exynos_dwmci_get_config() is called from the probe function and used to
read data from device tree. Make use of .of_to_plat driver callback
instead, and convert exynos_dwmci_get_config() to match its signature.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
New Exynos chips should implement clock drivers using CCF framework. In
that case corresponding CCF functions can be used to get/set the clock
rates. Moreover, already existing get_mmc_clk() and set_mmc_clk() calls
are only implemented for CONFIG_CPU_V7A (i.e. ARM32 chips). In case of
ARM64 chips that config option is not defined, so build will crash on
linking stage, with errors like these:
ld: drivers/mmc/exynos_dw_mmc.o:
in function `exynos_dwmci_get_sclk':
undefined reference to `get_mmc_clk'
ld: drivers/mmc/exynos_dw_mmc.o:
in function `exynos_dwmci_set_sclk':
undefined reference to `set_mmc_clk'
Fix that issue by using CCF clocks API on ARM64 platforms for getting
and setting the source clock (sclk = SDCLKIN = CIU) rate. To implement
this, first extract the existing ARM32 clock control code into helper
functions with more generic signatures to abstract getting/setting the
sclk rate. Then add CCF clock support to those functions for ARM64
platforms.
Fixes: a082a2dde0 ("EXYNOS5: DWMMC: Added FDT support for DWMMC")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Pinmux configuration on ARM64 platforms must be performed during startup
in pinctrl driver using info from device tree. exynos_pinmux_config()
and pinmux_decode_periph_id() are only available on ARM32 platforms, so
don't call those functions on ARM64 platforms. Instead of the latter
function, use "non-removable" property from device tree to derive the
dev_index value.
This fixes next linking errors on ARM64 platforms:
ld: drivers/mmc/exynos_dw_mmc.o:
in function `exynos_dwmci_get_config':
undefined reference to `pinmux_decode_periph_id'
ld: drivers/mmc/exynos_dw_mmc.o:
in function `do_dwmci_init':
undefined reference to `exynos_pinmux_config'
Fixes: a082a2dde0 ("EXYNOS5: DWMMC: Added FDT support for DWMMC")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
In case of CONFIG_DM_MMC, host->priv actually holds (struct udevice *),
and not (struct dwmci_exynos_priv_data *). This makes *priv pointer
invalid and may lead to Synchronous Abort during its dereference later
in exynos_dwmci_board_init(). Fix it by extracting
exynos_dwmmc_get_priv() helper from exynos_dwmci_clksel() and using it
for getting the private data in exynos_dwmci_board_init()
Fixes: 3537ee879e ("mmc: exynos_dw_mmc: support the Driver mode for Exynos")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Getting the base address with outdated fdtdec_get_addr() API and further
casting it to (void *) leads to next build warning on ARM64 platforms:
In function 'exynos_dwmci_get_config':
warning: cast to pointer from integer of different size
[-Wint-to-pointer-cast]
host->ioaddr = (void *)base;
Use livetree API instead (dev_read_addr_ptr()), which handles this
correctly.
Fixes: a082a2dde0 ("EXYNOS5: DWMMC: Added FDT support for DWMMC")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Replace fifoth_val property with its fifo-depth counterpart in all DW
MMC drivers. fifo-depth is a common property used in upstream Linux
kernel. The FIFOTH register value will be calculated using fifo-depth
value in DW MMC core (dw_mmc.c). This change reduces code duplication in
platform drivers, and pulls common FIFOTH register value calculation
into core dw_mmc driver where it belongs.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Some DW MMC blocks (e.g. those on modern Exynos chips) support 64-bit
DMA addressing mode. 64-bit DW MMC variants differ from their 32-bit
counterparts:
- the register layout is a bit different (because there are additional
IDMAC registers present for storing upper part of 64-bit addresses)
- DMA descriptor structure is bigger and different from 32-bit one
Introduce all necessary changes to enable support for 64-bit DMA capable
DW MMC blocks. Next changes were made:
1. Check which DMA address mode is supported in current IP-core
version. HCON register (bit 27) indicates whether it's 32-bit or
64-bit addressing. Add boolean .dma_64bit_address field to struct
dwmci_host and store the result there. dwmci_init_dma() function is
introduced for doing so, which is called on driver's init.
2. Add 64-bit DMA descriptor (struct dwmci_idmac64) and use it in
dwmci_prepare_desc() in case if .dma_64bit_address field is true.
A new dwmci_set_idma_desc64() function was added for populating that
descriptor.
3. Add registers for 64-bit DMA capable blocks. To make the access to
IDMAC registers universal between 32-bit / 64-bit cases, a new
struct dwmci_idmac_regs (and corresponding host->regs field) was
introduced, which abstracts the hardware by being set to
appropriate offset constants on init. All direct calls to IDMAC
registers were correspondingly replaced by accessing host->regs.
4. Allocate and use 64-bit DMA descriptors buffer in case when IDMAC
is 64-bit capable. Extract all the code (except for the IDMAC
descriptors buffer allocation) from dwmci_send_cmd() to
dwmci_send_cmd_common(), so that it's possible to keep IDMAC
buffer (either 32-bit or 64-bit) on stack during send_cmd routine.
The insights for this implementation were taken from Linux kernel DW MMC
driver.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Prepare for adding 64-bit IDMAC descriptors by renaming current 32-bit
descriptor and its fields accordingly. While at it, make use of
virt_to_phys() to make it more obvious in which places the physical
addresses have to be used.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Make dwmci_prepare_data() function easier to read by extracting the
preparation of IDMAC descriptor into a dedicated function.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Make dwmci_send_cmd() easier to read by moving the DMA transfer handling
code into a dedicated function.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
FIFO data transfer is implemented as quite a massive chunk of code.
Extract it into a dedicated function to make dwmci_data_transfer()
easier to read and reduce the indentation level of the code.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Extract the clock divider update into dwmci_update_div() function. It's
a procedure recommended in TRM, so it's better to keep it in a dedicated
function to make the code clearer.
While at it also extract the clock control code into a separate routine
to avoid code duplication in dwmci_setup_bus().
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Move FIFO threshold initialization into a separate function to make
dwmci_init() more readable.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Waiting for data busy is a logically separate operation and should be
implemented as a separate routine. Follow Linux kernel example and
extract it from dwmci_send_cmd(). This way it doesn't clutter
dwmci_send_cmd() function, and can be reused later in other cases.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
struct idmac is only used in dw_mmc.c, so move it there from dwmmc.h to
avoid cluttering the interface in the header.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Please pull the updates for rockchip platform:
- Add board support:
RK3566: Radxa ROCK 3 Model C
Radxa ZERO 3W/3E
Xunlong Orange Pi 3B
RK3568J: Radxa ROCK 3B
RK3308B: Radxa ROCK S0
RK3588: Radxa ROCK 5 ITX
FriendlyElec CM3588 NAS board
- dw-mmc: allow 4-bit mode;
- dts and config updates;
CI:
https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/21997
The revision is different for these, add the additional check as in
xhci-dwc3 core_init code.
Equivalent upstream Linux patch:
690fb3718a70 ("usb: dwc3: Support Synopsys USB 3.1 IP")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Back when the TPM subsystem was refactored tpm_tis_wait_init() ended up
being called after tpm_tis_init() which initializes values the former needs.
Since we added more TPM chipsets since then sitting on an i2c bus, this patch
folds in tpm_tis_wait_init into tpm_tis_init and makes sure it's called in the
right order regardless of the bus the TPM sits on.
The TXFIFO register of LPI2C only has one byte length, and if the length
of the data that needs to be read exceeds 256 bytes, it needs to be
written to TXFIFO multiple times.
Signed-off-by: Fedor Ross <fedor.ross@ifm.com>
Instead of using the hard-coded bus speed value I2C_SPEED_STANDARD_RATE,
use the actual configured bus speed. This way the bus speed doesn't
change suddenly after calling the imx_lpi2c_probe_chip() function for
example.
Signed-off-by: Fedor Ross <fedor.ross@ifm.com>
Newer Samsung SoCs (including newer Exynos, ExynosAuto, Google Tensor)
still use these IPs, or slightly newer versions of it.
Make these drivers available on these platforms by guarding
EXYNOS4/EXYNOS5 specific code behind their configs, and using CCF for
clocks on other platforms.
Tested S3C I2C driver on Exynos7885.
This along with extended clock driver should enable S3C I2C on
Exynos850.
Signed-off-by: David Virag <virag.david003@gmail.com>
Tested-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Heiko Schocher <hs@denx.de>
There is no reason to use goto and just call return. Better is to call
return directly which is done for some if/else parts.
Also make no sense to setup ret to -ETIMEDOUT and then to 0.
Return timeout directly.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
There is no reason to have any pointer to GD that's why remove it.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
What model of Radxa ZERO 3W/3E board can be identified using ADC at
runtime, add a Kconfig symbol to allow use of ADC in SPL.
This will be used to identify board model in SPL to allow loading
correct FIT configuration and FDT for U-Boot proper at SPL phase.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Port the RK3308 part of the Rockchip IO Domain driver from linux.
This differs from linux version in that vccio3 iodomain bit is enabled
in the write ops instead of in an init ops as in linux, this way we can
avoid keeping a full state of all supply that have been configured.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Hosts capable of 8-bit can also do 4 bits, fix use of 4-bit mode when
8-bit mode is supported.
This fixes use of 1-bit mode with SD NAND on ROCK Pi S using the DT in
v6.11-rc1 that chage to use 8-bit bus to also support eMMC. With this
4-bit mode is used with SD NAND and 8-bit mode with eMMC, same as in
Linux kernel.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Fix multiplex configuration for PCIe1L0 and PCIe1L1 in PCIESEL_CON for
RK3588 to correctly select between Combo PHYs and PCIe3 PHY.
Currently, the code incorrectly muxes both ports to Combo PHYs,
interfering with PCIe3 PHY settings.
Introduce PHY identifiers to identify the correct Combo PHY and set
the necessary bits accordingly.
This fix is adapted from the upstream Linux commit by Sebastian Reichel:
d16d4002fea6 ("phy: rockchip: naneng-combphy: Fix mux on rk3588")
Fixes: b37260bca1 ("phy: rockchip: naneng-combphy: Use signal from comb PHY on RK3588")
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
UBI block is an virtual device, that runs on top
of the MTD layer. The blocks are UBI volumes.
Intended to be used in combination with other MTD
drivers.
Despite the fact that it, like mtdblock abstraction,
it used with UCLASS_MTD, they can be used together
on the system without conflicting. For example,
using bcb command:
# Trying to load bcb via mtdblock:
$ bcb load mtd 0 mtd_partition_name
# Trying to load bcb via UBI block:
$ bcb load ubi 1 ubi_volume_name
User always must attach UBI layer (for example, using
ubi_part()) before using UBI block device.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
MTD block - abstraction over MTD subsystem, allowing
to read and write in blocks using BLK UCLASS.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
This updates the "old style" DTs to that of Linux v6.10, matching what
OF_UPSTREAM is at now. Hopefully we won't need to do this (manually)
anymore. Since this brings in the DT for a new board (Tanix TX1), also
add the defconfig for that, which has just been waiting for that sync.
There are three more fixes: two for the SPI clock setup, which avoids
too high frequencies in some cases, and one fix to avoid a build warning
with GCC 14 for the sunxi TOC0 part of the mkimage tool.
The gitlab CI passed, and I tested the SPI flash on the OrangePi Zero 3
and also booted that into Linux.
AMD/Xilinx changes for v2024.10-rc2
amd/xilinx:
- Enable CONFIG_MMC_SPEED_MODE_SET
env:
- support overriding spi dev from board code
clk:
- Add set_rate support for display clocks
spi:
- Describe is25lp01gg flash
zynq:
- Add support for 7z010_lr and 7z020_lr
zynqmp:
- Add support for zu1eg_lr
- Enable NFS for Kria
- DT changes
- Cleanup firmware handling in board_init()
versal-net:
- Setup spi seq number based on boot device
- dt-schema update for mini configurations
versal2:
- Disable uartlite driver
- Add support for mini configurations
- Enable NFS
tpm_tis_wait_init() is using the 'chip->timeout_b' field which is
initialized in tpm_tis_init(). However, the init-function is called
*after* tpm_tis_wait_init() introducing an uninitalized field access.
This commit switches both routines.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
[Ilias removed unusged 'chip' definition in tpm_tis_spi_probe()]
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fixes: a5c30c26b2 ("tpm: Use the new API on tpm2 spi driver")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
If the maximum frequency is requested, we still fall into the CDR2
handling. But there the minimal divider is 2. For the sun6i and sun8i we
can do better with the CDR1 setting where the minimal divider is 1:
SPI_CLK = MOD_CLK / 2 ^ cdr with cdr = 0
Thus, handle the div = 1 case specially.
While at it, correct the comment above the calculation.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
The CDR2 divider calculation always yield a frequency greater than the
requested one. Use DIV_ROUND_UP() to keep the frequency equal or below
the requested one. This way, we can also drop the "if div > 0" check
because we know for a fact that div cannot be zero.
FWIW, this aligns the CDR2 calculation with the linux driver.
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Simon Glass <sjg@chromium.org> says:
This series includes fixes to get some rockchip and nvidia boards
working again. It also drops the broken Beaglebone Black config and
provides a devicetree fix for coral (x86).
The code here is confusing due to large blocks which are #ifdefed out.
Add a function phase_sdram_init() which returns whether SDRAM init
should happen in the current phase, using that as needed to control the
code flow.
This increases code size by about 500 bytes in SPL when the cache is on,
since it must call the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present gd->ram_size is 0 in SPL, meaning that it is not possible to
enable the cache. Correct this by always populating the RAM size
correctly.
This increases code size by about 500 bytes in SPL, since it must call
the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
