Support for eMMC, SD card, GPIO and SPL have been available in LPi4A
port. Update the documentation of support status and build
instructions.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Adjust Kconfig and defconfig and add SPL initialization code for
Lichee Pi 4A. Then enable SPL support which we've added for TH1520 SoC
earlier. The board devicetree is changed to use TH1520 binman
configuration to generate bootable images.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add binman configuration for TH1520 SoC, whose BROM loads the image
combined into SRAM and directly jumps to it. The configuration creates
u-boot-with-spl.bin where the SPL code locates at the start and the DDR
firmware is shipped.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Describe DRAM controller integrated in TH1520 SoC and preserve it in SPL
devicetree blob.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Memory node is necessary for TH1520 SPL to configure size and base
address of DRAM. Let's preserve it in SPL devicetree blob.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
SPL for TH1520 requires CPU and boot UART nodes to function. Preserve
them in SPL devicetree blob with bootph-pre-ram property.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This patch cleans the vendor code of DDR initialization up, converts the
driver to fit in DM framework and use a firmware[1] packaged by binman to
ship PHY configuration.
Currently the driver is only capable of initializing the controller to
work with dual-rank 3733MHz LPDDR4, which is shipped by 16GiB variants
of LicheePi 4A boards and I could test with. Support for other
configurations could be easily added later.
Link: https://github.com/ziyao233/th1520-firmware # [1]
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Introduce the SoC-specific code and corresponding Kconfig entries for
TH1520 SoC. Following features are implemented for TH1520,
- Cache enable/disable through customized CSR
- Invalidation of customized PMP entries
- DRAM driver probing for SPL
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The BROM of TH1520 always initializes UART0's parent clock and
configures the baudrate to 115200. Describe the clock frequency to make
UART function correctly in SPL without introducing CCF.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Designed before a standard set of cache management operations defined in
RISC-V, earlier T-Head cores like C906 and C910 provide CMO through the
customized extension XTheadCMO, which has been used in the CV1800B port
of U-Boot.
This patch splits XTheadCMO-related code into a generic module, allowing
SoCs shipping T-Head cores to share the code.
Link: https://github.com/XUANTIE-RV/thead-extension-spec
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
JH7110 drivers are missing support for CPU frequency scaling, so override
upstream device-tree to use default clock rates for syscrg. This override
duplicates a portion of jh7110-common-u-boot.dtsi file planned for removal.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Liang <ycliang@andestech.com>
- use upstream alias name for cpu and timer nodes
- remove bootph-pre-ram hint from parent nodes
- drop S7 cpu core "okay" status
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Move unnecessary clock frequency assignment out of device-tree and into the
board config header so that the ns16550 serial driver can successfully init
during SPL after failing to resolve the parent clock from upstream dts. The
serial driver will then resolve clock frequency from device-tree node parent
clock at init during Main app as it is expected by upstream.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Fix the erroneous header guard for insn-def.h to reflect the correct
header name.
Fixes: bfc8ca3f7f ("riscv: Add support for defining instructions")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Similar to AArch64's case, Clang may wrongly fold accesses to gd pointer
which is defined with register qualifier into constants, breaking
various components.
This patch defines gd as a macro when building with Clang or LTO, which
expands to get_gd() that accesses gp pointer in assembly, making RISC-V
ports function properly and preparing for introduction of LTO in the
future. Board initialization code is also adapted for non-assignable gd.
Reported-by: Nathaniel Hourt <I@nathaniel.land>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Drop filename property for proper U-Boot entry since binman takes
"u-boot-nodtb.bin" as the default filename for u-boot-nodtb entries.
This follows efe9c12322 ("riscv: dts: binman.dtsi: Switch to
u-boot-nodtb entry for proper U-Boot") to clean binman.dtsi up.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Unlike ARM and X86, booting 32-bit images on 64-bit CPUs is currently
not supported for Risc-V. Hence, for bootm, disallow booting a FIT
or a legacy image that was built for an arch type which is different
than the current arch and for booti, set the arch type to be the
same as the current arch.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Select between the 32-bit or 64-bit arch type for the image headers
depending on how the build is configured.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Similar to ARM and X86, introduce a new image type which allows u-boot
to distinguish between images built for 32-bit vs 64-bit Risc-V CPUs.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Maxim Moskalets <maximmosk4@gmail.com>
That's how it looks like without CONFIG_MMC_SUPPORTS_TUNING before the
patch:
aarch64-buildroot-linux-gnu-ld.bfd: drivers/mmc/cv1800b_sdhci.o: in function `cv1800b_execute_tuning':
drivers/mmc/cv1800b_sdhci.c:47:(.text.cv1800b_execute_tuning+0x50): undefined reference to `mmc_send_tuning'
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
When there is no reply from the TFTP server, do_tftpb() should
eventually time out. Add a 10 second timer for that purpose.
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Functions called from EFI applications should not do console output.
Refactor the wget code to implement this requirement. The wget_http_info
struct is used to hold the boolean that signifies whether the output is
allowed or not.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
wget_do_request() currently does so little before calling the static
function wget_loop() that we may as well rename wget_loop() to
wget_do_request() and put everything in one function.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Pull request efi-2025-07-rc3-2
Documentation:
* Add test/py/requirements.txt to documentation
* Use globing for selecting pytest files
UEFI:
* Provide a function to disable ANSI output during tests
Other:
* test: allow multiple config options in buildconfigspec
* test: allow testing with NET_LWIP=y
In some cases we have alternative configuration options that supply the
same functionality, e.g CONFIG_NET and CONFIG_NET_LWIP.
Allow to specify all of them as arguments for buildconfigspec() and execute
the text if any of these is fulfilled, e.g.
@pytest.mark.buildconfigspec('net', 'net_lwip')
Update the documentation.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
After the original series was merged, Quentin noted that we could handle
adding additional tests more easily by using the glob feature. Do so.
Suggested-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
As noted by Quentin, in CI we should be at least versioning the pytest
that we install. To avoid problems later, go with the whole requirements
file being used. Furthermore, our documentation building for readthedocs
must also have pytest so install the requirements file there as well.
Reported-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
We don't want ANSI escape-sequences written in tests since it is a pain
to check the output with ut_assert_nextline() et al.
Provide a way to tests to request that these characters not be sent.
Add a proper function comment while we are here, to encourage others.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Now that cyclic_unregister() is safe to call on a not-registered
cyclic_info, we can make cyclic_register() behave like the mod_timer()
and hrtimer_start() APIs in linux, in that they don't distinguish
between whether the timer was already enabled or not; from the point
of the call it is, with whatever timeout/period is set in that most
recent call.
This avoids users of the cyclic API from separately keeping track of
whether their callback is already registered or not, and even if they
know it is, can be used for changing the period (and/or the callback
function) without first doing unregister().
See also this recent'ish message from kernel maintainer Thomas
Gleixner on that API design for timer frameworks:
https://lore.kernel.org/lkml/87ikn6sibi.ffs@tglx/
First of all the question is whether add() and mod() are really
valuable distinctions. I'm not convinced at all. Back then, when we
introduced hrtimers, we came to the conclusion that hrtimer_start()
is sufficient.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Make cyclic_unregister() safe to call with an already unregistered, or
possibly never registered, struct cyclic_info. This is similar to how
the various timer APIs in the linux kernel work (they all allow
calling delete/cancel/... on an inactive timer object).
This means callers don't have to separately keep track of whether
their cyclic callback is registered or not, and avoids them trying to
peek into the struct cyclic_info for that information - which leads to
somewhat ugly code as it would have to be guarded by ifdef
CONFIG_CYCLIC.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
Commit f6eff35b8c ("cmd: tlv_eeprom: handle -ENODEV error from
read_eeprom function") removed the needed 'return 0' after a successful
read. As a result, the usage message is shown when 'tlv_eeprom read' is
successfully called.
Let's fix it by adding the needed 'return 0'.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Enable DM_SERIAL for Marvell Kirkwood boards that have not been converted.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
This device has a hardware random number generator. Linux can
use this feature to randomize the location of the kernel in
memory for better security. However, that functionality is only
available if the bootloader firmware provides it. Enable support
for it in the default configuration for this device.
Signed-off-by: Benjamin Schneider <ben@bens.haus>
Reviewed-by: Stefan Roese <sr@denx.de>
Linux changed the behaviour of strim() so that a string with only spaces
reduces places the terminator at the start of the string, rather than
returning a pointer to the end of the string.
Bring in this version, from Linux v6.14
Add a comment about the new behaviour.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that all of the cases of code that relied on <command.h> to provide
<env.h> (or one of the headers that it includes, and so forth) have been
fixed, we can drop the include from here.
Signed-off-by: Tom Rini <trini@konsulko.com>
These files require <compiler.h> in order to have MEM_SUPPORT_64BIT_DATA
be defined but currently rely on a long indirect include path to get it.
Add this directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
