Clang is strict with respect to unknown options.
Therefore, only enable AArch32-specific options when CONFIG_ARM64
is not set.
Signed-off-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
Clang cross-compilation worked when cross binutils were available
in PATH. However, when binutils are not in the PATH clang failed to
discover the assembler, falling back to host one.
Make --prefix always absolute, Clang supports this and will search for
e.g. $(prefix)-as for assembler. This makes sure user does not have to
add cross binutils to PATH for Clang build.
Fixes build for these examples (with qemu_arm(64)_defconfig):
make CC=clang-21 CROSS_COMPILE=/.../bin/arm-none-eabi-
make CC=clang-20 CROSS_COMPILE=/.../bin/aarch64-linux-gnu-
Also validated for the case when provided with cross toolchain on PATH:
PATH=/.../bin:$PATH make CC=clang-21 CROSS_COMPILE=arm-none-eabi- -j20
This patch does not affect GCC builds, and they have _not_ been
validated against regressions.
Reported-by: Tom Rini <trini@konsulko.com>
Closes: https://lore.kernel.org/u-boot/20251106221355.GZ6688@bill-the-cat/
Signed-off-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
We found that some serial console may pull TX line to GROUND during board
boot time. Airoha uses TX line as one of it's BOOT pins. This will lead
to booting in RESERVED boot mode.
It was found that some flashes operates incorrectly in RESERVED mode.
Micron and Skyhigh flashes are definitely affected by the issue,
Winbond flashes are NOT affected.
Details:
--------
DMA reading of odd pages on affected flashes operates incorrectly. Page
reading offset (start of the page) on hardware level is replaced by 0x10.
Thus results in incorrect data reading. Usage of UBI make things even
worse. Any attempt to access UBI leads to ubi damaging. As result OS loading
becomes impossible.
Non-DMA reading is OK.
This patch detects booting in reserved mode, turn off DMA and print big
fat warning.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
The spinand driver do 3 type of dirmap requests:
* read/write whole flash page without oob
(offs = 0, len = page_size)
* read/write whole flash page including oob
(offs = 0, len = page_size + oob_size)
* read/write oob area only
(offs = page_size, len = oob_size)
The trick is:
* read/write a single "sector"
* set a custom sector size equal to offs + len. It's a bit safer to
round up "sector size" value 64.
* set the transfer length equal to custom sector size
And it works!
Thus we can find all data directly from dirmap request, so flash specific
parameters is not needed anymore. Also
* airoha_snand_nfi_config(),
* airoha_snand_nfi_setup()
functions becomes unnecessary.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Set custom sector size equal to flash page size including oob. Thus we
will always read a single sector. The maximum custom sector size is
8187, so all possible flash sector sizes are supported.
This patch is a necessary step to avoid usage of flash specific
parameters.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This just reduce the number of modification of REG_SPI_NFI_CNFG and
REG_SPI_NFI_SECCUS_SIZE registers during dirmap operation.
This patch is a necessary step to avoid usage of flash specific
parameters.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
spi-airoha-snfi uses custom sector size in REG_SPI_NFI_SECCUS_SIZE
register, so setting of page/oob sizes in REG_SPI_NFI_PAGEFMT is not
required.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
During writing, the entire flash page (including OOB) will be updated
with the values from the temporary buffer, so we need to fill the
untouched areas of the buffer with 0xff value to prevent accidental
data overwriting.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Airoha snfi spi controller supports acceleration of DUAL/QUAD
operations, but does not supports DUAL_IO/QUAD_IO operations.
Luckily DUAL/QUAD operations do the same as DUAL_IO/QUAD_IO ones,
so we can issue corresponding DUAL/QUAD operation instead of
DUAL_IO/QUAD_IO one.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This driver can accelerate single page operations only, thus
continuous reading mode should not be used.
Continuous reading will use sizes up to the size of one erase block.
This size is much larger than the size of single flash page. Use this
difference to identify continuous reading and return an error.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This patch speed up cache reading/writing/updating opearions.
It was tested on en7523/an7581 and some other Airoha chips.
It will speed up
* page reading/writing without oob
* page reading/writing with oob
* oob reading/writing (significant for UBI scanning)
The only know issue appears in a very specific conditions for en7523 family
chips only.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Booting without this patch and disabled dirmap support results in
[ 2.980719] spi-nand spi0.0: Micron SPI NAND was found.
[ 2.986040] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 2.994709] 2 fixed-partitions partitions found on MTD device spi0.0
[ 3.001075] Creating 2 MTD partitions on "spi0.0":
[ 3.005862] 0x000000000000-0x000000020000 : "bl2"
[ 3.011272] 0x000000020000-0x000010000000 : "ubi"
...
[ 6.195594] ubi0: attaching mtd1
[ 13.338398] ubi0: scanning is finished
[ 13.342188] ubi0 error: ubi_read_volume_table: the layout volume was not found
[ 13.349784] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
[ 13.356897] UBI error: cannot attach mtd1
If dirmap is disabled or not supported in the spi driver, the dirmap requests
will be executed via exec_op() handler. Thus, if the hardware supports
dual/quad spi modes, then corresponding requests will be sent to exec_op()
handler. Current driver does not support such requests, so error is arrised.
As result the flash can't be read/write.
This patch adds support of dual and quad wires spi modes to exec_op() handler.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This operation is not needed because airoha_snand_write_data() and
airoha_snand_read_data() will properly handle data transfers above
SPI_MAX_TRANSFER_SIZE.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Coverity finds a potential integer overflow in the following code:
ncycles += ((op->data.nbytes * 8) / op->data.buswidth) / (op->data.dtr ? 2 : 1);
A quick analysis shows that the only caller of the suspicious code is the
spinand_select_op_variant() function from the drivers/mtd/nand/spi/core.c
file.
According to the code the value of op->data.nbytes is equal to
nanddev_per_page_oobsize(nand) + nanddev_page_size(nand)
Therefore it's maximum value a bit larger than 4Kb (I never seen flashes
with page size large than 4Kb). So op->data.nbytes always fits within
13 bits. As result an overflow will never happen.
Anyway it's better fix an issue to eliminate the error message.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This option is only meaningful within the davinci nand driver, so drop
the statement here (which had no effect).
Signed-off-by: Tom Rini <trini@konsulko.com>
As was noted by Heinrich Schuchardt, some SoCs may not support 64-bit
divisions. Fix an issue by using lldiv() instead.
The code assumes that the benchmark never takes more than 4294 seconds
and thus the difference will be less than U32_MAX.
Also replace (speed / 1024) by (speed >> 10) to avoid potential 64-bit
division.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
The hidden symbol SPL_SYS_NAND_SELF_INIT was not being used correctly
leading to Kconfig dependency issues seen with "make allyesconfig". As
it's a select'd symbol we don't need to have a depends line on it, and
then in turn we need to also update the logic on SYS_NAND_PAGE_SIZE and
SYS_NAND_OOBSIZE.
Signed-off-by: Tom Rini <trini@konsulko.com>
All these chips are dual and quad capable. They are also DTR capable,
but the core is not yet ready for that.
Performances of all chips are comparable at 30MHz and are as follow:
Eraseblock single read speed: 938kiB/s
Eraseblock dual read speed: 1068kiB/s
Eraseblock quad read speed: 3751kiB/s
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Rasmus Villemoes <ravi@prevas.dk> says:
Implement a "part name" subcommand, mirroring the existing "part
number" subcommand.
In the discussion for v1 of that, it came up that there's a bit of
inconsistency in how much and what one can assume to be initialized in
'struct disk_partition' after a successful call of one of the
get_info* family of functions. Patch 1/2 tries to consolidate
that by making sure all ->get_info invocations go through a common
helper that at least always initializes the string members.
Quentin, I've taken the liberty of including your Acks, as the
incremental diff in patch 1 is quite minor, but do speak up if I
should not have done that.
Link: https://lore.kernel.org/r/20251110205411.4075351-1-ravi@prevas.dk
This is a natural buddy to the existing "part number", allowing one to
get the partition name for a given partition number.
Acked-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Acked-by: Quentin Schuloz <quentin.schulz@cherry.de>
Tested-by: Anshul Dalal <anshuld@ti.com>
Not all ->get_info implementations necessarily populate all the string
members of struct disk_partition.
Currently, only part_get_info_by_type() (and thereby part_get_info)
ensure that the uuid strings are initialized; part_get_info_by_type()
and part_get_info_by_uuid() do not. In fact, the latter could lead to
a false positive match - if the ->get_info backend does not populate
info->uuid, stale contents in info could cause the strncasecmp() to
succeed.
None of the functions currently ensure that the ->name and ->type
strings are initialized.
Instead of forcing all callers of any of these functions to
pre-initialize info, or all implementations of the ->get_info method
to ensure there are valid C strings in all four fields, create a small
helper function and factor all invocations of ->get_info through that.
This also consolidates the -ENOSYS check and standardizes on using
log_debug() for reporting absence, instead of the current mix of
PRINTF and log_debug(). It does mean we have to special-case -ENOSYS
in the error cases inside the loops in the _by_uuid() and _by_name()
functions, but it's still a net win in #LOC.
Acked-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Tested-by: Anshul Dalal <anshuld@ti.com>
Philippe Schenker <philippe.schenker@impulsing.ch> says:
This series fixes compilation errors when building for R5 cores and
addresses a security issue where authenticated images were not being
used correctly.
Patch 1: Cosmetic removal of duplicate code
Patches 2-3: Fix build errors caused by type mismatches between
function signatures and the types used in R5 builds.
Patches 4-5: fix a bug where ti_secure_image_post_process() relocates
images during authentication, but callers were still using the original
unverified addresses.
Patch 6: Implements is_running operation to allow querying R5F core status.
Link: https://lore.kernel.org/r/20251111071756.1257488-1-dev@pschenker.ch
Add is_running callback to query the R5F core halt status via the
TI-SCI processor control API. This allows the remoteproc framework
to determine whether the R5F core is currently runnin.
The core is considered running when the PROC_BOOT_CTRL_FLAG_R5_CORE_HALT
bit is not set in the control flags.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Reviewed-by: Andrew Davis <afd@ti.com>
After ti_secure_image_post_process() authenticates the image, it may
relocate it to a different memory location and update image_addr to
point to the verified image.
However, rproc_elf_load_image() and rproc_elf_get_boot_addr() were
still using the original "addr" parameter, potentially operating on
the unverified or stale image location instead of the authenticated
image.
Use image_addr (cast to ulong to match function signatures) after
authentication to ensure all operations work with the verified image.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
The ti_secure_image_check() function may relocate the image during
authentication, updating image_addr to point to the verified location.
The caller was not updated with this new address, causing it to
reference the original unverified location.
Update p_image with the verified image address after authentication
to ensure subsequent operations use the correct location.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
When compiling for R5 with CONFIG_TI_PRUSS enabled, the
pruss_probe() function passed a u64* to ofnode_get_addr_size_index(),
which expects an fdt_size_t*. This caused a compiler error
about incompatible pointer types.
Cast the size pointer to fdt_size_t* to match the function
signature.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
When compiling for R5 core with CONFIG_REMOTEPROC_TI_K3_R5F,
passing 'size' (ulong) to ti_secure_image_post_process() caused
a type mismatch compiler error.
On platforms where ulong and size_t differ in size, directly
casting could lead to out-of-bounds memory access. Fix by
introducing a size_t temporary variable, passing it to the
function, and writing back the potentially modified value for
use in subsequent calls.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Acked-by: Andrew Davis <afd@ti.com>
The device tree contained a duplicate DT node 'main_mmc1_pins_default',
which was already defined a few lines below. This patch removes the
redundant entry.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Add support for reading out the MAC address from SoC fuses on DH STM32MP1 DHSOM.
The DH STM32MP1 DHSOM may contain external ethernet MACs, which benefit from the
MAC address stored in SoC fuses as well, handle those consistently. This however
means the architecture setup_mac_address() cannot be used and instead a simpler
local fuse read out is implemented in the board file.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The STM32MP13xx DHCOR SoM is populated with M24256 EEPROM that contains
an additional write-lockable page called ID page, which is populated with
a structure containing ethernet MAC addresses, DH item number and DH serial
number.
Read out the MAC address from the WL page between higher priority SoC fuses
and lower priority plain EEPROM storage area. Read out the DH item and serial
numbers and set environment variables accordingly.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Move dh_add_item_number_and_serial_to_env() to common code, so it
can be used by both STM32MP13xx and iMX8MP DHSOM. No functional
change.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Commit 6d91f0a3a1 ("board: st: common: cleanup dfu support") split
the vendor-specific DFU implementation into two files, but failed to
update other non-ST boards. This did not lead to noticeable breakage
with plain simple dfu-util, but it makes the ST proprietary programmer
CLI tool end in an infinite loop. Update the Makefile accordingly to
allow even that kind of tooling to work.
Fixes: 6d91f0a3a1 ("board: st: common: cleanup dfu support")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Split the DH STM32MP13x based boards from ST STM32MP13x target,
this way the DH board specific code can be reused for STM32MP13x
DHSOM.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Switch etzpc bus to simple-bus to prevent breakage on non-TFA systems.
This fixes boot of every STM32MP15xx DHSOM device.
Fixes: ad3cdc677d ("ARM: stm32mp: add ETZPC system bus driver for STM32MP1")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add missing CPU_STM32MP255* cases in get_eth_nb() so that U-Boot
correctly reports 2 Ethernet interfaces on stm32mp255 devices.
This fixes the "ethernet not found" error during boot.
Signed-off-by: Md Asadullah <md.asadullah@eds-india.com>
Initially there was only one DSI bridge with one panel attached to this
device. This explained the call to uclass_first_device_err(UCLASS_PANEL,
...) which worked fine at the time.
Now that multiple bridges and panels, with different technologies, can
be plugged onto the board this way to get the panel device is outdated.
The lookup is done is two steps. First we circle through the
UCLASS_VIDEO_BRIDGE, and once we get one, we search through its
endpoints until we get a UCLASS_PANEL device available.
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
STM32MP2 SoCs feature a new version of the LTDC IP. This new version
features a bus clock, as well as a 150MHz pad frequency. Add its
compatible to the list of device to probe and handle quirks. The new
hardware version features a bus clock.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
The LVDS Display Interface Transmitter handles the LVDS protocol:
it maps the pixels received from the upstream Pixel-DMA (LTDC)
onto the LVDS PHY.
The LVDS controller driver supports the following high-level features:
• FDP-Link-I and OpenLDI (v0.95) protocols
• Single-Link or Dual-Link operation
• Single-Display or Double-Display (with the same content
duplicated on both)
• Flexible Bit-Mapping, including JEIDA and VESA
• RGB888 or RGB666 output
• Synchronous design, with one input pixel per clock cycle
• No resolution limitation.
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Add the compatible "panel-lvds" for simple-panel driver in U-Boot. In
Linux this compatible is managed by the driver
drivers/gpu/drm/panel/panel-lvds.c but in U-Boot the specific LVDS
features (bus_format/bus_flags) are not supported.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
The "Display Timings" in panel-common.yaml can be provided by 2 properties
- panel-timing: when display panels are restricted to a single resolution
the "panel-timing" node expresses the required timings.
- display-timings: several resolutions with different timings are supported
with several timing subnode of "display-timings" node
This patch update the parsing function to handle this 2 possibility
when index = 0.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Add st,adc_usb_pd property in /config node for stm32mp135-dk-u-boot.
This needed to check board USB power delivery.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Add support of STM32 ADCs to STM32MP13x. This patch introduces
stm32_adc_regspec structure, as this is already done in kernel
driver, to manage smartly the differences in register set
between STMP32MP15 and STM32MP13 ADCs.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
