After finishing a later patch in this series, I discovered I had
neglected to update the list of declarations in exports.h to
match. But then I realized I wasn't the first to do that.
Use the existing mechanism and DRY it out.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
As for the i2c functions, drop the dummy entries that, if ever used,
would just have the standalone app get some random content in the
return register.
While deprecated, the spi_{setup,free}_slave functions do exist even
with CONFIG_DM_SPI - and a standalone app can't really do anything but
refer to a spi device via a (bus, cs) pair.
Eventually, one should probably export some function that could allow
a standalone app to get a struct udevice* corresponding to either a
full DT path, an alias, or perhaps a label (provided one builds with
-@), and then export functions that can operate on that.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
There's really no good reason to create stub entries that would call a
function that doesn't even return anything sensible.
The existence of these two i2c_* functions depends on
CONFIG_IS_ENABLED(SYS_I2C_LEGACY), which does depend on !DM_I2C, but
is not equivalent to it. They are probably rather hard to use unless
CMD_I2C and something in U-Boot has called "i2c dev foo" to set the
current i2c bus before calling the standalone app, so keep that
dependency.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Currrently, malloc and free are function-like macros, while calloc,
realloc and memalign are object-like macros.
Usually, this doesn't matter, but it does when the identifiers appear
without a following open parenthesis, such as when their address is
taken for building the export table. Adding calloc or realloc to that
table breaks the build on sandbox due to this inconsistency.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Some of the functions in this file do not follow the normal style. Fix
this so that things are more consistent.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
It's important to return the actual firmware data size as some
firmware files may have no checksum and need the size as the only
way for firmware validation check.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
The CONFIG_ENV_VARS_UBOOT_CONFIG should protect only U-Boot
configuration variables in environment, those are arch, cpu,
board, board_name, vendor, soc. It should certainly not hide
usb_ignorelist or env_fdt_path from the environment. Fix it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Introduce two new parameters to be used with mkimage -f auto to bundle
TFA BL31 image into fitImage, using auto-generated fitImage. Add -y to
specify TFA BL31 file name and -Y to specify TFA BL31 load and entry
point address. This is meant to be used with systems which boot all of
TFA BL31, Linux and its DT from a single fitImage, all booted by U-Boot.
Example invocation:
"
$ mkimage -E -A arm64 -C none -e 0x50200000 -a 0x50200000 -f auto \
-d arch/arm64/boot/Image \
-b arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dtb \
-y ../tfa/build/rcar_gen4/release/bl31.bin -Y 0x46400000 \
/path/to/output/fitImage
"
Documentation update and test are also included, the test validates
both positive and negative test cases, where fitImage does not include
TFA BL31 and does include TFA BL31 blobs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Replace #define<TAB> with #define<space> to be consistent in
the entire file. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add omap common environment variables to .env. We retain the old-style C
environment .h files to maintain compatibility with other omap devices that
have not moved to using .env yet.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
PCA9450 PMIC supports reading the reset status from the PWRON_STAT
register. Bits 7-4 give indication of the PMIC reset cause:
- PWRON (BIT7) - Power ON triggered by PMIC_ON_REQ input line,
- WDOGB (BIT6) - Boot after cold reset by WDOGB pin (watchdog reset),
- SW_RST (BIT5) - Boot after cold reset initiated by the software,
- PMIC_RST (BIT4) - Boot after PMIC_RST_B input line trigger.
Add support for reading reset status via the sysreset framework in a
convenient printable format.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The family of PCA9450 PMICs have the ability to perform system resets.
Restarting via PMIC is preferred method of restarting the system as all
the peripherals are brought to a know state after a power-cycle. The
PCA9450 features a cold restart procedure which is initiated by an I2C
command 0x14 to the SW_RST register.
Support in Linux for restarting via PCA9450 PMIC has been added by
Linux commit 6157e62b07d9 ("regulator: pca9450: Add restart handler").
Now add support for it also in the U-Boot via sysreset framework.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The code in tps65910_regulator.c treats the field supply in struct
tps65910_regulator_pdata as an int and even tests the value for being
negative so change it from a u32 to int so that the code all works as
expected.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The commends in include/power/pmic.h say that once SPL_DM_PMIC exists we
should update things. This has been true for some time, so let us update
this to have the legacy portions in their own header, which should not
be directly included. This cleans up the logic within the file too
slightly.
Signed-off-by: Tom Rini <trini@konsulko.com>
The RK806 PMIC has a bitfield for configuring the restart/reset behavior
(which I assume Rockchip calls "function") whenever the PMIC is reset
either programmatically (c.f. DEV_RST in the datasheet) or via PWRCTRL
or RESETB pins.
For RK806, the following values are possible for RST_FUN:
0b00 means "Restart PMU"
0b01 means "Reset all the power off reset registers, forcing
the state to switch to ACTIVE mode"
0b10 means "Reset all the power off reset registers, forcing
the state to switch to ACTIVE mode, and simultaneously
pull down the RESETB PIN for 5mS before releasing"
0b11 means the same as for 0b10 just above.
This adds the appropriate logic in the driver to parse the new
rockchip,reset-mode DT property to pass this information. It just
happens that the values in the binding match the values to write in the
bitfield so no mapping is necessary.
For backward compatibility reasons, if the property is missing we set it
to 0b10 (i.e. BIT(7)) like before this commit was merged instead of
leaving it untouched like in the kernel driver.
Note that this does nothing useful for U-Boot at the moment as the ways
to reset the device (e.g. via `reset` command) doesn't interact with the
RK8xx PMIC and simply does a CPU reset.
Considering the upstream Linux kernel left this register untouched until
(assumed) v6.17[1], this is useful for cases in which the U-Boot
bootloader has this patch (and running with a DT with
rockchip,reset-mode property set) and running an upstream kernel before
(assumed) v6.17, or alternatively later without the property in the
kernel DT.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/commit/?id=87b48d86b77686013f5c2a8866ed299312b671db
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit introduces a new API,
request_firmware_into_buf_via_script(), to the fs_loader framework.
This function allows firmware to be loaded into memory using
a user-defined U-Boot script, providing greater flexibility for
firmware loading scenarios that cannot be handled by static file
paths or device/partition selection alone.
Key features:
- The API runs a specified U-Boot script (by name), which is responsible
for loading the firmware into memory by any means (e.g., load from MMC, USB, network, etc.).
- The script must set two environment variables: 'fw_addr'
(the memory address where the firmware is loaded) and
'fw_size' (the size of the firmware in bytes).
- The function validates these variables, copies the firmware into a newly
allocated buffer (using memdup), and returns the pointer
via the provided double pointer argument.
- The maximum allowed firmware size is checked to prevent buffer overflows.
- The environment variables are cleared after use to avoid stale data.
- Detailed error messages are provided for all failure conditions to aid debugging.
Usage example:
1. Define a U-Boot script in the environment that loads the firmware
and sets the required variables:
=> env set my_fw_script 'load mmc 0:1 ${loadaddr} firmware.bin &&
env set fw_addr ${loadaddr} && env set fw_size ${filesize}'
2. In your code, call the new API:
void *fw_buf = NULL;
int ret = request_firmware_into_buf_via_script(&fw_buf, 0x46000000, "my_fw_script");
if (ret < 0)
return ret;
This approach allows board integrators and users to customize the firmware
loading process without modifying the source code,
simply by changing the script in the U-Boot environment.
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[trini: Fix printf of size_t needing to use %zx]
Signed-off-by: Tom Rini <trini@konsulko.com>
Because the early malloc pool size is set to 0x18000, so using this
start address may cause conflict with ATF, then corrupt the heap data.
So we delete the definition to use the default early malloc pool from
CONFIG_SPL_STACK to avoid any conflict
Signed-off-by: Ye Li <ye.li@nxp.com>
Cherry picked from nxp-imx/uboot-imx commit
1ba675df122627a19debe1d807877052705372c6
Jérémie Dautheribes: applied the same patch to the frdm and qsb
imx93-based boards
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
The legacy network stack sets net_try_count to 1 at the beginning of the
net_loop() function. This is required for net_start_again() to work
properly. Therefore, set the variable accordingly in the do_ping()
function when NET_LWIP=y. This fixes an issue where a ping to an
unreachable destination would run twice on the same network device. For
example with qemu_arm64_lwip_defconfig:
=> dhcp
DHCP client bound to address 10.0.2.15 (3 ms)
=> ping 10.0.0.1
Using virtio-net#32 device
ping failed; host 10.0.0.1 is not alive
Using virtio-net#32 device
ping failed; host 10.0.0.1 is not alive
=> QEMU: Terminated
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Introduce the DNS Kconfig symbol so that various network commands may
use host names without the dns command (CMD_DNS) being selected.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
CC: E Shattow <e@freeshell.de>
The header of LiMon imported files reference a License file which
does not exist in U-Boot. Some files were forgotten when adding the
SPDX-License-Identifier.
The LiMon files were originally licensed under GPLv2 as can be seen in
commit [2ea91039].
Based on this commit, add the correct SPDX license identifier.
While at it drop the reference to the non-existing License file from all
LiMon files and update the SPDX-License-Identifier to SPDX version 3.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Introduce Voyager board specific code, including
- dram info
- shared cache enabling
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This driver adds support for the single mailbox channel of the MSS
system controller on the Microchip PolarFire SoC.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
We switched towards standard boot with still keeping a fallback
using legacy boot command alive. Add a deprecation warning to
make it more clear that we will remove it in future versions.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Allows run-time control over watchdog auto-start and the timeout via
setting the environment variable watchdog_timeout_ms. A value of zero
means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value.
Users can enable the watchdog to monitor the boot process until userspace
or OS takes over to serve the watchdog.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
SPL checks for a magic word in the system manager's scratch
register to determine if an L2 reset has occurred. If detected,
SPL places all slave CPUs (CPU1–3) into WFI mode. The master
CPU (CPU0) then initiates a warm reset by writing to the RMR_EL3
system register and also enters WFI mode.
This warm reset flow is handled entirely within the HPS. The
function `socfpga_sysreset_request()` triggers the warm
reset, and upon SPL re-entry, the updated `lowlevel_init_soc64.S`
handles the necessary initialization.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Put all slave CPUs (CPU1-3) into WFI mode. Master CPU (CPU0) writes
the magic word into system manager's scratch register to indicate
the system has performed L2 reset and request reset manager to
perform hardware handshake and then trigger L2 reset. CPU0 put
itself into WFI mode. L2 reset will reboot all HPS CPU cores after
which all HPS cores are in WFI mode. L2 reset is followed by warm
reset request by SPL via RMR_EL3 system register.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Add i3c command file to support select, get i3c device
target list, read and write operation.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Fix the I3C device with spike filter unable to detect issue by setting
tHIGH_INIT to 200ns for first broadcast address.
This is according to MIPI SPEC 1.1.1 for first broadcast address
which is already part of linux upstreamed patch.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Enable i3c general uclass driver. This uclass driver will have
genaral read and write api to call the specific i3c driver.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
Enable driver for Synopsis MIPI DWI3C for the family
device agilex5. This driver is migrated from linux version 6.6.37 LTS
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@altera.com>
