Enable 32k crystal on the board. If external 32k source is not
used, 32k rc-osc comes into play, which is accurate to +-20%.
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Enable 32k crystal on the board. If external 32k source is not
used, 32k rc-osc comes into play, which is accurate to +-20%.
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Enable 32k crystal on the board. If external 32k source is not
used, 32k rc-osc comes into play, which is accurate to +-20%.
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Add a common helper function for doing the basic configuration
required for enabling the 32k crystal on some of the TI boards.
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Otherwise the custom-cape eeprom (at address 57) reports NACK which
results into "i2c_write: error waiting for data ACK (status=0x116)" and
terminates further scanning.
Signed-off-by: Marian Cingel <cingel.marian@gmail.com>
This patch fixes a boot failure on the AM64x EVM that was introduced when the do_board_detect function was removed during a refactoring.
It restores the do_board_detect function for the AM64x, AM62x, and AM65x boards to ensure the common board detection logic is executed correctly.
Fixes: 804b80288a ("board: am65x: Use generic AM6x board detection function")
Fixes: ce56e553c3 ("board: am64x: Use generic AM6x board detection functions")
Fixes: ff1b83c095 ("board: am62x: Add support for reading eeprom data")
Signed-off-by: Guillaume La Roque (TI.com) <glaroque@baylibre.com>
Anshul Dalal <anshuld@ti.com> says:
This patch series adds support for AM6254atl SiP (or AM62x SiP for
short) to U-Boot.
The OPN (Orderable Part Number) 'AM6254atl' expands as follows[1]:
AM6254atl
||||
|||+-- Feature Lookup (L indicates 512MiB of integrated LPDDR4)
||+--- Device Speed Grade (T indicates 1.25GHz on A53 cores)
|+---- Silicon PG Revision (A indicates SR 1.0)
+----- Core configuration (4 indicates A53's in Quad core config)
AM62x SiP provides the existing AM62x SoC with 512MiB of DDR
integrated in a single packages. The first 4 patches in the series
are cherry-picked from the devicetree-rebasing repository at
'v6.18-rc2-dts'.
Link: https://lore.kernel.org/r/20251025-62sip_support-v3-0-b4c8314d0055@ti.com
Guillaume La Roque (TI.com) <glaroque@baylibre.com> says:
This series adds EEPROM board detection support for AM62x and refactors
the board detection code across AM6x family boards to eliminate code
duplication.
The series introduces two new generic functions for AM6x boards:
- do_board_detect_am6(): Reads the on-board EEPROM with fallback logic
to alternate I2C addresses
- setup_serial_am6(): Sets up the serial number environment variable
from EEPROM data
Link: https://lore.kernel.org/r/20251103-am62xeeprom-v3-0-e390779c0fc5@baylibre.com
TI's AM6254atl (or AM62x SiP for short) provides the existing AM62x SoC
with 512MiB of DDR integrated in a single package.
This patch adds the necessary U-Boot devie tree files, the required
defconfigs along with the documentation for the AM62x SiP EVM.
AM62x SiP differs from the already supported AM62x in following ways:
- OP-TEE for the AM62x resides from 0x9e800000 to 0xa0000000 which needs
to be moved to 0x80080000 to free up space at end of DDR in AM62x SiP
with 512MiB of memory. This is required to allow U-Boot to relocate to
end of DDR before booting to the kernel.
- Changes to the env:
1. splashimage address updated from 0x80200000 to 0x81a00000
2. DFU addresses updated to match updated TEXT_BASE for SPL and U-Boot
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Replace the board-specific implementation of do_board_detect()
with a call to the generic do_board_detect_am6() function to
avoid code duplication across AM6x family boards.
The generic function provides the same functionality with
additional fallback logic to try alternate EEPROM addresses.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Guillaume La Roque (TI.com) <glaroque@baylibre.com>
Replace the board-specific implementation of do_board_detect() and
setup_serial() with calls to the generic do_board_detect_am6() and
setup_serial_am6() functions.
The generic function provides the same functionality with
additional fallback logic to try alternate EEPROM addresses.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Guillaume La Roque (TI.com) <glaroque@baylibre.com>
I2C EEPROM data contains the board name and its revision.
Add support for:
- Reading EEPROM data and store a copy at end of SRAM
- Updating env variable with relevant board info
- Printing board info during boot
Use the generic do_board_detect_am6() and setup_serial_am6()
functions to avoid code duplication across AM6x family boards.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Guillaume La Roque (TI.com) <glaroque@baylibre.com>
Add two new generic functions for AM6x family boards to simplify
board-specific implementations:
- do_board_detect_am6(): Generic board detection function that reads
the on-board EEPROM. It first attempts to read at the configured
address, and if that fails, tries the alternate address
(CONFIG_EEPROM_CHIP_ADDRESS + 1). This provides a common
implementation that can be used across different AM6x boards.
- setup_serial_am6(): Sets up the serial number environment variable
from the EEPROM data. The serial number is converted from
hexadecimal string format to a 16-character hexadecimal
representation and stored in the "serial#" environment variable.
Both functions are protected by CONFIG_IS_ENABLED(TI_I2C_BOARD_DETECT)
and are designed to be used by AM62x, AM64x, AM65x, and other AM6x
family boards.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Guillaume La Roque (TI.com) <glaroque@baylibre.com>
Kory Maincent (TI.com) <kory.maincent@bootlin.com> says:
This series converts the extension board framework to use UCLASS as
requested by Simon Glass, then adds extension support to pxe_utils
and bootmeth_efi (not tested) to enable extension boards devicetree load
in the standard boot process.
I can't test the imx8 extension scan enabled by the
imx8mm-cl-iot-gate_defconfig as I don't have this board.
I also can't test the efi bootmeth change as I don't have such board.
Link: https://lore.kernel.org/r/20251030-feature_sysboot_extension_board-v5-0-cfb77672fc68@bootlin.com
Remove the legacy extension board implementation now that all boards
have been converted to use the new UCLASS-based framework. This
eliminates lines of legacy code while preserving functionality
through the modern driver model approach.
Update the bootstd tests, due to the removal of extension hunter.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Migrate TI board cape detection from legacy extension support to the
new UCLASS-based extension board framework.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Clean up and reorganize cape detection code structure for improved
maintainability and readability.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
The CAPE_EEPROM_BUS_NUM configuration option was incorrectly depending
on CMD_EXTENSION, which represents the extension board command. However,
the cape scan functionality can be built and used independently of the
command interface through the SUPPORT_EXTENSION_SCAN option.
Change the dependency from CMD_EXTENSION to SUPPORT_EXTENSION_SCAN to
properly reflect that the I2C bus configuration is needed for the cape
scan function itself, not specifically for the command.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Disable cape detection functionality in xPL images to reduce size and
complexity in the early boot stage.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
The current spl_board_fixups API allows for modification of spl_image
before the SPL jumps to it. This can be used to modify the DT for the
next boot stage, however the current API only allows either the machine
arch or the board to use it.
This limits the utility of the API as there might be certain fixups that
should be applied to all boards sharing the same machine architecture
with others being board specific.
For TI's K3 specifically, this prevents us from performing architecture
level fixups since a lot of TI boards are already making use of the
spl_board_fixups API.
Therefore this patch splits the API into two to allow both board and the
architecture specific fixups. The order is kept as arch then board to
give board specific fixups the precedence.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Add initial support for AM62D2-EVM, Kconfig entries for binman, SPL,
base DTS files for u-boot and SPL, HS-SE and HS-FS support and initial
configs with SD-MMC, UART, eMMC and OSPI boot providing a baseline for
further enablement.
Also add labels and targets to AM62A-SK binman to enable AM62D2-EVM
builds to reuse existing binman infrastructure.
Technical Reference Manual - https://www.ti.com/lit/pdf/sprujd4
Schematics Link - https://www.ti.com/lit/zip/sprcal5
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Commit 649f4a7d3c ("board: ti: am57xx: Set fdtfile from C code
instead of findfdt script") prepends "ti/omap/" to the actual name
of the fdtfile whereas fit image boot needs exact dtb name. So, remove
"ti/omap" from name_fit_config by substituting it with an empty string.
Fixes: 649f4a7d3c ("board: ti: am57xx: Set fdtfile from C code instead of findfdt script")
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Add CMD_MEMINFO and CMD_MEMINFO_MAP to list of configs implied by
TI_COMMON_CMD_OPTIONS. This allows users to easily view the memory
configuration and the memory maps at runtime.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Make the fdt_map parameter a pointer to const, since the function only
reads the mapping table. This improves API correctness and allows maps
to live in read-only data.
No functional change intended
Signed-off-by: Bhimeswararao Matsa <bhimeswararao.matsa@gmail.com>
Unlike other K3 SoC's, am65 SoC has the capability to detect daughter
cards and automatically generate a list of white-space separated overlays
in name_overlays environment variable.
When applied during boot with get_overlay_mmc, the path to overlays with
default distribution is incorrect where path is currently: boot/dtb and
the overlays exist in boot/dtb/ti.
Fix the path in get_overlay_mmc so that overlays are automatically applied
correctly during boot time.
Signed-off-by: Judith Mendez <jm@ti.com>
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Enable cache for J722s to optimize performance of CPU to access data from
memory.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Enable cache for AM62p to optimize performance of CPU to access data from
memory.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Commit 86acdce2ba ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.
This cleanup was made semi-automatically using these scripts: [1].
No functional change, but the binary size for the modified boards is
reduced a bit.
[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Tested-by: Bryan Brattlof <bb@ti.com>
Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards
Move to using the latest generated RM YAML configuration files generated
by the K3 Resource Partitioning Tool which updates them to have standard
formatting with respect to indentation.
These files were generated from the untagged commit 41718bd5f915 ("docs: Update
docs and move them to docs folder") of the K3 Resource Partitioning tool. This
tool is packaged as a part of the public SDK and is not otherwise
publicly available.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Romain Gantois <romain.gantois@bootlin.com> says:
This is version one of my series which enables Ethernet support on the BBGE
board. This requires three main changes:
- Describing the MAC<->PHY link and DP83867 PHY accurately in the device
tree
- Enabling the RGMII1 pinmux configuration
- Enabling the DP83867 driver
These changes are all applied in patch 2.
Patch 1 enables excluding the DP83867 driver from SPL. This is done to
avoid size issues when adding the DP83867 driver to the am335x-evm
defconfig.
Link: https://lore.kernel.org/r/20250626-bbge-ethernet-v1-0-5b544fb1898f@bootlin.com
Currently, the Ethernet interface of the BBGE board isn't properly
supported.
To support this interface, describe the MAC<->PHY RGMII link and the
DP83867 PHY in the BBGE device tree. Enable the DP83867 PHY driver in
U-Boot Proper and mux the relevant RGMII lines.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Tested-by: Judith Mendez <jm@ti.com>
This reverts both commit 4628730ee6 ("mach-k3: add runtime memory
carveouts for MMU table") as well as commit b77066d732 ("mach-k3: add
dynamic mmu fixups for SPL stage") as some feedback from previous
iterations was missed.
This reverts commit b77066d732 and commit
4628730ee6.
Signed-off-by: Tom Rini <trini@konsulko.com>
In u-boot we only provide a single MMU table for all k3 platforms,
this does not scale for devices with reserved memory outside the range
0x9e780000 - 0xa0000000 or for devices with < 2GiB of memory (eg
am62-SIP with 512MiB of RAM).
To properly configure the MMU on various k3 platforms, the
reserved-memory regions need to be queried at runtime from the
device-tree and the MMU table should be updated accordingly.
This patch adds the required fixups to the MMU table (during proper
U-boot stage) by marking the reserved regions as non cacheable and
keeping the remaining area as cacheable.
For the A-core SPL, the 128MiB region starting from SPL_TEXT_BASE
is marked as cacheable i.e 0x80080000 to 0x88080000.
The 128MiB size is chosen to allow for future use cases such as falcon
boot from the A-Core SPL which would require loading kernel image from
the SPL stage. This change also ensures the reserved memory regions that
all exist past 0x88080000 are non cacheable preventing speculative
accesses to those addresses.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Beleswar Padhi <b-padhi@ti.com> says:
This series adds remoteproc support on MCU R5F in Split mode.
During boot, ROM can bring up the boot R5F cores in either lockstep or
split mode based on X509 certificate flags. If booted in lockstep mode,
the MCU R5F cores will run first the R5 SPL, and then once A72 comes up,
will run the Device Manager (DM) firmware. But if booted in split mode, core
0 will run DM firmware and second core sits in WFI. Shut it down so that
other firmwares can later be loaded on them.
The shutdown of MCU R5 Core 1 is invoked at A72 SPL init, as by that
time Device Manager (DM) is up and running on R5 Core 0. The shutdown
of MCU R5 Core 1 is handled by Device Manager itself.
Test logs:
https://gist.github.com/3V3RYONE/ee8e3cb9aa5f4c5c00b059b9c14bfa98
Link: https://lore.kernel.org/r/20250609081429.1724643-1-b-padhi@ti.com
Link the default firmware in the environment variable for MCU R5 core1
for all J7 platforms.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Sukrut Bellary <sbellary@baylibre.com> says:
This patch series adds the support for
1. In am33xx SoC[1], enhanced capture (eCAP) supports auxiliary PWM (APWM).
This series adds the PWM driver support for the APWM feature for eCAP on
AM33xx. AM335X_ECAP0_IN_PWM0_OUT is used to enable the backlight.
2. Fix build warning in ti-ehrpwm driver in dev_deb().
3. Enable eCAP0 PWM and LCD pin muxing to support splash screen on
AM335x EVM[2].
[1] AM335x TRM - https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
[2] AM335x EVM - https://www.ti.com/tool/TMDXEVM3358
per discussion on the earlier patch series,
https://lore.kernel.org/all/20250319202516.3300444-1-sbellary@baylibre.com/
dropping the device tree changes in this series due to OF_UPSTREAM
conflict.
As we are dropping the DT patch, started with the new series instead of
V2.
This series doesn't contain defconfig changes since we don't want to
enable LCD, splash screen and PWM support by default.
Enabling splash screen and PWM support in defconfig causes u-boot crash
on AM335x based beaglebone black. This will be handled in a separate
patch.
Link: https://lore.kernel.org/r/20250530212232.1686613-1-sbellary@baylibre.com
On AM335x EVM[1],
1. pin AM335X_ECAP0_IN_PWM0_OUT is used to enable the
backlight. ECAP0 can be configured in single channel PWM mode.
If CONFIG_PWM_TI_ECAP is enabled, perform eCAP0 pin muxing.
2. Pins LCD_DATA0 - LCD_DATA15, gpmc_ad8 - gpmc_ad15 and
lcd_vsync, lcd_sync, lcd_ac_bias_en, lcd_pclk are used for driving LCD.
If CONFIG_AM335X_LCD is enabled, perform the LCD pin muxing.
This is required to enable splash screen support on AM335x EVM.
[1] AM335x EVM - https://www.ti.com/tool/TMDXEVM3358
Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
There are common MMC args for TI plats in include/environment/ti/mmc.env.
Since we already include this, there is no need to redefine these
MMC vars. Use the defaults.
This seems like something that could have been done while refactoring
these vars in the first place as it happened after this AM62A file
was available hence the fixes tag.
Reported-by: Chirag Shilwant <c-shilwant@ti.com>
Fixes: 3709b52915 ("env: ti: mmc.env: Move mmc related args to common place")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
