An integer overflow in gdsize_total calculation could lead
to under-allocation and heap buffer overflow.
Signed-off-by: Timo tp Preißl <t.preissl@proton.me>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
An integer overflow in nvlist size calculation could lead
to under-allocation and heap buffer overflow.
Signed-off-by: Timo tp Preißl <t.preissl@proton.me>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
An integer overflow in size calculations could lead to
under-allocation and potential heap buffer overflow.
Signed-off-by: Timo tp Preißl <t.preissl@proton.me>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Remove the empty include/configs/mt8365.h header file as it is not
needed. The Kconfig entry that referenced it is also removed.
Signed-off-by: David Lechner <dlechner@baylibre.com>
u-boot-dfu-20260116
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/29018
Android:
* Fix missing dependency for BOOTMETH_ANDROID
* Add bootconfig support
* Add 'get ramdisk' command to abootimg
DFU:
* Improve error handling in dfu_fill_entity()
USB Gadget:
* ci_udc: Ensure ci_ep->desc is valid before using it
* ci_udc: Add additional debug prints
Markus Schneider-Pargmann (TI.com) <msp@baylibre.com> says:
This series adds the capability to define hardcoded panel settings to
the simple_panel driver similar to the Linux Kernel and adds the panel
used on am335x evm. panel-uclass.c is extended to support get_modes()
for panels and drm_display_mode conversion. In a second step the tilcdc
is extended to support OF graph to be able to connect to the simple
panel devicetree node.
Link: https://lore.kernel.org/r/20260105-topic-am33-evm-lcd-v2026-01-v4-0-7617591b8159@baylibre.com
When SPL_NET is included, scripts/Makefile.xpl includes net/. However,
in this directory, the Makefile only compiles things if CONFIG_NET or
CONFIG_NET_LWIP is defined (it doesn't use $(PHASE_)). Therefore, at
least one networking stack needs to be enabled for SPL_NET=y to do
anything meaningful.
In certain cases (e.g. am62px_evm_r5_ethboot_defconfig + NO_NET=y via
menuconfig), it is possible to fail the build with undefined references
(since include/net-common.h does check with CONFIG_IS_ENABLED(NET) which
would be true for SPL_NET, but the implementation wouldn't be compiled).
Fix this oversight by making sure a network stack (and the legacy one)
is available when selecting SPL_NET.
Fixes: 8cb330355b ("net: introduce alternative implementation as net/lwip/")
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Remove empty gpio.h header file and CONFIG_GPIO_EXTRA_HEADER on
ARCH_MEDIATEK. There is no reason to have these since the header
doesn't contain anything.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
When booting from SPI, the ROM code does not initialize the MMC
controller on AN7581. As a result, the first MMC initialization
is performed by U-Boot.
In this case, the r_smpl bit is left uninitialized, which may
cause incorrect sampling timing during early MMC access.
Set the r_smpl bit explicitly in the U-Boot device tree to ensure
reliable MMC initialization.
This change is limited to the U-Boot-specific device tree.
The Linux MMC driver already performs runtime delay detection
and does not require a fixed r_smpl setting.
Signed-off-by: Ray Liu <ray.xy.liu@gmail.com>
Add support for OF graph parsing. When using OF graph the default
tilcdc_panel_info is used which is the same as defined in Linux.
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Add timing data for tfc_s9700rtwv43tr_01b from Linux to the simple-panel
driver. To support hardcoded timing data as Linux does, add a new struct
simple_panel_drv_data which holds a struct display_timing pointer as
well. The hardcoded timing data is preferred over DT parsing.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Linux uses get_modes() to fetch all available panel modes from the
driver. This is also used to fetch the modes from Linux's simple panel
implementation where a list of drm_display_mode structs is used to
define the different possible panels.
To make our work easier, create a compatible way of fetching and
defining these modes in u-boot. get_modes() fetches the available modes
from the panel driver. The get_display_timing() call maps the
drm_display_mode properties to the display_timing struct. This call now
uses whatever panel operation is available, get_display_timing() or
get_modes().
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Add test to verify that androidboot.* parameters are correctly extracted
from bootargs and appended to the bootconfig section when using
'abootimg get ramdisk' with boot image v4 and vendor_boot image.
The test verifies:
- androidboot.* parameters are removed from bootargs
- They are appended to the bootconfig section in the ramdisk
- Non-androidboot parameters remain in bootargs
- The bootconfig trailer is properly updated
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Guillaume La Roque (TI.com) <glaroque@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260112-bootconfig-v5-5-79b242159ac7@baylibre.com
[mkorpershoek: dropped whitespace changes from original patch]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
The micrel KSZ9031 phy has a optional clock pin (CLK125_NDO) which can be
used as reference clock for the MAC unit. The clock signal must meet the
RGMII requirements to ensure the correct data transmission between the
MAC and the PHY. The KSZ9031 phy does not fulfill the duty cycle
requirement if the phy is configured as slave. For a complete
describtion look at the errata sheets: DS80000691D or DS80000692D.
The errata sheet recommends to force the phy into master mode whenever
there is a 1000Base-T link-up as work around. Only set the
"micrel,force-master" property if you use the phy reference clock provided
by CLK125_NDO pin as MAC reference clock in your application.
Attention: this workaround is only usable if the link partner can
be configured to slave mode for 1000Base-T.
This follows linux implementation in commit
e1b505a60366 ("net: phy: micrel: add 125MHz reference clock workaround")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Disable the support due to chip errata and call genphy_config_aneg
instead of genphy_config. For a complete describtion look at the
KSZ9031 errata sheets: DS80000691D or DS80000692D.
Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause.
This patch apply the same workaround as the one for KSZ9031.
This follows linux implementation in commits
3aed3e2a143c ("net: phy: micrel: add Asym Pause workaround")
407d8098cb1a ("net: phy: micrel: add Asym Pause workaround for KSZ9021")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Replace PHY interface mode bitmap handling with comparison test to match
U-Boot PHY subsystem behavior. U-Boot currently implements only single PHY
interface mode for each PHY. Linux currently uses bitmap of PHY interface
modes for each PHY.
The reason why in Linux uses bitmap of supported interface modes is so
that Linux can select the best serdes mode switching behavior for the PHY.
For example if the host only supports 10gbase-r serdes mode, then the PHY
must always talk to the host in 10gbase-r mode, even if the RJ-45 copper
speed was autonegotiated to lower speed (i.e. 1Gbps).
If the host supports both 10gbase-r and sgmii serdes modes, we want the
PHY to switch to sgmii if the RJ-45 speed is 1000/100/10, and to switch
to 10gbase-r if the RJ-45 speed is 10000.
U-Boot does not implement this functionality yet, therefore remove modes
which cannot be currently supported and switch mv_test_bit() to plain
mode comparison.
Fixes: b6fcab0728 ("net: phy: marvell10g: Adapt Marvell 10G PHY driver from Linux")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The usage of the net sub-system was missing the complete command for “net
stats”.
Signed-off-by: Link Mauve <linkmauve@linkmauve.fr>
Reviewed-by: Jerome Forissier <jerome@forissier.org>
Add Microsemi/Microchip MDIO driver for interfaces found in their network
switches.
Driver is based on the Linux version.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Jerome Forissier <jerome@forissier.org>
Given how the support for CONFIG_CMD_TFTPPUT is woven through the
support for the tftp protocol we currently end up including "put"
support in xPL phases, if enabled. This in turn can lead to size
overflow on those platforms as xPL tends to be constrained. To resolve
this, use "CMD_TFTPPUT" in the code to check for both CONFIG_CMD_TFTPPUT
being true and not being in an xPL build phase.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jerome Forissier <jerome@forissier.org>
After the preparatory patches moved most of the NFS code into common
files we now add the code to enable NFS support with lwIP.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Make some variables available to be used by either the legacy network
code or lwIP by moving them into the net-common files. This also allowed
removing a small number of duplicated variables from the lwIP code.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Move the net_state variable into common code so that it can be used by
either the legacy network code or lwIP. This is needed for porting
across the NFS support code for use with lwIP.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
When debugging the LWIP NFS implementation this debug line helped to
show the cause of an error. This could be useful to someone in the
future.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
This patch is not as E Shattow authored it, but contains non-trivial
changes from Heinrich Schuchardt as well. The original author has
requested that this commit be reverted until the changes can be
committed showing which parts were authored by E Shattow and which by
Heinrich Schuchardt.
This reverts commit 4c105d2ae7.
Signed-off-by: Tom Rini <trini@konsulko.com>
Make crypt_compare() accessible from board-specific code
by removing its dependency on the autoboot feature.
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Reviewed-by: Tom Rini <trini@konsulko.com>
The "fixed-layout" nvmem controller subnode used to be optional wrapper
around nvmem controller cells subnodes. The "fixed-layout" node is now
mandatory in most cases, but in order to support both recent and legacy
DTs, both variants have to be supported.
Implement support for the "fixed-layout" node in the most trivial manner,
check whether the nvmem cell supernode is compatible with "fixed-layout"
and if it is, proceed one level above it to find the nvmem controller.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Peripheral registers on MPC83xx-series chips are declared in
immap_83xx.h as a set of structs that ultimately fill the entire MMIO
space of 1 MiB. This patch introduces a compile-time check of the size
of each peripheral struct. The purpose of these checks is two-fold:
1. To quickly tell readers of the code the total size of each struct
2. To verify that the size does not change when a struct is edited
If the size of a peripheral struct were to change by a few bytes due
to an editing error, the result would be mayhem for all following
peripherals, because all offsets would shift by the amount of the error.
All new checks have been compile-tested.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
This platform is unfortunately frequently very close to the binary
size limit. Currently it is so close that generic bug fixes can trigger
build failure. Remove the license command from the image as that frees
up nearly 7KiB of space.
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
The AM571x SoC has 1 GB DDR space. As part of normal re-location process
U-Boot copies itself to the top of DDR bank. However, on HS devices, the
top 37 MB is used by PPA and is firewalled. This results in an exception
and the boot fails. Set CONFIG_SYS_MEM_TOP_HIDE to reserve the top 38 MB
memory (aligned to 2MB as per page size for ARM32) to fix the boot.
Note: This limitation does not exist for other AM57x devices, but this
config is applied in the common defconfig since adding a separate
defconfig only for AM571x is not justified. Losing 38MB of memory at the
bootloader stage on other devices is acceptable.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Add a requirements.txt file to the pylibfdt script directory to specify
setuptools as a dependency. This follows the pattern of each tool in
U-Boot having its own requirements.txt file. The version is set to
78.1.1 to avoid conflict with the same in tools/patman/requirements.txt.
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org> # sandbox
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Add a paragraph explaining that in addition to the requirements.txt
for test/py/test.py itself, users may need to install additional python
packages depending on the U-Boot configuration being built.
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org> # sandbox
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Set ubconfig to None and add a check in the show_timings() function of
test/py/test.py to ensure that the global ubconfig variable was actually
initialized before access attributes.
If tests fail early, e.g. because --build failed, ubconfig may not have
been initialized yet and results in an exception in an atexit handler.
Adding this check avoids unnecessary noise in the output.
Exception ignored in atexit callback: <function cleanup at 0x7de475ea6b60>
Traceback (most recent call last):
File "u-boot/test/py/conftest.py", line 669, in cleanup
show_timings()
File "u-boot/test/py/conftest.py", line 616, in show_timings
if ubconfig.timing:
^^^^^^^^
NameError: name 'ubconfig' is not defined
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org> # sandbox
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
David Lechner <dlechner@baylibre.com> says:
MT8365 has different pinctrl register layout compared to other SoCs in
the family, so needs its own driver.
This is also the first SoC in this family supported in U-Boot using an
upstream devicetree that has the mediatek,pctl-regmap property, so we
need to add support for that to the common mediatek pinctrl code first.
Link: https://lore.kernel.org/r/20260106-pinctl-mtk-mt8365-v1-0-0ca3eb382468@baylibre.com
