Add support for the Microcrystal RV8263 and compatible RTCs. The
driver's name was taken from linux. It should work with any NXP PCF85063
compatible RTCs. It was tested with a RV8263.
Signed-off-by: Michael Walle <mwalle@kernel.org>
As u-boot doesn't have any loadable modules, tristate doesn't make
sense. Convert it to bool.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The Qualcomm SoCs votes for common resources via the RPMh subsystem.
Implement the necessary helpers for Interconnect providers to add the
nodes and vote via the RPPh "BCM" voters, which are vote endpoints for
each SoC subsystems. The APPS (ARM subsystem) has a dedicated endpoint.
The BCM voter will aggregate all the bandwidth for all the nodes
associated with a BCM voter, and internally the RPMh with also
aggregate all the votes from all the SoC subsystems for the same
BCM voter.
Link: https://patch.msgid.link/20251120-topic-interconnect-next-v5-4-e8a82720da5d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Let's introduce the Generic System Interconnect subsystem based on
the counterpart Linux framework which is used to vote for bandwidth
across multiple SoC busses.
Documentation for the Linux Generic System Interconnect Subsystem can
be found at [1].
Each bus endpoints are materialised as "nodes" which are linked together,
and the DT will specify a pair of nodes to enable and set a bandwidth
on the route between those endpoints.
The hardware resources that provide those nodes and provides the way
to vote for the bandwidth are called "providers".
The Interconnect uclass code is heavily based on the Linux one, with
some small differences:
- nodes are allocated as udevices instead of Linux idr_alloc()
- tag management is minimal, only normal xlate is supported
- getting nodes states at probe is not implemented
- providers are probed on demand while the nodes links are traversed
- nodes are populated on bind
- id management is simplified, static IDs and dynamics IDs can be used
- identical consume API as Linux, only implementation differs
Fully tested with associated DM test suite.
[1] https://docs.kernel.org/driver-api/interconnect.html
Link: https://patch.msgid.link/20251120-topic-interconnect-next-v5-1-e8a82720da5d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
We found that some serial console may pull TX line to GROUND during board
boot time. Airoha uses TX line as one of it's BOOT pins. This will lead
to booting in RESERVED boot mode.
It was found that some flashes operates incorrectly in RESERVED mode.
Micron and Skyhigh flashes are definitely affected by the issue,
Winbond flashes are NOT affected.
Details:
--------
DMA reading of odd pages on affected flashes operates incorrectly. Page
reading offset (start of the page) on hardware level is replaced by 0x10.
Thus results in incorrect data reading. Usage of UBI make things even
worse. Any attempt to access UBI leads to ubi damaging. As result OS loading
becomes impossible.
Non-DMA reading is OK.
This patch detects booting in reserved mode, turn off DMA and print big
fat warning.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
The spinand driver do 3 type of dirmap requests:
* read/write whole flash page without oob
(offs = 0, len = page_size)
* read/write whole flash page including oob
(offs = 0, len = page_size + oob_size)
* read/write oob area only
(offs = page_size, len = oob_size)
The trick is:
* read/write a single "sector"
* set a custom sector size equal to offs + len. It's a bit safer to
round up "sector size" value 64.
* set the transfer length equal to custom sector size
And it works!
Thus we can find all data directly from dirmap request, so flash specific
parameters is not needed anymore. Also
* airoha_snand_nfi_config(),
* airoha_snand_nfi_setup()
functions becomes unnecessary.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Set custom sector size equal to flash page size including oob. Thus we
will always read a single sector. The maximum custom sector size is
8187, so all possible flash sector sizes are supported.
This patch is a necessary step to avoid usage of flash specific
parameters.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This just reduce the number of modification of REG_SPI_NFI_CNFG and
REG_SPI_NFI_SECCUS_SIZE registers during dirmap operation.
This patch is a necessary step to avoid usage of flash specific
parameters.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
spi-airoha-snfi uses custom sector size in REG_SPI_NFI_SECCUS_SIZE
register, so setting of page/oob sizes in REG_SPI_NFI_PAGEFMT is not
required.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
During writing, the entire flash page (including OOB) will be updated
with the values from the temporary buffer, so we need to fill the
untouched areas of the buffer with 0xff value to prevent accidental
data overwriting.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Airoha snfi spi controller supports acceleration of DUAL/QUAD
operations, but does not supports DUAL_IO/QUAD_IO operations.
Luckily DUAL/QUAD operations do the same as DUAL_IO/QUAD_IO ones,
so we can issue corresponding DUAL/QUAD operation instead of
DUAL_IO/QUAD_IO one.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This driver can accelerate single page operations only, thus
continuous reading mode should not be used.
Continuous reading will use sizes up to the size of one erase block.
This size is much larger than the size of single flash page. Use this
difference to identify continuous reading and return an error.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This patch speed up cache reading/writing/updating opearions.
It was tested on en7523/an7581 and some other Airoha chips.
It will speed up
* page reading/writing without oob
* page reading/writing with oob
* oob reading/writing (significant for UBI scanning)
The only know issue appears in a very specific conditions for en7523 family
chips only.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Booting without this patch and disabled dirmap support results in
[ 2.980719] spi-nand spi0.0: Micron SPI NAND was found.
[ 2.986040] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 2.994709] 2 fixed-partitions partitions found on MTD device spi0.0
[ 3.001075] Creating 2 MTD partitions on "spi0.0":
[ 3.005862] 0x000000000000-0x000000020000 : "bl2"
[ 3.011272] 0x000000020000-0x000010000000 : "ubi"
...
[ 6.195594] ubi0: attaching mtd1
[ 13.338398] ubi0: scanning is finished
[ 13.342188] ubi0 error: ubi_read_volume_table: the layout volume was not found
[ 13.349784] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
[ 13.356897] UBI error: cannot attach mtd1
If dirmap is disabled or not supported in the spi driver, the dirmap requests
will be executed via exec_op() handler. Thus, if the hardware supports
dual/quad spi modes, then corresponding requests will be sent to exec_op()
handler. Current driver does not support such requests, so error is arrised.
As result the flash can't be read/write.
This patch adds support of dual and quad wires spi modes to exec_op() handler.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This operation is not needed because airoha_snand_write_data() and
airoha_snand_read_data() will properly handle data transfers above
SPI_MAX_TRANSFER_SIZE.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Coverity finds a potential integer overflow in the following code:
ncycles += ((op->data.nbytes * 8) / op->data.buswidth) / (op->data.dtr ? 2 : 1);
A quick analysis shows that the only caller of the suspicious code is the
spinand_select_op_variant() function from the drivers/mtd/nand/spi/core.c
file.
According to the code the value of op->data.nbytes is equal to
nanddev_per_page_oobsize(nand) + nanddev_page_size(nand)
Therefore it's maximum value a bit larger than 4Kb (I never seen flashes
with page size large than 4Kb). So op->data.nbytes always fits within
13 bits. As result an overflow will never happen.
Anyway it's better fix an issue to eliminate the error message.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This option is only meaningful within the davinci nand driver, so drop
the statement here (which had no effect).
Signed-off-by: Tom Rini <trini@konsulko.com>
The hidden symbol SPL_SYS_NAND_SELF_INIT was not being used correctly
leading to Kconfig dependency issues seen with "make allyesconfig". As
it's a select'd symbol we don't need to have a depends line on it, and
then in turn we need to also update the logic on SYS_NAND_PAGE_SIZE and
SYS_NAND_OOBSIZE.
Signed-off-by: Tom Rini <trini@konsulko.com>
All these chips are dual and quad capable. They are also DTR capable,
but the core is not yet ready for that.
Performances of all chips are comparable at 30MHz and are as follow:
Eraseblock single read speed: 938kiB/s
Eraseblock dual read speed: 1068kiB/s
Eraseblock quad read speed: 3751kiB/s
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Philippe Schenker <philippe.schenker@impulsing.ch> says:
This series fixes compilation errors when building for R5 cores and
addresses a security issue where authenticated images were not being
used correctly.
Patch 1: Cosmetic removal of duplicate code
Patches 2-3: Fix build errors caused by type mismatches between
function signatures and the types used in R5 builds.
Patches 4-5: fix a bug where ti_secure_image_post_process() relocates
images during authentication, but callers were still using the original
unverified addresses.
Patch 6: Implements is_running operation to allow querying R5F core status.
Link: https://lore.kernel.org/r/20251111071756.1257488-1-dev@pschenker.ch
Add is_running callback to query the R5F core halt status via the
TI-SCI processor control API. This allows the remoteproc framework
to determine whether the R5F core is currently runnin.
The core is considered running when the PROC_BOOT_CTRL_FLAG_R5_CORE_HALT
bit is not set in the control flags.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Reviewed-by: Andrew Davis <afd@ti.com>
After ti_secure_image_post_process() authenticates the image, it may
relocate it to a different memory location and update image_addr to
point to the verified image.
However, rproc_elf_load_image() and rproc_elf_get_boot_addr() were
still using the original "addr" parameter, potentially operating on
the unverified or stale image location instead of the authenticated
image.
Use image_addr (cast to ulong to match function signatures) after
authentication to ensure all operations work with the verified image.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
When compiling for R5 with CONFIG_TI_PRUSS enabled, the
pruss_probe() function passed a u64* to ofnode_get_addr_size_index(),
which expects an fdt_size_t*. This caused a compiler error
about incompatible pointer types.
Cast the size pointer to fdt_size_t* to match the function
signature.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
When compiling for R5 core with CONFIG_REMOTEPROC_TI_K3_R5F,
passing 'size' (ulong) to ti_secure_image_post_process() caused
a type mismatch compiler error.
On platforms where ulong and size_t differ in size, directly
casting could lead to out-of-bounds memory access. Fix by
introducing a size_t temporary variable, passing it to the
function, and writing back the potentially modified value for
use in subsequent calls.
Signed-off-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Acked-by: Andrew Davis <afd@ti.com>
Initially there was only one DSI bridge with one panel attached to this
device. This explained the call to uclass_first_device_err(UCLASS_PANEL,
...) which worked fine at the time.
Now that multiple bridges and panels, with different technologies, can
be plugged onto the board this way to get the panel device is outdated.
The lookup is done is two steps. First we circle through the
UCLASS_VIDEO_BRIDGE, and once we get one, we search through its
endpoints until we get a UCLASS_PANEL device available.
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
STM32MP2 SoCs feature a new version of the LTDC IP. This new version
features a bus clock, as well as a 150MHz pad frequency. Add its
compatible to the list of device to probe and handle quirks. The new
hardware version features a bus clock.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
The LVDS Display Interface Transmitter handles the LVDS protocol:
it maps the pixels received from the upstream Pixel-DMA (LTDC)
onto the LVDS PHY.
The LVDS controller driver supports the following high-level features:
• FDP-Link-I and OpenLDI (v0.95) protocols
• Single-Link or Dual-Link operation
• Single-Display or Double-Display (with the same content
duplicated on both)
• Flexible Bit-Mapping, including JEIDA and VESA
• RGB888 or RGB666 output
• Synchronous design, with one input pixel per clock cycle
• No resolution limitation.
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Add the compatible "panel-lvds" for simple-panel driver in U-Boot. In
Linux this compatible is managed by the driver
drivers/gpu/drm/panel/panel-lvds.c but in U-Boot the specific LVDS
features (bus_format/bus_flags) are not supported.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
The "Display Timings" in panel-common.yaml can be provided by 2 properties
- panel-timing: when display panels are restricted to a single resolution
the "panel-timing" node expresses the required timings.
- display-timings: several resolutions with different timings are supported
with several timing subnode of "display-timings" node
This patch update the parsing function to handle this 2 possibility
when index = 0.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Add support of STM32 ADCs to STM32MP13x. This patch introduces
stm32_adc_regspec structure, as this is already done in kernel
driver, to manage smartly the differences in register set
between STMP32MP15 and STM32MP13 ADCs.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
i2c_mux_select/deselect() are not called out of i2c-mux-uclass.c that's why
they should be static.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Rev.0.81 of the R-Car V4M Series Hardware User’s Manual removed the
"STPWT_EXTFXR" signal from the pin control register tables. As this is
further unused in the pin control driver, it can be removed safely.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Rev.0.71 of the R-Car V4M Series Hardware User’s Manual removed the
"CC5_OSCOUT" signal from the pin control register tables. As this is
further unused in the pin control driver, it can be removed safely.
Signed-off-by: Huy Bui <huy.bui.wm@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Rev.1.30 of the R-Car V4H Series Hardware User’s Manual removed the
"STPWT_EXTFXR" signal from the pin control register tables. As this is
further unused in the pin control driver, it can be removed safely.
Signed-off-by: Huy Bui <huy.bui.wm@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Rev.1.30 of the R-Car V4H Series Hardware User’s Manual removed the
"CC5_OSCOUT" signal from the pin control register tables. As this is
further unused in the pin control driver, it can be removed safely.
Signed-off-by: Huy Bui <huy.bui.wm@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
