Fix a missing closing quote in the error message when a regulator name
is not unique.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add support for eMMC specification version 5.1B by defining
MMC_VERSION_5_1B and including it in the version array.
eMMC 5.1B (JESD84-B51B) is a minor revision of the 5.1 specification
that primarily addresses MDT (Manufacturing Date) adjustment for dates
beyond 2025. This aligns with the Linux kernel commit 9996707822f82
("mmc: core: Adjust MDT beyond 2025").
Since the manufacturing date field is not currently used in U-Boot,
this change has no functional impact beyond proper device recognition.
It allows the driver to correctly identify and initialize eMMC devices
that report version 5.1B in their Extended CSD register.
Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This driver adds the base support of pinctrl over SCMI. The driver
does two main things. First, it allows you to configure the initial
pin states. Secondly, it's used a base to build a GPIO driver on
top of it.
To configure the states then add a pinmux config to the scmi_pinctrl
section:
scmi_pinctrl: protocol@19 {
reg = <0x19>;
pinmux1: pinmux_test {
pinmux = <0 1 0xFFFFFFFF 18 1
0 2 0xFFFFFFFF 18 1
0 3 0xFFFFFFFF 18 1>;
function = "f_gpio1";
groups = "grp_1", "grp_3";
};
};
Under linux the pinctrl subsystem will parse the function and group
properties and use that to handle muxing. However, under u-boot the
pin muxing is done using the "pinmux" property, which feeds raw SCMI
pinctrl PINCTRL_SETTINGS_CONFIGURE commands to the server. The
numbers are: selector, identifier, function_id, config_type, and
config_value. In the example above, it sets pins 1, 2, and 3 to 1.
The linux-kernel ignores this pinmux property.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Delete some extra space characters to make checkpatch.pl happy:
WARNING: please, no space before tabs
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add all the pinctrl message IDs. I renamed SCMI_MSG_PINCTRL_CONFIG_SET
to SCMI_PINCTRL_SETTINGS_CONFIGURE so the naming matches the spec better.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
As exposed by "make randconfig", how we have SCMI_FIRMWARE today is
incomplete, and in one case, used incorrectly. First, SCMI_FIRMWARE has
a build-time dependency on OF_CONTROL being enabled, so add that.
Second, RESET_SCMI depends on SCMI_FIRMWARE being enabled, it should not
select that symbol. In turn, a number of platforms need to now enable
SCMI_FIRMWARE explicitly and not rely on RESET_SCMI to enable it for
them.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Anshul Dalal <anshuld@ti.com>
Acked-by: Michal Simek <michal.simek@amd.com> # Versal Gen 2
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Related to the problem resolved with commit 2092322b31 ("boot: Add
fit_config_get_hash_list() to build signed node list"), add a testcase
for the problem as well.
Reported-by: Apple Security Engineering and Architecture (SEAR)
Signed-off-by: Tom Rini <trini@konsulko.com>
Add a condition to enable the PMIC sysreset function via the
system-power-controller device tree property in addition to the existing
Kconfig dependency, provided the PMIC supports it.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> # RK8xx
Currently, U-Boot fails with an FDT patching error if the LG Optimus 2X
device tree lacks a panel node. Since the panel is optional hardware,
patching should be optional as well. Fix this by allowing bootflow to
continue if the panel node is missing.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Align with existing Linux Tegra device trees to simplify using U-Boot
device trees as a base for future Linux adaptations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Remove interrupt and GPIO controller properties from MAX8907 node since
the PMIC does not have any GPIO cells and does not expose any interrupt
features.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Mot based devices use LM3532 LED controller with 3 sources. Panel
backlight uses LED 0 while keypad uses LED 1 and 2. Adjust device tree
accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Check for 'cpcap' within the compatible string, as various CPCAP
compositions always include this component.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Linux kernel CPCAP driver uses uppercase regulator node names, while
this driver uses lowercase. Since regulator names can be case-insensitive,
update the driver to support both uppercase and lowercase node names.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The bit_offset_from_cpcap_lowest_voltage value was inherited from the
downstream kernel as a quirk. With the correct voltage table, it is no
longer needed. An additional benefit is that SW1, SW2, and SW4 now share
the same voltage table.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The pulse width field requires better precision during calculation. Add a
proper frequency divider calculation based on the PWM clock instead of
hardcoding it to 1.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The pulse_width is expressed as N/256. A 100% duty cycle is only possible
when multiplied by 256 instead of 255.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add active-low support to the PWM controller, useful for active-low
pwm-leds.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
When PWM config was updated the clock was restarted which caused loss of
previous configuration of other channels. Further this fixes a bug/hang
that can happen when set_enable was called before set_config.
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add debug log prints with a message that SKU is unknown.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Until now all Tegra chips except Tegra20 had a fallback if SKU is not
known. This caused issues previously when certain SKU wasn't known. Add a
fallback for Tegra20 aligning it with other Tegra SoC generations.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add definition for Tegra20 SKU 0x4 / A04 found in Sony Tablet P.
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Simon Glass <sjg@chromium.org> says:
Each arch does something slightly different before booting the OS. Some
archs even do different things depending on the CPU type.
It is quite hard to know what actually happens in the final milliseconds
before the OS boot.
This series attempts to start cleaning up U-Boot in this area.
The basic intent is to create a new bootm_final() function which can be
called by all archs. It provides some flags for a couple of necessary
variations but otherwise it is generic.
All architectures are converted over to use this new function.
board_quiesce_devices() is moved into bootm_final() so that all archs
benefit from it.
This series fixes a bug in device_remove() is fixed where removing a
parent with specialised flags (e.g. DM_REMOVE_ACTIVE_ALL) could leave
children activated, since they do not match the flags. This fixes is
needed to avoid bootm_final() causing test failures on sandbox.
Future work could take this a little further:
- Convert EFI loader to use the same function
- Improve comments for cleanup_before_linux() across architectures
- Support fake-run tracing on all archs
Link: https://lore.kernel.org/r/20260306023638.2678886-1-sjg@chromium.org
Add a call to bootm_final() before the simulated kernel jump. This
adds the "Starting kernel" message, bootstage tracking,
board_quiesce_devices() and dm_remove_devices_active() which were not
previously called on sandbox.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add a call to bootm_final() before jumping to the kernel. This adds
the "Starting kernel" message, bootstage tracking,
board_quiesce_devices() and dm_remove_devices_active() which were not
previously called on Xtensa.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add a call to bootm_final() before jumping to the kernel. This adds
the "Starting kernel" message, bootstage tracking,
board_quiesce_devices() and dm_remove_devices_active() which were not
previously called on SH.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add a call to bootm_final() before jumping to the kernel. This adds
the "Starting kernel" message, bootstage tracking,
board_quiesce_devices() and dm_remove_devices_active() which were not
previously called on Nios2.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Add a call to bootm_final() before jumping to the kernel. This adds
the "Starting kernel" message, bootstage tracking,
board_quiesce_devices() and dm_remove_devices_active() which were not
previously called on m68k.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
Tested-by: Angelo Dureghello <angelo@kernel-space.org>
Acked-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Replace the open-coded bootstage_fdt_add_report() and
bootstage_report() with a call to bootm_final(). This also adds the
"Starting kernel" message, board_quiesce_devices() and
dm_remove_devices_active() which were not previously called on
PowerPC.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Replace the open-coded bootstage_fdt_add_report() and
bootstage_report() with a call to bootm_final(). This also adds the
"Starting kernel" message, board_quiesce_devices() and
dm_remove_devices_active() which were not previously called on MIPS.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Replace the open-coded printf and bootstage_mark_name with a call to
bootm_final(). This also adds board_quiesce_devices() and
dm_remove_devices_active() which were not previously called on
MicroBlaze.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Replace the open-coded printf and bootstage_mark_name with a call to
bootm_final(). This also adds board_quiesce_devices() and
dm_remove_devices_active() which were not previously called on ARC.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
The ARM announce_and_cleanup() duplicates the common pre-boot steps.
Replace it with a call to bootm_final().
Drop the ARM weak board_quiesce_devices() definition since it is now
called from bootm_final() and the generic weak definition in bootm.h
is used instead.
Note that the printf() ordering changes slightly: it now prints before
bootstage processing rather than after, matching x86 and RISC-V.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
ARM stashes bootstage data to a known memory location before booting,
so the kernel can pick it up. Add this to bootm_final() so all
architectures benefit from it.
The bootstage_stash_default() function is a no-op when bootstage or
stashing is disabled.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The RISC-V announce_and_cleanup() duplicates the common pre-boot
steps. Replace it with a call to bootm_final().
Move board_quiesce_devices() into bootm_final() so it is available to
all architectures. Drop the RISC-V weak definition and header
declaration since the generic one in bootm.h is used instead.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The x86 code in bootm_announce_and_cleanup() is very similar to the new
bootm_final() function, so just use the latter.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
There are various functions which announce that booting is imminent and
do related preparation. Most of these are arch-specific.
In practice, most archs do a similar thing. It would be better to
have a common function, with perhaps some events for things that are
really arch- and board-specific.
Create a new bootm_final() function with the common pre-boot steps:
printing the "Starting kernel" message, recording bootstage data,
optionally writing bootstage to the FDT and printing a report, and
removing active devices.
Be careful to avoid using BIT() macros which are not available with host
tools.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Neither bootstage_fdt_add_report() nor bootstage_report() has a dummy
double for when bootstage is disabled. Add them.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
When dm_remove_devices_active() removes devices using specialised flags
like DM_REMOVE_ACTIVE_ALL, a parent device may match (e.g. MMC has
DM_FLAG_OS_PREPARE) while its children do not. This deactivates the
parent but leaves children activated, an inconsistent state.
Later, when uclass_destroy() calls device_remove() with DM_REMOVE_NORMAL
on the already-deactivated parent, it returns early without touching the
children. The subsequent device_unbind() then fails because the children
are still activated.
Fix this by dropping only the DM_REMOVE_ACTIVE_ALL requirement for child
removal when the parent is being removed. This ensures children are
removed along with their parent, while still preserving other flags like
DM_REMOVE_NON_VITAL so that vital devices remain protected.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Move the flags_remove() call before device_chld_remove() and save the
result in a separate variable. This is just a refactoring with no
behaviour change, preparing for the next commit which needs to know
whether the parent will be removed before deciding how to remove its
children.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Quentin Schulz <quentin.schulz@cherry.de> says:
This migrates the last user of the legacy LED API, IMX233-OLinuXino and
net/bootp.c, to the modern LED framework.
I do have concern about being able to use BOOTP in SPL? In which case, I
should probably add an additional check on CONFIG_IS_ENABLED(LED) in
addition to IS_ENABLED(CONFIG_LED_BOOT)?
I haven't tested this as I do not own an IMX233-OLinuXino, so please
give this a try if you own this device.
Then, since there's no user left of this legacy API, it is entirely
removed.
Link: https://lore.kernel.org/r/20251120-legacy-led-removal-v1-0-369d44338358@cherry.de
No user of the legacy LED API anymore (except Sunxi with the PinePhone
but that is now a Sunxi-specific implementation), so let's remove
anything related.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
This migrates the last user of the legacy LED API, IMX233-OLinuXino, to
the modern LED framework.
The current implementation does the following:
- lit the LED when booting,
- turn off the LED the moment a BOOTP packet is received,
The first step is easily reproduced by using the
/options/u-boot/boot-led property to point at the LED. Unfortunately,
the boot-led is only lit by U-Boot proper at the very end of the boot
process, much later than currently. We can however force the LED on
whenever the GPIO LED driver is bound by marking the LED as
default-state = "on", and this happens slightly before board_init() is
called. We then do not need /options/u-boot/boot-led property for that
anymore.
However, the second step relies on /options/u-boot/boot-led and
CONFIG_LED_BOOT being set to reproduce the same behavior and requires us
to migrate net/bootp.c to the modern LED framework at the same time to
keep bisectability.
I couldn't figure out how to map CONFIG_LED_STATUS_BIT=778 to an actual
GPIO on the SoC but according to the schematics[1] only one LED is
present. I couldn't also map the SoC pin number to an actual GPIO from
the IMX23 manual, but there's already one GPIO LED specified in the
Device Tree so my guess is all of those are one and the same.
This was only build tested as I do not own this device.
[1] https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/iMX233-OLinuXino-Mini/1.%20Latest%20hardware%20revision/iMX233-OLINUXINO-MINI%20hardware%20revision%20E/iMX233-OLINUXINO-MINI_Rev_E.pdf
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
