board_init_f for the am62a is missing the call to spl_enable_cache which
exists for all other am62 platforms (check am625_init.c &
am62p5_init.c).
This allows the usage of caches while loading and parsing the u-boot.img
FIT resulting in ~2x speedup in the A53 SPL stage.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
There are common MMC args for TI plats in include/environment/ti/mmc.env.
Since we already include this, there is no need to redefine these
MMC vars. Use the defaults.
This seems like something that could have been done while refactoring
these vars in the first place as it happened after this AM62A file
was available hence the fixes tag.
Reported-by: Chirag Shilwant <c-shilwant@ti.com>
Fixes: 3709b52915 ("env: ti: mmc.env: Move mmc related args to common place")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
This clears UHS_MODE_SELECT for timing modes <= MMC_HS_52.
When initializing to HS400 mode, the host controller downgrades to non-uhs
modes so clear UHS_MODE_SELECT at modes <= MMC_HS_52.
This fixes eMMC writes on j7200 EVM.
Fixes: 6067aa66b3 ("mmc: am654_sdhci: Add am654_sdhci_set_control_reg")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The condition here is reversed, which makes link and coral very slow,
leading to lab failures.
Fixes 6c171f7a18 ("common: board: make initcalls static")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
The kernel added new size definitions and substituted the
boilerplate/reference to the license with a SPDX identifier.
Drop a local SZ_8G definition in MediaTek MT7988 SoC board file.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
implement a driver to use semtech pinctrl and
gpio expander, this driver is adapted from a
existent linux driver that is written by
Gregory Bean <gbean@codeaurora.org>.
Signed-off-by: Anis Chali <chalianis1@gmail.com>
Prevent file descriptor leaks by properly closing 'fd' and 'new_fd'
when fstat() or write() operations fail.
- Added close(fd) before return in open_for_read() if fstat() fails.
- Added close(new_fd) before return in write_image() if write() fails.
- No close needed if open() fails (fd == -1 is invalid).
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
More Qualcomm fixes for 2025.07
* Adjust fdtfile logic to support more boards
* Support linux,code variable in qcom-pmic button driver
* Minor CLK API adjustments and apq8096/msm8916 fixes
* vbus regulator register fixes
* dragonboard410c KASLR support and other fixes
Tom Rini <trini@konsulko.com> says:
Hey all,
Related to my other series I've posted recently on cleaning up some
headers, this series here is the result of at least lightly auditing the
#includes used in include/[a-m]*.h. This ignores subdirectories, as at
least in part I think the top-level includes we've constructed are the
most likely places to have some extra transitive include paths. I'm sure
there's exceptions and I'll likely audit deeper once this first pass is
done. This only gets as far as "include/m*.h" because I didn't want this
to get too big. This also sets aside <miiphy.h> and <phy.h>. While
miiphy.h does not directly need <phy.h> there are *so* many users and I
think I had half of the tree just about not building when I first tried.
It might be worth further investigation, but it might just be OK as-is.
Link: https://lore.kernel.org/r/20250521230119.2084088-1-trini@konsulko.com
The value of "ETH_ALEN" is defined to 6 in <linux/if_ether.h>. This file
is included in <net.h>. In the places where we had ETH_ALEN but no
direct include of <net.h>, add <linux/if_ether.h>. In the places where
we had a custom name used, make use of ETH_ALEN instead.
Signed-off-by: Tom Rini <trini@konsulko.com>
There are only a few things found in <mtd.h> today. Go through and audit
the C files which include <mtd.h> and remove it when not required. Then,
add it to the files which had either missed it or had an indirect
inclusion of it.
Signed-off-by: Tom Rini <trini@konsulko.com>
This file does not need <linux/sizes.h> nor <linux/compiler.h> so remove
them. This exposes however that a number of other files had been relying
on this implicit include for <linux/sizes.h> so add that where needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
At this point in time, <ide.h> provides the IDE_BUS macro and the
function prototype for ide_set_reset, which is used with IDE_RESET. The
only files which should include this header are the ones that either use
that macro or that function. Remove <blk.h> from <ide.h> and remove
<ide.h> from places which do not need it.
Signed-off-by: Tom Rini <trini@konsulko.com>
This file does not need <asm/cache.h> so remove it. However the file
common/spl/spl_fat.c does need it, so add it there.
Signed-off-by: Tom Rini <trini@konsulko.com>
In include/efi_loader.h we do not directly need <log.h>, <part_efi.h>,
<pe.h> nor <linux/oid_registry.h> so remove them. In include/efi_tcg2.h
we make use of <part_efi.h> but did not include it, so add it directly.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
This file does not need a forward declaration of 'struct list_head' as
it includes <linux/list.h> so remove it.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
This file does not need <pc.h> but does directly need
<linux/types.h>. Furthermore, arch/x86/lib/bios.c was getting <pci.h>
via <bios_emul.h> so add it there.
Signed-off-by: Tom Rini <trini@konsulko.com>
Align U-Boot image end to 8 bytes to make sure DT alignment requirement
is fulfilled. This fixes a possible failure in fdt_find_separate() in
case the U-Boot image is aligned to 4 Bytes and DT is appended at the
end at already 8 Byte aligned offset.
Link: https://source.denx.de/u-boot/u-boot/-/issues/30
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Change the vcpumntirq in the GICv3 node from SPI to PPI.
Prevents Linux from complaining:
'[Firmware Bug]: CPU interface incapable of MMIO access'
Fixes: 6d722894fd "board: emulation: Add QEMU sbsa support"
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Most device vendors put "Volume Down" button onto PMIC RESIN.
But Sony is special: see
dts/upstream/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi or [1].
They put "Volume Down" on PMIC GPIO 7 where others usually put
"Volume Up", and KEY_VOLUMEUP is inside &pon_resin.
Currently if you boot U-Boot on such Sony device, you end up
with 2 "Volume Down" buttons, and no "Volume Up", which makes
navigating menu problematic.
Support reading devicetree "linux,code" property and override
statically defined button code & label based on that.
[1] https://elixir.bootlin.com/linux/v6.15-rc3/source/arch/
arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi#L263
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Signed-off-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250424014811.3809818-1-alexeymin@minlexx.ru
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
As of commit dc8754e8e4 ("clk/qcom: apq8016: improve clk_enable logging")
there are now warnings in the U-Boot console on DragonBoard 410c:
apq8016_clk_enable: unknown clk id 122
apq8016_clk_enable: unknown clk id 123
apq8016_clk_enable: unknown clk id 124
apq8016_clk_enable: unknown clk id 125
This is because we don't implement enable() properly for the SDCC clocks.
Currently they are being enabled as part of set_rate().
Fix this by moving the enable calls out of the apq8016_clk_init_sdc()
function and convert them to the equivalent GATE_CLK_POLLED() definitions.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250424-apq8016-clock-fixes2-v2-6-fcc371c9e45f@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
GATE_CLK() in its current state is unsafe: A simple write to the clock
enable register does not guarantee that the clock is immediately running.
Without polling the clock status, we may issue writes to registers before
the necessary clocks start running. This doesn't seem to cause issues in
U-Boot at the moment, but for example removing the CLK_OFF polling in TF-A
for the SMMU clocks on DB410c reliably triggers an exception during boot.
Make it possible to poll the branch clock status register, by adding a new
GATE_CLK_POLLED() macro that takes the extra register address. Existing
usages work just as before, without polling the clock status. Ideally all
usages should be updated to specify the correct poll address in the future.
The Qualcomm naming for these clocks is "branch" and not "gate", but let's
keep the existing naming for now to avoid confusion until all others
drivers have been converted.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250424-apq8016-clock-fixes2-v2-4-fcc371c9e45f@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
The SDCC_...(n) macros in clock-apq8016.c result in the wrong addresses:
- SDCC1: SDCC_APPS_CBCR(0) = ((0 * 0x1000) + 0x41018) = 0x41018
Should be 0x42018, this is an invalid register close to the USB clocks.
- SDCC2: SDCC_APPS_CBCR(1) = ((1 * 0x1000) + 0x41018) = 0x42018
Should be 0x43018, this is the SDCC1 clock.
When we try to enable SDCC2, we actually end up enabling SDCC1. When we try
to enable SDCC1, we just issue some broken register writes.
This hasn't caused any trouble so far, because the boot firmware is keeping
both SDCC clocks running. However, if these clocks are disabled when
entering U-Boot, MMC initialization is failing.
Fix this by using the proper offset for the macros. The SDCC_CMD_RCGR() was
already correct, but change it the same way for consistency.
Fixes: 085921368b ("arm: Add support for Qualcomm Snapdragon family")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250424-apq8016-clock-fixes2-v2-1-fcc371c9e45f@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
At the moment, the dragonboard410c_defconfig specifies a custom
SYS_MALLOC_LEN, lower than the default for Qualcomm boards defined in
arch/arm/mach-snapdragon/Kconfig. It looks like it's too low, since
flashing larger sparse partition images using Fastboot fails with:
FAILED (remote: 'Malloc failed for: CHUNK_TYPE_RAW')
We are not really that memory-constrained for U-Boot on DB410c, so fix
this by just dropping the custom malloc size and using the default.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by:
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250417-db410c-fixes2-v1-2-76ad994da152@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Commit 359e1d4a57 ("board: dragonboard410c: Use button_cmd instead of
custom code") was made in parallel with commit 8f5685d5d3 ("button:
qcom-pmic: prettify and standardise button labels"), which changed the
default button label from "vol_down" to "Volume Down". This is causing
errors in the console during boot now:
No button labelled 'vol_down'
Fix this by using the new label.
Fixes: 359e1d4a57 ("board: dragonboard410c: Use button_cmd instead of custom code")
Fixes: 8f5685d5d3 ("button: qcom-pmic: prettify and standardise button labels")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by:
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250417-db410c-fixes2-v1-1-76ad994da152@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
u-boot-dfu-20250602
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26466
Usb gadget:
dwc2: Fix incorrect ULPI_UTMI_SEL bit setting
dwc2: Fix HBstLen setting for external DMA mode
dwc2: Various refactors to get the code closer to Linux
dwc2: Support reset logic for v4.20a
i2c bugfixes for v2025.07-rc4
- designware_i2c: fix globally wrong return value -1 into -ETIMEDOUT
in driver, which leaded in silent errors as a timeout resulted in
an uninitialized value being returned, potentially causing
unexpected behavior.
Change the return value for timeout errors in i2c-designware from 1 to
-ETIMEDOUT. Returning errors as negative values is standard practice in the
u-boot, which enhances error handling consistency across the codebase.
The current behavior can lead to silent errors when functions check for
negative return values to identify errors. For example, in
`dm_i2c_reg_read` from i2c-uclass.c, a timeout results in an uninitialized
value being returned, potentially causing unexpected behavior.
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Wojciech Szamocki <wojciech.szamocki@nokia.com>
Signed-off-by: Wojciech Szamocki <wojciech.szamocki@nokia.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
