The video test here is specific to the sandbox SDL video driver, so only
build it when that is enabled rather than VIDEO is enabled.
Reported-by: Alison Chaiken <alison@she-devel.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
The MediaTek mt6323 power driver cannot build without access to some
platform specific header files. Express that requirements in Kconfig as
well.
Signed-off-by: Tom Rini <trini@konsulko.com>
The commends in include/power/pmic.h say that once SPL_DM_PMIC exists we
should update things. This has been true for some time, so let us update
this to have the legacy portions in their own header, which should not
be directly included. This cleans up the logic within the file too
slightly.
Signed-off-by: Tom Rini <trini@konsulko.com>
In tps65941_buck_val and tps65941_ldo_val hex is an unsigned variable
being assigned the return value from a function that returns int. Change
hex to be an int so that the following test for an error as a negative
value will work as expected.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
In order to get the expected result from
rzg2l_usbphy_regulator_get_enable the return expression needs
parenthesis so that the binary and is performed before the double
logical not.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
In palmas_smps_val and palmas_ldo_val hex is an unsigned variable being
assigned the return value from a function that returns int. Change hex
to be an int so that the following test for an error as a negative value
will work as expected.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
In lp87565_buck_val hex is an unsigned variable being assigned the return
value from a function that returns int. Change hex to be an int so that
the following test for an error as a negative value will work as expected.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
In lp873x_buck_val and lp873x_ldo_val hex is an unsigned variable being
assigned the return value from a function that returns int. Change hex
to be an int so that the following test for an error as a negative value
will work as expected.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
In pmic_reg_read ret is only assigned to inside #if
CONFIG_IS_ENABLED(DM_I2C) so move the test and return ret inside as well
and also guard the declaration of ret with CONFIG_IS_ENABLED(DM_I2C) to
prevent a warning about an unused variable.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
In axp_init after checking the chip ID there is an else clause that
returns ret. ret is guaranteed to be 0 at this point as the code would
have returned above if not. The next statement is a return 0 so the
return ret is redundant, remove it.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
AMD/Xilinx/FPGA changes for v2026.01-rc1
mbv:
- Add it to CI loop
versal2:
- Wire UFS driver
serial:
- Add support for OF_PLATDATA in uartlite
misc:
- Mark some structures as const
u-boot internals were being corrupted following an EFI callback to
get_rng(). One of the many footprints was a corruption of the EFI
protocols linked list.
A request for >16 bytes of random data is broken into smaller requests.
Those requests are fed in a loop to the CAAM RNG, which uses a job
queue ring for interaction.
However, the job queue descriptor is created only at probe time. That
descriptor may end up needing an endian swap (LS1046A) before being fed
to the CAAM RNG. This corrupts the descriptor for the next iteration,
since it will be blindly endian swapped yet again.
Two issues arise. The number of words to endian swap is taken from the
input descriptor itself. So on the second iteration, the length has been
corrupted. This results in a corruption past the end of the descriptor:
whatever is after in memory is endian swapped too. Second, some of the
entries in the descriptor are DMA addresses. If the descriptor is still
somehow considered valid after swapping, the data at the corrupted DMA
address is now trampled.
Linux properly initializes the descriptor for each iteration. This is
what is now done with this commit.
Signed-off-by: Anthony Pighin <anthony.pighin@nokia.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
These values were calculated but not set.
They are required for the calculation of the delays, as stated in the
"QorIQ LS1043A Reference Manual, Rev. 6, 07/2020" page 2172.
The delays are calculated as (1/freq)*PCSSCK*CSSCK and
(1/freq)*PASC*ASC.
Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In get_lpuart_clk_rate if the call to clk_get_rate returns an error then
the call to return should pass the value of the error which is in rate
rather than ret which will be 0 as its value is not affected by this
error.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Avoid calling free(addr) twice if the device for ucode is not found.
This patch repeats a similar fix but that only applied to code without
CONFIG_TFABOOT enabled. This patch applies to the code with
CONFIG_TFABOOT enabled.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In mc_fixup_dpc_mac_addr noff is assigned the return value from
fdt_add_subnode so that is the variable that should be passed to
fdt_strerror and returned when negative.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In dpni_exit there is a NULL check for dflt_dpni after it is
dereferenced a number of times. Instead move the NULL check to early in
the function. Also assign NULL to dflt_dpni after free in both dpni_init
and dpni_exit.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In dpbp_exit there is a NULL check for dflt_dpbp after it is
dereferenced a number of times. Instead move the NULL check to early in
the function. Also assign NULL to dflt_dpbp after free in both dpbp_init
and dpbp_exit.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In dpio_exit there is a NULL check for dflt_dpio but it happens after
dpio_dflt has been dereferenced a number of times already. Instead move
the NULL check to first thing in the function. Also assign NULL to
dflt_dpio after free in both dpio_init and dpio_exit.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In netc_blk_ctrl_probe the test for failure of the function
clk_prepare_enable should not return PTR_ERR(ipg_clk) as it does not
check IS_ERR(ipg_clk) instead it should return err as that is what is
holding the error code in this case.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In memac_wait_until_free and memac_wait_until_done the use of
post-decrement on the test in the while loop for a timeout means that
timeout will be equal to -1 on exit in that case. Adjust the test for
this expected value.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In fm_eth_bind there is a dereference of dev before it is NULL checked.
Add a NULL check before the first dereference and remove a later NULL
check that is now redundant.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In bmi_rx_port_disable and bmi_tx_port_disable the use of post-decrement
on the test in the while loop for a timeout means that timeout will be
equal to -1 on exit in that case. Adjust the test for this expected
value.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In the case of !zq_en zqcs_init is never assigned to although its value
is used. Correct by initialising zqcs_init to 0.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This commit introduces a new API,
request_firmware_into_buf_via_script(), to the fs_loader framework.
This function allows firmware to be loaded into memory using
a user-defined U-Boot script, providing greater flexibility for
firmware loading scenarios that cannot be handled by static file
paths or device/partition selection alone.
Key features:
- The API runs a specified U-Boot script (by name), which is responsible
for loading the firmware into memory by any means (e.g., load from MMC, USB, network, etc.).
- The script must set two environment variables: 'fw_addr'
(the memory address where the firmware is loaded) and
'fw_size' (the size of the firmware in bytes).
- The function validates these variables, copies the firmware into a newly
allocated buffer (using memdup), and returns the pointer
via the provided double pointer argument.
- The maximum allowed firmware size is checked to prevent buffer overflows.
- The environment variables are cleared after use to avoid stale data.
- Detailed error messages are provided for all failure conditions to aid debugging.
Usage example:
1. Define a U-Boot script in the environment that loads the firmware
and sets the required variables:
=> env set my_fw_script 'load mmc 0:1 ${loadaddr} firmware.bin &&
env set fw_addr ${loadaddr} && env set fw_size ${filesize}'
2. In your code, call the new API:
void *fw_buf = NULL;
int ret = request_firmware_into_buf_via_script(&fw_buf, 0x46000000, "my_fw_script");
if (ret < 0)
return ret;
This approach allows board integrators and users to customize the firmware
loading process without modifying the source code,
simply by changing the script in the U-Boot environment.
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[trini: Fix printf of size_t needing to use %zx]
Signed-off-by: Tom Rini <trini@konsulko.com>
Drop SUPPORT_EXTENSION_SCAN and enable PHYTEC_SOM_DETECTION_BLOCKS
to align with other PHYTEC platforms. These options were missed when
phyCORE-AM62Ax support was added.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Use CONFIG_PHYTEC_EEPROM_BUS instead of the hard coded value for the i2c bus.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add the option to choose a different bus number than 0 for the i2c eeprom
based som detection.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Configure RMMI and M-PHY registers for HS mode required for selection of
bit rate series A or B. If it is not a calibrated part, then switch back
to SLOWAUTO_MODE and skip all these configurations.
Implemented below sequence as per the DWC RMMI databook.
1. Override RMMI CBRATESEL with the desired rate.
2. Set TX_CFGUPDT_0 to 1'b1 for one TX_CFGCLK_0 cycle.
3. Override PHY rx_req to 1, then poll on PHY rx_ack register till it
goes 1(both lanes).
4. Override PHY rx_req to 0, then poll on PHY rx_ack register till it
goes 0(both lanes).
5. Remove PHY rx_req override(both lanes).
6. Start the LS PMC.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724044402.260149-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
The existing compatible name for U-Boot's k3 system controller driver
i.e "ti,am625-system-controller" has been added to linux[1] device-tree.
This compatible in kernel is meant for configuring the Control Module
registers (CTRL_MMR0).
However in U-Boot, the matching driver was being used to load the system
firmware on the secure M-cores by the R5 SPL and therefore must be
updated to a different compatible to avoid conflicts.
Therefore, this patch renames all references of the compatible to
"ti,am654-tisci-rproc-r5". The "-r5" is appended so as to avoid any
future conflicts since r5 specific compatibles should only be useful for
U-Boot.
[1]: 5959618631fe ("dt-bindings: mfd: ti,j721e-system-controller: Add compatible string for AM654")
https://lore.kernel.org/r/20250421214620.3770172-2-afd@ti.com
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Add rauc to bootmeths variable if BOOTMETH_RAUC is enabled.
This is setting a proper default for RAUC enabled systems.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Martin Schwan <m.schwan@phytec.de>
Since the bootmeth "rauc" is not a global boot method, do not select the
corresponding BOOTMETH_GLOBAL option.
Signed-off-by: Martin Schwan <m.schwan@phytec.de>
