NXP
boards.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Switch to the upstream device tree, which already includes the UART
nodes we need for the DM.
We also need to increase malloc area before relocation otherwise you'll
get the following error and the board panics:
DRAM: Initializing....using SPD
alloc space exhausted ptr 414 limit 400
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Remove any empty function which is just called by the board code. There
is no need to define this function at all.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
board_eth_init() is dead code since commit e524f3a449 ("net: Remove
eth_legacy.c"). Remove it.
I'm not sure, all the shenanigans are covered by the new DM-version. The
MDIO mux and iomux controls probably are. The fman configuration
probably isn't. OTOH, nobody cared for years and the called
fm_info_set_phy_address() was also removed years ago.
This also removes fdt_fixup_board_enet() for the ls1043a and ls1046a
because it relies on the local variable "mdio_mux" being initialized by
the board_eth_init().
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Commit cc2bf624eb ("net: fm: Remove non-DM_ETH code") removed the call
to board_ft_fman_fixup_port(). Thus remove the dead code in the board
files.
I'm not sure, all that DT shenanigans are covered by the new DM-version
of the fman code, but it seems no one complained for the past 4 years.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Since commit 7917c2e356 ("spi: fsl_espi: fix din offset") MTD is
basically broken because any read transaction will get wrong data. While
the commit in question will fix simple transfers (where both
SPI_XFER_BEGIN and SPI_XFER_END is set), it will break the most common
case, where opcode and address is send first and then data comes as a
second transfer.
This basically reverts commit 7917c2e356 ("spi: fsl_espi: fix din
offset") and make the fix particular for this simple case. Instead of
providing two buffers for reading and writing, just malloc one which is
used for both. This will work because the data is first written on the
SPI bus and then it will be read (and overwite the written data) into
the same buffer.
Suggested-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Fixes: 7917c2e356 ("spi: fsl_espi: fix din offset")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
For non-secure boot environments pamu_init() isn't called but the CAAM
will still call sec_config_pamu_table() -> config_pamu() which then uses
an uninitialized ppaact variable. In fact, that variable is initialized
with 0, so the config_pamu() will happily assume the structure is there
and will operate on that memory. Call pamu_init() in the non-secure boot
case, too.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Commit 6c171f7a18 ("common: board: make initcalls static") broke the
call to cpu_init_r. That is because PPC is already defined to 1, see:
powerpc-linux-gnu-gcc -dM -E - < /dev/null
This will conflict with the CONFIG_IS_ENABLED(PPC). Change it to
IS_ENABLED(CONFIG_PPC).
Fixes: 6c171f7a18 ("common: board: make initcalls static")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
CV1800B SDHCI controller does support 1.8V, however, boards like
MilkV-Duo 256M do not have a VCCIO 1.8V regulator (the bus is wired for
3.3V only).
These boards set 'no-1-8-v' in their device tree, and mmc_of_parse()
does respect this property. Later, when sdhci_setup_cfg() is called, it
reads SDHCI_CAPABILITIES_1 from the hardware and unconditionally adds
the UHS caps again based on what the controller advertises. Since the
board cannot switch to 1.8V, the host issues CMD11 (voltage switch
request), the card transitions, but the bus stays at 3.3V. The SD card
stops responding until the next power cycle.
Before calling sdhci_setup_cfg(), set the SDHCI_QUIRK_NO_1_8_V quirk
when 'no-1-8-v' is present. The quirk causes the SDR104/SDR50/DDR50 bits
to be masked out of the caps, allowing the card to initialize properly.
This matches the pattern used by zynq_sdhci.
Fixes: eb36f28ff7 ("mmc: cv1800b: Add sdhci driver support for cv1800b SoC")
Signed-off-by: Hiago De Franco <hfranco@baylibre.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The status polling timeout in sdhci_send_command() should measure the
time spent waiting for the command interrupt after the command has been
issued.
Do not initialize the timer at function entry, since the command inhibit
wait and setup path can consume time before SDHCI_COMMAND is written.
Start the timer immediately after issuing the command instead.
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This driver depends on DM_I2C and DM_SPI, add it.
Fixes: 3b639f6438 ("gpio: mcp230xx: Add support for models with SPI interface.")
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
This patch removes the static MDIO pinmux configuration from
rmii1_pin_mux[] and instead configures the MDIO pins conditionally
during board_init(). Previously, the MDIO_CLK and MDIO_DATA pins
were always configured for CPSW in mux.c, which could lead to
unnecessary pin ownership and conflicts in scenarios where CPSW
is not used.
With this change, the MDIO pins are configured only when required,
ensuring that CPSW Ethernet functionality in U-Boot remains unaffected.
This approach keeps Ethernet boot behavior intact and provides cleaner
separation between CPSW and other Ethernet use cases.
Reviewed-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Signed-off-by: Parvathi Pudi <parvathi@couthit.com>
Currently the oscillator stop flag (OSF) bit is never checked or cleared
on the DS1339 RTC chip.
On getting the time from the RTC, check if the OSF bit is set, log a
warning, and clear the flag. This matches the behavior of the DS1337
chip.
Note that the `date` command always reads from the RTC even when
setting or resetting the date, so the OSF flag is cleared in those cases
as well.
Signed-off-by: Ronan Dalton <ronan.dalton@alliedtelesis.co.nz>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass <sjg@chromium.org> says:
Several boards use 'test -n ${var}' (unquoted) in env scripts to detect
an empty variable and trigger a fallback or skip a hook. That works only
because of a U-Boot 'test' quirk where calls with argc < 3 returned
false; an empty variable made the expression 'test -n' (one operand) and
hit that path.
Commit 8b0619579b ("cmd: test: fix handling of single-argument form of
test") aligned 'test' with POSIX so those expressions flipped to true.
f7e7c55e53 ("cmd: test: add bug-compatibility special case for 'test
-n'") restored the old behaviour for the exact 'test -n' (one arg) case,
so the boards are not broken at runtime today, but the reliance on a
bug-compat path isn't great.
This series updates various boards to quote each affected variable so
the emptiness check is explicit and does not depend on the
special-case path.
Each commit carries a Fixes: tag pointing at 8b0619579b
Link: https://lore.kernel.org/r/20260503204936.3151124-1-sjg@chromium.org
The rescueboot script optionally runs a per-board rescue_reason hook
with:
if test -n ${rescue_reason}; then run rescue_reason; fi;
The default state is "no rescue reason script", i.e. rescue_reason
unset. The expression then expands to 'test -n' with no operand and
relies on a U-Boot 'test' quirk that treats a missing operand as
false to skip the run.
Quote the variable so an unset rescue_reason expands to 'test -n ""'
and the emptiness check is explicit.
Fixes: 8b0619579b ("cmd: test: fix handling of single-argument form of test")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
The mccmon6 bootcmd starts with:
if test -n ${recovery_status}; then run boot_recovery; ...
The default state is "no recovery requested", i.e. recovery_status
unset. The expression then expands to 'test -n' with no operand and
relies on a U-Boot 'test' quirk that treats a missing operand as
false to skip recovery.
Quote the variable so an unset recovery_status expands to 'test -n ""'
and the emptiness check is explicit.
Fixes: 8b0619579b ("cmd: test: fix handling of single-argument form of test")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Łukasz Majewski <lukma@nabladev.com>
On beaglev_fire, design_overlays gates an overlay-application loop
on:
if test -n ${no_of_overlays}; then ...
The default state is "no overlays", i.e. no_of_overlays unset. The
expression then expands to 'test -n' with no operand and relies on a
U-Boot 'test' quirk that treats a missing operand as false to skip
the loop.
Quote the variable so an unset no_of_overlays expands to 'test -n ""'
and the emptiness check is explicit.
Fixes: 8b0619579b ("cmd: test: fix handling of single-argument form of test")
Signed-off-by: Simon Glass <sjg@chromium.org>
The Siemens am33x-common, env-common and draco-etamin headers gate
boot-partition selection logic on:
if test -n ${A}; then ...
if test -n ${B}; then ...
A and B are flags that the upgrade machinery sets to mark "the other
partition just became active". The default state is unset, in which
case the expression expands to 'test -n' with no operand and relies
on a U-Boot 'test' quirk that treats a missing operand as false to
skip the branch.
Quote each variable so an unset A or B expands to 'test -n ""' and
the emptiness check is explicit.
Fixes: 8b0619579b ("cmd: test: fix handling of single-argument form of test")
Signed-off-by: Simon Glass <sjg@chromium.org>
bootcmd_ti_mmc skips a per-board init hook with:
if test -n ${board_init}; then run board_init; fi;
The default case is "no board override", i.e. board_init unset. The
expression then expands to 'test -n' with no operand and relies on a
U-Boot 'test' quirk that treats a missing operand as false to skip the
run.
Quote the variable so an unset board_init expands to 'test -n ""' and
the emptiness check is explicit.
Fixes: 8b0619579b ("cmd: test: fix handling of single-argument form of test")
Signed-off-by: Simon Glass <sjg@chromium.org>
The combined boot firmware firmware-aquila-am69-gp.bin depends on
tiboot3-am69-gp-aquila.bin, which in turn requires the GP variant
of the TI system firmware blob (ti-fs-firmware-j784s4-gp.bin).
Fix the combined boot firmware image build by adding the missing binman
nodes.
Fixes: f62d4535cf ("arm: dts: k3-am69-aquila: add combined boot firmware image")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
The last users of this legacy i2c stack have been removed or converted
to a modern part of the stack instead. Remove this code and references
to it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Set the ops structure as static. The structure is not accessible
from outside of this driver.
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Rasmus Villemoes <ravi@prevas.dk> says:
There are quite a few places where we allocate X+1 bytes, initialize
the first X bytes via memcpy() and then set the last byte to 0.
The kernel has a helper for that, kmemdup_nul(). Introduce a similar
one, and start making use of it in a few places. Also the existing
memdup() helper can be put to more use.
There are lots more places one could modify. But for code shared with
host tools, one would need to do some refactoring, putting memdup()
and memdup_nul() in their own str-util.c TU which could then also be
included in the tools build.
Link: https://lore.kernel.org/r/20260421075439.16696-1-ravi@prevas.dk
Use memdup() instead of open-coding it.
In the dm_setup_inst() case, there was never any reason to use
calloc(), as the whole allocation is definitely initialized via the
immediately following memcpy().
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
We have memdup_nul() for exactly this pattern of duplicating a block
of memory and ensuring there's a nul byte after the copy.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
With the addition of memdup_nul(), strdup() and strndup() can be
implemented as one-liners.
While not required by POSIX or C, do keep the behaviour of gracefully
accepting a NULL source and simply return NULL.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
