Upstream DTS added explicit ranges to the fss node. It did not include the
32 bit memory space needed by the R5 to access OSPI. With the upstream DTS
sync, OSPI boot no longer works.
Adding the missing range here. It is also being added in the upstream DTS,
so after the next upstream DTS sync, this patch can be removed. See
f00e626085 (arm64: dts: ti: k3-j7200: Use exact ranges for FSS node)
Fixes: 5024a96db8 ("Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstream")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Upstream DTS added explicit ranges to the fss node. It did not include the
32 bit memory space needed by the R5 to access OSPI. With the upstream DTS
sync, OSPI boot no longer works.
Adding the missing range here. It is also being added in the upstream DTS,
so after the next upstream DTS sync, this patch can be removed. See
f062a015f4 (arm64: dts: ti: k3-j784s4: Use exact ranges for FSS node)
Fixes: 5024a96db8 ("Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstream")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Upstream DTS added explicit ranges to the fss node. It did not include the
32 bit memory space needed by the R5 to access OSPI. With the upstream DTS
sync, OSPI boot no longer works.
Adding the missing range here. It is also being added in the upstream DTS,
so after the next upstream DTS sync, this patch can be removed. See
f062a015f4 (arm64: dts: ti: k3-j784s4: Use exact ranges for FSS node)
Fixes: 5024a96db8 ("Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstream")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Conversion to DM_I2C is mandatory, enable DM_I2C
to disable board removal warning. Convert EEPROM
and IT6251 access to use DM_I2C API.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Conversion to DM_I2C is mandatory, rework to remove
use of legacy I2C API.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Simon Glass <sjg@chromium.org> says:
This data structure provides a list of pointers / array of structures.
I was planning to use it for the lmb restructure, to allow it to
support any number of entries, but then I gave up on it.
There are quite a few places in U-Boot where such a list would be
useful, since it supports growing the array.
[...]
Example:
struct my_struct obj;
struct my_struct *ptr = alist_add(&lst, &obj, struct my_struct);
// now ptr is in the list
[trini: Reword the cover letter slightly, do not merge the RFC portion]
In various places it is useful to have an array of structures, but allow
it to grow. In some cases we work around it by setting maximum number of
entries, using a Kconfig option. In other places we use a linked list,
which does not provide for random access and can complicate the code.
Introduce a new data structure, which is a variable-sized list of structs
each of the same, pre-set size. It provides O(1) access and is reasonably
efficient at expanding linearly, since it doubles in size when it runs out
of space.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current implementation can return an extra result at the end when
the string ends with a space. Fix this by adding a special case.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present in tests it is possible to cause an out-of-memory condition
with malloc() but not realloc(). Add support to realloc() too, so code
which uses that function can be tested.
Signed-off-by: Simon Glass <sjg@chromium.org>
This converts the sniper board (LG P970) to device-tree control
and DM I2C, both for SPL and U-Boot.
Note that we lose the call to board_mmc_power_init to enable power
for MMC2. This is now expected to take place through proper
regulators, which are not yet available with the twl4030 driver.
The call to twl4030_power_mmc_init is moved to spl_board_init for now.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
The am33xx_spl_board_init function was introduced as a way to add
board-specific SPL init for AM33xx devices since the spl_board_init
function was already used for SoC-specific init.
Now that the SoC-specific SPL init was moved to spl_soc_init, we can
use spl_board_init for this purpose and get rid of
am33xx_spl_board_init.
Rename the function in board files and enable the related config
option for concerned boards.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Both spl_board_init and spl_soc_init are available as ways to run
specific code in the SPL's board_init_r. Use the former for init
code that is specific to the SoC and leave spl_board_init available
for boards to use.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Paul Kocialkowski <paulk@sys-base.io> says:
Here is a bunch of configuration cleanups for OMAP boards, mostly
unifying and moving common configuration from board-specific defconfigs
to Kconfig definitions.
There's also a cleanup of the sniper (LG Optimus Black) defconfig,
prior to migrating it to DM/DT in a future follow-up series.
Remove custom config options that are not particularly necessary.
Align them with OMAP3 defaults used on other boards (especially for
memory locations).
Also enable Thumb build to reduce the SPL size and remove the custom
prompt text.
This makes the config a lot more minimalistic, maintainable and easier
to read.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The common EMIF init code used for DRA7xx does not explicitly fill
the gd->bd->bi_dram entries (like OMAP3 does), so there is no reason
to set an explicit number of DRAM banks which doesn't correspond to
anything in particular.
Remove the CONFIG_NR_DRAM_BANKS option from the concerned defconfigs.
The dram_init_banksize default implementation will be fine with the
default value for the config option.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The number of DRAM banks was defined to the same value in each OMAP3
board defconfig, which is expected and hardcoded in the code. Move the
common definition to the Kconfig option declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The maximum SPL size was defined to the same value in each OMAP3
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The maximum U-Boot size was defined to the same value in each OMAP3
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The init stack pointer was defined to the same value in each DRA7xx
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The DRA7xx EVM board use a slightly different init stack pointer
address compared to the AM57xx EVM board, for no particular reason.
Align the address with the AM57xx EVM board (which matches the usual
offset to the end of SRAM used by other OMAP devices) prior to removing
it as a per-board option in a later commit.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The init stack pointer was defined to the same value in each AM43xx
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The init stack pointer was defined to the same value in each AM33xx
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The AM33xx chiliboard and guardian boards use a slightly different
init stack pointer address compared to other AM33xx boards, for no
particular reason.
Align the address with other AM33xx boards prior to removing it as a
per-board option in a later commit.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The init stack pointer was defined to the same value in each OMAP3
board defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
The SPL text base was defined to the same value in each OMAP3 board
defconfig. Move the common definition to the Kconfig option
declaration instead.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>
Simon Glass <sjg@chromium.org> says:
This series includes fixes to get some rockchip and nvidia boards
working again. It also drops the broken Beaglebone Black config and
provides a devicetree fix for coral (x86).
The code here is confusing due to large blocks which are #ifdefed out.
Add a function phase_sdram_init() which returns whether SDRAM init
should happen in the current phase, using that as needed to control the
code flow.
This increases code size by about 500 bytes in SPL when the cache is on,
since it must call the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present gd->ram_size is 0 in SPL, meaning that it is not possible to
enable the cache. Correct this by always populating the RAM size
correctly.
This increases code size by about 500 bytes in SPL, since it must call
the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
On some boards, the bloblist is created in SPL once SDRAM is ready. It
cannot be accessed until that point, so is not available early in SPL.
Add a condition to avoid a hang in this case.
This fixes a hang in chromebook_coral
Fixes: 70fe238594 ("fdt: Allow the devicetree to come from a bloblist")
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Raymond Mao <raymond.mao@linaro.org>
There is no need to remove input files. It makes it harder to diagnose
failures. Keep the payload file.
There is no test for this condition, but one could be added.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The tool must return an error code when invalid arguments are provided,
otherwise binman has no way of knowing that anything went wrong.
Correct this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: fab430be2f ("tools: add mkeficapsule command for UEFI...")
Tools cannot be assumed to be present. Add a check for this with the
mkeficpasule tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: b617611b27 ("binman: capsule: Add support for generating...")
Tools should have an option to obtain the version, so add this to the
mkeficapsule tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This change adds support for PCIe connected nvme disk - phyBOARD-Polis
base board.
One needs to call following commands in u-boot:
> pci enum
> nvme scan
> nvme info
And then ones to access proper file system (like fat[ls|load|write],
ext4[ls|load|write]).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Enable the 'cpu' command to display the CPU info and release CPU core to
run baremetal or RTOS applications.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Enable the 'cpu' command and the depended imx CPU driver to
display the CPU info and release CPU core to run baremetal
or RTOS applications.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
