In phy_info_parse all uses of the variable phyaddr are as an int so
declaring as u32 is not useful and prevents the test for an error return
from fdtdec_get_int ever detecting an error. Change phyaddr to be an
int.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
You cannot test an unsigned char to be >= 256. Instead make the
variables start and end to be ints.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In mv88e6xxx_port_enable when attempting to mask out the previous
settings of two bits a logical operator was used instead of a bitwise
operator. Fix this.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In mtk_eth_of_to_plat, the last error check has the value in
'priv->phy_addr' but returns ret. Correct to return 'priv->phy_addr'
instead.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In ldpaa_eth_open a memset is used to initialise a struct to 0 but the
size passed is that of a different struct. Correct to pass the sizeof
the struct that is being initialised.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
The header of LiMon imported files reference a License file which
does not exist in U-Boot. Some files were forgotten when adding the
SPDX-License-Identifier.
The LiMon files were originally licensed under GPLv2 as can be seen in
commit [2ea91039].
Based on this commit, add the correct SPDX license identifier.
While at it drop the reference to the non-existing License file from all
LiMon files and update the SPDX-License-Identifier to SPDX version 3.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Add Kconfig symbol LWIP_ICMP_SHOW_UNREACH which, when enabled, prints a
message to the console upon reception of ICMP unreachable messages. For
example:
$ make qemu_arm64_lwip_defconfig
$ qemu-system-aarch64 -M virt -cpu max -nographic -bios u-boot.bin
[...]
=> dhcp
DHCP client bound to address 10.0.2.15 (0 ms)
=> tftp 192.168.0.100:69:Image
Using virtio-net#32 device
TFTP from server 192.168.0.100; our IP address is 10.0.2.15
Filename 'Image'.
Load address: 0x40200000
Loading: ICMP destination unreachable (host unreachable) from 192.168.0.16
Timeout!
=> tftp 192.168.0.16:69:Image
Using virtio-net#32 device
TFTP from server 192.168.0.16; our IP address is 10.0.2.15
Filename 'Image'.
Load address: 0x40200000
Loading: ICMP destination unreachable (port unreachable) from 192.168.0.16
Timeout!
=>
Submitted upstream as https://github.com/lwip-tcpip/lwip/pull/73.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
get_timer returns a ulong value representing system time in ms.
On a 64-bit system, this ulong value is 64 bits long. However,
the driver stores it in a 32-bit unsigned integer, which overflows
after 49 days up time, causing the driver to get an incorrect time.
Replace the unsigned int variable with a ulong type to properly store
the value returned by get_timer.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
In comphy_cp110_init_serdes_map in comphy_cp110.c there are two fields
in cfg, comphy_lanes_count and comphy_mux_bitcount, which are fetched
from the FDT blob with fdtdec_get_int which returns an int. These two
fields are then tested for being negative. However the fields are
declared as unsigned so those tests must always fail. Change the
declaration of those fields to be int instead of u32 and the code will
work as expected.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
The limit checks in get_speed_string and get_type_string are off by 1 as
they do not account for the maximum index into an array that can be used
is 1 less than the number of elements in that array. Adjust the limit
checks to allow for this.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
In vsc8514_config there is a while loop for detecting a config failure
using a timeout counter with a post-decrement. In the case of a timeout
this will result in the loop exiting with timeout == -1 so use that as
the test below the loop to detect that the timeout occurred.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
In octeontx_smi_probe if an error is detected then memory that was
allocated is not freed. Small refactor of the code to use a common
return and free memory. Also return -ENOMEM for an allocation failure.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In nicvf_cq_handler there is a test for !cqe_count which will return if
true so it is guaranteed that cqe_count will true after that point. This
makes the later test for cqe_count redundant so it can be removed.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In nicvf_rcv_pkt_handler there is no need to initialise err as it is
assigned to immediately after. Also the test for !pkt will return if
true meaning that pkt is guaranteed to be true after that code block and
so no need to test for it and the redundant test can be removed.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
The bootmeth rauc should scan all partitions, in particular whole
devices, and not be a global method. There may exist multiple RAUC
systems on different devices and they should all be detected. This also
fixes a bug, where both a global bootflow and one using an actual,
complete device would be detected at the same time, when scanning for
valid bootflows.
Signed-off-by: Martin Schwan <m.schwan@phytec.de>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
As part of renaming environment related Kconfig options,
ENV_MMC_SW_PARTITION was inadvertently changed from a string to a bool.
Correct this.
Fixes: ffc4914703 ("env: Rename ENV_MMC_PARTITION to ENV_MMC_SW_PARTITION")
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/27379
- Board: mbv: Prepare MBV for CI
- Board: MPFS Icicle Kit cleanup
- Board: Add Andes Voyager board support
- RISCV: Update SYS_BOOTM_LEN to commonly used value
- starfive: fix return code of `mac write_eeprom`
- arch/riscv/lib: update memmove and memcpy for big-endian
Change the shift patterns for the unaligned memory move and copy code
to deal with big-endian by definign macros to change the shfit left and
right to go the opposite way.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
When writing the EEPROM fails, the command usage help text is displayed
after the error message. We should only display the error message instead.
If writing the EEPROM fails, return CMD_RET_FAILURE (1) instead of
CMD_RET_USAGE (-1).
Fixes: aea1bd95b6 ("eeprom: starfive: Enable ID EEPROM configuration")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: E Shattow <e@freeshell.de>
Introduce Voyager board specific code, including
- dram info
- shared cache enabling
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Introduce the initial device tree support for Andes Voyager board.
We will convert to OF_UPSTREAM once the patch series for kernel is merged.
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The Voyager is Andes' first RISC-V development board.
It is built around Qilai SoC,
which includes Andes AX45MP quad-core cluster.
Introduce the Kconfig entry for the Voyager board.
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Explicitly specify the type by replacing macro with variable
to fix the possible compilation warning.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
A new system controller driver has been created to make code modular and
improve and clean code. Update and remove functions to account for these
additional drivers.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable the MPFS mailbox and system controller drivers for use with the
Icicle kit. These functions are crucial for the board setup functions
that run in the Icicle board file - mpfs_icicle.c.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This driver provides an interface to access the functions of the system
controller on the Microchip PolarFire SoC.
This driver includes functions to use the system controller to read
the device serial number.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This driver adds support for the single mailbox channel of the MSS
system controller on the Microchip PolarFire SoC.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Move ethernet mac address setting to ft_board_setup() to remove the need
for fdt set in custom boot script.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable CONFIG_OF_BOARD_SETUP and other dependencies to allow the use of
the ft_board_setup() function to replace fdt set in boot scripts for
Microchip's MPFS Icicle kit.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The commit d92fdb6067 ("binman: Add option for pointing to separate
description") added support for separating binman description to own file
not the be the part of DT for OS.
The main reason is that binman is not passing dt schema validation that's
why want to keep it separated.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Properties didn't match dt binding that's why should be fixed.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
OpenSBI expects mmu-type to be present in DT that's why add it. Without it
OpenSBI disable CPU node which ends up in not working boot.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
There is no reason to use OF_BOARD for MBV because reduced DT is used by
SPL and full DT is passed via u-boot.img or u-boot.itb. There is no reason
to pick up DTB from certain address.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Increase Icicle's SYS_BOOTM_LEN to 0x4000000 which is the new default
value.
Done on Conor Dooley's request.
Signed-off-by: Martin Herren <sputnik@on-the-web.ch>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Remove CONFIG_SYS_BOOTM_LEN from all riscv defconfigs where the new
default value is used.
Signed-off-by: Martin Herren <sputnik@on-the-web.ch>
Acked-by: Michal Simek <michal.simek@amd.com> # xilinx_mbv
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
For all riscv defconfigs that use the current default value.
This is done in provision of changing the default value to the most
common used value of 0x4000000.
Signed-off-by: Martin Herren <sputnik@on-the-web.ch>
Acked-by: Michal Simek <michal.simek@amd.com> # xilinx_mbv
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
ifdef CONFIG_CPU only works in U-Boot proper but macro is not working when
XPL phases are used. In this case CONFIG_SPL_CPU is also defined and can be
disabled which is causing compilation error.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
