Mirrors/u-boot
1
0
Fork 0
mirror of https://source.denx.de/u-boot/u-boot.git synced 2026-06-13 15:03:58 +03:00
Code Issues Packages Projects Releases Wiki Activity
83,654 Commits 10 Branches 527 Tags
b86b135fc67e3b726d69c6f5fe92139e5a2d7a01
Commit Graph

83654 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Michal Simek
b86b135fc6 xilinx: board: Use ETH_ALEN macro for mac address size 
Use predefined macro for eth_mac legacy format.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/382d4bff370894164fad3c30ac0400b25142b544.1674573561.git.michal.simek@amd.com
 2023-01-27 08:48:32 +01:00
Stefan Roese
a33ad8051e net: zynq_gem: Wait for SGMII PCS link in zynq_gem_init() 
In our system using ZynqMP with an external SGMII PHY it's necessary
to wait for the PCS link and auto negotiation to finish before the xfer
starts. Otherwise the first packet(s) might get dropped, resulting in a
delay at the start of the ethernet transfers.

This is only done when the PHY link is already up, which is done in
phy_startup(). As waiting for the PHY link bits via pcsstatus does not
make much sense, when the link is not available in general (e.g. no
cable connected).

This patch adds the necessary code including a minimal delay of 1 ms
which fixes problems of dropped first packages.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Katakam Harini <harini.katakam@amd.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20230125070908.1343256-1-sr@denx.de
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-27 08:47:37 +01:00
Algapally Santosh Sagar
b387c25824 drivers: mmc: Change datatype of tuning_loop_counter to int 
tuning_loop_counter is of char type, which is not capable of handling
the entire data range of this variable. This is pointed by below sparse
warning. Change datatype to int to fix this.
warning: comparison is always false due to limited range of data type.

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230120053617.32463-5-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-27 08:42:47 +01:00
Algapally Santosh Sagar
1d15612b99 xilinx: versal: Add missing header 
Add missing prototype to fix the sparse warning, warning: no
previous prototype for 'do_go_exec' [-Wmissing-prototypes].

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230120053617.32463-4-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-27 08:42:47 +01:00
Algapally Santosh Sagar
508e1aa58c gpio: zynqmp: Handle error from get_gpio_modepin 
There is a unused variable ret, due to which we are getting sparse warning
as below.
warning: variable 'ret' set but not used [-Wunused-but-set-variable].

Return ret incase of error.

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230120053617.32463-3-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-27 08:42:47 +01:00
Algapally Santosh Sagar
fb737f1ed8 xilinx: common: Include header file to fix warning 
Prototype is missing for board_get_usable_ram_top, which is pointed by
below sparse warning. Include init.h header file to fix this.

warning: no previous prototype for 'board_get_usable_ram_top'
[-Wmissing-prototypes].

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230120053617.32463-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-27 08:42:47 +01:00
Michal Simek
cd04c95926 arm64: versal-net: Enable remaking ELF from bin 
U-Boot is composing u-boot.bin from u-boot-nodtb.bin with appended
dts/dt.dtb. It means U-Boot doesn't have DTB inside. When REMAKE_ELF is
enabled make will also create u-boot.elf which is recreated from
u-boot.bin. Below is build output for mini configuration how ELF is
recreated.

cat arch/arm/dts/versal-net-mini.dtb > dts/dt.dtb
cat u-boot-nodtb.bin dts/dt.dtb > u-boot-dtb.bin
cp dts/dt.dtb u-boot.dtb
cp u-boot-dtb.bin u-boot.bin
aarch64-linux-gnu-objcopy -I binary -B aarch64 -O elf64-littleaarch64
 u-boot.bin u-boot-elf.o
aarch64-linux-gnu-ld.bfd u-boot-elf.o -o u-boot.elf -EL -T u-boot-elf.lds
 --defsym="_start"=0xBBF00000 -Ttext=0xBBF00000

It is useful to have u-boot.elf present because Xilinx XSDB debugger can
load ELF file and user doesn't need to specify loading address for
u-boot.bin.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ca550c5c4bf908e757a49a83fdfab0e7100de45e.1674121617.git.michal.simek@amd.com
 2023-01-27 08:41:32 +01:00
Ovidiu Panait
2ec3609d10 microblaze: spl: disable falcon mode by default 
Drop falcon mode configs from microblaze-generic_defconfig, so that a
defconfig build will still boot into u-boot proper.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20230125164157.1638680-3-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-27 08:38:34 +01:00
Ovidiu Panait
8e2378e559 microblaze: spl: drop boot_linux 
Drop boot_linux variable as it is not assigned anywhere. Now that there is
no variable controlling linux boot in spl_start_uboot(), make this
function always return false when falcon mode is enabled.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20230125164157.1638680-2-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-27 08:38:34 +01:00
Ovidiu Panait
4dd5a9fcb5 microblaze: spl: wrap spl_start_uboot() in SPL_OS_BOOT ifdefs 
Make spl_start_uboot() available only if CONFIG_SPL_OS_BOOT is enabled,
since it is only used for falcon mode.

Signed-off-by: Ovidiu Panait <ovpanait@gmail.com>
Link: https://lore.kernel.org/r/20230125164157.1638680-1-ovpanait@gmail.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-27 08:38:34 +01:00
Michal Simek
2fe2be2d27 arm64: zynqmp: Add support for Kria K24 SOM 
SOM itself from PS point of view is using the same configuration as K26
that's why reuse that files and only change compatible strings.

The reason for creating own set of files is just in case when versions
start to diverge because of HW change, supply chain issue, etc.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/61f877ec0b480c5bd368a1211fc73ff7465016bd.1674043915.git.michal.simek@amd.com
 2023-01-24 13:59:33 +01:00
Michal Simek
8489b6d2e3 arm64: zynqmp: Fill model name for SOM CCs 
When U-Boot do DTB reselection origin model for SOM is used and from log it
is not visible if DTB was switched or not. That's why add model directly to
CC (carrier card) to show new model if reselection was successful.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/49ba1007218496c48d287454e84a5b8c08abc692.1674043452.git.michal.simek@amd.com
 2023-01-24 13:58:49 +01:00
Michal Simek
00ce57e4b9 arm64: versal: Remove xilinx_versal_mini_qspi.h configs 
The commit eaf6ea6a1d ("Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using
system-constants.h") moved custom init stack pointer address to Kconfig
which ends up in situation that xilinx_versal_mini_qspi.h is not
needed anymore. That's why remove the file and move defconfigs directly to
xilinx_versal_mini.h configuration.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2d7276ab8d4cb1d245b64287fb59c79325513f22.1674041200.git.michal.simek@amd.com
 2023-01-24 13:58:14 +01:00
Michal Simek
36c9f4ad12 arm64: zynqmp: Remove xilinx_zynqmp_mini_emmc/qspi.h configs 
The commit eaf6ea6a1d ("Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using
system-constants.h") moved custom init stack pointer address to Kconfig
which ends up in situation that xilinx_zynqmp_mini_emmc/qspi.h are not
needed anymore. That's why remove files and move defconfigs directly to
xilinx_zynqmp_mini.h configuration.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/61ae40cf63aabd08adb386c870d3392b0b606fc9.1674040373.git.michal.simek@amd.com
 2023-01-24 13:57:39 +01:00
Michal Simek
988b3fa08d soc: zynqmp: Fix IDcode for xck24 
ID code was added by commit ddf8deabc3 ("arm64: zynqmp: Add support for
SVD devices") based on documentation but after receiving part new ID code
came up. That's why fix IDcode to match xck24 module.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7b39aeeec211458ba4132a10beb7ad295eedb87f.1674030324.git.michal.simek@amd.com
 2023-01-24 13:55:05 +01:00
Michal Simek
8174cd2116 xilinx: common: Add support for partial string match in board_fit_config_name_match() 
Board name in FIT image can use U-Boot regular expressions SLRE to instruct
U-Boot to handle all revisions for certain board.
For example when name (description property) is saying "zynqmp-zcu104-revA"
only description with this name is selected.
When zynqmp-zcu104.* is described then all board revisions will be handled
by this fragment.
Xilinx normally have some board revisions which are SW compatible to each
other. That's why make sense to define board name with revisions first
follow by generic description with '.*' at the end like this:

config_1 {
        description = "zynqmp-zcu104-rev[AB]";
        fdt = "zynqmp-zcu104-revA";
};
config_2 {
        description = "zynqmp-zcu104.*";
        fdt = "zynqmp-zcu104-revC";
};

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d67683a3c5d0435a5070e622f7a9a38e19c64cf5.1672994329.git.michal.simek@amd.com
 2023-01-18 12:17:47 +01:00
Ashok Reddy Soma
724379d9af xilinx: versal-net: Add support for timer and start it 
Add support for starting timer by setting up time stamp generator
registers. This is done only for EL3 i.e. mini U-Boot case.
For other cases, it will be done TF-A.

Add COUNTER_FREQUENCY and IOU_SWITCH_DIVISOR0 to Kconfig so that they
can be tuned as required.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/fcd8b0dc4b45a11f5e753afff42f84738ac813da.1673336645.git.michal.simek@amd.com
 2023-01-16 15:34:37 +01:00
Jay Buddhabhatti
29b58bba91 clk: versal: Return error in case if clock setup failed 
Currently probe is getting success even if clock setup is failed
because of that u-boot is trying to access invalid clocks. So return
error if clock setup failed.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/fa78e71211e5f68f8dc1353b357f96e6283f65a8.1673335422.git.michal.simek@amd.com
 2023-01-16 15:33:58 +01:00
Michal Simek
2732035da9 board: presidio-asic: Remove CONFIG_TARGET_VENUS 
Symbol is not defined anywhere that's why remove it.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e34404488b2b46cbb2a10c1663e809ff34287a66.1671463617.git.michal.simek@amd.com
 2023-01-11 15:18:08 +01:00
Neal Frager
537ca0bee6 makefile: add multi_dtb_fit dep 
With certain gcc compilers, the u-boot.itb is built immediately after dtb
generation.  If CONFIG_MULTI_DTB_FIT is used, it is possible that the
fit-dtb.blob is not finished in time.

This patch adds a necessary dependency to guarantee that the fit-dtb.blob
is built before attempting to build the u-boot.itb.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20221221075446.47141-1-neal.frager@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-11 15:18:08 +01:00
Luca Ceresoli
66b39c1a8c arm64: zynqmp: remove Avnet UltraZed-EV Starter Kit 
Nobody seems interested and able to keep this board supported, and
xilinx_zynqmp_virt_defconfig is supposed to be enough for any zynqmp board.

See the discussion at: https://lore.kernel.org/u-boot/CAPnjgZ3hHbyiFf=_Lp-Wz_XOWBkV-3vK4Q3xp=7bcERw-spNpA@mail.gmail.com/T/#m76d726f1ab3f7074c8105c9a2af2110ac7d18708

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20230111082554.1930782-1-luca.ceresoli@bootlin.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-11 10:43:39 +01:00
Victor Lim
3800958a6f xilinx: versal: enable gigadevice 
enabling gigadevice in the related files

Signed-off-by: Victor Lim <vlim@gigadevice.com>
Link: https://lore.kernel.org/r/20230109234946.14540-5-vlim@gigadevice.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-10 12:37:02 +01:00
Victor Lim
be44bf6305 arm64: zynqmp: enable gigadevice 
enabling gigadevice in the related files

Signed-off-by: Victor Lim <vlim@gigadevice.com>
Link: https://lore.kernel.org/r/20230109234946.14540-4-vlim@gigadevice.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-10 12:37:02 +01:00
Victor Lim
a2478acdbc configs: zynq: enable gigadevice 
enabling gigadevice in the related files

Signed-off-by: Victor Lim <vlim@gigadevice.com>
Link: https://lore.kernel.org/r/20230109234946.14540-3-vlim@gigadevice.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-10 12:37:02 +01:00
Victor Lim
e72023c490 mtd: spi-nor-ids: add gigadevice part # 
adding gigadevice part numbers

Signed-off-by: Victor Lim <vlim@gigadevice.com>
Link: https://lore.kernel.org/r/20230109234946.14540-2-vlim@gigadevice.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
 2023-01-10 12:37:02 +01:00
Michal Simek
67ac851488 arm64: zynqmp: Remove unused snps,refclk_fladj property 
The commit c55ac51a55 ("usb: dwc3: Program GFLADJ") hopefully fixed
issues around fladj logic. This DT property was used in Xilinx stack only
that's why remove because it is not needed anymore.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/9bdbd1156b19e28cdebeca29149268b0579a8b6a.1670855257.git.michal.simek@amd.com
 2023-01-10 08:15:54 +01:00
Harini Katakam
fd5f2718d3 arm64: zynqmp: Enable TI phy reset via GPIO 
Add DT property to support reset of TI PHY connected to GEM.
This is present in RevA DT but needs to be extended RevB/1.0/1.1
versions which are built on top.

Fixes: 2b1db7b18c ("arm64: zynqmp: Wire GEM reset gpio")
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7b093616ddea269043cbbb1e3806644d5a4b23be.1670854455.git.michal.simek@amd.com
 2023-01-10 08:15:54 +01:00
Harini Katakam
4664a63cc7 arm64: zynqmp: Describe TI phy as ethernet phy ID on ZCU102 RevB & up 
TI phy requires a reset before PHY address detection to make sure
correct strapping via MIO is detected. Facilitate the same using
ethernet-phy-id compatible string. GPIO reset entry will be added in
a separate commit.
This support is present in RevA but needs to be extended to RevB/1.0/1.1
versions which are built on top.

Fixes: 13622c7a9d ("arm64: zynqmp: Describe TI phy as ethernet-phy-id")
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6d500a83a787316353d4b26c75d1b51d29e3730e.1670854455.git.michal.simek@amd.com
 2023-01-10 08:15:54 +01:00
Michal Simek
ef440787da arm64: zynqmp: Remove unused USB DT properties 
xlnx,usb-polarity, xlnx,usb-reset-mode and snps,mask_phy_reset are not
documented in dt binding and also there is no code associated with them
that's why remove them.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/369139fafa1745252ef687e31aebf6bcc2080a32.1670853972.git.michal.simek@amd.com
 2023-01-10 08:15:54 +01:00
Michal Simek
4b422a12df net: zynq_gem: Add support for new compatible str with xlnx prefix 
cdns prefix was deprecated and replaced by xlnx one.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7d1312d741349451b36558baa3e9132247303992.1670599167.git.michal.simek@amd.com
 2023-01-10 08:15:54 +01:00
Michal Simek
a30a3ec888 arm64: zynqmp: Remove id from usb node name 
There is no reason to have number in usb node name. This is also sync up
patch with upstream kernel.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7b13db34031af88a5738d2ec2e05d2498ea8c869.1670590595.git.michal.simek@amd.com
 2023-01-10 08:15:54 +01:00
Michal Simek
b1d3e7fd9a arm64: zynqmp: Align gpio-key node names with dtschema 
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
It is based on kernel commit (228e8a88b1915a2b467c83d8d0976605f1272fae).

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/ae23999097553acb21dfca9288a913bb8b24587a.1670590595.git.michal.simek@amd.com
 2023-01-10 08:15:54 +01:00
Michal Simek
8dfdb6958b arm64: zynqmp: Fix AMS device tree node 
Aligned node description with the Linux kernel. Node has been added by
kernel commit (271c1fa01c2307cf74f4656390d6299991119c3e).

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/74188b64cf615100345d058e026cb0d2de0e089b.1670590595.git.michal.simek@amd.com
 2023-01-10 08:15:54 +01:00
Michal Simek
e6a01d5102 arm64: zynqmp: Added GEM reset definitions 
The Cadence GEM/MACB driver now utilizes the platform-level reset on the
ZynqMP platform. Add reset definitions to the ZynqMP platform device
tree to allow this to be used.
Linux upstream commit (e461bd6f43f4e568f7436a8b6bc21c4ce6914c36).

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/14e3637735dbc626659e96d142f04a63398362f8.1670590595.git.michal.simek@amd.com
 2023-01-10 08:15:54 +01:00
Michal Simek
2a5f7fd30c arm64: zynqmp: Sync #dma-cells property location 
Sync property location with Linux kernel done by Linux commit
(1ff2d58e60c8093e9be935b1f191341c0cda957a).

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/e09ad90ea610a81528ef5ecbc931bc9791b1c653.1670590595.git.michal.simek@amd.com
 2023-01-10 08:15:54 +01:00
Tom Rini
7b84c973b9 ns16650: Correct CONFIG_SYS_NS16550_MEM32 platforms 
There are currently no platform that are both CONFIG_SYS_NS16550_MEM32
and not (per how the logic was prior to being broken in 0478dac62a
("kbuild: Remove uncmd_spl logic")) enabled in CONFIG_DM_SERIAL. We drop
this line out now so that platforms which do use
CONFIG_SYS_NS16550_MEM32 and depending on stage may or may not have
DM_SERIAL set.

Fixes: 0478dac62a ("kbuild: Remove uncmd_spl logic")
Reported-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> #on Ringneck PX30, Puma RK3399
 2023-01-09 11:30:49 -05:00
Tom Rini
cebdfc22da Merge branch 'next' 
Signed-off-by: Tom Rini <trini@konsulko.com>
 2023-01-09 11:30:08 -05:00
Tom Rini
62e2ad1cea Prepare v2023.01 
Signed-off-by: Tom Rini <trini@konsulko.com>
v2023.01 		2023-01-09 11:07:33 -05:00
Jagan Teki
31500e7bcf board: rockchip: Fix binman_init failure on EVB-RK3568 
For some newer SoCs like RK3568, the Rockchip has not released
any DDR drivers yet so idbloader needs to create manually using
DDR binaries offered by rkbin. This indeed no requirement to
enable TPL in the U-Boot source code.

If we mark TPL disabled and mark BINMAN enabled by default then
there would be an issue of binman_init failure during board
relocation. This is true as binman failed to find the top-level
node like u-boot-tpl here.

Here is the boot issue observed in Radxa-CM3 RK3566 board,

 U-Boot 2023.01-rc4-00057-gac2505d463-dirty (Jan 04 2023 - 23:44:18 +0530)

 Model: Radxa Compute Module 3(CM3) IO Board
 DRAM:  2 GiB
 binman_init failed:-2
 initcall sequence 000000007ffd2008 failed at call 0000000000a18cac (err=-2)
 ### ERROR ### Please RESET the board ###

This might be fixed via binman node in rockchip-u-boot.dtsi however
disable BINMAN_FDT for evb-rk3568 defconfig for now as we are at the
end of the release cycle.

Fixes: 05713d5707 ("rockchip: generate u-boot-rockchip.bin with binman
for ARM64 boards")
Cc: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
 2023-01-09 08:29:15 -05:00
Tom Rini
fe33066d24 Merge tag 'u-boot-nand-20230108' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash into next 
Pull request for u-boot-nand-20230108

- rawnand: omap_gpmc: driver model support
 2023-01-08 13:12:42 -05:00
Marek Vasut
53e5b584e6 distro_bootcmd: Fix copy-paste error 
The "SCRIPT FAILED" string is copied from scan_dev_for_scripts script,
update it so it prints "EXTLINUX FAILED" instead in scan_dev_for_extlinux
script.

Signed-off-by: Marek Vasut <marex@denx.de>
 2023-01-08 08:45:17 -05:00
Roger Quadros
7363cf0581 mtd: rawnand: omap_elm: u-boot driver model support 
Support u-boot driver model. We still retain
support legacy way of doing things if ELM_BASE
is defined in <asm/arch/hardware.h>

We could completely get rid of that if all
platforms defining ELM_BASE get rid of that definition
and enable CONFIG_SYS_NAND_SELF_INIT and are verified
to work.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/all/20221220102203.52398-9-rogerq@kernel.org
Link: https://lore.kernel.org/all/CABGWkvrvKiVA_yaDnHJcHEKwc+pEuLdz=i6HQEY0oJQvohCUsw@mail.gmail.com
 2023-01-08 10:38:50 +01:00
Roger Quadros
8993d5f2ac dt-bindings: mtd: Add ti, elm DT binding documentation 
Adds DT binding documentation for the TI Error Location Module.
This is picked up from the Linux Kernel.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-8-rogerq@kernel.org
 2023-01-08 10:38:50 +01:00
Roger Quadros
c2147bc7ec mtd: rawnand: omap_gpmc: Enable SYS_NAND_PAGE_COUNT for OMAP_GPMC 
The symbol is required for NAND support in SPL when using
OMAP_GPMC driver.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-7-rogerq@kernel.org
 2023-01-08 10:38:50 +01:00
Roger Quadros
b747090705 mtd: rawnand: omap_gpmc: Add SPL NAND support 
Enables SPL NAND support for ARCH_K3 by enabling
SPL_NAND_INIT and SPL_SYS_NAND_SELF_INIT.

Legacy OMAP2plus platforms still rely on SPL_NAND_AM33XX_BCH
instead.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-6-rogerq@kernel.org
 2023-01-08 10:38:50 +01:00
Roger Quadros
ff0d078942 mtd: rawnand: omap_gpmc: support u-boot driver model 
Adds driver model support.

We need to be able to self initialize the NAND controller/chip
at probe and so enable CONFIG_SYS_NAND_SELF_INIT.

Doing so requires nand_register() API which is provided by nand.c
and needs to be enabled during SPL build via CONFIG_SPL_NAND_INIT.
But nand.c also provides nand_init() so we need to get rid of nand_init()
in omap_gpmc driver if CONFIG_SPL_NAND_INIT is set.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-5-rogerq@kernel.org
 2023-01-08 10:38:50 +01:00
Roger Quadros
dbb8711530 dt-bindings: mtd: Add ti, gpmc-nand DT binding documentation 
Add DT binding documentation for the TI GPMC NAND controller.
This is picked up from the Linux Kernel.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-4-rogerq@kernel.org
 2023-01-08 10:38:50 +01:00
Roger Quadros
fa87360b3a mtd: rawnand: nand_base: Allow base driver to be used in SPL without nand_bbt 
nand_bbt.c is not being built with the nand_base driver during SPL
build. This results in build failures if we try to access any nand_bbt
related functions.

Don't use any nand_bbt functions for SPL build.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-3-rogerq@kernel.org
 2023-01-08 10:38:30 +01:00
Roger Quadros
04fcd25873 mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction 
The BCH detection hardware can generate ECC bytes for multiple
sectors in one go. Use that feature.

correct() only corrects one sector at a time so we need to call it
repeatedly for each sector.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20221220102203.52398-2-rogerq@kernel.org
 2023-01-08 10:33:20 +01:00
Tom Rini
051f409d25 pylibfdt: Allow version normalization to fail 
In some cases, we might not have the sic portion of setuputils
available. Make our import and use of this be done in try/except blocks
as this is done to suppress a run-time warning that is otherwise
non-fatal.

Reported-by: Pali Rohár <pali@kernel.org>
Fixes: 1416591876 ("pylibfdt: Fix disable version normalization")
Signed-off-by: Tom Rini <trini@konsulko.com>
 2023-01-07 18:02:26 -05:00