Agilex7 M-series support has been added using upstream Linux DTS.
socfpga_agilex_socdk-u-boot.dtsi was updated to support both Agilex and
Agilex7 M-series platforms.
Signed-off-by: Tingting Meng <tingting.meng@altera.com>
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
The base address of system manager can be retrieved
using DT framework through the system manager driver.
Enable system manager support for Agilex by probing the
system manager driver to initialize during SPL boot up.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Refactor system manager initialization by searching for system manager
alias in Agilex5 device tree instead of manually passing node name to
the device model calling function
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
The Galaxy R (GT-I9103) and Captivate Glide (SGH-i927) are both Tegra 2
based Samsung smartphones released in 2011. They both feature 1 GB of RAM
and 8 GB of expandable flash memory. The key difference is that the
Captivate Glide has an OLED panel (contrary to LCD in Galaxy R) and a
QWERTY keyboard in form factor of a slider.
Signed-off-by: Ion Agorria <ion@agorria.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Pegatron Chagall (originally built by Pegatron, but later rebranded by
other vendors under names Fujitsu Stylistic M532, Olivetti Olipad 3,
Siragon 4N, Realpad Bunaken, DNS AirTab P110w / P110g etc) is a mostly
business-oriented tablet sold in 2012 in different variants, mostly in
Europe, with slight differences in storage size (16GB/32GB) and presence
of built-in cellular modem.
Tested-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/27236
- Add support for STM32 TIMERS and STM32 PWM on STM32MP25
- Add STM32MP13xx SPL and OpTee-OS start support
- Fix header misuse in stm32 reset drivers
- Fix STMicroelectronics spelling
- Fix clk-stm32h7 wrong macros used in register read
- Fix PRE_CON_BUF_ADDR on STM32MP13
- Fix clock identifier passed to struct scmi_clk_parent_set_in
- Fix stm32 reset for STM32F4/F7 and H7
- Enable OF_UPSTREAM_BUILD_VENDOR for stm32mp13_defconfig
- Add STM32MP23 SoC and stm32mp235f-dk board support
Add default STM32MP13xx debug UART initialization. This is similar
to STM32MP15xx debug UART initialization, except the RCC registers
are at different offsets and the UART pinmux pins are different.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
The STM32MP13xx PMIC initialization for DDR3 DRAM type is similar
to the STM32MP15xx PMIC initialization, except the VTT rail is not
enabled. Fill in the STM32MP13xx support.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Second set of u-boot-at91 features for the 2025.10 cycle:
This feature set includes the addition of new sama7d65 SoC and a new
board named sama7d65-curiosity.
So far developers seem to use three popular boards:
- Avaota A1: dev board with USB 3.0, dual Ethernet, small display
- X96QPro+: TV box with Gigabit Ethernet, USB 3.0, eMMC
- Radxa A5E: small dev board with USB3/M.2 2230 (muxed), dual Ethernet
Add the defconfig files for those boards, containing the DRAM parameters
and the usual Kconfig options.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Add the basic Kconfig options, addresses and other values for the
existing Kconfig settings for the new Allwinner A523/T527/H728 SoC.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Make it possible to update E850-96 firmware binaries using EFI Capsule
Update mechanism. For example, to update the U-Boot binary, the capsule
file can be generated like this:
$ ./tools/mkeficapsule --index 4 \
--guid 629578c3-ffb3-4a89-ac0c-611840727779 \
u-boot.bin capsule4.bin
The resulting 'capsule4.bin' should be copied to ESP partition (in
/boot/efi/EFI/UpdateCapsule/ directory). Then after reboot U-Boot will
update the 'bootloader' area in eMMC Boot Partition A (boot0) and remove
the capsule file, by EFI boot manager executed as a part of Standard
Boot:
Applying capsule capsule4.bin succeeded.
Reboot after firmware update.
The kernel will also expose the ESRT table information via SysFS in
/sys/firmware/efi/esrt/entries.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Add 'dfu_alt_info' environment variable which contains:
- Linux eMMC partitions ('esp' and 'rootfs')
- eMMC Boot Partition A layout, where all the firmware reside
It makes it possible to update the bootloader (U-Boot). All sizes in
'dfu_alt_info' are given in 512B blocks (LBA). eMMC size is 58.2 GiB.
The eMMC Boot Partition A (mmc0boot0) layout looks like this:
boot0 partition (4 MiB)
0x0 +----------------------------------+
| fwbl1 (12 KiB) |
0x18 +----------------------------------+
| epbl (76 KiB) |
0xb0 +----------------------------------+
| bl2 (256 KiB) |
0x2b0 +----------------------------------+
| dram_train (16 KiB) |
0x2d0 +----------------------------------+
| ect_test (50 KiB) |
0x334 +----------------------------------+
| acpm_test (130 KiB) |
0x438 +----------------------------------+
| bootloader (2 MiB) |
0x1438 +----------------------------------+
| el3_mon (256 KiB) |
0x1638 +----------------------------------+
where U-Boot should be flashed into 'bootloader' partition. So U-Boot
binary size should be 2 MiB or less. The whole boot0 partition is 4 MiB,
but only 2.8 MiB is currently used.
With this change, the U-Boot binary can be updated on eMMC like this:
=> dfu 0 mmc 0
$ dfu-util -D u-boot.bin -a bootloader
Looking at E850-96 booting diagram at [1,2], it's easy to see how these
binaries are being executed in the same order they are placed in
mmc0boot0 area. E.g. fwbl1 is definitely BL1 (software part of Boot
ROM). So it's obvious the ROM code just reads the binary from eMMC at
0x0 offset into RAM (SRAM?) and executes it.
All mentioned images can be found at [3], as stated in E850-96 U-Boot
documentation. 'dram_train', 'ect_test' and 'acpm_test' areas should be
ignored -- they are not flashed with real images.
[1] doc/board/samsung/e850-96.rst
[2] https://docs.u-boot.org/en/latest/board/samsung/e850-96.html
[3] https://gitlab.com/Linaro/96boards/e850-96/images/-/tree/master/images
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Setup "serial#" environment variable from the chip ID. The chip ID is
read from Exynos850 SoC OTP (One Time Programmable) memory, which acts
like an EEPROM and contains unique SoC ID. This "serial#" variable is
further used for "fastboot devices" serial number, etc.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/27149
- Add support for the NXP imx93 frdm board.
- imx93_evk and phycore-imx93 cleanups.
- Convert imx6dl-sielaff to OF_UPSTREAM and fix serial download mode boot.
- Fix crash in imx power-domain.
- Migrate Phytec imx8mm boards to standard boot.
- Fix smatch warnings.
Commit 86acdce2ba ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Tested-by: Bryan Brattlof <bb@ti.com>
Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards
uclass_find_next_device always returns 0, so instead make it a void and
update calling sites.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
There is no PMIC and USB related C code in this file.
Remove these unneeded header files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
remove boot logic from shared env file for phyboard-polis and
phygate-tauri.
Adjust configs for both boards as well.
Space at the beginning of addressable RAM is reserved for space used via
standard boot env variables. CONFIG_SYS_LOAD_ADDR is set to the lowest
address behind the standard boot variables reserved space.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Drop unused define for PCA9450 PMIC register which is already part of
the header file <power/pca9450.h> since commit 1d0d257043 ("imx93_evk:
spl: update pmic settings").
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Move the call to configure the qrio i2c deblock pins earlier.
Before this, the call was happening after the first attempt to deblock
the SDP EEPROM, which resulted in a not correct sequence.
Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Upcoming boards will have different ethernet interfaces. So we move this
variable out of the common code.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Setting GPIO by reading the value of the GPRT register, toggling the
correct bit and then writing it causes input values to transfer to the
output. Here's how (example):
1) set gpio 17 and 18 as input.
2) set gpio 17 output value to 0 (read gprt, change 17 to 0, write).
3) set gpio 18 output value to 0 (read gprt, change 18 to 0, write).
The problem here is that because we set 17 as input, and it's a pull-up,
when we read gprt in step 3, the bit 17 will be 1 and not 0.
Instead of doing read/write/modify, the solution is to keep track
internally of the user set GPIOs, and replace the read step with this
static variable.
Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Use new email for community work. Also remove my
capricorn SoM maintainer entry since I do not
have access to this hardware anymore.
Signed-off-by: Anatolij Gustschin <ag.dev.uboot@gmail.com>
While this is interesting and useful for debugging there isn't extremely
useful information so we will only show it if debug is enabled.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Update the ddr phy config values to those created by the mscale_v3.10
tool. The original values were obtained using mscale_v3.10. The v3.10
tool removed ddr phy register values of 0x0.
This has no functional change but makes comparing and patching ddr
configuration easier in addition to slightly shrinking the DRAM config
size.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Add dram support for the MT53E1G32D2FW-046 RevC part which is a single die
32Gbit density part vs RevA/B which were dual-die parts:
- use a previously unused EEPROM byte to denote a variant of the
base config to be patched
- add a dram description string
- return the board struct from eeprom_init and pass it to the
spl_dram_init function so that it has access to the EEPROM
- move ddr_init into the spl_dram_init so that it can be patched
in the per-soc init function
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Add the configuration register for DDRC_ADDRMAP7 which was added in the
RAP spreadsheet v19. This has no functional change but allows DRAM
configuration to be patched in a later commit.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Enable standard boot for the phycore-imx8mp and use it as default. Add
all variables required for standard boot to the environment.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Tested-by: Martin Schwan <m.schwan@phytec.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The loop in the icicle implementation of board_fit_config_name_match()
runs strtok() to split off the vendor portion of the compatible string
using , as the delimiter. strtok() modifies a string in place, so where
the first config and compatible do not match, the compatible has been
modified by the time the loop hits the second iteration.
Since stringlists in dt land are null separated strings, the nulls
strtok() inserts to replace the delimiter increase the number of strings
in the compatible list. When the second iteration of the loop calls
fdt_stringlist_get(), it gets the vendorless portion of the first
compatible string, rather than the second compatible string. Copy each
compatible before calling strtok() to avoid this problem.
The temporary string the compatible is copied to is statically
allocated, as attempts to dynamically allocate it at this stage of boot
were met with "alloc space exhausted" errors.
Fixes: 7c16ebba1e ("board: mpfs_icicle: implement board_fdt_blob_setup()/board_fit_config_name_match()")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable the D-cache, which will also enable the MMU. The latter
make sure we don't do unaligned access on Strongly-ordered memory,
which has UNPREDICTABLE behaviour according the architecture
definition. This fixes using U-Boot with recent versions of
QEMU's vexpress-ca9 emulation.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
This symbol is not something that the user should be enabling or
disabling but rather the developer for a particular board should select
it when required.
This is mostly size neutral, however a few places do have changes. In
the case of i.MX6ULL systems, it is always the case that
arch_misc_init() could call setup_serial_number() and do useful work,
but was not enabled widely, but now is. In the case of i.MX23/28
systems, we should be able to call mx28_fixup_vt() again here, so do so.
Finally, some platforms were calling arch_misc_init() and then not doing
anything and this results in removing the option.
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
The hook arch_misc_init was not intended to be used for per-board hooks.
This can be done with misc_init_r instead, which is what follows
immediately after arch_misc_init. Switch a few platforms.
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Move to using the latest generated RM YAML configuration files generated
by the K3 Resource Partitioning Tool which updates them to have standard
formatting with respect to indentation.
These files were generated from the untagged commit 41718bd5f915 ("docs: Update
docs and move them to docs folder") of the K3 Resource Partitioning tool. This
tool is packaged as a part of the public SDK and is not otherwise
publicly available.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Add r7s72100 Genmai board support. Serial console, NOR Flash and
Ethernet are known to work however on-board SDRAM is not yet enabled.
Signed-off-by: Magnus Damm <damm@opensource.se>
Break out SoC specific code from the GR-Peach board and put it into the
board/renesas/common directory so it can be easily shared between the
GR-Peach and Genmai boards.
Signed-off-by: Magnus Damm <damm@opensource.se>
