Print DM firmware's version in the boot up process of K3 devices,
having DM capability(DM as a separate binary).
Signed-off-by: Moteen Shah <m-shah@ti.com>
Add a function to print version of the DM firmware in use.
The function queries the firmware capabilities first and if
DM split mode bit is set, sends a request to TISCI for
retrieving the version information.
The DM split mode bit indicates that DM is a separate binary
altogether and hence it will have its own versioning.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add a function to retrieve information of the DM firmware's ABI versions,
RM/PM HAL, firmware version, etc using TI_SCI protocol.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Add a new function to query the capabilities of the DM firmware, using
TI SCI protocol to retrieve a 64-bit firmware capability, where each bit
represents a specific capability supported by the firmware.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Introduce response and request structs to receive and request
information regarding DM version, etc from TI SCI.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Introduce response and request structs for receiving information
regarding FW/SOC capability from DM. The received capability can
further be used to call certain API's based on the feature supoorted
by the DM firmware.
Signed-off-by: Moteen Shah <m-shah@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link the default firmware in the environment variable for MCU R5 core1
for all J7 platforms.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Acquire processor control before doing core reset operations in probe
routine. Release the control afterwards, so that it can be acquired
during core loading operations.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
During boot, ROM can bring up the MCU R5F cores in either lockstep or
split mode based on X509 certificate flags. If booted in split mode,
core 0 will run DM firmware and second core sits in WFI. Add support to
shut down core 1 so that other firmwares can later be loaded on them.
The shutdown of MCU R5 Core 1 is invoked at A72 SPL init, as by that
time Device Manager (DM) is up and running on R5 Core 0. The shutdown
request of Core 1 is handled by Device Manager itself.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Currently the MCU R5 processor ids and device ids are only defined for
R5 SPL Stage. Expose these ids always so that A72 SPL can utilize this
information to shutdown MCU R5 Core 1 when booted in Split mode.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Add a bootmeth driver which supports booting A/B system with RAUC as
their update client.
Signed-off-by: Martin Schwan <m.schwan@phytec.de>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Add support of Renesas R-Car Gen4 watchdog timer. Timeouts up to
8184.0s are supported (CKS1 register is not involved). The watchdog
uses the clock of type CLK_TYPE_GEN4_MDSEL.
The timeout is set in
dts/upstream/src/arm64/renesas/r8a779f0-spider-cpu.dtsi section &rwdt.
This driver is based on upstream linux commit:
e70140ba0d2b("Get rid of 'remove_new' relic from platform driver struct")
Signed-off-by: Shmuel Leib Melamud <smelamud@redhat.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xeb300000 does not make it into
board .config on either R-Car V4H White Hawk or Sparrow Hawk, remove
this configuration option. The early SPL stack is however pointing
into the RT-VRAM and may corrupt payload loaded into the RT-VRAM by
the BootROM. Set the early SPL stack at fixed location at the end of
System RAM instead, where it cannot interfere with the payload loaded
into RT-VRAM.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Rasmus Villemoes <ravi@prevas.dk> says:
While looking through list.h, I saw that the regular list_* helpers
(and one of the hlist_* ones) still contain the prefetch() that was
removed in linux 14 years ago. It doesn't do anything, but makes the
macros harder to read, so get rid of it, and the fallback, no-op
definition that they relied on. That requires removing a few uses
outside list.h as well.
checkpatch warns about some whitespace issues in list.h, but as I've
copied whole kerneldoc+#define blocks directly from the linux kernel,
I think it's better to just accept that so that we don't introduce
needless diffs. The "macro argument reuse" arguments should also be
ignored, as e.g. the "member" arguments are obviously always just bare
identifiers, and the "pos" arguments must be assigned to multiple
times.
Link: https://lore.kernel.org/r/20250507121246.518691-1-ravi@prevas.dk
None of the list helpers use prefetch() anymore, and no C code relies
on getting this definition from list.h. In any case, such an arch/cpu
specific thing does not belong in a header that just consists of cpp
helper macros.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
AFAICT, CONFIG_CPU_HAS_PREFETCH has never existed as a proper Kconfig
symbol in U-Boot, nor has any board include file ever defined it.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
These all end up using the no-op prefetch() defined in linux/list.h,
because the only possible real implementation is in
arch/mips/include/asm/processor.h, which is behing
CONFIG_CPU_HAS_PREFETCH which is nowhere defined.
In order to be able to drop that fallback definition from list.h,
first remove all uses.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
The use of prefetch() in these list helpers was dropped back in 2011
in linux (e66eed651fd1 ("list: remove prefetching from regular list
iterators")). No arch in U-Boot defines any actual prefetch(), and as
the referenced commit says, it's usually not a win anyway.
Whole-sale sync of list.h is not really feasible, but we can
synchronize the macros containing a prefetch() with their linux
implementations as of v6.15-rc5, also importing the various helpers
needed, e.g. list_is_head() and list_next_entry().
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Add support of CLK_TYPE_GEN4_MDSEL clock type to gen3_clk_get_rate64()
function. In particular, this type of clock is used by Renesas R-Car
Gen4 watchdog. It operates similarly to CLK_TYPE_GEN3_MDSEL clock.
Signed-off-by: Shmuel Leib Melamud <smelamud@redhat.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Stefan Roese <sr@denx.de>
The bootph-* tags are now part of mainline Linux DTs as commits:
f1a1268572cc ("ARM: dts: renesas: rcar-gen2: Add boot phase tags")
399f14ff6625 ("arm64: dts: renesas: rcar: Add boot phase tags")
624b2a23d46a ("arm64: dts: renesas: rzg2: Add boot phase tags")
Drop local duplicates of the same tags, as well as duplicate
property assignments which are part of the core DTs themselves.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Patrick Delaunay <patrick.delaunay@foss.st.com> says:
Fix and add documentation/tests for selection by string for known
partition type GUID introduced by bcb41dcaef ("uuid: add
selection by string for known partition type GUID"):
- split list_guid for short name (used also for partiton
description with type parameter) and full name to display
information
- as the function are uuid_str_to_bin() / uuid_guid_get_str()
are no more under CONFIG_PARTITION_TYPE_GUID, since commit
31ce367cd1 ("lib/uuid.c: change prototype of uuid_guid_get_str()")
and commit c1528f324c ("lib: compile uuid_guid_get_str if
CONFIG_LIB_UUID=y") move the content of array under EFI_PARTITION
and linker will remove it is not used it (in SPL)
- Add and fix documentation for gpt command
- Add test test_gpt_write_part_type to test "type=" parameters
This first patch solves an issue for the "system" shortcut for ESP,
removed by commit d54V3 version solve issue for "ESP" support when
CONFIG_CMD_EFIDEBUG and CONFIG_EFI is not activated
for example for test with qemu-arm-sbsa defconfige1004b8b1 ("lib/uuid.c: use unique name
for PARTITION_SYSTEM_GUID") but used in 2 location (at least):
1- board/samsung/e850-96/e850-96.env:10:
partitions=name=esp,start=512K,size=128M,bootable,type=system;
partitions+=name=rootfs,size=-,bootable,type=linux
2- arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c:1151
case PART_ESP:
/* EFI System Partition */
459219 type_str = "system"
....
offset += snprintf(buf + offset,
buflen - offset,
",type=%s", type_str);
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/26699
Link: https://lore.kernel.org/r/20250616112749.17311-1-patrick.delaunay@foss.st.com
Add information on type partition, copied from README.gpt.
I also correct issue for gpt_parts variable and add example of
"gpt read" usage.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add support of optional shortname for parameter 'type' of gpt
command (limited by UUID_STR_LEN) and a separate 'description'
for UID format "%pUs" used in 'part list' output.
When 'description' is absent in list_guid[], the optional
shortname is used as fallback.
Many partition types for EFI have no shortcut yet, but only
description as they are only used to display information.
This patch also restores the "system" as short name for EFI
System Partition (ESP).
Fixes: d54e1004b8 ("lib/uuid.c: use unique name for PARTITION_SYSTEM_GUID")
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Contrary to the datasheet, setting both DETACH and PULLD_DIS bits to 1
does not always drive the DP and DM lines to high-impedance. This
prevents the host from reliably detecting a USB disconnect and subsequent
reconnect.
The symptom is that the first gadget command (e.g., dhcp) succeeds, while
subsequent commands (e.g., nfs) fail.
Disabling and re-enabling the controller entirely, instead of toggling the
PULLD_DIS bit, reliably generates a disconnect event.
The Linux driver works correctly because gadget_disconnect/gadget_connect
are always followed by gadget_udc_start/gadget_udc_stop. In U-Boot
pullup() is used solely.
This behavior has been observed on the SAM9X60-Curiosity and
AT91SAM9G25-EK boards and has been reported to Microchip.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Link: https://lore.kernel.org/r/20250602-pullup-v1-1-edcde5a050dd@hifiphile.com
[mkorpershoek: reworded commit title + comment to usba_udc_pullup()]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Remove duplicate .ops assignment that was overriding the correct
ti_musb_gadget_ops with musb_usb_ops (host ops) in the ti_musb_peripheral
driver. This was causing U-Boot crashes when trying to call the
handle_interrupts operation since the wrong ops structure was being used.
Fixes: 7d98dbcc3d ("usb: musb-new: Add support for DM_USB")
Fixes: 281eaf1ed8 ("usb: gadget: musb: Convert interrupt handling to usb_gadget_generic_ops")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250611171031.840277-1-kory.maincent@bootlin.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
The third_arg for a dfu alt is read as an integer and is overloaded for
different supported backends. For ext4 and fat, this third_arg
represents the partition and forms the dev part string, which should
have its partition in hex. This commit fixes dfu ext4/fat usage for
devices with ten or more partitions.
Signed-off-by: Ivan Pang <ipman@amazon.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20250611050127.38011-1-ipman@amazon.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Writing to eMMC on RK3528 is affected with the same or a similar issue
as on RK3588, where eMMC must init to HS200 at least once to fully work.
Trying to write u-boot-rockchip.bin to eMMC fails with:
=> mmc write $fileaddr 40 5000
MMC write: dev # 0, block # 64, count 20480 ... mmc write failed
0 blocks written: ERROR
For U-Boot to enable HS200 mode the mmc-hs200-1_8v prop must be defined
in the device tree. Linux does not seem to be affected and is able to
detect and use HS200 without this prop.
Enable use of HS200 and fix eMMC write on RK3528 by adding the missing
mmc-hs200-1_8v prop for affected boards:
=> mmc write $fileaddr 40 5000
MMC write: dev # 0, block # 64, count 20480 ... 20480 blocks written: OK
Fixes: b112a44531 ("board: rockchip: Add minimal generic RK3528 board")
Fixes: ccbddf6453 ("board: rockchip: Add Radxa E20C")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Raspberry Pi 5 can now have up to 16 GiB of RAM where the memory spans 8
DRAM banks in total. Increase the config value to 8 to initialize the
whole RAM. Without this change, kernel only sees 8 GiB of RAM on the 16
GiB CM5 as reported in [1].
[1] https://github.com/home-assistant/operating-system/issues/3989
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Sync bitfield.h header with Linux 6.15 version. Mainly is to permit the
introduction of FIELD_PREP_CONST. The bug.h header changed to
build_bug.h doesn't cause any regression as we also ship split header
similar to how it's done with in Linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The GENMASK/GENMASK_ULL macro requires inclusion of linux/bitops.h
header. It does currently work as bitfield.h includes it indirectly
but this will change when bitfield.h will be synced with new Linux
version.
Also raw printf require linux/bug.h header (also currently included
indirectly by bitfield.h)
Explicitly include the headers to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The WARN macro requires inclusion of linux/bug.h header. It does
currently work as bitfield.h includes it indirectly but this will
change when bitfield.h will be synced with new Linux version.
Explicitly include the header to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The WARN macro requires inclusion of linux/bug.h header. It does
currently work as bitfield.h includes it indirectly but this will
change when bitfield.h will be synced with new Linux version.
Explicitly include the header to fix future compilation error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
E Shattow <e@freeshell.de> says:
Make consistent use of lowercase hexadecimal prefix '0x' throughout U-Boot.
There are a few remaining uses of uppercase 'X' to denote hexadecimal prefix
or placeholder in documentation and error messages.
External devicetree-rebasing dts/upstream and the generated code of
xilinx/zynq are ignored for the series.
Link: https://lore.kernel.org/r/20250606224558.1117422-1-e@freeshell.de
Use consistent lowercase hex prefix style in drivers/*
Does not change hex prefix case in allcaps uppercase style error messages
Signed-off-by: E Shattow <e@freeshell.de>
Use consistent lowercase hex prefix style in board/*
Does not change auto-generated files in xilinx/zynq/*/ps7_init_gpl.c
Signed-off-by: E Shattow <e@freeshell.de>
