Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that SPL means SPL (only) and is not defined for other phases,
update kconfig rules.
This is done in one patch since otherwise many Binman tests fail.
Signed-off-by: Simon Glass <sjg@chromium.org>
Complete this rename for all directories outside arch/ board/ drivers/
and include/
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the various references to SPL in this document. Make sure to
refer to 'phases' instead of 'stages', which is not a U-Boot term.
Fix a few U-boot typos and try to improve grammar a little while we are
here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The new name 'xPL' is intended to indicate a build of any phase which is
not U-Boot proper. Define it for all such phases.
Note that we also define CONFIG_SPL_BUILD for all xPL builds. This
preserves existing behaviour, but future patches will adjust that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that the conversion of all CONFIG options to Kconfig is complete,
these files only contain the xPL_BUILD defines. Add a comment to make
this clear.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rename this file to indicate that it refers to any non-U-Boot-proper
phase, not just SPL, which is the phase immediately before U-Boot
proper.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is always enabled for U-Boot proper, so simplify the condition
in the common Makefile.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
SPL_BUILD is not a Kconfig symbol. Perhaps the intent here is to use
SPL instead. However, this causes build errors, e.g. with T1024RDB_NAND
So drop the dependency on !SPL_BUILD since it does nothing.
Signed-off-by: Simon Glass <sjg@chromium.org>
SPL_BUILD is not a Kconfig symbol so perhaps the intent here is to
use SPL instead. But that changes the output size.
So drop the dependency on !SPL_BUILD since it does nothing.
Signed-off-by: Simon Glass <sjg@chromium.org>
U-Boot is not picking boot.scr script address from device tree
rather it's using default address for Microblaze platform,
and it's picking for other platforms. Remove conditional check
for Microblaze platform, so that u-boot pick up boot.scr script
address for all platforms from device tree.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20240913093231.2343528-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Linux commits:
15d16d6dadf6 kbuild: Add generic rule to apply fdtoverlay
44f87191d105 kbuild: parameterize the .o part of suffix-search
The Linux commit 15d16d6dadf6 adds a generic rule in Makefile.lib
to automatically apply fdtoverlay, so that each platform doesn't
need to include a complex rule. This also automatically appends
DTC_FLAGS_foo_base += -@ to all base files
The platform's Makefile only needs to have this now:
foo-dtbs := foo_base.dtb foo_overlay1.dtbo foo_overlay2.dtbo
dtb-y := foo.dtb
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240906070808.1045991-2-prasad.kummari@amd.com
This patch fixes timeout issues seen on large NOR flash.
For full-chip erase, where we use the SPINOR_OP_CHIP_ERASE (0xc7)
opcode. Use a different timeout for full-chip erase than for other
commands.
[Ported from Linux kernel commit
09b6a377687b ("mtd: spi-nor: scale up timeout for
full-chip erase") ]
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22363
- Several updates to i.MX9 SOC and i.MX93 EVK.
- Power domain fixes.
- TRDC cleanup and update.
- MAC address layout update.
- Add support for the i.MX9301/9302 variants.
- Add runtime detection of voltage mode.
- Generalize some code for i.MX8M and i.MX9.
- Add support for Comvetia imx6q-lxr board.
This PR contains various improvements in the A/B update logic for EFI
- Read both copies of metadata, in case one of the is corrupted
- Check the metadata version against the running firmware to make sure it's
allowed
- Limit the use of a revert capsule if the board is on a trial state and
make sure it's not applied if the max counter has expired
When dealing with processing of the empty capsule, the capsule gets
applied only when the checks for the empty capsule pass. Print a
message to highlight if empty capsule checks fail, and return an error
value, similar to the normal capsules.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
When in Trial State, the platform keeps a count of the number of times
it has booted in the Trial State. Once the threshold of the maximum
allowed count exceeds, the platform reverts to boot from a different
bank on subsequent boot, thus coming out of the Trial State. It is
expected that all the updated images would be accepted or rejected
while the platform is in Trial State. Put in checks so that it is not
possible to apply an empty capsule once the max Trial Count exceeds.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The FWU code supports both versions of the FWU metadata, i.e. v1 and
v2. A platform can then select one of the two versions through a
config symbol. Put a dependency in the FWU metadata version selection
config symbol to ensure that both versions of the metadata cannot be
enabled.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The platform transitions out of Trial State into the Regular State
only when all the images in the update bank have been accepted. Check
for this condition before transitioning out of Trial State.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Do a sanity check that the version of the FWU metadata that has been
read aligns with the version enabled in the image. This allows to
indicate an early failure as part of the FWU module initialisation.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
In the version 2 of the FWU metadata, the metadata is broken into two
parts, a top-level structure, which provides information on the total
size of the structure among other things. Try reading the primary
partition first, and if that fails, try reading the secondary
partition. This will help in the scenario where the primary metadata
partition has been corrupted, but the secondary partition is intact.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
