Add '\n' to the end of the warning message.
Besides, if we enable console record utility,
missing the '\n' causes the console_record_readline
fail to recognize the end of string.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable standard boot for the phyCORE-i.MX93 board and use it as a new
default. Add required standard boot variables to the environment, while
removing old boot scripts and now unnecessary environment variables.
Adjust variables according to the requirements of PHYTEC ampliphy-boot
distro-boot. Last but not least, order environment vars by alphabet and
run 'make savedefconfig' to resync defconfig.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
For silicon revision A1, the USB instance number for USB1 is 3 and for
USB2 it is 4. This changed for revision B0 where the USB instance number
for USB1 is 0 and for USB2 it is 1, which is the intended instance
number. Select the correct numbering according to the selected SoC
(IMX95) and its revision.
This patch is based on the information provided by:
"AN14750 Migration Guide from i.MX 95 A1 to B0; Rev. 1.0" .
Reviewed-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Fedor Ross <fedor.ross@ifm.com>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Similar to the imx95, use the nxp-imx9image etype for the binman node to
facilitate further modifications.
Signed-off-by: Jérémie Dautheribes (Schneider Electric) <jeremie.dautheribes@bootlin.com>
No functional changes, only cosmetic adjustments to prepare for the next
commit.
Signed-off-by: Jérémie Dautheribes (Schneider Electric) <jeremie.dautheribes@bootlin.com>
Andrew Goodbody <andrew.goodbody@linaro.org> says:
Smatch reported an error where a value calculated by ERR_PTR was not
used. Fixing this to return the generated value led to a test failure
which meant updating the sandbox clock code so that it would still cause
the tests to pass with the above correction.
Debugging this problem led to a SIGSEGV which is addressed in 1/3.
Possible memory leaks noticed are addressed in 3/3.
Link: https://lore.kernel.org/r/20251121-clk_uclass_fix-v2-0-74f4ea10e194@linaro.org
In clk_set_default_get_by_id ret is passed to ERR_PTR but nothing is
done with the value that this calculates which is obviously not the
intention of the code. This is confirmed by the code around where this
function is called.
Instead return the value from ERR_PTR.
Then fixup the sandbox code so that the test dm_test_clk does not fail
as it relied on the broken behaviour.
Finally disable part of the test that does not work correctly with
CLK_AUTO_ID
This issue found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
To the exception of red_led_on in the arm-specific assembly code, all
code interacting with the red status LED was guarded by the
CONFIG_LED_STATUS_RED symbol, which is enabled in none of the upstream
defconfigs.
Since the last board which overrode the weak red_led_on function got
migrated to the new LED mechanism, there's also no user of the
arm-specific assembly code anymore, therefore it can be removed along
the other unreachable code sections.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
red_led_on is either called from the legacy LED shell command (which is
disabled for corvus) or from arm-specific assembly code right before
jumping into board_init_r() in U-Boot proper.
Let's migrate to use the more modern LED subsystem by migrating to DM.
The default-state is set to on to mimic red_led_on() from the
arm-specific assembly code as a missing default-state FDT property
currently means the LED is not probed except if explicitly done via the
led shell command. Note though that this is running much later in the
boot process, once DM is started.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
No PPC upstream defconfig actually enables CONFIG_LED_STATUS and we're
trying to get rid of the legacy LED API, so let's remove one of its last
users.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Commit 76386d6195 ("arm: Remove cm_t35 board") removed support for the
board that was built when TARGET_CM_T35 is selected, but removal of the
symbol was forgotten, so let's fix this oversight.
While at it, update the README for omap3 to remove the last mention of
cm_t35.
Fixes: 76386d6195 ("arm: Remove cm_t35 board")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
The last user of coloured_LED_init has been recently removed, so we can
remove all places it's called and defined as it does nothing now.
Nobody makes use of the yellow and blue status LEDs from the legacy API,
so let's remove all references to it.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Add DRAM settings for 1 GiB variant of DH STM32MP13xx DHCOR SoM
and support for SoM DRAM coding HW straps decoding and automatic
DRAM configuration selection. Enable CONFIG_BOARD_EARLY_INIT_F on
all STM32MP1 DHSOM, as it is required for the HW straps decoding.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Update DRAM chip type and density comment for 512 MiB DRAM settings for
DH STM32MP13xx DHCOR DHSBC to match the chip on the SoM. No functional
change.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
STM32MP13xx may have OPTEE-OS at 0xdd000000 even on systems with 1 GiB
of DRAM at 0xc0000000, which is not the end of DRAM anymore. This puts
the OPTEE-OS in the middle of DRAM. Currently, the code sets RAM top to
0xdd000000 and prevents the DRAM range past OPTEE at 0xe0000000..0xffffffff
from being set as cacheable and from being usable. The code also sets the
area over OPTEE as invalid region in MMU tables, which is not correct.
Adjust the code such, that it only ever sets RAM top just before OPTEE
in case the OPTEE is really at the end of DRAM, mainly to be backward
compatible. Furthermore, adjust the MMU table configuration such, that
the regions over the OPTEE are simply skipped and not reconfigured, and
the regions between end of OPTEE and RAM top are set as cacheable, if
any actually exist.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Quentin Schulz <foss+uboot@0leil.net> says:
u-boot,boot-led and u-boot,error-led aren't actually handled by some
generic code but rather by board or architecture specific code. They
also aren't properties that are part of the official dt-binding so they
cannot be upstreamed. For u-boot,boot-led, there's actually a proper
replacement which is /options/u-boot/boot-led[1] (+ CONFIG_LED_BOOT=y).
For Rockchip boards, either nothing (for RK3066, PX30 and RK3399) was
using that property or (for RK3188) the code handling it was guarded by
symbols that were not enabled in the defconfig. For those, the property
and guarded code are removed.
For the Sam9x60 Curiosity, it seems that even though the LED is
controlled whenever CONFIG_LED is enabled, it isn't enabled by default
in the defconfig (but the code was added without modifying the
defconfig, explicitly leaving a choice to the user). I decided to keep
that feature by simply migrating it to the new API, though I cannot test
it as I do not own the device.
The STM32 boards will be migrated in the near future once their upstream
(kernel) Device Trees gain the new way to specify this (via
/options/u-boot/boot-led). I'll let Patrice handle this, see
https://lore.kernel.org/u-boot/94ed1988-13e8-4fe3-bdff-ba2c9973c556@foss.st.com/
and
https://lore.kernel.org/u-boot/2a3aa43a-ce19-41e1-ab56-556629ce5cf9@foss.st.com/
After this, only one user of u-boot,boot-led will be left, based on
STM32: board/dhelectronics/dh_stm32mp1/board.c. @Patrice, maybe that's
something you want to have a look at as well, this seems to be some
evaluation kit?
The only users of u-boot,error-led are STM32 boards, so I'll leave this
to Patrice as well, I do not know what's the way to go for that one.
In any case, I would like to not encourage people to use out-of-spec DT
properties when there is another option (u-boot,boot-led), so I remove
the properties from the dt-binding document from U-Boot.
The help text for the blink subcommand of the led command was misleading
so this is now fixed.
This also moves the content of doc/README.LED into the doc/api/led.rst,
while clearly stating one shouldn't be using this anymore.
This also gets rid of dt-binding that we already have in dts/upstream.
Finally, this adds documentation for the led shell command.
[1] https://github.com/devicetree-org/dt-schema/blob/v2025.08/dtschema/schemas/options/u-boot.yaml#L113-L116
Link: https://lore.kernel.org/r/20251112-led-old-dt-v1-0-2892d49517db@cherry.de
This board is one of the last users of /config/u-boot,boot-led property
which is a U-Boot property out of the DT spec.
Let's migrate it to use the in-spec /options/u-boot/boot-led property.
When enabling LED_BOOT, U-Boot proper will lit the LED right before
entering the main loop, so nothing needs to be done in board files.
As explained in the commit adding support for this u-boot,boot-led
property, let's keep backward compatibility in case LED_BOOT isn't
selected.
Note that this is not tested as I do not own this device.
Cc: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Alexander Dahl <ada@thorsis.com>
There's no code to make use of it.
Further more, the HW default state of that LED is on and migrating this
to the LED_BOOT implem brings no benefit as it'll stay on if U-Boot
reaches its main-loop. Blinking the LED_BOOT also doesn't help because
it doesn't blink for long enough to be noticeable before it's kept on.
This is by design, c.f.
https://source.denx.de/u-boot/u-boot/-/blob/v2025.10/include/led.h#L32-34
If we want this LED to be doing something different, it'll need to be
handled by a board file anyway.
Considering it hasn't worked in many years (if ever), let's just remove
it.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
There's no code to make use of it.
Further more, the HW default state of that LED is on and migrating this
to the LED_BOOT implem brings no benefit as it'll stay on if U-Boot
reaches its main-loop. Blinking the LED_BOOT also doesn't help because
it doesn't blink for long enough to be noticeable before it's kept on.
This is by design, c.f.
https://source.denx.de/u-boot/u-boot/-/blob/v2025.10/include/led.h#L32-34
If we want this LED to be doing something different, it'll need to be
handled by a board file anyway.
Considering it hasn't worked in many years, let's just remove it.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
There's not a single device making use of that code and it anyway
shouldn't be using the old deprecated u-boot,boot-led /config property
anymore but rather boot-led from /options/u-boot[1] Device Tree node.
Because spl_board_init() is only present to call this now removed
function, we can remove it as well as SPL_BOARD_INIT which is the symbol
guarding calls to spl_board_init() (which is now also removed).
[1] https://github.com/devicetree-org/dt-schema/blob/v2025.08/dtschema/schemas/options/u-boot.yaml#L113-L116
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
This property is only read in arch/arm/mach-rockchip/rk3188/rk3188.c
when CONFIG_SPL_LED is enabled, which isn't the case for this board, so
let's remove dead code.
Additionally, if we ever want to enable this LED as Boot LED, we should
instead be using boot-led phandle property in /options/u-boot[1] Device
Tree node with the "new" LED UCLASS devices.
[1] https://github.com/devicetree-org/dt-schema/blob/v2025.08/dtschema/schemas/options/u-boot.yaml#L113-L116
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Standardboot allows setting bootdevices and bootmeths in devicetree.
This is already implemented for imx8mp-libra board.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
This adds support for the Kontron Electronics OSM-S i.MX93 SoM
and the matching baseboard BL i.MX93.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
The arch-level implementation should be used here so that
env_get_location() can be used on board-level.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
This adds support for the Kontron Electronics OSM-S i.MX8MP SoM
and the matching baseboard BL i.MX8MP.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Make sure the correct PLATFORM_...FLAGS are assigned in each
case, consistently. Assign PLATFORM_ELFFLAGS for both LE and
BE case. The previous PLATFORM_CPPFLAGS makes no sense for
these particular parameters, which are passed to objcopy.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Make sure the end of U-Boot is at 8-byte aligned offset, not 4-byte
aligned offset. This allows safely appending DT at the end of U-Boot
with the guarantee that the DT will be at 8-byte aligned offset. This
8-byte alignment is now checked by newer libfdt 1.7.2 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Trivially fix the following warnings in sandbox DTs, which show up with
DTC 1.7.2. Assign pin groups less confusing node names with pins- prefix
to avoid confusing DT compiler into thinking the node is really a bus node:
"
arch/sandbox/dts/.test.dtb.pre.tmp:1831.20-1841.5: Warning (i2c_bus_bridge): /pinctrl/i2c: incorrect #address-cells for I2C bus
arch/sandbox/dts/.test.dtb.pre.tmp:1831.20-1841.5: Warning (i2c_bus_bridge): /pinctrl/i2c: incorrect #size-cells for I2C bus
arch/sandbox/dts/test.dtb: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge'
arch/sandbox/dts/.test.dtb.pre.tmp:1848.20-1856.5: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/sandbox/dts/.test.dtb.pre.tmp:1848.20-1856.5: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus
arch/sandbox/dts/test.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
"
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Trivially fix the following warnings in sandbox DTs, which show up with
DTC 1.7.2. Fill in the missing address and adjust emulated I2C address
to fit the 7bit address limit:
"
arch/sandbox/dts/sandbox.dtsi:138.30-140.5: Warning (i2c_bus_reg): /i2c@0/sandbox_pmic: I2C bus unit address format error, expected "40"
arch/sandbox/dts/sandbox.dtsi:146.18-161.5: Warning (i2c_bus_reg): /i2c@0/emul: I2C bus unit address format error, expected "ff"
arch/sandbox/dts/sandbox.dtsi:148.4-17: Warning (i2c_bus_reg): /i2c@0/emul:reg: I2C address must be less than 7-bits, got "0xff". Set I2C_TEN_BIT_ADDRESS for 10 bit addresses or fix the property
"
"
arch/sandbox/dts/.test.dtb.pre.tmp:912.18-926.5: Warning (i2c_bus_reg): /i2c@0/emul: I2C bus unit address format error, expected "ff"
arch/sandbox/dts/.test.dtb.pre.tmp:913.4-17: Warning (i2c_bus_reg): /i2c@0/emul:reg: I2C address must be less than 7-bits, got "0xff". Set I2C_TEN_BIT_ADDRESS for 10 bit addresses or fix the property
arch/sandbox/dts/.test.dtb.pre.tmp:928.30-931.5: Warning (i2c_bus_reg): /i2c@0/sandbox_pmic: I2C bus unit address format error, expected "40"
"
Fix up pmic test to match.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Make sure the end of U-Boot is at 8-byte aligned offset, not 4-byte
aligned offset. This allows safely appending DT at the end of U-Boot
with the guarantee that the DT will be at 8-byte aligned offset. This
8-byte alignment is now checked by newer libfdt 1.7.2 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The SCMI shared memory area is no longer automatically marked as
non-cacheable after the commit a5a0134570 ("firmware: scmi: Drop
mmu_set_region_dcache_behaviour() misuse").
This change in behavior cause Rockchip RK3588 boards to fail boot with:
SoC: RK3588
DRAM: 8 GiB
scmi-over-smccc scmi: Channel unexpectedly busy
scmi_base_drv scmi-base.0: getting protocol version failed
scmi-over-smccc scmi: failed to probe base protocol
initcall_run_r(): initcall initr_dm() failed
### ERROR ### Please RESET the board ###
Update the memory mapping on RK3588 to mark the SCMI shared memory area
as non-cacheable to fix the SCMI shared memory based transport issue
that prevented RK3588 boards from booting.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/28408
This pull request enhances NAND and SPI flash support, primarily
focusing on the Airoha EN7523 platform. The Airoha SPI driver receives
a major update, adding DMA, dual/quad-wire modes, and a critical
workaround to prevent flash damage if the UART_TXD pin shorts to Ground.
New chips supported include FudanMicro FM25S01A SPI-NAND and several
Winbond SPI NOR devices. Fixes include correcting Kconfig dependencies,
updating the mtd benchmark command to use lldiv(), and addressing minor
bugs in the generic spi-mem and SPL NAND code.
The ROM code of Xilinx Zynq searches the boot flash for a "BootROM header"
at increments of 32k (0x8000), beginning with 0x0000 for a
configuration without authentication and beginning with 0x8000
for a configuration with authentication. [1]
Move the offset of the SPL partition on the brcp1 board to 0x8000
so that both cases are the same, e.g. a board that is configured
without authentication can boot an SPL partition with or without
authentication.
[1] Zynq 7000 TRM, section 6.3 "BootROM Code"
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20251029092252.115582-1-wolfgang.wallner@br-automation.com
Dmitrii Sharshakov <d3dx12.xx@gmail.com> says:
Initially fix the inconsistency reported in reply to the previous
series and also make sure AArch64 images can be built with latest
Clang versions by guarding AArch32-specific options behind extra
config checks.
Tested qemu_arm_defconfig and qemu_arm64_defconfig with Clang 21,
mainline (to be 22) ce7f9f9c and also Clang 18 (for AArch64 only, as I
have not managed to build an AArch32 image with clang-18).
Link: https://lore.kernel.org/r/20251108-clang-cross-fixes-v1-0-ea6c4282844a@gmail.com
Clang is strict with respect to unknown options.
Therefore, only enable AArch32-specific options when CONFIG_ARM64
is not set.
Signed-off-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
Philippe Schenker <philippe.schenker@impulsing.ch> says:
This series fixes compilation errors when building for R5 cores and
addresses a security issue where authenticated images were not being
used correctly.
Patch 1: Cosmetic removal of duplicate code
Patches 2-3: Fix build errors caused by type mismatches between
function signatures and the types used in R5 builds.
Patches 4-5: fix a bug where ti_secure_image_post_process() relocates
images during authentication, but callers were still using the original
unverified addresses.
Patch 6: Implements is_running operation to allow querying R5F core status.
Link: https://lore.kernel.org/r/20251111071756.1257488-1-dev@pschenker.ch
