Bind MDIO controller on Ethernet Controller load. The Airoha AN7581 SoC
have an integrated Switch based on MT7531 (or more saying MT7988).
Attach it to the mdio node in the switch node to support scanning for
MDIO devices on the BUS with DM API.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add the driver for the Airoha EN8811H 2.5 Gigabit PHY. The PHY supports
100/1000/2500 Mbps with auto negotiation only.
The driver uses two firmware files, for which updated versions are added to
linux-firmware already.
Locating the AIROHA FW within the filesystem at the designated partition
and path will trigger its automatic loading and writing to the PHY via MDIO.
If need board specific loading override,
please override the en8811h_read_fw function on board or architecture level.
Based on the Linux upstream AIROHA EN8811H driver code(air_en8811h.c),
I have modified the relevant process to align with the U-Boot boot sequence.
and have validated this on Banana Pi BPI-R3 Mini.
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/28551
- Stop disabling device tree relocation on i.MX boards.
- Add support for imx6ulz_smm_m2d.
- Add support for Kontron i.MX93 OSM-S SoM and BL carrier board
- Fix probe of i.MX FEC MDIO bus for DM_MDIO.
- Cleanup for tqma6 boards.
- Initialize the ELE RNG context on imx95_evk
- Disable EFI partition, MP, sysboot, bind commands on tbs2910.
fdtoverlay_addr_r is the correct variable name according to standardboot
documentation and already used for phycore_imx8mp.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
We want to change the bootdevice dynamically, so that when booting
U-Boot from sdcard, kernel is also preferably booted from sdcard by
default. If the user decides to set their own bootorder, this should not
be overwritten. This was already implemented for imx8mp-libra-fpsc
board, but as we set the default value for boot_targets in devicetree
now, the env_get_default will return NULL. Also env_get might return
NULL when boot_targets is not set. A string compare with NULL is unsafe
and should be avoided. To fix this we only change the env value if the
variable was not set before (NULL), as this is the new default value.
In any other case the user has changed the value so it will not be
overwritten.
Also let standardboot set bootcmd automatically. For this
CONFIG_USE_BOOTCOMMAND needs to be activated.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Standardboot allows setting bootdevices and bootmeths in devicetree.
This is already implemented for imx8mp-libra board.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Add emmc_dev and sd_dev env variables with comment that they are needed
for builtin uuu flash scripts. This is already done for imx8mp-libra
board.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Netboot script is named net_boot_fit.scr.uimg with ampliphy-boot.
fit_fdtconf is not longer needed. The default config is automatically
fetched from the fitImage. mmcroot is also not longer used, the
bootscript has a builtin default. bootenv_addr_r is no longer used, as
the bootenv is loaded into loadaddr.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
- change maintainer e-Mail address
(old is not suitable for plain text mail)
- add TQ mailing list
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
While at it, adjust the TQ-Systems copyright info to include
consistent company information, the mail address to reach all
developers at TQ-Systems for questions regarding U-Boot support
for our SOM and remove author's company mail address not suitable
for plain text mail.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
fix checkpatch warnings
- WARNING: break is not useful after a return
- WARNING: Comparisons should place the constant
on the right side of the test
- WARNING: please write a help paragraph that fully describes
the config symbol with at least 2 lines
Signed-off-by: Paul Gerber <Paul.Gerber@tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
The function `tqma6_iomuxc_spi()` was removed in the commit
"tqma6: Remove non-DM board code".
The original function was overwritten with an empty function in the
WRU4 baseboard and should also have been removed.
Therefore, the function and its call are being removed.
Fixes: 93552cc442 ("tqma6: Remove non-DM board code")
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
The last parameter to device_bind_driver_to_node is optional.
Since the returned information is not used and overwritten by
uclass_get_device_by_ofnode just provide NULL as parameter.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
When using DM_MDIO on SOC with more than one FEC and not sharing the MDIO
bus the name of the driver and the bus needs to be unique. Since name
used in device_bind_driver_to_node needs to be a static string, add the
string to the fec_priv struct and reuse fec_set_dev_name to generate the
name with the device sequence number.
Fixes: 3b8f99a3e7 ("net: fec: add support for DM_MDIO")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
If DM_ETH_PHY is used and the FEC instance owns the shared MDIO bus,
eth_phy_get_mdio_bus returns NULL. If DM_MDIO bus is used, the
mdio_register API is called from dm_mdio_post_probe. Therefore the
bus should must be queried by name in this case.
For DM_MDIO case fec_mii_setspeed has already being called in
dm_fec_mdio_probe(), so skip setting this again.
Fixes: 3b8f99a3e7 ("net: fec: add support for DM_MDIO")
Fixes: e75d08821574 ("net: fec-mxc: prevent crash if no MAC address is set")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
The code should only be executed if MDIO bus is not assigned.
Otherwise the already assigned / allocated bus will be overwritten.
Add condition check and simplify the code to make it more readable.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
If DM_MDIO is used and the FEC device is removed the mdio API
must not be used to remove the bus structure. Store pointer the
the udevice for MDIO bus created by dm_fec_bind_mdio and use DM
functions to cleanup the device in fecmxc_remove.
Fixes: 3b8f99a3e7 ("net: fec: add support for DM_MDIO")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
When initializing the MDIO bus the MDC signal needs to be configured.
Otherwise the communication over the bus may fail. Add the call to
fec_mii_setspeed to the DM_MDIO probe handler.
Fixes: 3b8f99a3e7 ("net: fec: add support for DM_MDIO")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
If no MAC address can be found (either in ROM, device tree or env),
the post_probe of an ethernet device will fail and therefore
the device cannot be instantiated.
The DM_ETH_PHY (eth-phy-uclass) use case must not be mixed with
using CONFIG_FEC_MXC_MDIO_BASE.
This prevents following error for MAC not fused, no eth[1]addr
env is present and providing a random MAC is disabled:
Net:
Error: ethernet@5b040000 address not set.
Error: ethernet@5b040000 address not set.
FEC: can't find phy-handle
"Error" handler, esr 0xbf000002
elr: 000000008004e4b8 lr : 000000008004e4b4 (reloc)
elr: 00000000bfe984b8 lr : 00000000bfe984b4
x0 : 0000000000000000 x1 : 0000000000000020
x2 : 00000000bbe61e50 x3 : 00000000bbe6e1a0
x4 : 0000000000000020 x5 : 0000000000000020
x6 : 000000000000000a x7 : 0000000000000000
x8 : 0000000000000000 x9 : 0000000000000008
x10: 00000000ffffffd8 x11: 0000000000000006
x12: 000000000001869f x13: 0000000000002c50
x14: 0000000000000000 x15: 00000000ffffffff
x16: 0000000000000000 x17: 0000000000000000
x18: 00000000bbe61d98 x19: 00000000bbe4fa68
x20: 00000000bbe78c10 x21: 00000000bbe6e460
x22: 00000000bbe78c10 x23: 00000000bbe91780
x24: 00000000bbe6e510 x25: 00000000000001f8
x26: 00000000ffff8000 x27: 0000000000000000
x28: 0000000000000000 x29: 00000000bbe4fa10
Code: f900003f 9100a3a1 97ffff6e 35000100 (f94017a1)
Resetting CPU ...
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
phy_config may fail - for instance in parsing device tree.
This should be handled correctly. So return errors from
phy_config to caller.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Marek Vasut <marek.vasut@mailbox.org>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
