Similar to AArch64's case, Clang may wrongly fold accesses to gd pointer
which is defined with register qualifier into constants, breaking
various components.
This patch defines gd as a macro when building with Clang or LTO, which
expands to get_gd() that accesses gp pointer in assembly, making RISC-V
ports function properly and preparing for introduction of LTO in the
future. Board initialization code is also adapted for non-assignable gd.
Reported-by: Nathaniel Hourt <I@nathaniel.land>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Drop filename property for proper U-Boot entry since binman takes
"u-boot-nodtb.bin" as the default filename for u-boot-nodtb entries.
This follows efe9c12322 ("riscv: dts: binman.dtsi: Switch to
u-boot-nodtb entry for proper U-Boot") to clean binman.dtsi up.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Unlike ARM and X86, booting 32-bit images on 64-bit CPUs is currently
not supported for Risc-V. Hence, for bootm, disallow booting a FIT
or a legacy image that was built for an arch type which is different
than the current arch and for booti, set the arch type to be the
same as the current arch.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Select between the 32-bit or 64-bit arch type for the image headers
depending on how the build is configured.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Similar to ARM and X86, introduce a new image type which allows u-boot
to distinguish between images built for 32-bit vs 64-bit Risc-V CPUs.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Maxim Moskalets <maximmosk4@gmail.com>
That's how it looks like without CONFIG_MMC_SUPPORTS_TUNING before the
patch:
aarch64-buildroot-linux-gnu-ld.bfd: drivers/mmc/cv1800b_sdhci.o: in function `cv1800b_execute_tuning':
drivers/mmc/cv1800b_sdhci.c:47:(.text.cv1800b_execute_tuning+0x50): undefined reference to `mmc_send_tuning'
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Pull request efi-2025-07-rc3-2
Documentation:
* Add test/py/requirements.txt to documentation
* Use globing for selecting pytest files
UEFI:
* Provide a function to disable ANSI output during tests
Other:
* test: allow multiple config options in buildconfigspec
* test: allow testing with NET_LWIP=y
In some cases we have alternative configuration options that supply the
same functionality, e.g CONFIG_NET and CONFIG_NET_LWIP.
Allow to specify all of them as arguments for buildconfigspec() and execute
the text if any of these is fulfilled, e.g.
@pytest.mark.buildconfigspec('net', 'net_lwip')
Update the documentation.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
After the original series was merged, Quentin noted that we could handle
adding additional tests more easily by using the glob feature. Do so.
Suggested-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
As noted by Quentin, in CI we should be at least versioning the pytest
that we install. To avoid problems later, go with the whole requirements
file being used. Furthermore, our documentation building for readthedocs
must also have pytest so install the requirements file there as well.
Reported-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
We don't want ANSI escape-sequences written in tests since it is a pain
to check the output with ut_assert_nextline() et al.
Provide a way to tests to request that these characters not be sent.
Add a proper function comment while we are here, to encourage others.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Now that cyclic_unregister() is safe to call on a not-registered
cyclic_info, we can make cyclic_register() behave like the mod_timer()
and hrtimer_start() APIs in linux, in that they don't distinguish
between whether the timer was already enabled or not; from the point
of the call it is, with whatever timeout/period is set in that most
recent call.
This avoids users of the cyclic API from separately keeping track of
whether their callback is already registered or not, and even if they
know it is, can be used for changing the period (and/or the callback
function) without first doing unregister().
See also this recent'ish message from kernel maintainer Thomas
Gleixner on that API design for timer frameworks:
https://lore.kernel.org/lkml/87ikn6sibi.ffs@tglx/
First of all the question is whether add() and mod() are really
valuable distinctions. I'm not convinced at all. Back then, when we
introduced hrtimers, we came to the conclusion that hrtimer_start()
is sufficient.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Make cyclic_unregister() safe to call with an already unregistered, or
possibly never registered, struct cyclic_info. This is similar to how
the various timer APIs in the linux kernel work (they all allow
calling delete/cancel/... on an inactive timer object).
This means callers don't have to separately keep track of whether
their cyclic callback is registered or not, and avoids them trying to
peek into the struct cyclic_info for that information - which leads to
somewhat ugly code as it would have to be guarded by ifdef
CONFIG_CYCLIC.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Commit f6eff35b8c ("cmd: tlv_eeprom: handle -ENODEV error from
read_eeprom function") removed the needed 'return 0' after a successful
read. As a result, the usage message is shown when 'tlv_eeprom read' is
successfully called.
Let's fix it by adding the needed 'return 0'.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Enable DM_SERIAL for Marvell Kirkwood boards that have not been converted.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
This device has a hardware random number generator. Linux can
use this feature to randomize the location of the kernel in
memory for better security. However, that functionality is only
available if the bootloader firmware provides it. Enable support
for it in the default configuration for this device.
Signed-off-by: Benjamin Schneider <ben@bens.haus>
Reviewed-by: Stefan Roese <sr@denx.de>
With commit cc4e8af2c5, fsl_enetc register accessors have been split to
handle different register offsets on different SoCs. However, for
internal MDIO register calculation, only ENETC_PM_IMDIO_BASE was fixed
without adding the SoC specific MAC register offset.
As a result, the network support for the Kontron SMARC-sAL28 and
probably other boards based on the LS1028A CPU is broken.
Add the SoC specific MAC register offset to calculation of imdio.priv to
fix this.
Fixes: cc4e8af2c5 ("net: fsl_enetc: Split register accessors")
Signed-off-by: Thomas Schaefer <thomas.schaefer@kontron.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LS1028A
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx95_19x19_evk
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alice Guo <alice.guo@nxp.com>
On 32-bit systems, e.g. i.mxrt-1170 fdt_addr_t may only be 32-bit.
Cast to a "long long" for garbage avoidance.
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
The commit ac30d90f33 ("clk: Ensure the parent clocks are enabled
while reparenting") add a call to clk_enable() for the parent clock.
For clock drivers that do not implement the enable() ops, like most
Rockchip clock drivers, this now cause the set_parent() ops to never
be called when CLK_CCF=n (default for Rockchip).
clk_enable() typically return -ENOSYS when the enable() ops is not
implemented by the clock driver, with CLK_CCF=y clk_enable() instead
return 0 when the enable() ops is unimplemented.
Change to ignore -ENOSYS from the newly introduced clk_enable() call to
fix this regression and restore the old behavior of set_parent() ops
being called regardless of if enable() ops is implemented or not.
Fixes: ac30d90f33 ("clk: Ensure the parent clocks are enabled while reparenting")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Dang Huynh <danct12@riseup.net>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Imitate in dtbdump what initrddump does for color,
newlines and input handling. The output parsing in
the CI is strict and with the current output the CI
is not recongnizing the prompt '=>'.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Mention that RISC-V supports semihosting.
Update the link to ARM's semihosting documentation
Update SPDX identifier to current format.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add this test to the documentation. No changes to the test itself were
required.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add this test to the documentation. There was already a function comment
that included the argument, so convert it to the right style to be
rendered correctly in output.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add this test to the documentation. None of the functions had comments,
so attempt to explain what each does.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add this test to the documentation. We need to add a code-block
annotation to the example and indent it correctly. We also need to
document the do_test_efi_helloworld_net function and that in turn means
changing the documentation to test_efi_helloworld_net_http and
test_efi_helloworld_net_tftp to reflect what is and isn't done in those
functions themselves now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add this test to the documentation. We need to move the import to follow
the main comment so that it renders correctly, and add a code-block
annotation to the example and indent it correctly. Next, neither of the
functions had comments themselves, so document them now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add this test to the documentation. While the diff appears large at
first, the only changes within the test are to move the imports to
follow the pydoc comment and then to code-block and indent the example
configuration.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Some of the functions were missing pydoc comments. Add them so they will
be included in the documentation.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add the test_net_boot.py test to the generated documentation. While most
of this was already commented correctly for inclusion the biggest
problem was examples of code without a code-block notation. This in turn
broke parsing. Add the missing notations. We also must have the comment
prior to any import lines or it will not be seen as a comment on the
overall file and thus not included.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
In order to easily document pytests, we need to include the autodoc
extension. We also need to make sure that for building the docs, CI
includes pytest and that we have PYTHONPATH configured such that it will
find all of the tests and related files. Finally, we need to have our
comments in the test file by in proper pydoc format in order to be
included in the output.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Begin the work of documenting all of our pytests. To do this, we should
have a directory under develop for it as there will be a large number of
new files. As the current document is referenced externally in a number
of locations, add the sphinx_reredirects module so that we can redirect
from the old location to the new.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
