CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/22962
Dfu:
- Rely on device tree for spi speed/mode on spi flash
Android Image:
- Fix booting on platforms having > 4GiB of memory
- Decompress boot image to kernel_addr_r when compression is enabled
- Honor CONFIG_SYS_LOAD_ADDR when mkbootimg uses default address
Bcb:
- Rework bcb command to use U_BOOT_LONGHELP
- Move ab_select cmd to bcb cmd
- Implement ab_dump command in bcb
- bcb: Write '_<slot>' instead of '<slot>' to misc partition
Fix the issue introduced by commit fed064477c2c
("arm64: zynqmp: Print an error for split to lock mode switch").
The mini u-boot is hanging, because of the tcm is not initialized.
The mini u-boot is using the tcm to reserve the mmu table and
currently it is not initialized, so allowing u-boot to initialize
the tcm.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20241011113435.1966604-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
As per bootmenu support added default boot options to CC on AMD CCs and
default to SOM on others.
However, if no secondary boot device is enabled in the design,it should
be the default boot option for SOM when combined with AMD CCs because it
only contains SOM peripherals.
To address this issue, The conditional check for the bootmenu_default
variable was removed, and it has always been set to SOM as the default
boot option.
In this way, users can choose preferred boot options from the bootmenu
based on the boot devices configured in the design for AMD CCs.
Fixes: 61bf0fa866 ("xilinx: zynqmp: Add bootmenu support")
Signed-off-by: John Vicky Vykuntapu <johnvicky.vykuntapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/0e30b44ce3b478fdec21edad8d896f4d438ce331.1727867715.git.michal.simek@amd.com
Fix the issue introduced by commit 067e029480
("board: xilinx: Remove conditional check for Microblaze").
The scriptaddr should be physical location not really offset
from start of DDR. When U-Boot is not found boot.scr script
address in device tree, then it is assigned based on script
address and ram base address for Microblaze and i.e exceeding
DDR memory. To fix this, the script address is assigned
initially with offset instead of address. Later it is added
with ram base address and gets the physical address.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20241001082537.830286-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The RPU pytest introduced by commit e894c10c04
("test/py: zynqmp_rpu: Add test for loading RPU apps") expects
3rd parameter as string not a number that's why extend command
to actually handle both. The issue with existing code is that
when any non number string is passed hextoul returns 0. For
backward compatibility zynqmp tcminit 0/1 can be still used but
it is recommended to use strings instead.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20240930043814.530181-3-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The zynqmp tcminit crashes the U-Boot when switching from
r5-mode "split" to "lockstep" instead it should throw an error.
When cpu is enabled, the check_tcm_mode() function checks
if the previous mode is "split", switch mode is "lockstep" then
it returns the error code and the initialize_tcm() function is not
updating the global control register of the RPU instead it prints
the error message. When cpu is disabled, the check_tcm_mode()
function returns the success code for switch split to lockstep mode.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20240930043814.530181-2-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The function prototypes that are defined in the header most likely has
to be marked as static inline. This helps avoiding the compiler warnings:
include/mux.h:120:14: warning: no previous prototype for ‘mux_control_states’ [-Wmissing-prototypes]
include/mux.h:125:18: warning: no previous prototype for ‘mux_control_select’ [-Wmissing-prototypes]
include/mux.h:133:5: warning: no previous prototype for ‘mux_control_deselect’ [-Wmissing-prototypes]
include/mux.h:138:21: warning: no previous prototype for ‘mux_control_get’ [-Wmissing-prototypes]
include/mux.h:143:6: warning: no previous prototype for ‘mux_control_put’ [-Wmissing-prototypes]
include/mux.h:147:21: warning: no previous prototype for ‘devm_mux_control_get’ [-Wmissing-prototypes]
include/mux.h:153:5: warning: no previous prototype for ‘dm_mux_init’ [-Wmissing-prototype ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some functions are not used anywhere except the same file
where they are defined. Mark them static. This helps avoiding
the compiler warnings:
cmd/nvedit.c:201:5: warning: no previous prototype for ‘do_env_ask’ [-Wmissing-prototypes]
cmd/nvedit.c:315:5: warning: no previous prototype for ‘do_env_callback’ [-Wmissing-prototypes]
cmd/nvedit.c:384:5: warning: no previous prototype for ‘do_env_flags’ [-Wmissing-prototype ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
There are no users of the blk_create_device() function outside the uclass.
Let's make it static. This will ensure that new block drivers will use
blk_create_devicef().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
By using blk_create_devicef() instead of blk_create_devicef() the driver
can be simplified and brought into line with other block device drivers.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Johan Jonker <jbx6244@gmail.com>
Add the latest 4000 MT/s DDR config generated by
Jacinto7_DDRSS_RegConfigTool Rev 0.11 for J722S , make it the
default config and update A53 default clock to 1.4 GHz matching
the default speed grade (K).
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
The bootflow_menu.c code depends on e.g. scene_txt_set_font(),
which is only built when CONFIG_EXPO is enabled. Introduce new
Kconfig symbol BOOTSTD_MENU which depends on EXPO to prevent
triggering errors like these in case e.g. CONFIG_VIDEO=n :
"
boot/bootflow_menu.c:158:(.text+0x8851): undefined reference to `scene_txt_set_font'
"
Make the symbol depend on BOOTSTD_FULL as well to get rid of
the Makefile dependency workaround. Since BOOTSTD_FULL is not
available in SPL, do not define SPL variant of BOOTSTD_MENU.
Fix up bootflow test accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The two tools that create android boot images, mkbootimg and the fastboot
client, set the kernel address by default to 0x11008000.
U-boot always honors this field, and will try to copy the ramdisk to
whatever value is set in the header, which won't be mapped to the actual
RAM on most platforms, resulting in the kernel obviously not booting.
All the targets in U-Boot right now will download the android boot image
to CONFIG_SYS_LOAD_ADDR, which means that it will already have been
downloaded to some location that is suitable to use the ramdisk in-place
for header version 0 to 2. For header version 3 and later, the ramdisk
can't be used in-place to use ramdisk_addr_r in this case.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241017-topic-fastboot-fixes-mkbootimg-v2-3-c3927102d931@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
It's really helpful to have the ability to dump BCB block for debugging
A/B logic on the board supported this partition schema.
Command 'bcb ab_dump' prints all fields of bootloader_control struct
including slot_metadata for all presented slots.
Output example:
=====
> board# bcb ab_dump ubi 0#misc
> Read 512 bytes from volume misc to 000000000bf07580
> Read 512 bytes from volume misc to 000000000bf42f40
> Bootloader Control: [misc]
> Active Slot: _a
> Magic Number: 0x42414342
> Version: 1
> Number of Slots: 2
> Recovery Tries Remaining: 0
> CRC: 0x2c8b50bc (Valid)
>
> Slot[0] Metadata:
> - Priority: 15
> - Tries Remaining: 0
> - Successful Boot: 1
> - Verity Corrupted: 0
>
> Slot[1] Metadata:
> - Priority: 14
> - Tries Remaining: 7
> - Successful Boot: 0
> - Verity Corrupted: 0
====
The ab_dump command allows you to display ABC data directly on the
U-Boot console. During an A/B test execution, this test verifies the
accuracy of each field within the ABC data.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3_android
Link: https://lore.kernel.org/r/20241017-android_ab_master-v5-5-43bfcc096d95@salutedevices.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Align with cmd_sf, and try to rely on DT for spi speed and mode,
and still fallback on spi_flash_probe() if it fails.
With the current scheme, spi_flash_probe() will be called
with CONFIG_SF_DEFAULT_SPEED and CONFIG_SF_DEFAULT_MODE
with are set to 0 by default on DT platforms using DM_SPI_FLASH.
Like cmd_sf, keep the option to specify the speed and mode
from the dfu_alt_mode string, but rely on DT properties
if not specified.
Using CONFIG_SF_DEFAULT_SPEED and CONFIG_SF_DEFAULT_MODE
makes the SPIFC controller on Amlogic Meson G12B & SM1
hardware fail and is unable to recover until a system reboot.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20241001-uboot-topic-dfu-sf-dt-v2-2-67f7acfa3ff5@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To smoothly handle the transition from the legacy SPI FLASH
API to the driver model API, add the DM functions
as dummy inline functions.
Today, client code uses #if/#else conditionals, but it's better
to use if(IS_ENABLED()) to make sure all code builds fine
and avoid configuration hell, leaving the compiler remove
the dead code.
An example is cmd/sf, which could make use of those dummy
functions to drop the conditional compilation.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20241001-uboot-topic-dfu-sf-dt-v2-1-67f7acfa3ff5@linaro.org
[mkorpershoek: removed duplicate "the" from commit msg]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
CI: https://dev.azure.com/sr0718/u-boot/_build/results?buildId=378&view=results
* watchdog: gpio_wdt: add support for stoppable devices (Rasmus)
* watchdog: Add DaVinci's watchdog support (Bastien)
* cyclic: disentangling cyclic API from schedule() (Rasmus)
* watchdog: introduce separate SPL symbol for WDT_GPIO (Rasmus)
Currently, enabling WDT_GPIO on a board which uses SPL, but does not
have SPL_WDT, SPL_DM_GPIO or SPL_OF_CONTROL enabled, breaks the build.
Make it possible to use the WDT_GPIO driver on such boards by
introducing a separate symbol controlling whether the driver is built
for SPL. Make it default to WDT_GPIO such that boards that already
have it enabled and all the SPL prerequisites satisfied will continue
to have it in SPL.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Nothing in cyclic.h is needed to define struct global_data, so do not
include that header.
If any .c file relies on getting cyclic.h through asm/global_data.h,
it needs to include it itself.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
This TU currently relies on getting a declaration of schedule()
through some nested include. Include the proper header directly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
These TUs currently rely on getting a declaration of schedule()
through some nested include. Include the proper header directly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
This TU currently relies on getting a declaration of schedule()
through some nested include. Include the proper header directly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
These library routines obviously do not make use of the
cyclic_register() etc. API, but do need to call schedule(). Include
the proper header.
Eventually, their ifdef logic should be updated to avoid talking about
CONFIG_WATCHDOG.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Nobody relies on getting the cyclic API declared by including the
watchdog.h header, but for historical reasons, many TUs include
watchdog.h to get a declaration of schedule(). Now that we have a
dedicated header for just that, include that header instead of
cyclic.h.
Eventually, all TUs that call schedule() should themselves include
u-boot/schedule.h, but this is a step towards getting rid of
unnecessary include statements in cyclic.h and global_data.h.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
The only caller left is schedule(); everybody outside cyclic.c now
calls or references schedule().
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
This is the last place outside of cyclic.c that references
cyclic_run() directly. Replace by schedule(), so that cyclic_run() can
be made private. This also better matches what I believe commit
29caf9305b ("cyclic: Use schedule() instead of WATCHDOG_RESET()")
intended to do.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Prior to commit 29caf9305b ("cyclic: Use schedule() instead of
WATCHDOG_RESET()") we had
/* Currently only needed for fs/cramfs/uncompress.c */
static inline void watchdog_reset_func(void)
{
WATCHDOG_RESET();
}
and .outcb was set to that watchdog_reset_func(). Said commit changed
that .outcb to cyclic_run instead of schedule, which would otherwise
match all the other WATCHDOG_RESET replacements done. As the
HW_WATCHDOG case is not handled by cyclic_run, this seems to be an
oversight.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Modifying a generic header like watchdog.h, removing not directly used
asm/ptrace.h header relies on whoever includes it to already have
included something that defines the type ulong.
Make the asm/ptrace.h header self-contained by including the proper
header.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
This makes use of the cyclic API but relies on implicitly getting the
appropriate declarations through some nested include. Include the
cyclic.h header directly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
